1
linux/Documentation/video4linux
Lucas De Marchi 970e248649 Documentation: remove references to /etc/modprobe.conf
Usage of /etc/modprobe.conf file was deprecated by module-init-tools and
is no longer parsed by new kmod tool. References to this file are
replaced in Documentation, comments and Kconfig according to the
context.

There are also some references to the old /etc/modules.conf from 2.4
kernels that are being removed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-30 16:03:15 -07:00
..
bttv Documentation: remove references to /etc/modprobe.conf 2012-03-30 16:03:15 -07:00
cx88
cx2341x
.gitignore
API.html [media] V4L1 API has been moved into "legacy" on the linuxtv.org site 2011-07-27 17:53:08 -03:00
cafe_ccic
CARDLIST.au0828 [media] update Documentation/video4linux/CARDLIST.* 2011-12-30 17:25:31 -02:00
CARDLIST.bttv [media] update Documentation/video4linux/CARDLIST.* 2011-12-30 17:25:31 -02:00
CARDLIST.cx88 [media] Documentation: Update some card lists 2012-03-08 11:01:36 -03:00
CARDLIST.cx23885 [media] Documentation: Update some card lists 2012-03-08 11:01:36 -03:00
CARDLIST.em28xx [media] update CARDLIST.em28xx 2012-03-19 23:12:02 -03:00
CARDLIST.ivtv
CARDLIST.saa7134 [media] Documentation: Update some card lists 2012-03-08 11:01:36 -03:00
CARDLIST.saa7164 [media] Update some CARDLIST's 2011-11-07 12:01:49 -02:00
CARDLIST.tm6000 [media] move tm6000 to drivers/media/video 2011-09-23 09:32:35 -03:00
CARDLIST.tuner [media] Documentation: Update some card lists 2012-03-08 11:01:36 -03:00
CARDLIST.usbvision [media] Update several cardlists 2011-07-27 17:52:16 -03:00
cpia2_overview.txt
CQcam.txt Documentation: remove references to /etc/modprobe.conf 2012-03-30 16:03:15 -07:00
cx18.txt
et61x251.txt
extract_xc3028.pl
fimc.txt [media] s5p-fimc: Add driver documentation 2012-03-01 17:13:02 -03:00
gspca.txt [media] gspca - pac7302: Add new webcam 06f8:301b 2012-03-08 07:57:35 -03:00
hauppauge-wintv-cx88-ir.txt
ibmcam.txt
lifeview.txt
m5602.txt
meye.txt Documentation: remove references to /etc/modprobe.conf 2012-03-30 16:03:15 -07:00
not-in-cx2388x-datasheet.txt
omap3isp.txt [media] omap3isp: ccdc: Use generic frame sync event instead of private HS_VS event 2011-08-29 12:38:51 -03:00
ov511.txt
pxa_camera.txt
radiotrack.txt
README.cpia2
README.cx88
README.davinci-vpbe [media] davinci vpbe: Readme text for Dm6446 vpbe 2011-07-27 17:53:10 -03:00
README.ir
README.ivtv
README.pvrusb2
README.saa7134
README.tlg2300
se401.txt
sh_mobile_ceu_camera.txt
si470x.txt
si4713.txt
sn9c102.txt
soc-camera.txt
stv680.txt
uvcvideo.txt Documentation: Fix multiple typo in Documentation 2012-03-07 16:08:24 +01:00
v4l2-controls.txt [media] V4L2 Spec: fix extended control documentation 2012-01-16 09:37:53 -02:00
v4l2-framework.txt [media] v4l2 framework doc: clarify locking 2011-11-25 15:07:54 -02:00
videobuf
w9966.txt
w9968cf.txt
zc0301.txt
Zoran Documentation: remove references to /etc/modprobe.conf 2012-03-30 16:03:15 -07:00
zr364xx.txt

tlg2300 release notes
====================

This is a v4l2/dvb device driver for the tlg2300 chip.


current status
==============

video
	- support mmap and read().(no overlay)

audio
	- The driver will register a ALSA card for the audio input.

vbi
	- Works for almost TV norms.

dvb-t
	- works for DVB-T

FM
	- Works for radio.

---------------------------------------------------------------------------
TESTED APPLICATIONS:

-VLC1.0.4 test the video and dvb. The GUI is friendly to use.

-Mplayer test the video.

-Mplayer test the FM. The mplayer should be compiled with --enable-radio and
	 --enable-radio-capture.
	The command runs as this(The alsa audio registers to card 1):
	#mplayer radio://103.7/capture/ -radio adevice=hw=1,0:arate=48000 \
		-rawaudio rate=48000:channels=2

---------------------------------------------------------------------------
KNOWN PROBLEMS:
about preemphasis:
	You can set the preemphasis for radio by the following command:
	#v4l2-ctl -d /dev/radio0 --set-ctrl=pre_emphasis_settings=1

	"pre_emphasis_settings=1" means that you select the 50us. If you want
	to select the 75us, please use "pre_emphasis_settings=2"