1
linux/drivers/usb
Alan Stern a0bb108112 USB: usb-storage: add BAD_SENSE flag
This patch (as1311) fixes a problem in usb-storage: Some devices are
pretty broken when it comes to reporting sense data.  The information
they send back indicates that they have more than 18 bytes of sense
data available, but when the system asks for more than 18 they fail or
hang.  The symptom is that probing fails with multiple resets.

The patch adds a new BAD_SENSE flag to indicate that usb-storage
should never ask for more than 18 bytes of sense data.  The flag can
be set in an unusual_devs entry or via the "quirks=" module parameter,
and it is set automatically whenever a REQUEST SENSE command for more
than 18 bytes fails or times out.

An unusual_devs entry is added for the Agfa photo frame, which uses a
Prolific chip having this bug.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Daniel Kukula <daniel.kuku@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11 11:55:26 -08:00
..
atm tree-wide: fix assorted typos all over the place 2009-12-04 15:39:55 +01:00
c67x00
class USB: usbtmc: repeat usb_bulk_msg until whole message is transfered 2009-12-11 11:55:25 -08:00
core USB: prepare for changover to Runtime PM framework 2009-12-11 11:55:25 -08:00
early USB: ehci-dbgp: errata for EHCI debug/host controller synchronization 2009-09-23 06:46:38 -07:00
gadget USB: g_multi: Multifunction Composite Gadget added 2009-12-11 11:55:23 -08:00
host USB: xhci: Handle errors that cause endpoint halts. 2009-12-11 11:55:23 -08:00
image USB: remove unneeded printks from microtek driver 2009-09-23 06:46:34 -07:00
misc usbtest: make module param pattern writeable 2009-12-11 11:55:22 -08:00
mon USB: add scatter-gather support to usbmon 2009-12-11 11:55:20 -08:00
musb USB: musb_gadget: remove pointless loop 2009-12-11 11:55:25 -08:00
otg USB: twl4030: Enable USB regulators before enabling USB charging 2009-12-11 11:55:25 -08:00
serial USB: remove the auto_pm flag 2009-12-11 11:55:21 -08:00
storage USB: usb-storage: add BAD_SENSE flag 2009-12-11 11:55:26 -08:00
wusbcore USB: wusb: add wusb_phy_rate sysfs file to host controllers 2009-12-11 11:55:16 -08:00
Kconfig USB: ehci: Allow EHCI to be built on OMAP3 2009-12-11 11:55:20 -08:00
Makefile USB OTG: Add generic driver for ULPI OTG transceiver 2009-12-11 11:55:16 -08:00
README
usb-skeleton.c USB: skeleton: Correct use of ! and & 2009-12-11 11:55:14 -08:00

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.