1
linux/drivers/mfd/exynos-lpass.c
Beomho Seo 3f2d347e85 mfd: exynos-lpass: Enable UART module support
This patch enables proper interrupts routing between UART module
in Exynos Audio SubSystem and the rest of the SoC. This routing is
completely transparent for UART device and CPU/GIC. UART driver requests
interrupts from the respective controller and enables/masks/handles it
by itself via standard methods.

There are boards (for example TM2), which use UART module in Exynos Audio
SubStem for communication with BlueTooth chip.

Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
[mszyprow: rephrased commit message, added UART reset]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-01-03 08:32:42 +00:00

202 lines
5.3 KiB
C

/*
* Copyright (C) 2015 - 2016 Samsung Electronics Co., Ltd.
*
* Authors: Inha Song <ideal.song@samsung.com>
* Sylwester Nawrocki <s.nawrocki@samsung.com>
*
* Samsung Exynos SoC series Low Power Audio Subsystem driver.
*
* This module provides regmap for the Top SFR region and instantiates
* devices for IP blocks like DMAC, I2S, UART.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*/
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/mfd/syscon.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/regmap.h>
#include <linux/soc/samsung/exynos-regs-pmu.h>
#include <linux/types.h>
/* LPASS Top register definitions */
#define SFR_LPASS_CORE_SW_RESET 0x08
#define LPASS_SB_SW_RESET BIT(11)
#define LPASS_UART_SW_RESET BIT(10)
#define LPASS_PCM_SW_RESET BIT(9)
#define LPASS_I2S_SW_RESET BIT(8)
#define LPASS_WDT1_SW_RESET BIT(4)
#define LPASS_WDT0_SW_RESET BIT(3)
#define LPASS_TIMER_SW_RESET BIT(2)
#define LPASS_MEM_SW_RESET BIT(1)
#define LPASS_DMA_SW_RESET BIT(0)
#define SFR_LPASS_INTR_CA5_MASK 0x48
#define SFR_LPASS_INTR_CPU_MASK 0x58
#define LPASS_INTR_APM BIT(9)
#define LPASS_INTR_MIF BIT(8)
#define LPASS_INTR_TIMER BIT(7)
#define LPASS_INTR_DMA BIT(6)
#define LPASS_INTR_GPIO BIT(5)
#define LPASS_INTR_I2S BIT(4)
#define LPASS_INTR_PCM BIT(3)
#define LPASS_INTR_SLIMBUS BIT(2)
#define LPASS_INTR_UART BIT(1)
#define LPASS_INTR_SFR BIT(0)
struct exynos_lpass {
/* pointer to the LPASS TOP regmap */
struct regmap *top;
struct clk *sfr0_clk;
};
static void exynos_lpass_core_sw_reset(struct exynos_lpass *lpass, int mask)
{
unsigned int val = 0;
regmap_read(lpass->top, SFR_LPASS_CORE_SW_RESET, &val);
val &= ~mask;
regmap_write(lpass->top, SFR_LPASS_CORE_SW_RESET, val);
usleep_range(100, 150);
val |= mask;
regmap_write(lpass->top, SFR_LPASS_CORE_SW_RESET, val);
}
static void exynos_lpass_enable(struct exynos_lpass *lpass)
{
clk_prepare_enable(lpass->sfr0_clk);
/* Unmask SFR, DMA and I2S interrupt */
regmap_write(lpass->top, SFR_LPASS_INTR_CA5_MASK,
LPASS_INTR_SFR | LPASS_INTR_DMA | LPASS_INTR_I2S);
regmap_write(lpass->top, SFR_LPASS_INTR_CPU_MASK,
LPASS_INTR_SFR | LPASS_INTR_DMA | LPASS_INTR_I2S |
LPASS_INTR_UART);
exynos_lpass_core_sw_reset(lpass, LPASS_I2S_SW_RESET);
exynos_lpass_core_sw_reset(lpass, LPASS_DMA_SW_RESET);
exynos_lpass_core_sw_reset(lpass, LPASS_MEM_SW_RESET);
exynos_lpass_core_sw_reset(lpass, LPASS_UART_SW_RESET);
}
static void exynos_lpass_disable(struct exynos_lpass *lpass)
{
/* Mask any unmasked IP interrupt sources */
regmap_write(lpass->top, SFR_LPASS_INTR_CPU_MASK, 0);
regmap_write(lpass->top, SFR_LPASS_INTR_CA5_MASK, 0);
clk_disable_unprepare(lpass->sfr0_clk);
}
static const struct regmap_config exynos_lpass_reg_conf = {
.reg_bits = 32,
.reg_stride = 4,
.val_bits = 32,
.max_register = 0xfc,
.fast_io = true,
};
static int exynos_lpass_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct exynos_lpass *lpass;
void __iomem *base_top;
struct resource *res;
lpass = devm_kzalloc(dev, sizeof(*lpass), GFP_KERNEL);
if (!lpass)
return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
base_top = devm_ioremap_resource(dev, res);
if (IS_ERR(base_top))
return PTR_ERR(base_top);
lpass->sfr0_clk = devm_clk_get(dev, "sfr0_ctrl");
if (IS_ERR(lpass->sfr0_clk))
return PTR_ERR(lpass->sfr0_clk);
lpass->top = regmap_init_mmio(dev, base_top,
&exynos_lpass_reg_conf);
if (IS_ERR(lpass->top)) {
dev_err(dev, "LPASS top regmap initialization failed\n");
return PTR_ERR(lpass->top);
}
platform_set_drvdata(pdev, lpass);
pm_runtime_set_active(dev);
pm_runtime_enable(dev);
exynos_lpass_enable(lpass);
return devm_of_platform_populate(dev);
}
static int exynos_lpass_remove(struct platform_device *pdev)
{
struct exynos_lpass *lpass = platform_get_drvdata(pdev);
exynos_lpass_disable(lpass);
pm_runtime_disable(&pdev->dev);
if (!pm_runtime_status_suspended(&pdev->dev))
exynos_lpass_disable(lpass);
regmap_exit(lpass->top);
return 0;
}
static int __maybe_unused exynos_lpass_suspend(struct device *dev)
{
struct exynos_lpass *lpass = dev_get_drvdata(dev);
exynos_lpass_disable(lpass);
return 0;
}
static int __maybe_unused exynos_lpass_resume(struct device *dev)
{
struct exynos_lpass *lpass = dev_get_drvdata(dev);
exynos_lpass_enable(lpass);
return 0;
}
static const struct dev_pm_ops lpass_pm_ops = {
SET_RUNTIME_PM_OPS(exynos_lpass_suspend, exynos_lpass_resume, NULL)
SET_LATE_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
pm_runtime_force_resume)
};
static const struct of_device_id exynos_lpass_of_match[] = {
{ .compatible = "samsung,exynos5433-lpass" },
{ },
};
MODULE_DEVICE_TABLE(of, exynos_lpass_of_match);
static struct platform_driver exynos_lpass_driver = {
.driver = {
.name = "exynos-lpass",
.pm = &lpass_pm_ops,
.of_match_table = exynos_lpass_of_match,
},
.probe = exynos_lpass_probe,
.remove = exynos_lpass_remove,
};
module_platform_driver(exynos_lpass_driver);
MODULE_DESCRIPTION("Samsung Low Power Audio Subsystem driver");
MODULE_LICENSE("GPL v2");