89a056df78
Acked-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
372 lines
15 KiB
XML
372 lines
15 KiB
XML
<?xml version="1.0" encoding="UTF-8"?>
|
|
<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
|
|
"http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
|
|
|
|
<book id="Z85230Guide">
|
|
<bookinfo>
|
|
<title>Z8530 Programming Guide</title>
|
|
|
|
<authorgroup>
|
|
<author>
|
|
<firstname>Alan</firstname>
|
|
<surname>Cox</surname>
|
|
<affiliation>
|
|
<address>
|
|
<email>alan@lxorguk.ukuu.org.uk</email>
|
|
</address>
|
|
</affiliation>
|
|
</author>
|
|
</authorgroup>
|
|
|
|
<copyright>
|
|
<year>2000</year>
|
|
<holder>Alan Cox</holder>
|
|
</copyright>
|
|
|
|
<legalnotice>
|
|
<para>
|
|
This documentation is free software; you can redistribute
|
|
it and/or modify it under the terms of the GNU General Public
|
|
License as published by the Free Software Foundation; either
|
|
version 2 of the License, or (at your option) any later
|
|
version.
|
|
</para>
|
|
|
|
<para>
|
|
This program is distributed in the hope that it will be
|
|
useful, but WITHOUT ANY WARRANTY; without even the implied
|
|
warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
|
See the GNU General Public License for more details.
|
|
</para>
|
|
|
|
<para>
|
|
You should have received a copy of the GNU General Public
|
|
License along with this program; if not, write to the Free
|
|
Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
MA 02111-1307 USA
|
|
</para>
|
|
|
|
<para>
|
|
For more details see the file COPYING in the source
|
|
distribution of Linux.
|
|
</para>
|
|
</legalnotice>
|
|
</bookinfo>
|
|
|
|
<toc></toc>
|
|
|
|
<chapter id="intro">
|
|
<title>Introduction</title>
|
|
<para>
|
|
The Z85x30 family synchronous/asynchronous controller chips are
|
|
used on a large number of cheap network interface cards. The
|
|
kernel provides a core interface layer that is designed to make
|
|
it easy to provide WAN services using this chip.
|
|
</para>
|
|
<para>
|
|
The current driver only support synchronous operation. Merging the
|
|
asynchronous driver support into this code to allow any Z85x30
|
|
device to be used as both a tty interface and as a synchronous
|
|
controller is a project for Linux post the 2.4 release
|
|
</para>
|
|
</chapter>
|
|
|
|
<chapter id="Driver_Modes">
|
|
<title>Driver Modes</title>
|
|
<para>
|
|
The Z85230 driver layer can drive Z8530, Z85C30 and Z85230 devices
|
|
in three different modes. Each mode can be applied to an individual
|
|
channel on the chip (each chip has two channels).
|
|
</para>
|
|
<para>
|
|
The PIO synchronous mode supports the most common Z8530 wiring. Here
|
|
the chip is interface to the I/O and interrupt facilities of the
|
|
host machine but not to the DMA subsystem. When running PIO the
|
|
Z8530 has extremely tight timing requirements. Doing high speeds,
|
|
even with a Z85230 will be tricky. Typically you should expect to
|
|
achieve at best 9600 baud with a Z8C530 and 64Kbits with a Z85230.
|
|
</para>
|
|
<para>
|
|
The DMA mode supports the chip when it is configured to use dual DMA
|
|
channels on an ISA bus. The better cards tend to support this mode
|
|
of operation for a single channel. With DMA running the Z85230 tops
|
|
out when it starts to hit ISA DMA constraints at about 512Kbits. It
|
|
is worth noting here that many PC machines hang or crash when the
|
|
chip is driven fast enough to hold the ISA bus solid.
|
|
</para>
|
|
<para>
|
|
Transmit DMA mode uses a single DMA channel. The DMA channel is used
|
|
for transmission as the transmit FIFO is smaller than the receive
|
|
FIFO. it gives better performance than pure PIO mode but is nowhere
|
|
near as ideal as pure DMA mode.
|
|
</para>
|
|
</chapter>
|
|
|
|
<chapter id="Using_the_Z85230_driver">
|
|
<title>Using the Z85230 driver</title>
|
|
<para>
|
|
The Z85230 driver provides the back end interface to your board. To
|
|
configure a Z8530 interface you need to detect the board and to
|
|
identify its ports and interrupt resources. It is also your problem
|
|
to verify the resources are available.
|
|
</para>
|
|
<para>
|
|
Having identified the chip you need to fill in a struct z8530_dev,
|
|
which describes each chip. This object must exist until you finally
|
|
shutdown the board. Firstly zero the active field. This ensures
|
|
nothing goes off without you intending it. The irq field should
|
|
be set to the interrupt number of the chip. (Each chip has a single
|
|
interrupt source rather than each channel). You are responsible
|
|
for allocating the interrupt line. The interrupt handler should be
|
|
set to <function>z8530_interrupt</function>. The device id should
|
|
be set to the z8530_dev structure pointer. Whether the interrupt can
|
|
be shared or not is board dependent, and up to you to initialise.
|
|
</para>
|
|
<para>
|
|
The structure holds two channel structures.
|
|
Initialise chanA.ctrlio and chanA.dataio with the address of the
|
|
control and data ports. You can or this with Z8530_PORT_SLEEP to
|
|
indicate your interface needs the 5uS delay for chip settling done
|
|
in software. The PORT_SLEEP option is architecture specific. Other
|
|
flags may become available on future platforms, eg for MMIO.
|
|
Initialise the chanA.irqs to &z8530_nop to start the chip up
|
|
as disabled and discarding interrupt events. This ensures that
|
|
stray interrupts will be mopped up and not hang the bus. Set
|
|
chanA.dev to point to the device structure itself. The
|
|
private and name field you may use as you wish. The private field
|
|
is unused by the Z85230 layer. The name is used for error reporting
|
|
and it may thus make sense to make it match the network name.
|
|
</para>
|
|
<para>
|
|
Repeat the same operation with the B channel if your chip has
|
|
both channels wired to something useful. This isn't always the
|
|
case. If it is not wired then the I/O values do not matter, but
|
|
you must initialise chanB.dev.
|
|
</para>
|
|
<para>
|
|
If your board has DMA facilities then initialise the txdma and
|
|
rxdma fields for the relevant channels. You must also allocate the
|
|
ISA DMA channels and do any necessary board level initialisation
|
|
to configure them. The low level driver will do the Z8530 and
|
|
DMA controller programming but not board specific magic.
|
|
</para>
|
|
<para>
|
|
Having initialised the device you can then call
|
|
<function>z8530_init</function>. This will probe the chip and
|
|
reset it into a known state. An identification sequence is then
|
|
run to identify the chip type. If the checks fail to pass the
|
|
function returns a non zero error code. Typically this indicates
|
|
that the port given is not valid. After this call the
|
|
type field of the z8530_dev structure is initialised to either
|
|
Z8530, Z85C30 or Z85230 according to the chip found.
|
|
</para>
|
|
<para>
|
|
Once you have called z8530_init you can also make use of the utility
|
|
function <function>z8530_describe</function>. This provides a
|
|
consistent reporting format for the Z8530 devices, and allows all
|
|
the drivers to provide consistent reporting.
|
|
</para>
|
|
</chapter>
|
|
|
|
<chapter id="Attaching_Network_Interfaces">
|
|
<title>Attaching Network Interfaces</title>
|
|
<para>
|
|
If you wish to use the network interface facilities of the driver,
|
|
then you need to attach a network device to each channel that is
|
|
present and in use. In addition to use the generic HDLC
|
|
you need to follow some additional plumbing rules. They may seem
|
|
complex but a look at the example hostess_sv11 driver should
|
|
reassure you.
|
|
</para>
|
|
<para>
|
|
The network device used for each channel should be pointed to by
|
|
the netdevice field of each channel. The hdlc-> priv field of the
|
|
network device points to your private data - you will need to be
|
|
able to find your private data from this.
|
|
</para>
|
|
<para>
|
|
The way most drivers approach this particular problem is to
|
|
create a structure holding the Z8530 device definition and
|
|
put that into the private field of the network device. The
|
|
network device fields of the channels then point back to the
|
|
network devices.
|
|
</para>
|
|
<para>
|
|
If you wish to use the generic HDLC then you need to register
|
|
the HDLC device.
|
|
</para>
|
|
<para>
|
|
Before you register your network device you will also need to
|
|
provide suitable handlers for most of the network device callbacks.
|
|
See the network device documentation for more details on this.
|
|
</para>
|
|
</chapter>
|
|
|
|
<chapter id="Configuring_And_Activating_The_Port">
|
|
<title>Configuring And Activating The Port</title>
|
|
<para>
|
|
The Z85230 driver provides helper functions and tables to load the
|
|
port registers on the Z8530 chips. When programming the register
|
|
settings for a channel be aware that the documentation recommends
|
|
initialisation orders. Strange things happen when these are not
|
|
followed.
|
|
</para>
|
|
<para>
|
|
<function>z8530_channel_load</function> takes an array of
|
|
pairs of initialisation values in an array of u8 type. The first
|
|
value is the Z8530 register number. Add 16 to indicate the alternate
|
|
register bank on the later chips. The array is terminated by a 255.
|
|
</para>
|
|
<para>
|
|
The driver provides a pair of public tables. The
|
|
z8530_hdlc_kilostream table is for the UK 'Kilostream' service and
|
|
also happens to cover most other end host configurations. The
|
|
z8530_hdlc_kilostream_85230 table is the same configuration using
|
|
the enhancements of the 85230 chip. The configuration loaded is
|
|
standard NRZ encoded synchronous data with HDLC bitstuffing. All
|
|
of the timing is taken from the other end of the link.
|
|
</para>
|
|
<para>
|
|
When writing your own tables be aware that the driver internally
|
|
tracks register values. It may need to reload values. You should
|
|
therefore be sure to set registers 1-7, 9-11, 14 and 15 in all
|
|
configurations. Where the register settings depend on DMA selection
|
|
the driver will update the bits itself when you open or close.
|
|
Loading a new table with the interface open is not recommended.
|
|
</para>
|
|
<para>
|
|
There are three standard configurations supported by the core
|
|
code. In PIO mode the interface is programmed up to use
|
|
interrupt driven PIO. This places high demands on the host processor
|
|
to avoid latency. The driver is written to take account of latency
|
|
issues but it cannot avoid latencies caused by other drivers,
|
|
notably IDE in PIO mode. Because the drivers allocate buffers you
|
|
must also prevent MTU changes while the port is open.
|
|
</para>
|
|
<para>
|
|
Once the port is open it will call the rx_function of each channel
|
|
whenever a completed packet arrived. This is invoked from
|
|
interrupt context and passes you the channel and a network
|
|
buffer (struct sk_buff) holding the data. The data includes
|
|
the CRC bytes so most users will want to trim the last two
|
|
bytes before processing the data. This function is very timing
|
|
critical. When you wish to simply discard data the support
|
|
code provides the function <function>z8530_null_rx</function>
|
|
to discard the data.
|
|
</para>
|
|
<para>
|
|
To active PIO mode sending and receiving the <function>
|
|
z8530_sync_open</function> is called. This expects to be passed
|
|
the network device and the channel. Typically this is called from
|
|
your network device open callback. On a failure a non zero error
|
|
status is returned. The <function>z8530_sync_close</function>
|
|
function shuts down a PIO channel. This must be done before the
|
|
channel is opened again and before the driver shuts down
|
|
and unloads.
|
|
</para>
|
|
<para>
|
|
The ideal mode of operation is dual channel DMA mode. Here the
|
|
kernel driver will configure the board for DMA in both directions.
|
|
The driver also handles ISA DMA issues such as controller
|
|
programming and the memory range limit for you. This mode is
|
|
activated by calling the <function>z8530_sync_dma_open</function>
|
|
function. On failure a non zero error value is returned.
|
|
Once this mode is activated it can be shut down by calling the
|
|
<function>z8530_sync_dma_close</function>. You must call the close
|
|
function matching the open mode you used.
|
|
</para>
|
|
<para>
|
|
The final supported mode uses a single DMA channel to drive the
|
|
transmit side. As the Z85C30 has a larger FIFO on the receive
|
|
channel this tends to increase the maximum speed a little.
|
|
This is activated by calling the <function>z8530_sync_txdma_open
|
|
</function>. This returns a non zero error code on failure. The
|
|
<function>z8530_sync_txdma_close</function> function closes down
|
|
the Z8530 interface from this mode.
|
|
</para>
|
|
</chapter>
|
|
|
|
<chapter id="Network_Layer_Functions">
|
|
<title>Network Layer Functions</title>
|
|
<para>
|
|
The Z8530 layer provides functions to queue packets for
|
|
transmission. The driver internally buffers the frame currently
|
|
being transmitted and one further frame (in order to keep back
|
|
to back transmission running). Any further buffering is up to
|
|
the caller.
|
|
</para>
|
|
<para>
|
|
The function <function>z8530_queue_xmit</function> takes a network
|
|
buffer in sk_buff format and queues it for transmission. The
|
|
caller must provide the entire packet with the exception of the
|
|
bitstuffing and CRC. This is normally done by the caller via
|
|
the generic HDLC interface layer. It returns 0 if the buffer has been
|
|
queued and non zero values for queue full. If the function accepts
|
|
the buffer it becomes property of the Z8530 layer and the caller
|
|
should not free it.
|
|
</para>
|
|
<para>
|
|
The function <function>z8530_get_stats</function> returns a pointer
|
|
to an internally maintained per interface statistics block. This
|
|
provides most of the interface code needed to implement the network
|
|
layer get_stats callback.
|
|
</para>
|
|
</chapter>
|
|
|
|
<chapter id="Porting_The_Z8530_Driver">
|
|
<title>Porting The Z8530 Driver</title>
|
|
<para>
|
|
The Z8530 driver is written to be portable. In DMA mode it makes
|
|
assumptions about the use of ISA DMA. These are probably warranted
|
|
in most cases as the Z85230 in particular was designed to glue to PC
|
|
type machines. The PIO mode makes no real assumptions.
|
|
</para>
|
|
<para>
|
|
Should you need to retarget the Z8530 driver to another architecture
|
|
the only code that should need changing are the port I/O functions.
|
|
At the moment these assume PC I/O port accesses. This may not be
|
|
appropriate for all platforms. Replacing
|
|
<function>z8530_read_port</function> and <function>z8530_write_port
|
|
</function> is intended to be all that is required to port this
|
|
driver layer.
|
|
</para>
|
|
</chapter>
|
|
|
|
<chapter id="bugs">
|
|
<title>Known Bugs And Assumptions</title>
|
|
<para>
|
|
<variablelist>
|
|
<varlistentry><term>Interrupt Locking</term>
|
|
<listitem>
|
|
<para>
|
|
The locking in the driver is done via the global cli/sti lock. This
|
|
makes for relatively poor SMP performance. Switching this to use a
|
|
per device spin lock would probably materially improve performance.
|
|
</para>
|
|
</listitem></varlistentry>
|
|
|
|
<varlistentry><term>Occasional Failures</term>
|
|
<listitem>
|
|
<para>
|
|
We have reports of occasional failures when run for very long
|
|
periods of time and the driver starts to receive junk frames. At
|
|
the moment the cause of this is not clear.
|
|
</para>
|
|
</listitem></varlistentry>
|
|
</variablelist>
|
|
|
|
</para>
|
|
</chapter>
|
|
|
|
<chapter id="pubfunctions">
|
|
<title>Public Functions Provided</title>
|
|
!Edrivers/net/wan/z85230.c
|
|
</chapter>
|
|
|
|
<chapter id="intfunctions">
|
|
<title>Internal Functions</title>
|
|
!Idrivers/net/wan/z85230.c
|
|
</chapter>
|
|
|
|
</book>
|