kevin/linux
1
Fork 0
Code
a988c0a627
linux/arch/powerpc/sysdev
History
Michael Ellerman cdbd3865ac Use dcr_host_t.base in dcr_unmap() 
With the base stored in dcr_host_t, there's no need for callers to pass
the dcr_n into dcr_unmap(). In fact this removes the possibility of them
passing the incorrect value, which would then be iounmap()'ed.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-15 14:29:49 -04:00
..
qe_lib [POWERPC] QE: pario - support for MPC85xx layout 2007-10-08 08:39:01 -05:00
axonram.c missed bio_endio() in axonram 2007-10-11 23:04:25 -07:00
commproc.c [POWERPC] cpm: Describe multi-user ram in its own device node. 2007-10-04 15:47:05 -05:00
commproc.h [POWERPC] 8xx: Infrastructure code cleanup. 2007-10-03 20:36:35 -05:00
cpm2_common.c [POWERPC] cpm: Describe multi-user ram in its own device node. 2007-10-04 15:47:05 -05:00
cpm2_pic.c [POWERPC] cpm2: Infrastructure code cleanup. 2007-10-04 11:02:04 -05:00
cpm2_pic.h [POWERPC] cpm2: CPM2 interrupt controller fix 2007-02-07 14:03:20 +11:00
cpm_common.c [POWERPC] cpm: Describe multi-user ram in its own device node. 2007-10-04 15:47:05 -05:00
dart_iommu.c [POWERPC] Fix section mismatch in dart_iommu.c 2007-08-17 11:02:06 +10:00
dart.h
dcr-low.S
dcr.c Use dcr_host_t.base in dcr_unmap() 2007-10-15 14:29:49 -04:00
fsl_pci.c [POWERPC] FSL: Access PCIe LTSSM register with correct size 2007-10-08 08:38:37 -05:00
fsl_pci.h [POWERPC] Fixup resources on pci_bus for PCIe PHB when no device is connected 2007-07-23 10:27:08 -05:00
fsl_soc.c [POWERPC] spi: Support non-QE processors 2007-10-08 09:05:30 -05:00
fsl_soc.h [POWERPC] 85xx/86xx: refactor RSTCR reset code 2007-10-08 08:38:47 -05:00
grackle.c [POWERPC] Make endianess of cfg_addr for indirect pci ops runtime 2007-07-23 22:29:09 -05:00
i8259.c [POWERPC] Add an optional device_node pointer to the irq_host 2007-09-14 01:33:20 +10:00
indirect_pci.c [POWERPC] PCI: Add 64-bit physical address support to setup_indirect_pci 2007-10-12 14:05:17 +10:00
ipic.c [POWERPC] Add an optional device_node pointer to the irq_host 2007-09-14 01:33:20 +10:00
ipic.h [POWERPC] Add an optional device_node pointer to the irq_host 2007-09-14 01:33:20 +10:00
Makefile [POWERPC] Don't build arch/powerpc/sysdev/dcr.c for ARCH=ppc kernels 2007-10-10 09:14:35 -06:00
micropatch.c [POWERPC] 8xx: powerpc port of core CPM PIC 2007-02-07 14:03:17 +11:00
mmio_nvram.c
mpc8xx_pic.c [POWERPC] 8xx: Infrastructure code cleanup. 2007-10-03 20:36:35 -05:00
mpc8xx_pic.h [POWERPC] 8xx: mpc885ads pcmcia support 2007-07-10 00:33:51 -05:00
mpic_msi.c [POWERPC] Fix section mismatch in PCI code 2007-09-19 15:25:34 +10:00
mpic_u3msi.c [POWERPC] Inline u3msi_compose_msi_msg() 2007-10-03 09:11:42 +10:00
mpic.c Add dcr_host_t.base in dcr_read()/dcr_write() 2007-10-15 14:29:49 -04:00
mpic.h [POWERPC] Support setting affinity for U3/U4 MSI sources 2007-09-22 14:49:22 +10:00
mv64x60_dev.c [WATCHDOG] mv64x60_wdt: Add arch/powerpc platform support 2007-07-24 21:16:02 +00:00
mv64x60_pci.c [POWERPC] Make endianess of cfg_addr for indirect pci ops runtime 2007-07-23 22:29:09 -05:00
mv64x60_pic.c [POWERPC] Provide a default irq_host match, which matches on an exact of_node 2007-09-14 01:33:20 +10:00
mv64x60_udbg.c [POWERPC] Add Marvell mv64x60 udbg putc/getc functions 2007-09-22 14:49:21 +10:00
mv64x60.h [POWERPC] Add Marvell mv64x60 udbg putc/getc functions 2007-09-22 14:49:21 +10:00
pmi.c [POWERPC] Move of_platform_driver initialisations: arch/powerpc 2007-10-11 20:40:49 +10:00
rtc_cmos_setup.c [POWERPC] Add interrupt resource for RTC CMOS driver 2007-08-17 13:18:58 -05:00
tsi108_dev.c [POWERPC] Fix problems with device tree representation of TSI-1xx bridges 2007-06-14 22:30:17 +10:00
tsi108_pci.c [POWERPC] Provide a default irq_host match, which matches on an exact of_node 2007-09-14 01:33:20 +10:00
uic.c [POWERPC] Provide a default irq_host match, which matches on an exact of_node 2007-09-14 01:33:20 +10:00
xilinx_intc.c [POWERPC] Virtex: add xilinx interrupt controller driver 2007-10-03 07:23:14 -05:00