kevin/linux
1
Fork 0
Code
a18eaf02c8
linux/drivers/media/video/pvrusb2/pvrusb2-devattr.c
Michael Krufky a18eaf02c8 V4L/DVB (12874): pvrusb2: disable tda18271 slave tuner output / loop thru in standby mode 
Enable the standby mode optimization to disable the tda18271
slave tuner output / loop thru options when in low power mode

Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19 00:13:57 -03:00

531 lines
15 KiB
C
Raw Blame History

/*
*
*
* Copyright (C) 2007 Mike Isely <isely@pobox.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
/*
This source file should encompass ALL per-device type information for the
driver. To define a new device, add elements to the pvr2_device_table and
pvr2_device_desc structures.
*/
#include "pvrusb2-devattr.h"
#include <linux/usb.h>
/* This is needed in order to pull in tuner type ids... */
#include <linux/i2c.h>
#include <media/tuner.h>
#ifdef CONFIG_VIDEO_PVRUSB2_DVB
#include "pvrusb2-hdw-internal.h"
#include "lgdt330x.h"
#include "s5h1409.h"
#include "s5h1411.h"
#include "tda10048.h"
#include "tda18271.h"
#include "tda8290.h"
#include "tuner-simple.h"
#endif
/*------------------------------------------------------------------------*/
/* Hauppauge PVR-USB2 Model 29xxx */
static const struct pvr2_device_client_desc pvr2_cli_29xxx[] = {
{ .module_id = PVR2_CLIENT_ID_SAA7115 },
{ .module_id = PVR2_CLIENT_ID_MSP3400 },
{ .module_id = PVR2_CLIENT_ID_TUNER },
{ .module_id = PVR2_CLIENT_ID_DEMOD },
};
static const char *pvr2_fw1_names_29xxx[] = {
"v4l-pvrusb2-29xxx-01.fw",
};
static const struct pvr2_device_desc pvr2_device_29xxx = {
.description = "WinTV PVR USB2 Model Category 29xxx",
.shortname = "29xxx",
.client_table.lst = pvr2_cli_29xxx,
.client_table.cnt = ARRAY_SIZE(pvr2_cli_29xxx),
.fx2_firmware.lst = pvr2_fw1_names_29xxx,
.fx2_firmware.cnt = ARRAY_SIZE(pvr2_fw1_names_29xxx),
.flag_has_hauppauge_rom = !0,
.flag_has_analogtuner = !0,
.flag_has_fmradio = !0,
.flag_has_composite = !0,
.flag_has_svideo = !0,
.signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE,
.led_scheme = PVR2_LED_SCHEME_HAUPPAUGE,
.ir_scheme = PVR2_IR_SCHEME_29XXX,
};
/*------------------------------------------------------------------------*/
/* Hauppauge PVR-USB2 Model 24xxx */
static const struct pvr2_device_client_desc pvr2_cli_24xxx[] = {
{ .module_id = PVR2_CLIENT_ID_CX25840 },
{ .module_id = PVR2_CLIENT_ID_TUNER },
{ .module_id = PVR2_CLIENT_ID_WM8775 },
{ .module_id = PVR2_CLIENT_ID_DEMOD },
};
static const char *pvr2_fw1_names_24xxx[] = {
"v4l-pvrusb2-24xxx-01.fw",
};
static const struct pvr2_device_desc pvr2_device_24xxx = {
.description = "WinTV PVR USB2 Model Category 24xxx",
.shortname = "24xxx",
.client_table.lst = pvr2_cli_24xxx,
.client_table.cnt = ARRAY_SIZE(pvr2_cli_24xxx),
.fx2_firmware.lst = pvr2_fw1_names_24xxx,
.fx2_firmware.cnt = ARRAY_SIZE(pvr2_fw1_names_24xxx),
.flag_has_cx25840 = !0,
.flag_has_wm8775 = !0,
.flag_has_hauppauge_rom = !0,
.flag_has_analogtuner = !0,
.flag_has_fmradio = !0,
.flag_has_composite = !0,
.flag_has_svideo = !0,
.signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE,
.led_scheme = PVR2_LED_SCHEME_HAUPPAUGE,
.ir_scheme = PVR2_IR_SCHEME_24XXX,
};
/*------------------------------------------------------------------------*/
/* GOTVIEW USB2.0 DVD2 */
static const struct pvr2_device_client_desc pvr2_cli_gotview_2[] = {
{ .module_id = PVR2_CLIENT_ID_CX25840 },
{ .module_id = PVR2_CLIENT_ID_TUNER },
};
static const struct pvr2_device_desc pvr2_device_gotview_2 = {
.description = "Gotview USB 2.0 DVD 2",
.shortname = "gv2",
.client_table.lst = pvr2_cli_gotview_2,
.client_table.cnt = ARRAY_SIZE(pvr2_cli_gotview_2),
.flag_has_cx25840 = !0,
.default_tuner_type = TUNER_PHILIPS_FM1216ME_MK3,
.flag_has_analogtuner = !0,
.flag_has_fmradio = !0,
.flag_has_composite = !0,
.flag_has_svideo = !0,
.signal_routing_scheme = PVR2_ROUTING_SCHEME_GOTVIEW,
};
/*------------------------------------------------------------------------*/
/* GOTVIEW USB2.0 DVD Deluxe */
/* (same module list as gotview_2) */
static const struct pvr2_device_desc pvr2_device_gotview_2d = {
.description = "Gotview USB 2.0 DVD Deluxe",
.shortname = "gv2d",
.client_table.lst = pvr2_cli_gotview_2,
.client_table.cnt = ARRAY_SIZE(pvr2_cli_gotview_2),
.flag_has_cx25840 = !0,
.default_tuner_type = TUNER_PHILIPS_FM1216ME_MK3,
.flag_has_analogtuner = !0,
.flag_has_composite = !0,
.flag_has_svideo = !0,
.signal_routing_scheme = PVR2_ROUTING_SCHEME_GOTVIEW,
};
/*------------------------------------------------------------------------*/
/* OnAir Creator */
#ifdef CONFIG_VIDEO_PVRUSB2_DVB
static struct lgdt330x_config pvr2_lgdt3303_config = {
.demod_address = 0x0e,
.demod_chip = LGDT3303,
.clock_polarity_flip = 1,
};
static int pvr2_lgdt3303_attach(struct pvr2_dvb_adapter *adap)
{
adap->fe = dvb_attach(lgdt330x_attach, &pvr2_lgdt3303_config,
&adap->channel.hdw->i2c_adap);
if (adap->fe)
return 0;
return -EIO;
}
static int pvr2_lgh06xf_attach(struct pvr2_dvb_adapter *adap)
{
dvb_attach(simple_tuner_attach, adap->fe,
&adap->channel.hdw->i2c_adap, 0x61,
TUNER_LG_TDVS_H06XF);
return 0;
}
static const struct pvr2_dvb_props pvr2_onair_creator_fe_props = {
.frontend_attach = pvr2_lgdt3303_attach,
.tuner_attach = pvr2_lgh06xf_attach,
};
#endif
static const struct pvr2_device_client_desc pvr2_cli_onair_creator[] = {
{ .module_id = PVR2_CLIENT_ID_SAA7115 },
{ .module_id = PVR2_CLIENT_ID_CS53L32A },
{ .module_id = PVR2_CLIENT_ID_TUNER },
};
static const struct pvr2_device_desc pvr2_device_onair_creator = {
.description = "OnAir Creator Hybrid USB tuner",
.shortname = "oac",
.client_table.lst = pvr2_cli_onair_creator,
.client_table.cnt = ARRAY_SIZE(pvr2_cli_onair_creator),
.default_tuner_type = TUNER_LG_TDVS_H06XF,
.flag_has_analogtuner = !0,
.flag_has_composite = !0,
.flag_has_svideo = !0,
.flag_digital_requires_cx23416 = !0,
.signal_routing_scheme = PVR2_ROUTING_SCHEME_ONAIR,
.digital_control_scheme = PVR2_DIGITAL_SCHEME_ONAIR,
.default_std_mask = V4L2_STD_NTSC_M,
#ifdef CONFIG_VIDEO_PVRUSB2_DVB
.dvb_props = &pvr2_onair_creator_fe_props,
#endif
};
/*------------------------------------------------------------------------*/
/* OnAir USB 2.0 */
#ifdef CONFIG_VIDEO_PVRUSB2_DVB
static struct lgdt330x_config pvr2_lgdt3302_config = {
.demod_address = 0x0e,
.demod_chip = LGDT3302,
};
static int pvr2_lgdt3302_attach(struct pvr2_dvb_adapter *adap)
{
adap->fe = dvb_attach(lgdt330x_attach, &pvr2_lgdt3302_config,
&adap->channel.hdw->i2c_adap);
if (adap->fe)
return 0;
return -EIO;
}
static int pvr2_fcv1236d_attach(struct pvr2_dvb_adapter *adap)
{
dvb_attach(simple_tuner_attach, adap->fe,
&adap->channel.hdw->i2c_adap, 0x61,
TUNER_PHILIPS_FCV1236D);
return 0;
}
static const struct pvr2_dvb_props pvr2_onair_usb2_fe_props = {
.frontend_attach = pvr2_lgdt3302_attach,
.tuner_attach = pvr2_fcv1236d_attach,
};
#endif
static const struct pvr2_device_client_desc pvr2_cli_onair_usb2[] = {
{ .module_id = PVR2_CLIENT_ID_SAA7115 },
{ .module_id = PVR2_CLIENT_ID_CS53L32A },
{ .module_id = PVR2_CLIENT_ID_TUNER },
};
static const struct pvr2_device_desc pvr2_device_onair_usb2 = {
.description = "OnAir USB2 Hybrid USB tuner",
.shortname = "oa2",
.client_table.lst = pvr2_cli_onair_usb2,
.client_table.cnt = ARRAY_SIZE(pvr2_cli_onair_usb2),
.default_tuner_type = TUNER_PHILIPS_FCV1236D,
.flag_has_analogtuner = !0,
.flag_has_composite = !0,
.flag_has_svideo = !0,
.flag_digital_requires_cx23416 = !0,
.signal_routing_scheme = PVR2_ROUTING_SCHEME_ONAIR,
.digital_control_scheme = PVR2_DIGITAL_SCHEME_ONAIR,
.default_std_mask = V4L2_STD_NTSC_M,
#ifdef CONFIG_VIDEO_PVRUSB2_DVB
.dvb_props = &pvr2_onair_usb2_fe_props,
#endif
};
/*------------------------------------------------------------------------*/
/* Hauppauge PVR-USB2 Model 73xxx */
#ifdef CONFIG_VIDEO_PVRUSB2_DVB
static struct tda10048_config hauppauge_tda10048_config = {
.demod_address = 0x10 >> 1,
.output_mode = TDA10048_PARALLEL_OUTPUT,
.fwbulkwritelen = TDA10048_BULKWRITE_50,
.inversion = TDA10048_INVERSION_ON,
.dtv6_if_freq_khz = TDA10048_IF_3300,
.dtv7_if_freq_khz = TDA10048_IF_3800,
.dtv8_if_freq_khz = TDA10048_IF_4300,
.clk_freq_khz = TDA10048_CLK_16000,
.disable_gate_access = 1,
};
static struct tda829x_config tda829x_no_probe = {
.probe_tuner = TDA829X_DONT_PROBE,
};
static struct tda18271_config hauppauge_tda18271_dvb_config = {
.gate = TDA18271_GATE_ANALOG,
.output_opt = TDA18271_OUTPUT_LT_OFF,
};
static int pvr2_tda10048_attach(struct pvr2_dvb_adapter *adap)
{
adap->fe = dvb_attach(tda10048_attach, &hauppauge_tda10048_config,
&adap->channel.hdw->i2c_adap);
if (adap->fe)
return 0;
return -EIO;
}
static int pvr2_73xxx_tda18271_8295_attach(struct pvr2_dvb_adapter *adap)
{
dvb_attach(tda829x_attach, adap->fe,
&adap->channel.hdw->i2c_adap, 0x42,
&tda829x_no_probe);
dvb_attach(tda18271_attach, adap->fe, 0x60,
&adap->channel.hdw->i2c_adap,
&hauppauge_tda18271_dvb_config);
return 0;
}
static const struct pvr2_dvb_props pvr2_73xxx_dvb_props = {
.frontend_attach = pvr2_tda10048_attach,
.tuner_attach = pvr2_73xxx_tda18271_8295_attach,
};
#endif
static const struct pvr2_device_client_desc pvr2_cli_73xxx[] = {
{ .module_id = PVR2_CLIENT_ID_CX25840 },
{ .module_id = PVR2_CLIENT_ID_TUNER,
.i2c_address_list = "\x42"},
};
static const char *pvr2_fw1_names_73xxx[] = {
"v4l-pvrusb2-73xxx-01.fw",
};
static const struct pvr2_device_desc pvr2_device_73xxx = {
.description = "WinTV HVR-1900 Model Category 73xxx",
.shortname = "73xxx",
.client_table.lst = pvr2_cli_73xxx,
.client_table.cnt = ARRAY_SIZE(pvr2_cli_73xxx),
.fx2_firmware.lst = pvr2_fw1_names_73xxx,
.fx2_firmware.cnt = ARRAY_SIZE(pvr2_fw1_names_73xxx),
.flag_has_cx25840 = !0,
.flag_has_hauppauge_rom = !0,
.flag_has_analogtuner = !0,
.flag_has_composite = !0,
.flag_has_svideo = !0,
.signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE,
.digital_control_scheme = PVR2_DIGITAL_SCHEME_HAUPPAUGE,
.led_scheme = PVR2_LED_SCHEME_HAUPPAUGE,
.ir_scheme = PVR2_IR_SCHEME_ZILOG,
#ifdef CONFIG_VIDEO_PVRUSB2_DVB
.dvb_props = &pvr2_73xxx_dvb_props,
#endif
};
/*------------------------------------------------------------------------*/
/* Hauppauge PVR-USB2 Model 75xxx */
#ifdef CONFIG_VIDEO_PVRUSB2_DVB
static struct s5h1409_config pvr2_s5h1409_config = {
.demod_address = 0x32 >> 1,
.output_mode = S5H1409_PARALLEL_OUTPUT,
.gpio = S5H1409_GPIO_OFF,
.qam_if = 4000,
.inversion = S5H1409_INVERSION_ON,
.status_mode = S5H1409_DEMODLOCKING,
};
static struct s5h1411_config pvr2_s5h1411_config = {
.output_mode = S5H1411_PARALLEL_OUTPUT,
.gpio = S5H1411_GPIO_OFF,
.vsb_if = S5H1411_IF_44000,
.qam_if = S5H1411_IF_4000,
.inversion = S5H1411_INVERSION_ON,
.status_mode = S5H1411_DEMODLOCKING,
};
static struct tda18271_std_map hauppauge_tda18271_std_map = {
.atsc_6 = { .if_freq = 5380, .agc_mode = 3, .std = 3,
.if_lvl = 6, .rfagc_top = 0x37, },
.qam_6 = { .if_freq = 4000, .agc_mode = 3, .std = 0,
.if_lvl = 6, .rfagc_top = 0x37, },
};
static struct tda18271_config hauppauge_tda18271_config = {
.std_map = &hauppauge_tda18271_std_map,
.gate = TDA18271_GATE_ANALOG,
.output_opt = TDA18271_OUTPUT_LT_OFF,
};
static int pvr2_s5h1409_attach(struct pvr2_dvb_adapter *adap)
{
adap->fe = dvb_attach(s5h1409_attach, &pvr2_s5h1409_config,
&adap->channel.hdw->i2c_adap);
if (adap->fe)
return 0;
return -EIO;
}
static int pvr2_s5h1411_attach(struct pvr2_dvb_adapter *adap)
{
adap->fe = dvb_attach(s5h1411_attach, &pvr2_s5h1411_config,
&adap->channel.hdw->i2c_adap);
if (adap->fe)
return 0;
return -EIO;
}
static int pvr2_tda18271_8295_attach(struct pvr2_dvb_adapter *adap)
{
dvb_attach(tda829x_attach, adap->fe,
&adap->channel.hdw->i2c_adap, 0x42,
&tda829x_no_probe);
dvb_attach(tda18271_attach, adap->fe, 0x60,
&adap->channel.hdw->i2c_adap,
&hauppauge_tda18271_config);
return 0;
}
static const struct pvr2_dvb_props pvr2_750xx_dvb_props = {
.frontend_attach = pvr2_s5h1409_attach,
.tuner_attach = pvr2_tda18271_8295_attach,
};
static const struct pvr2_dvb_props pvr2_751xx_dvb_props = {
.frontend_attach = pvr2_s5h1411_attach,
.tuner_attach = pvr2_tda18271_8295_attach,
};
#endif
static const char *pvr2_fw1_names_75xxx[] = {
"v4l-pvrusb2-73xxx-01.fw",
};
static const struct pvr2_device_desc pvr2_device_750xx = {
.description = "WinTV HVR-1950 Model Category 750xx",
.shortname = "750xx",
.client_table.lst = pvr2_cli_73xxx,
.client_table.cnt = ARRAY_SIZE(pvr2_cli_73xxx),
.fx2_firmware.lst = pvr2_fw1_names_75xxx,
.fx2_firmware.cnt = ARRAY_SIZE(pvr2_fw1_names_75xxx),
.flag_has_cx25840 = !0,
.flag_has_hauppauge_rom = !0,
.flag_has_analogtuner = !0,
.flag_has_composite = !0,
.flag_has_svideo = !0,
.signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE,
.digital_control_scheme = PVR2_DIGITAL_SCHEME_HAUPPAUGE,
.default_std_mask = V4L2_STD_NTSC_M,
.led_scheme = PVR2_LED_SCHEME_HAUPPAUGE,
.ir_scheme = PVR2_IR_SCHEME_ZILOG,
#ifdef CONFIG_VIDEO_PVRUSB2_DVB
.dvb_props = &pvr2_750xx_dvb_props,
#endif
};
static const struct pvr2_device_desc pvr2_device_751xx = {
.description = "WinTV HVR-1950 Model Category 751xx",
.shortname = "751xx",
.client_table.lst = pvr2_cli_73xxx,
.client_table.cnt = ARRAY_SIZE(pvr2_cli_73xxx),
.fx2_firmware.lst = pvr2_fw1_names_75xxx,
.fx2_firmware.cnt = ARRAY_SIZE(pvr2_fw1_names_75xxx),
.flag_has_cx25840 = !0,
.flag_has_hauppauge_rom = !0,
.flag_has_analogtuner = !0,
.flag_has_composite = !0,
.flag_has_svideo = !0,
.signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE,
.digital_control_scheme = PVR2_DIGITAL_SCHEME_HAUPPAUGE,
.default_std_mask = V4L2_STD_NTSC_M,
.led_scheme = PVR2_LED_SCHEME_HAUPPAUGE,
.ir_scheme = PVR2_IR_SCHEME_ZILOG,
#ifdef CONFIG_VIDEO_PVRUSB2_DVB
.dvb_props = &pvr2_751xx_dvb_props,
#endif
};
/*------------------------------------------------------------------------*/
struct usb_device_id pvr2_device_table[] = {
{ USB_DEVICE(0x2040, 0x2900),
.driver_info = (kernel_ulong_t)&pvr2_device_29xxx},
{ USB_DEVICE(0x2040, 0x2950), /* Logically identical to 2900 */
.driver_info = (kernel_ulong_t)&pvr2_device_29xxx},
{ USB_DEVICE(0x2040, 0x2400),
.driver_info = (kernel_ulong_t)&pvr2_device_24xxx},
{ USB_DEVICE(0x1164, 0x0622),
.driver_info = (kernel_ulong_t)&pvr2_device_gotview_2},
{ USB_DEVICE(0x1164, 0x0602),
.driver_info = (kernel_ulong_t)&pvr2_device_gotview_2d},
{ USB_DEVICE(0x11ba, 0x1003),
.driver_info = (kernel_ulong_t)&pvr2_device_onair_creator},
{ USB_DEVICE(0x11ba, 0x1001),
.driver_info = (kernel_ulong_t)&pvr2_device_onair_usb2},
{ USB_DEVICE(0x2040, 0x7300),
.driver_info = (kernel_ulong_t)&pvr2_device_73xxx},
{ USB_DEVICE(0x2040, 0x7500),
.driver_info = (kernel_ulong_t)&pvr2_device_750xx},
{ USB_DEVICE(0x2040, 0x7501),
.driver_info = (kernel_ulong_t)&pvr2_device_751xx},
{ }
};
MODULE_DEVICE_TABLE(usb, pvr2_device_table);
/*
Stuff for Emacs to see, in order to encourage consistent editing style:
*** Local Variables: ***
*** mode: c ***
*** fill-column: 75 ***
*** tab-width: 8 ***
*** c-basic-offset: 8 ***
*** End: ***
*/
View Git Blame Copy Permalink