1
linux/drivers/pcmcia/sa1100_jornada720.c
Tim Schmielau cd354f1ae7 [PATCH] remove many unneeded #includes of sched.h
After Al Viro (finally) succeeded in removing the sched.h #include in module.h
recently, it makes sense again to remove other superfluous sched.h includes.
There are quite a lot of files which include it but don't actually need
anything defined in there.  Presumably these includes were once needed for
macros that used to live in sched.h, but moved to other header files in the
course of cleaning it up.

To ease the pain, this time I did not fiddle with any header files and only
removed #includes from .c-files, which tend to cause less trouble.

Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha,
arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig,
allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all
configs in arch/arm/configs on arm.  I also checked that no new warnings were
introduced by the patch (actually, some warnings are removed that were emitted
by unnecessarily included header files).

Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:09:54 -08:00

113 lines
2.7 KiB
C

/*
* drivers/pcmcia/sa1100_jornada720.c
*
* Jornada720 PCMCIA specific routines
*
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/device.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <asm/hardware.h>
#include <asm/hardware/sa1111.h>
#include <asm/mach-types.h>
#include "sa1111_generic.h"
#define SOCKET0_POWER GPIO_GPIO0
#define SOCKET0_3V GPIO_GPIO2
#define SOCKET1_POWER (GPIO_GPIO1 | GPIO_GPIO3)
#warning *** Does SOCKET1_3V actually do anything?
#define SOCKET1_3V GPIO_GPIO3
static int jornada720_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
{
/*
* What is all this crap for?
*/
GRER |= 0x00000002;
/* Set GPIO_A<3:1> to be outputs for PCMCIA/CF power controller: */
sa1111_set_io_dir(SA1111_DEV(skt->dev), GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0, 0);
sa1111_set_io(SA1111_DEV(skt->dev), GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0);
sa1111_set_sleep_io(SA1111_DEV(skt->dev), GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0);
return sa1111_pcmcia_hw_init(skt);
}
static int
jornada720_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_state_t *state)
{
unsigned int pa_dwr_mask, pa_dwr_set;
int ret;
printk("%s(): config socket %d vcc %d vpp %d\n", __FUNCTION__,
skt->nr, state->Vcc, state->Vpp);
switch (skt->nr) {
case 0:
pa_dwr_mask = SOCKET0_POWER | SOCKET0_3V;
switch (state->Vcc) {
default:
case 0: pa_dwr_set = 0; break;
case 33: pa_dwr_set = SOCKET0_POWER | SOCKET0_3V; break;
case 50: pa_dwr_set = SOCKET0_POWER; break;
}
break;
case 1:
pa_dwr_mask = SOCKET1_POWER;
switch (state->Vcc) {
default:
case 0: pa_dwr_set = 0; break;
case 33: pa_dwr_set = SOCKET1_POWER; break;
case 50: pa_dwr_set = SOCKET1_POWER; break;
}
break;
default:
return -1;
}
if (state->Vpp != state->Vcc && state->Vpp != 0) {
printk(KERN_ERR "%s(): slot cannot support VPP %u\n",
__FUNCTION__, state->Vpp);
return -1;
}
ret = sa1111_pcmcia_configure_socket(skt, state);
if (ret == 0) {
unsigned long flags;
local_irq_save(flags);
sa1111_set_io(SA1111_DEV(skt->dev), pa_dwr_mask, pa_dwr_set);
local_irq_restore(flags);
}
return ret;
}
static struct pcmcia_low_level jornada720_pcmcia_ops = {
.owner = THIS_MODULE,
.hw_init = jornada720_pcmcia_hw_init,
.hw_shutdown = sa1111_pcmcia_hw_shutdown,
.socket_state = sa1111_pcmcia_socket_state,
.configure_socket = jornada720_pcmcia_configure_socket,
.socket_init = sa1111_pcmcia_socket_init,
.socket_suspend = sa1111_pcmcia_socket_suspend,
};
int __init pcmcia_jornada720_init(struct device *dev)
{
int ret = -ENODEV;
if (machine_is_jornada720())
ret = sa11xx_drv_pcmcia_probe(dev, &jornada720_pcmcia_ops, 0, 2);
return ret;
}