kevin/linux
1
Fork 0
Code
a15dbeb477
linux/drivers/scsi/Makefile
Christoph Hellwig c7ebbbce36 [SCSI] SAS transport class 
The SAS transport class contains common code to deal with SAS HBAs, an
aproximated representation of SAS topologies in the driver model,
and various sysfs attributes to expose these topologies and managment
interfaces to userspace.

In addition to the basic SCSI core objects this transport class introduces
two additional intermediate objects:  The SAS PHY as represented by struct
sas_phy defines an "outgoing" PHY on a SAS HBA or Expander, and the SAS
remote PHY represented by struct sas_rphy defines an "incoming" PHY on a
SAS Expander or end device.  Note that this is purely a software concept, the
underlying hardware for a PHY and a remote PHY is the exactly the same.

There is no concept of a SAS port in this code, users can see what PHYs
form a wide port based on the port_identifier attribute, which is the same
for all PHYs in a port.

This submission doesn't handle hot-plug addition or removal of SAS devices
and thus doesn't do scanning in a workqueue yet, that will be added in
phase2 after this submission.  In a third phase I will add additional
managment infrastructure.

I think this submission is ready for 2.6.14, but additional comments are
of course very welcome.

I'd like to thanks James Smart a lot for his very useful input on the
design.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-09 16:43:37 -05:00

189 lines
7.3 KiB
Makefile
Raw Blame History

#
# Makefile for linux/drivers/scsi
#
# 30 May 2000, Christoph Hellwig <hch@infradead.org>
# Rewritten to use lists instead of if-statements.
#
# 20 Sep 2000, Torben Mathiasen <tmm@image.dk>
# Changed link order to reflect new scsi initialization.
#
# *!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!
# The link order must be, SCSI Core, SCSI HBA drivers, and
# lastly SCSI peripheral drivers (disk/tape/cdrom/etc.) to
# satisfy certain initialization assumptions in the SCSI layer.
# *!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!
CFLAGS_aha152x.o = -DAHA152X_STAT -DAUTOCONF
CFLAGS_gdth.o = # -DDEBUG_GDTH=2 -D__SERIAL__ -D__COM2__ -DGDTH_STATISTICS
CFLAGS_seagate.o = -DARBITRATE -DPARITY -DSEAGATE_USE_ASM
subdir-$(CONFIG_PCMCIA) += pcmcia
obj-$(CONFIG_SCSI) += scsi_mod.o
obj-$(CONFIG_RAID_ATTRS) += raid_class.o
# --- NOTE ORDERING HERE ---
# For kernel non-modular link, transport attributes need to
# be initialised before drivers
# --------------------------
obj-$(CONFIG_SCSI_SPI_ATTRS) += scsi_transport_spi.o
obj-$(CONFIG_SCSI_FC_ATTRS) += scsi_transport_fc.o
obj-$(CONFIG_SCSI_ISCSI_ATTRS) += scsi_transport_iscsi.o
obj-$(CONFIG_SCSI_SAS_ATTRS) += scsi_transport_sas.o
obj-$(CONFIG_SCSI_AMIGA7XX) += amiga7xx.o 53c7xx.o
obj-$(CONFIG_A3000_SCSI) += a3000.o wd33c93.o
obj-$(CONFIG_A2091_SCSI) += a2091.o wd33c93.o
obj-$(CONFIG_GVP11_SCSI) += gvp11.o wd33c93.o
obj-$(CONFIG_MVME147_SCSI) += mvme147.o wd33c93.o
obj-$(CONFIG_SGIWD93_SCSI) += sgiwd93.o wd33c93.o
obj-$(CONFIG_CYBERSTORM_SCSI) += NCR53C9x.o cyberstorm.o
obj-$(CONFIG_CYBERSTORMII_SCSI) += NCR53C9x.o cyberstormII.o
obj-$(CONFIG_BLZ2060_SCSI) += NCR53C9x.o blz2060.o
obj-$(CONFIG_BLZ1230_SCSI) += NCR53C9x.o blz1230.o
obj-$(CONFIG_FASTLANE_SCSI) += NCR53C9x.o fastlane.o
obj-$(CONFIG_OKTAGON_SCSI) += NCR53C9x.o oktagon_esp.o oktagon_io.o
obj-$(CONFIG_ATARI_SCSI) += atari_scsi.o
obj-$(CONFIG_MAC_SCSI) += mac_scsi.o
obj-$(CONFIG_SCSI_MAC_ESP) += mac_esp.o NCR53C9x.o
obj-$(CONFIG_SUN3_SCSI) += sun3_scsi.o sun3_scsi_vme.o
obj-$(CONFIG_MVME16x_SCSI) += mvme16x.o 53c7xx.o
obj-$(CONFIG_BVME6000_SCSI) += bvme6000.o 53c7xx.o
obj-$(CONFIG_SCSI_SIM710) += 53c700.o sim710.o
obj-$(CONFIG_SCSI_ADVANSYS) += advansys.o
obj-$(CONFIG_SCSI_PSI240I) += psi240i.o
obj-$(CONFIG_SCSI_BUSLOGIC) += BusLogic.o
obj-$(CONFIG_SCSI_DPT_I2O) += dpt_i2o.o
obj-$(CONFIG_SCSI_U14_34F) += u14-34f.o
obj-$(CONFIG_SCSI_ULTRASTOR) += ultrastor.o
obj-$(CONFIG_SCSI_AHA152X) += aha152x.o
obj-$(CONFIG_SCSI_AHA1542) += aha1542.o
obj-$(CONFIG_SCSI_AHA1740) += aha1740.o
obj-$(CONFIG_SCSI_AIC7XXX) += aic7xxx/
obj-$(CONFIG_SCSI_AIC79XX) += aic7xxx/
obj-$(CONFIG_SCSI_AACRAID) += aacraid/
obj-$(CONFIG_SCSI_AIC7XXX_OLD) += aic7xxx_old.o
obj-$(CONFIG_SCSI_IPS) += ips.o
obj-$(CONFIG_SCSI_FD_MCS) += fd_mcs.o
obj-$(CONFIG_SCSI_FUTURE_DOMAIN)+= fdomain.o
obj-$(CONFIG_SCSI_IN2000) += in2000.o
obj-$(CONFIG_SCSI_GENERIC_NCR5380) += g_NCR5380.o
obj-$(CONFIG_SCSI_GENERIC_NCR5380_MMIO) += g_NCR5380_mmio.o
obj-$(CONFIG_SCSI_NCR53C406A) += NCR53c406a.o
obj-$(CONFIG_SCSI_NCR_D700) += 53c700.o NCR_D700.o
obj-$(CONFIG_SCSI_NCR_Q720) += NCR_Q720_mod.o
obj-$(CONFIG_SCSI_SYM53C416) += sym53c416.o
obj-$(CONFIG_SCSI_QLOGIC_FAS) += qlogicfas408.o qlogicfas.o
obj-$(CONFIG_PCMCIA_QLOGIC) += qlogicfas408.o
obj-$(CONFIG_SCSI_QLOGIC_ISP) += qlogicisp.o
obj-$(CONFIG_SCSI_QLOGIC_FC) += qlogicfc.o
obj-$(CONFIG_SCSI_QLOGIC_1280) += qla1280.o
obj-$(CONFIG_SCSI_QLA2XXX) += qla2xxx/
obj-$(CONFIG_SCSI_LPFC) += lpfc/
obj-$(CONFIG_SCSI_PAS16) += pas16.o
obj-$(CONFIG_SCSI_SEAGATE) += seagate.o
obj-$(CONFIG_SCSI_FD_8xx) += seagate.o
obj-$(CONFIG_SCSI_T128) += t128.o
obj-$(CONFIG_SCSI_DMX3191D) += dmx3191d.o
obj-$(CONFIG_SCSI_DTC3280) += dtc.o
obj-$(CONFIG_SCSI_SYM53C8XX_2) += sym53c8xx_2/
obj-$(CONFIG_SCSI_ZALON) += zalon7xx.o
obj-$(CONFIG_SCSI_EATA_PIO) += eata_pio.o
obj-$(CONFIG_SCSI_7000FASST) += wd7000.o
obj-$(CONFIG_SCSI_MCA_53C9X) += NCR53C9x.o mca_53c9x.o
obj-$(CONFIG_SCSI_IBMMCA) += ibmmca.o
obj-$(CONFIG_SCSI_EATA) += eata.o
obj-$(CONFIG_SCSI_DC395x) += dc395x.o
obj-$(CONFIG_SCSI_DC390T) += tmscsim.o
obj-$(CONFIG_MEGARAID_LEGACY) += megaraid.o
obj-$(CONFIG_MEGARAID_NEWGEN) += megaraid/
obj-$(CONFIG_SCSI_ACARD) += atp870u.o
obj-$(CONFIG_SCSI_SUNESP) += esp.o
obj-$(CONFIG_SCSI_GDTH) += gdth.o
obj-$(CONFIG_SCSI_INITIO) += initio.o
obj-$(CONFIG_SCSI_INIA100) += a100u2w.o
obj-$(CONFIG_SCSI_QLOGICPTI) += qlogicpti.o
obj-$(CONFIG_BLK_DEV_IDESCSI) += ide-scsi.o
obj-$(CONFIG_SCSI_MESH) += mesh.o
obj-$(CONFIG_SCSI_MAC53C94) += mac53c94.o
obj-$(CONFIG_SCSI_PLUTO) += pluto.o
obj-$(CONFIG_SCSI_DECNCR) += NCR53C9x.o dec_esp.o
obj-$(CONFIG_BLK_DEV_3W_XXXX_RAID) += 3w-xxxx.o
obj-$(CONFIG_SCSI_3W_9XXX) += 3w-9xxx.o
obj-$(CONFIG_SCSI_PPA) += ppa.o
obj-$(CONFIG_SCSI_IMM) += imm.o
obj-$(CONFIG_JAZZ_ESP) += NCR53C9x.o jazz_esp.o
obj-$(CONFIG_SUN3X_ESP) += NCR53C9x.o sun3x_esp.o
obj-$(CONFIG_SCSI_DEBUG) += scsi_debug.o
obj-$(CONFIG_SCSI_FCAL) += fcal.o
obj-$(CONFIG_SCSI_CPQFCTS) += cpqfc.o
obj-$(CONFIG_SCSI_LASI700) += 53c700.o lasi700.o
obj-$(CONFIG_SCSI_NSP32) += nsp32.o
obj-$(CONFIG_SCSI_IPR) += ipr.o
obj-$(CONFIG_SCSI_IBMVSCSI) += ibmvscsi/
obj-$(CONFIG_SCSI_SATA_AHCI) += libata.o ahci.o
obj-$(CONFIG_SCSI_SATA_SVW) += libata.o sata_svw.o
obj-$(CONFIG_SCSI_ATA_PIIX) += libata.o ata_piix.o
obj-$(CONFIG_SCSI_SATA_PROMISE) += libata.o sata_promise.o
obj-$(CONFIG_SCSI_SATA_QSTOR) += libata.o sata_qstor.o
obj-$(CONFIG_SCSI_SATA_SIL) += libata.o sata_sil.o
obj-$(CONFIG_SCSI_SATA_VIA) += libata.o sata_via.o
obj-$(CONFIG_SCSI_SATA_VITESSE) += libata.o sata_vsc.o
obj-$(CONFIG_SCSI_SATA_SIS) += libata.o sata_sis.o
obj-$(CONFIG_SCSI_SATA_SX4) += libata.o sata_sx4.o
obj-$(CONFIG_SCSI_SATA_NV) += libata.o sata_nv.o
obj-$(CONFIG_SCSI_SATA_ULI) += libata.o sata_uli.o
obj-$(CONFIG_SCSI_SATA_MV) += libata.o sata_mv.o
obj-$(CONFIG_ARM) += arm/
obj-$(CONFIG_CHR_DEV_ST) += st.o
obj-$(CONFIG_CHR_DEV_OSST) += osst.o
obj-$(CONFIG_BLK_DEV_SD) += sd_mod.o
obj-$(CONFIG_BLK_DEV_SR) += sr_mod.o
obj-$(CONFIG_CHR_DEV_SG) += sg.o
obj-$(CONFIG_CHR_DEV_SCH) += ch.o
scsi_mod-y += scsi.o hosts.o scsi_ioctl.o constants.o \
scsicam.o scsi_error.o scsi_lib.o \
scsi_scan.o scsi_sysfs.o \
scsi_devinfo.o
scsi_mod-$(CONFIG_SYSCTL) += scsi_sysctl.o
scsi_mod-$(CONFIG_SCSI_PROC_FS) += scsi_proc.o
sd_mod-objs := sd.o
sr_mod-objs := sr.o sr_ioctl.o sr_vendor.o
ncr53c8xx-flags-$(CONFIG_SCSI_ZALON) \
:= -DCONFIG_NCR53C8XX_PREFETCH -DSCSI_NCR_BIG_ENDIAN \
-DCONFIG_SCSI_NCR53C8XX_NO_WORD_TRANSFERS
CFLAGS_ncr53c8xx.o := $(ncr53c8xx-flags-y) $(ncr53c8xx-flags-m)
zalon7xx-objs := zalon.o ncr53c8xx.o
NCR_Q720_mod-objs := NCR_Q720.o ncr53c8xx.o
cpqfc-objs := cpqfcTSinit.o cpqfcTScontrol.o cpqfcTSi2c.o \
cpqfcTSworker.o cpqfcTStrigger.o
libata-objs := libata-core.o libata-scsi.o
# Files generated that shall be removed upon make clean
clean-files := 53c7xx_d.h 53c700_d.h \
53c7xx_u.h 53c700_u.h
$(obj)/53c7xx.o: $(obj)/53c7xx_d.h $(obj)/53c7xx_u.h
$(obj)/53c700.o $(MODVERDIR)/$(obj)/53c700.ver: $(obj)/53c700_d.h
# If you want to play with the firmware, uncomment
# GENERATE_FIRMWARE := 1
ifdef GENERATE_FIRMWARE
$(obj)/53c7xx_d.h: $(src)/53c7xx.scr $(src)/script_asm.pl
$(CPP) -traditional -DCHIP=710 - < $< | grep -v '^#' | $(PERL) -s $(src)/script_asm.pl -ncr7x0_family $@ $(@:_d.h=_u.h)
$(obj)/53c7xx_u.h: $(obj)/53c7xx_d.h
$(obj)/53c700_d.h: $(src)/53c700.scr $(src)/script_asm.pl
$(PERL) -s $(src)/script_asm.pl -ncr7x0_family $@ $(@:_d.h=_u.h) < $<
endif
View Git Blame Copy Permalink