kevin/linux
1
Fork 0
Code
9f9c907fdc
linux/drivers/media/video/saa7134/saa7134-input.c
Rudo Thomas a8029170b9 V4L/DVB (3369): LifeView FlyDVB-T Duo: add support for remote control 
The remote controller on the LifeView FlyDVB-T Duo card work flawlessly
with the same settings as the LifeView FlyDVB-T LR301 card.

Signed-off-by: Rudo Thomas <rudo@matfyz.cz>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-02-27 00:08:46 -03:00

338 lines
8.9 KiB
C
Raw Blame History

/*
*
* handle saa7134 IR remotes via linux kernel input layer.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/input.h>
#include "saa7134-reg.h"
#include "saa7134.h"
static unsigned int disable_ir = 0;
module_param(disable_ir, int, 0444);
MODULE_PARM_DESC(disable_ir,"disable infrared remote support");
static unsigned int ir_debug = 0;
module_param(ir_debug, int, 0644);
MODULE_PARM_DESC(ir_debug,"enable debug messages [IR]");
#define dprintk(fmt, arg...) if (ir_debug) \
printk(KERN_DEBUG "%s/ir: " fmt, dev->name , ## arg)
#define i2cdprintk(fmt, arg...) if (ir_debug) \
printk(KERN_DEBUG "%s/ir: " fmt, ir->c.name , ## arg)
/* -------------------- GPIO generic keycode builder -------------------- */
static int build_key(struct saa7134_dev *dev)
{
struct saa7134_ir *ir = dev->remote;
u32 gpio, data;
/* rising SAA7134_GPIO_GPRESCAN reads the status */
saa_clearb(SAA7134_GPIO_GPMODE3,SAA7134_GPIO_GPRESCAN);
saa_setb(SAA7134_GPIO_GPMODE3,SAA7134_GPIO_GPRESCAN);
gpio = saa_readl(SAA7134_GPIO_GPSTATUS0 >> 2);
if (ir->polling) {
if (ir->last_gpio == gpio)
return 0;
ir->last_gpio = gpio;
}
data = ir_extract_bits(gpio, ir->mask_keycode);
dprintk("build_key gpio=0x%x mask=0x%x data=%d\n",
gpio, ir->mask_keycode, data);
if (ir->polling) {
if ((ir->mask_keydown && (0 != (gpio & ir->mask_keydown))) ||
(ir->mask_keyup && (0 == (gpio & ir->mask_keyup)))) {
ir_input_keydown(ir->dev, &ir->ir, data, data);
} else {
ir_input_nokey(ir->dev, &ir->ir);
}
}
else { /* IRQ driven mode - handle key press and release in one go */
if ((ir->mask_keydown && (0 != (gpio & ir->mask_keydown))) ||
(ir->mask_keyup && (0 == (gpio & ir->mask_keyup)))) {
ir_input_keydown(ir->dev, &ir->ir, data, data);
ir_input_nokey(ir->dev, &ir->ir);
}
}
return 0;
}
/* --------------------- Chip specific I2C key builders ----------------- */
static int get_key_purpletv(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
{
unsigned char b;
/* poll IR chip */
if (1 != i2c_master_recv(&ir->c,&b,1)) {
i2cdprintk("read error\n");
return -EIO;
}
/* no button press */
if (b==0)
return 0;
/* repeating */
if (b & 0x80)
return 1;
*ir_key = b;
*ir_raw = b;
return 1;
}
void saa7134_input_irq(struct saa7134_dev *dev)
{
struct saa7134_ir *ir = dev->remote;
if (!ir->polling)
build_key(dev);
}
static void saa7134_input_timer(unsigned long data)
{
struct saa7134_dev *dev = (struct saa7134_dev*)data;
struct saa7134_ir *ir = dev->remote;
unsigned long timeout;
build_key(dev);
timeout = jiffies + (ir->polling * HZ / 1000);
mod_timer(&ir->timer, timeout);
}
int saa7134_input_init1(struct saa7134_dev *dev)
{
struct saa7134_ir *ir;
struct input_dev *input_dev;
IR_KEYTAB_TYPE *ir_codes = NULL;
u32 mask_keycode = 0;
u32 mask_keydown = 0;
u32 mask_keyup = 0;
int polling = 0;
int ir_type = IR_TYPE_OTHER;
if (dev->has_remote != SAA7134_REMOTE_GPIO)
return -ENODEV;
if (disable_ir)
return -ENODEV;
/* detect & configure */
switch (dev->board) {
case SAA7134_BOARD_FLYVIDEO2000:
case SAA7134_BOARD_FLYVIDEO3000:
case SAA7134_BOARD_FLYTVPLATINUM_FM:
case SAA7134_BOARD_FLYTVPLATINUM_MINI2:
ir_codes = ir_codes_flyvideo;
mask_keycode = 0xEC00000;
mask_keydown = 0x0040000;
break;
case SAA7134_BOARD_CINERGY400:
case SAA7134_BOARD_CINERGY600:
case SAA7134_BOARD_CINERGY600_MK3:
ir_codes = ir_codes_cinergy;
mask_keycode = 0x00003f;
mask_keyup = 0x040000;
break;
case SAA7134_BOARD_ECS_TVP3XP:
case SAA7134_BOARD_ECS_TVP3XP_4CB5:
ir_codes = ir_codes_eztv;
mask_keycode = 0x00017c;
mask_keyup = 0x000002;
polling = 50; // ms
break;
case SAA7134_BOARD_KWORLD_XPERT:
case SAA7134_BOARD_AVACSSMARTTV:
ir_codes = ir_codes_pixelview;
mask_keycode = 0x00001F;
mask_keyup = 0x000020;
polling = 50; // ms
break;
case SAA7134_BOARD_MD2819:
case SAA7134_BOARD_KWORLD_VSTREAM_XPERT:
case SAA7134_BOARD_AVERMEDIA_305:
case SAA7134_BOARD_AVERMEDIA_307:
case SAA7134_BOARD_AVERMEDIA_STUDIO_305:
case SAA7134_BOARD_AVERMEDIA_STUDIO_307:
case SAA7134_BOARD_AVERMEDIA_GO_007_FM:
ir_codes = ir_codes_avermedia;
mask_keycode = 0x0007C8;
mask_keydown = 0x000010;
polling = 50; // ms
/* Set GPIO pin2 to high to enable the IR controller */
saa_setb(SAA7134_GPIO_GPMODE0, 0x4);
saa_setb(SAA7134_GPIO_GPSTATUS0, 0x4);
break;
case SAA7134_BOARD_KWORLD_TERMINATOR:
ir_codes = ir_codes_pixelview;
mask_keycode = 0x00001f;
mask_keyup = 0x000060;
polling = 50; // ms
break;
case SAA7134_BOARD_MANLI_MTV001:
case SAA7134_BOARD_MANLI_MTV002:
case SAA7134_BOARD_BEHOLD_409FM:
ir_codes = ir_codes_manli;
mask_keycode = 0x001f00;
mask_keyup = 0x004000;
polling = 50; // ms
break;
case SAA7134_BOARD_SEDNA_PC_TV_CARDBUS:
ir_codes = ir_codes_pctv_sedna;
mask_keycode = 0x001f00;
mask_keyup = 0x004000;
polling = 50; // ms
break;
case SAA7134_BOARD_GOTVIEW_7135:
ir_codes = ir_codes_gotview7135;
mask_keycode = 0x0003EC;
mask_keyup = 0x008000;
mask_keydown = 0x000010;
polling = 50; // ms
break;
case SAA7134_BOARD_VIDEOMATE_TV_PVR:
case SAA7134_BOARD_VIDEOMATE_GOLD_PLUS:
case SAA7134_BOARD_VIDEOMATE_TV_GOLD_PLUSII:
ir_codes = ir_codes_videomate_tv_pvr;
mask_keycode = 0x00003F;
mask_keyup = 0x400000;
polling = 50; // ms
break;
case SAA7134_BOARD_VIDEOMATE_DVBT_300:
case SAA7134_BOARD_VIDEOMATE_DVBT_200:
ir_codes = ir_codes_videomate_tv_pvr;
mask_keycode = 0x003F00;
mask_keyup = 0x040000;
break;
case SAA7134_BOARD_FLYDVBT_LR301:
case SAA7134_BOARD_FLYDVBTDUO:
ir_codes = ir_codes_flydvb;
mask_keycode = 0x0001F00;
mask_keydown = 0x0040000;
break;
}
if (NULL == ir_codes) {
printk("%s: Oops: IR config error [card=%d]\n",
dev->name, dev->board);
return -ENODEV;
}
ir = kzalloc(sizeof(*ir), GFP_KERNEL);
input_dev = input_allocate_device();
if (!ir || !input_dev) {
kfree(ir);
input_free_device(input_dev);
return -ENOMEM;
}
ir->dev = input_dev;
/* init hardware-specific stuff */
ir->mask_keycode = mask_keycode;
ir->mask_keydown = mask_keydown;
ir->mask_keyup = mask_keyup;
ir->polling = polling;
/* init input device */
snprintf(ir->name, sizeof(ir->name), "saa7134 IR (%s)",
saa7134_boards[dev->board].name);
snprintf(ir->phys, sizeof(ir->phys), "pci-%s/ir0",
pci_name(dev->pci));
ir_input_init(input_dev, &ir->ir, ir_type, ir_codes);
input_dev->name = ir->name;
input_dev->phys = ir->phys;
input_dev->id.bustype = BUS_PCI;
input_dev->id.version = 1;
if (dev->pci->subsystem_vendor) {
input_dev->id.vendor = dev->pci->subsystem_vendor;
input_dev->id.product = dev->pci->subsystem_device;
} else {
input_dev->id.vendor = dev->pci->vendor;
input_dev->id.product = dev->pci->device;
}
input_dev->cdev.dev = &dev->pci->dev;
/* all done */
dev->remote = ir;
if (ir->polling) {
init_timer(&ir->timer);
ir->timer.function = saa7134_input_timer;
ir->timer.data = (unsigned long)dev;
ir->timer.expires = jiffies + HZ;
add_timer(&ir->timer);
}
input_register_device(ir->dev);
return 0;
}
void saa7134_input_fini(struct saa7134_dev *dev)
{
if (NULL == dev->remote)
return;
if (dev->remote->polling)
del_timer_sync(&dev->remote->timer);
input_unregister_device(dev->remote->dev);
kfree(dev->remote);
dev->remote = NULL;
}
void saa7134_set_i2c_ir(struct saa7134_dev *dev, struct IR_i2c *ir)
{
if (disable_ir) {
dprintk("Found supported i2c remote, but IR has been disabled\n");
ir->get_key=NULL;
return;
}
switch (dev->board) {
case SAA7134_BOARD_PINNACLE_PCTV_110i:
snprintf(ir->c.name, sizeof(ir->c.name), "Pinnacle PCTV");
ir->get_key = get_key_pinnacle;
ir->ir_codes = ir_codes_pinnacle;
break;
case SAA7134_BOARD_UPMOST_PURPLE_TV:
snprintf(ir->c.name, sizeof(ir->c.name), "Purple TV");
ir->get_key = get_key_purpletv;
ir->ir_codes = ir_codes_purpletv;
break;
default:
dprintk("Shouldn't get here: Unknown board %x for I2C IR?\n",dev->board);
break;
}
}
/* ----------------------------------------------------------------------
* Local variables:
* c-basic-offset: 8
* End:
*/
View Git Blame Copy Permalink