kevin/linux
1
Fork 0
Code
a15dbeb477
linux/drivers/scsi/sata_via.c
Alan Cox 47a8659380 libata: bitmask based pci init functions for one or two ports 
This redoes the n_ports logic I proposed before as a bitmask.
ata_pci_init_native_mode is now used with a mask allowing for mixed mode
stuff later on. ata_pci_init_legacy_port is called with port number and
does one port now not two. Instead it is called twice by the ata init
logic which cleans both of them up.

There are stil limits in the original code left over

- IRQ/port mapping for legacy mode should be arch specific values
- You can have one legacy mode IDE adapter per PCI root bridge on some systems
- Doesn't handle mixed mode devices yet (but is now a lot closer to it)
2005-10-04 08:09:19 -04:00

393 lines
10 KiB
C
Raw Blame History

/*
* sata_via.c - VIA Serial ATA controllers
*
* Maintained by: Jeff Garzik <jgarzik@pobox.com>
* Please ALWAYS copy linux-ide@vger.kernel.org
on emails.
*
* Copyright 2003-2004 Red Hat, Inc. All rights reserved.
* Copyright 2003-2004 Jeff Garzik
*
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; see the file COPYING. If not, write to
* the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
*
*
* libata documentation is available via 'make {ps|pdf}docs',
* as Documentation/DocBook/libata.*
*
* Hardware documentation available under NDA.
*
*
* To-do list:
* - VT6421 PATA support
*
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include "scsi.h"
#include <scsi/scsi_host.h>
#include <linux/libata.h>
#include <asm/io.h>
#define DRV_NAME "sata_via"
#define DRV_VERSION "1.1"
enum board_ids_enum {
vt6420,
vt6421,
};
enum {
SATA_CHAN_ENAB = 0x40, /* SATA channel enable */
SATA_INT_GATE = 0x41, /* SATA interrupt gating */
SATA_NATIVE_MODE = 0x42, /* Native mode enable */
SATA_PATA_SHARING = 0x49, /* PATA/SATA sharing func ctrl */
PORT0 = (1 << 1),
PORT1 = (1 << 0),
ALL_PORTS = PORT0 | PORT1,
N_PORTS = 2,
NATIVE_MODE_ALL = (1 << 7) | (1 << 6) | (1 << 5) | (1 << 4),
SATA_EXT_PHY = (1 << 6), /* 0==use PATA, 1==ext phy */
SATA_2DEV = (1 << 5), /* SATA is master/slave */
};
static int svia_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
static u32 svia_scr_read (struct ata_port *ap, unsigned int sc_reg);
static void svia_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
static struct pci_device_id svia_pci_tbl[] = {
{ 0x1106, 0x3149, PCI_ANY_ID, PCI_ANY_ID, 0, 0, vt6420 },
{ 0x1106, 0x3249, PCI_ANY_ID, PCI_ANY_ID, 0, 0, vt6421 },
{ } /* terminate list */
};
static struct pci_driver svia_pci_driver = {
.name = DRV_NAME,
.id_table = svia_pci_tbl,
.probe = svia_init_one,
.remove = ata_pci_remove_one,
};
static Scsi_Host_Template svia_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.eh_strategy_handler = ata_scsi_error,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
.max_sectors = ATA_MAX_SECTORS,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.bios_param = ata_std_bios_param,
.ordered_flush = 1,
};
static struct ata_port_operations svia_sata_ops = {
.port_disable = ata_port_disable,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.phy_reset = sata_phy_reset,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.eng_timeout = ata_eng_timeout,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.scr_read = svia_scr_read,
.scr_write = svia_scr_write,
.port_start = ata_port_start,
.port_stop = ata_port_stop,
.host_stop = ata_host_stop,
};
static struct ata_port_info svia_port_info = {
.sht = &svia_sht,
.host_flags = ATA_FLAG_SATA | ATA_FLAG_SRST | ATA_FLAG_NO_LEGACY,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
.udma_mask = 0x7f,
.port_ops = &svia_sata_ops,
};
MODULE_AUTHOR("Jeff Garzik");
MODULE_DESCRIPTION("SCSI low-level driver for VIA SATA controllers");
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, svia_pci_tbl);
MODULE_VERSION(DRV_VERSION);
static u32 svia_scr_read (struct ata_port *ap, unsigned int sc_reg)
{
if (sc_reg > SCR_CONTROL)
return 0xffffffffU;
return inl(ap->ioaddr.scr_addr + (4 * sc_reg));
}
static void svia_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val)
{
if (sc_reg > SCR_CONTROL)
return;
outl(val, ap->ioaddr.scr_addr + (4 * sc_reg));
}
static const unsigned int svia_bar_sizes[] = {
8, 4, 8, 4, 16, 256
};
static const unsigned int vt6421_bar_sizes[] = {
16, 16, 16, 16, 32, 128
};
static unsigned long svia_scr_addr(unsigned long addr, unsigned int port)
{
return addr + (port * 128);
}
static unsigned long vt6421_scr_addr(unsigned long addr, unsigned int port)
{
return addr + (port * 64);
}
static void vt6421_init_addrs(struct ata_probe_ent *probe_ent,
struct pci_dev *pdev,
unsigned int port)
{
unsigned long reg_addr = pci_resource_start(pdev, port);
unsigned long bmdma_addr = pci_resource_start(pdev, 4) + (port * 8);
unsigned long scr_addr;
probe_ent->port[port].cmd_addr = reg_addr;
probe_ent->port[port].altstatus_addr =
probe_ent->port[port].ctl_addr = (reg_addr + 8) | ATA_PCI_CTL_OFS;
probe_ent->port[port].bmdma_addr = bmdma_addr;
scr_addr = vt6421_scr_addr(pci_resource_start(pdev, 5), port);
probe_ent->port[port].scr_addr = scr_addr;
ata_std_ports(&probe_ent->port[port]);
}
static struct ata_probe_ent *vt6420_init_probe_ent(struct pci_dev *pdev)
{
struct ata_probe_ent *probe_ent;
struct ata_port_info *ppi = &svia_port_info;
probe_ent = ata_pci_init_native_mode(pdev, &ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
if (!probe_ent)
return NULL;
probe_ent->port[0].scr_addr =
svia_scr_addr(pci_resource_start(pdev, 5), 0);
probe_ent->port[1].scr_addr =
svia_scr_addr(pci_resource_start(pdev, 5), 1);
return probe_ent;
}
static struct ata_probe_ent *vt6421_init_probe_ent(struct pci_dev *pdev)
{
struct ata_probe_ent *probe_ent;
unsigned int i;
probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL);
if (!probe_ent)
return NULL;
memset(probe_ent, 0, sizeof(*probe_ent));
probe_ent->dev = pci_dev_to_dev(pdev);
INIT_LIST_HEAD(&probe_ent->node);
probe_ent->sht = &svia_sht;
probe_ent->host_flags = ATA_FLAG_SATA | ATA_FLAG_SATA_RESET |
ATA_FLAG_NO_LEGACY;
probe_ent->port_ops = &svia_sata_ops;
probe_ent->n_ports = N_PORTS;
probe_ent->irq = pdev->irq;
probe_ent->irq_flags = SA_SHIRQ;
probe_ent->pio_mask = 0x1f;
probe_ent->mwdma_mask = 0x07;
probe_ent->udma_mask = 0x7f;
for (i = 0; i < N_PORTS; i++)
vt6421_init_addrs(probe_ent, pdev, i);
return probe_ent;
}
static void svia_configure(struct pci_dev *pdev)
{
u8 tmp8;
pci_read_config_byte(pdev, PCI_INTERRUPT_LINE, &tmp8);
printk(KERN_INFO DRV_NAME "(%s): routed to hard irq line %d\n",
pci_name(pdev),
(int) (tmp8 & 0xf0) == 0xf0 ? 0 : tmp8 & 0x0f);
/* make sure SATA channels are enabled */
pci_read_config_byte(pdev, SATA_CHAN_ENAB, &tmp8);
if ((tmp8 & ALL_PORTS) != ALL_PORTS) {
printk(KERN_DEBUG DRV_NAME "(%s): enabling SATA channels (0x%x)\n",
pci_name(pdev), (int) tmp8);
tmp8 |= ALL_PORTS;
pci_write_config_byte(pdev, SATA_CHAN_ENAB, tmp8);
}
/* make sure interrupts for each channel sent to us */
pci_read_config_byte(pdev, SATA_INT_GATE, &tmp8);
if ((tmp8 & ALL_PORTS) != ALL_PORTS) {
printk(KERN_DEBUG DRV_NAME "(%s): enabling SATA channel interrupts (0x%x)\n",
pci_name(pdev), (int) tmp8);
tmp8 |= ALL_PORTS;
pci_write_config_byte(pdev, SATA_INT_GATE, tmp8);
}
/* make sure native mode is enabled */
pci_read_config_byte(pdev, SATA_NATIVE_MODE, &tmp8);
if ((tmp8 & NATIVE_MODE_ALL) != NATIVE_MODE_ALL) {
printk(KERN_DEBUG DRV_NAME "(%s): enabling SATA channel native mode (0x%x)\n",
pci_name(pdev), (int) tmp8);
tmp8 |= NATIVE_MODE_ALL;
pci_write_config_byte(pdev, SATA_NATIVE_MODE, tmp8);
}
}
static int svia_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int printed_version;
unsigned int i;
int rc;
struct ata_probe_ent *probe_ent;
int board_id = (int) ent->driver_data;
const int *bar_sizes;
int pci_dev_busy = 0;
u8 tmp8;
if (!printed_version++)
printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
rc = pci_enable_device(pdev);
if (rc)
return rc;
rc = pci_request_regions(pdev, DRV_NAME);
if (rc) {
pci_dev_busy = 1;
goto err_out;
}
if (board_id == vt6420) {
pci_read_config_byte(pdev, SATA_PATA_SHARING, &tmp8);
if (tmp8 & SATA_2DEV) {
printk(KERN_ERR DRV_NAME "(%s): SATA master/slave not supported (0x%x)\n",
pci_name(pdev), (int) tmp8);
rc = -EIO;
goto err_out_regions;
}
bar_sizes = &svia_bar_sizes[0];
} else {
bar_sizes = &vt6421_bar_sizes[0];
}
for (i = 0; i < ARRAY_SIZE(svia_bar_sizes); i++)
if ((pci_resource_start(pdev, i) == 0) ||
(pci_resource_len(pdev, i) < bar_sizes[i])) {
printk(KERN_ERR DRV_NAME "(%s): invalid PCI BAR %u (sz 0x%lx, val 0x%lx)\n",
pci_name(pdev), i,
pci_resource_start(pdev, i),
pci_resource_len(pdev, i));
rc = -ENODEV;
goto err_out_regions;
}
rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
if (rc)
goto err_out_regions;
rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
if (rc)
goto err_out_regions;
if (board_id == vt6420)
probe_ent = vt6420_init_probe_ent(pdev);
else
probe_ent = vt6421_init_probe_ent(pdev);
if (!probe_ent) {
printk(KERN_ERR DRV_NAME "(%s): out of memory\n",
pci_name(pdev));
rc = -ENOMEM;
goto err_out_regions;
}
svia_configure(pdev);
pci_set_master(pdev);
/* FIXME: check ata_device_add return value */
ata_device_add(probe_ent);
kfree(probe_ent);
return 0;
err_out_regions:
pci_release_regions(pdev);
err_out:
if (!pci_dev_busy)
pci_disable_device(pdev);
return rc;
}
static int __init svia_init(void)
{
return pci_module_init(&svia_pci_driver);
}
static void __exit svia_exit(void)
{
pci_unregister_driver(&svia_pci_driver);
}
module_init(svia_init);
module_exit(svia_exit);
View Git Blame Copy Permalink