kevin/linux
1
Fork 0
Code
9e1e7b068d
linux/sound/isa/sc6000.c
Krzysztof Helt 760fc6b838 ALSA: wss_lib: use wss detection code instead of ad1848 one 
Use the wss detection code and kill the ad1848 library.
The library is fully assimilated into the new wss library.

This required reworking of the AD1848 family code
so the code is changed to correctly detect chips from
the AD1848 and CS4231 families.

I have tested it on following cards:
Gallant SC-6600 (codec: AD1848, driver: snd-sc6600)
SoundScape VIVO/90 (codec: AD1845, driver: snd-sscape)
SG Waverider (codec: CS4231A, driver: Rene Herman's snd-galaxy)
Opti930 (codec: built-in - CS4231 compatible, driver: snd-opti93x)
Opti931 (codec: built-in - CS4231 compatible, driver: snd-opti93x)
Gallant SC-70P (chip/codec: CS4237B, driver: snd-cs4236)
Audio Plus 3D (chip/codec: CMI8330A, driver: snd-cmi8330)
Dell Latitude CP (chip/codec: cs4236, driver snd-cs4232)

Sound playback and recording works on all these cards.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Reviewed-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-06 15:40:02 +02:00

656 lines
16 KiB
C
Raw Blame History

/*
* Driver for Gallant SC-6000 soundcard. This card is also known as
* Audio Excel DSP 16 or Zoltrix AV302.
* These cards use CompuMedia ASC-9308 chip + AD1848 codec.
*
* Copyright (C) 2007 Krzysztof Helt <krzysztof.h1@wp.pl>
*
* I don't have documentation for this card. I used the driver
* for OSS/Free included in the kernel source as reference.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/isa.h>
#include <linux/io.h>
#include <asm/dma.h>
#include <sound/core.h>
#include <sound/wss.h>
#include <sound/opl3.h>
#include <sound/mpu401.h>
#include <sound/control.h>
#define SNDRV_LEGACY_FIND_FREE_IRQ
#define SNDRV_LEGACY_FIND_FREE_DMA
#include <sound/initval.h>
MODULE_AUTHOR("Krzysztof Helt");
MODULE_DESCRIPTION("Gallant SC-6000");
MODULE_LICENSE("GPL");
MODULE_SUPPORTED_DEVICE("{{Gallant, SC-6000},"
"{AudioExcel, Audio Excel DSP 16},"
"{Zoltrix, AV302}}");
static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-MAX */
static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* ID for this card */
static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE; /* Enable this card */
static long port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; /* 0x220, 0x240 */
static int irq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ; /* 5, 7, 9, 10, 11 */
static long mss_port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; /* 0x530, 0xe80 */
static long mpu_port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT;
/* 0x300, 0x310, 0x320, 0x330 */
static int mpu_irq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ; /* 5, 7, 9, 10, 0 */
static int dma[SNDRV_CARDS] = SNDRV_DEFAULT_DMA; /* 0, 1, 3 */
module_param_array(index, int, NULL, 0444);
MODULE_PARM_DESC(index, "Index value for sc-6000 based soundcard.");
module_param_array(id, charp, NULL, 0444);
MODULE_PARM_DESC(id, "ID string for sc-6000 based soundcard.");
module_param_array(enable, bool, NULL, 0444);
MODULE_PARM_DESC(enable, "Enable sc-6000 based soundcard.");
module_param_array(port, long, NULL, 0444);
MODULE_PARM_DESC(port, "Port # for sc-6000 driver.");
module_param_array(mss_port, long, NULL, 0444);
MODULE_PARM_DESC(mss_port, "MSS Port # for sc-6000 driver.");
module_param_array(mpu_port, long, NULL, 0444);
MODULE_PARM_DESC(mpu_port, "MPU-401 port # for sc-6000 driver.");
module_param_array(irq, int, NULL, 0444);
MODULE_PARM_DESC(irq, "IRQ # for sc-6000 driver.");
module_param_array(mpu_irq, int, NULL, 0444);
MODULE_PARM_DESC(mpu_irq, "MPU-401 IRQ # for sc-6000 driver.");
module_param_array(dma, int, NULL, 0444);
MODULE_PARM_DESC(dma, "DMA # for sc-6000 driver.");
/*
* Commands of SC6000's DSP (SBPRO+special).
* Some of them are COMMAND_xx, in the future they may change.
*/
#define WRITE_MDIRQ_CFG 0x50 /* Set M&I&DRQ mask (the real config) */
#define COMMAND_52 0x52 /* */
#define READ_HARD_CFG 0x58 /* Read Hardware Config (I/O base etc) */
#define COMMAND_5C 0x5c /* */
#define COMMAND_60 0x60 /* */
#define COMMAND_66 0x66 /* */
#define COMMAND_6C 0x6c /* */
#define COMMAND_6E 0x6e /* */
#define COMMAND_88 0x88 /* Unknown command */
#define DSP_INIT_MSS 0x8c /* Enable Microsoft Sound System mode */
#define COMMAND_C5 0xc5 /* */
#define GET_DSP_VERSION 0xe1 /* Get DSP Version */
#define GET_DSP_COPYRIGHT 0xe3 /* Get DSP Copyright */
/*
* Offsets of SC6000 DSP I/O ports. The offset is added to base I/O port
* to have the actual I/O port.
* Register permissions are:
* (wo) == Write Only
* (ro) == Read Only
* (w-) == Write
* (r-) == Read
*/
#define DSP_RESET 0x06 /* offset of DSP RESET (wo) */
#define DSP_READ 0x0a /* offset of DSP READ (ro) */
#define DSP_WRITE 0x0c /* offset of DSP WRITE (w-) */
#define DSP_COMMAND 0x0c /* offset of DSP COMMAND (w-) */
#define DSP_STATUS 0x0c /* offset of DSP STATUS (r-) */
#define DSP_DATAVAIL 0x0e /* offset of DSP DATA AVAILABLE (ro) */
#define PFX "sc6000: "
#define DRV_NAME "SC-6000"
/* hardware dependent functions */
/*
* sc6000_irq_to_softcfg - Decode irq number into cfg code.
*/
static __devinit unsigned char sc6000_irq_to_softcfg(int irq)
{
unsigned char val = 0;
switch (irq) {
case 5:
val = 0x28;
break;
case 7:
val = 0x8;
break;
case 9:
val = 0x10;
break;
case 10:
val = 0x18;
break;
case 11:
val = 0x20;
break;
default:
break;
}
return val;
}
/*
* sc6000_dma_to_softcfg - Decode dma number into cfg code.
*/
static __devinit unsigned char sc6000_dma_to_softcfg(int dma)
{
unsigned char val = 0;
switch (dma) {
case 0:
val = 1;
break;
case 1:
val = 2;
break;
case 3:
val = 3;
break;
default:
break;
}
return val;
}
/*
* sc6000_mpu_irq_to_softcfg - Decode MPU-401 irq number into cfg code.
*/
static __devinit unsigned char sc6000_mpu_irq_to_softcfg(int mpu_irq)
{
unsigned char val = 0;
switch (mpu_irq) {
case 5:
val = 4;
break;
case 7:
val = 0x44;
break;
case 9:
val = 0x84;
break;
case 10:
val = 0xc4;
break;
default:
break;
}
return val;
}
static __devinit int sc6000_wait_data(char __iomem *vport)
{
int loop = 1000;
unsigned char val = 0;
do {
val = ioread8(vport + DSP_DATAVAIL);
if (val & 0x80)
return 0;
cpu_relax();
} while (loop--);
return -EAGAIN;
}
static __devinit int sc6000_read(char __iomem *vport)
{
if (sc6000_wait_data(vport))
return -EBUSY;
return ioread8(vport + DSP_READ);
}
static __devinit int sc6000_write(char __iomem *vport, int cmd)
{
unsigned char val;
int loop = 500000;
do {
val = ioread8(vport + DSP_STATUS);
/*
* DSP ready to receive data if bit 7 of val == 0
*/
if (!(val & 0x80)) {
iowrite8(cmd, vport + DSP_COMMAND);
return 0;
}
cpu_relax();
} while (loop--);
snd_printk(KERN_ERR "DSP Command (0x%x) timeout.\n", cmd);
return -EIO;
}
static int __devinit sc6000_dsp_get_answer(char __iomem *vport, int command,
char *data, int data_len)
{
int len = 0;
if (sc6000_write(vport, command)) {
snd_printk(KERN_ERR "CMD 0x%x: failed!\n", command);
return -EIO;
}
do {
int val = sc6000_read(vport);
if (val < 0)
break;
data[len++] = val;
} while (len < data_len);
/*
* If no more data available, return to the caller, no error if len>0.
* We have no other way to know when the string is finished.
*/
return len ? len : -EIO;
}
static int __devinit sc6000_dsp_reset(char __iomem *vport)
{
iowrite8(1, vport + DSP_RESET);
udelay(10);
iowrite8(0, vport + DSP_RESET);
udelay(20);
if (sc6000_read(vport) == 0xaa)
return 0;
return -ENODEV;
}
/* detection and initialization */
static int __devinit sc6000_cfg_write(char __iomem *vport,
unsigned char softcfg)
{
if (sc6000_write(vport, WRITE_MDIRQ_CFG)) {
snd_printk(KERN_ERR "CMD 0x%x: failed!\n", WRITE_MDIRQ_CFG);
return -EIO;
}
if (sc6000_write(vport, softcfg)) {
snd_printk(KERN_ERR "sc6000_cfg_write: failed!\n");
return -EIO;
}
return 0;
}
static int __devinit sc6000_setup_board(char __iomem *vport, int config)
{
int loop = 10;
do {
if (sc6000_write(vport, COMMAND_88)) {
snd_printk(KERN_ERR "CMD 0x%x: failed!\n",
COMMAND_88);
return -EIO;
}
} while ((sc6000_wait_data(vport) < 0) && loop--);
if (sc6000_read(vport) < 0) {
snd_printk(KERN_ERR "sc6000_read after CMD 0x%x: failed\n",
COMMAND_88);
return -EIO;
}
if (sc6000_cfg_write(vport, config))
return -ENODEV;
return 0;
}
static int __devinit sc6000_init_mss(char __iomem *vport, int config,
char __iomem *vmss_port, int mss_config)
{
if (sc6000_write(vport, DSP_INIT_MSS)) {
snd_printk(KERN_ERR "sc6000_init_mss [0x%x]: failed!\n",
DSP_INIT_MSS);
return -EIO;
}
msleep(10);
if (sc6000_cfg_write(vport, config))
return -EIO;
iowrite8(mss_config, vmss_port);
return 0;
}
static int __devinit sc6000_init_board(char __iomem *vport, int irq, int dma,
char __iomem *vmss_port, int mpu_irq)
{
char answer[15];
char version[2];
int mss_config = sc6000_irq_to_softcfg(irq) |
sc6000_dma_to_softcfg(dma);
int config = mss_config |
sc6000_mpu_irq_to_softcfg(mpu_irq);
int err;
err = sc6000_dsp_reset(vport);
if (err < 0) {
snd_printk(KERN_ERR "sc6000_dsp_reset: failed!\n");
return err;
}
memset(answer, 0, sizeof(answer));
err = sc6000_dsp_get_answer(vport, GET_DSP_COPYRIGHT, answer, 15);
if (err <= 0) {
snd_printk(KERN_ERR "sc6000_dsp_copyright: failed!\n");
return -ENODEV;
}
/*
* My SC-6000 card return "SC-6000" in DSPCopyright, so
* if we have something different, we have to be warned.
* Mine returns "SC-6000A " - KH
*/
if (strncmp("SC-6000", answer, 7))
snd_printk(KERN_WARNING "Warning: non SC-6000 audio card!\n");
if (sc6000_dsp_get_answer(vport, GET_DSP_VERSION, version, 2) < 2) {
snd_printk(KERN_ERR "sc6000_dsp_version: failed!\n");
return -ENODEV;
}
printk(KERN_INFO PFX "Detected model: %s, DSP version %d.%d\n",
answer, version[0], version[1]);
/*
* 0x0A == (IRQ 7, DMA 1, MIRQ 0)
*/
err = sc6000_cfg_write(vport, 0x0a);
if (err < 0) {
snd_printk(KERN_ERR "sc6000_cfg_write: failed!\n");
return -EFAULT;
}
err = sc6000_setup_board(vport, config);
if (err < 0) {
snd_printk(KERN_ERR "sc6000_setup_board: failed!\n");
return -ENODEV;
}
err = sc6000_init_mss(vport, config, vmss_port, mss_config);
if (err < 0) {
snd_printk(KERN_ERR "Can not initialize "
"Microsoft Sound System mode.\n");
return -ENODEV;
}
return 0;
}
static int __devinit snd_sc6000_mixer(struct snd_wss *chip)
{
struct snd_card *card = chip->card;
struct snd_ctl_elem_id id1, id2;
int err;
memset(&id1, 0, sizeof(id1));
memset(&id2, 0, sizeof(id2));
id1.iface = SNDRV_CTL_ELEM_IFACE_MIXER;
id2.iface = SNDRV_CTL_ELEM_IFACE_MIXER;
/* reassign AUX0 to FM */
strcpy(id1.name, "Aux Playback Switch");
strcpy(id2.name, "FM Playback Switch");
err = snd_ctl_rename_id(card, &id1, &id2);
if (err < 0)
return err;
strcpy(id1.name, "Aux Playback Volume");
strcpy(id2.name, "FM Playback Volume");
err = snd_ctl_rename_id(card, &id1, &id2);
if (err < 0)
return err;
/* reassign AUX1 to CD */
strcpy(id1.name, "Aux Playback Switch"); id1.index = 1;
strcpy(id2.name, "CD Playback Switch");
err = snd_ctl_rename_id(card, &id1, &id2);
if (err < 0)
return err;
strcpy(id1.name, "Aux Playback Volume");
strcpy(id2.name, "CD Playback Volume");
err = snd_ctl_rename_id(card, &id1, &id2);
if (err < 0)
return err;
return 0;
}
static int __devinit snd_sc6000_match(struct device *devptr, unsigned int dev)
{
if (!enable[dev])
return 0;
if (port[dev] == SNDRV_AUTO_PORT) {
printk(KERN_ERR PFX "specify IO port\n");
return 0;
}
if (mss_port[dev] == SNDRV_AUTO_PORT) {
printk(KERN_ERR PFX "specify MSS port\n");
return 0;
}
if (port[dev] != 0x220 && port[dev] != 0x240) {
printk(KERN_ERR PFX "Port must be 0x220 or 0x240\n");
return 0;
}
if (mss_port[dev] != 0x530 && mss_port[dev] != 0xe80) {
printk(KERN_ERR PFX "MSS port must be 0x530 or 0xe80\n");
return 0;
}
if (irq[dev] != SNDRV_AUTO_IRQ && !sc6000_irq_to_softcfg(irq[dev])) {
printk(KERN_ERR PFX "invalid IRQ %d\n", irq[dev]);
return 0;
}
if (dma[dev] != SNDRV_AUTO_DMA && !sc6000_dma_to_softcfg(dma[dev])) {
printk(KERN_ERR PFX "invalid DMA %d\n", dma[dev]);
return 0;
}
if (mpu_port[dev] != SNDRV_AUTO_PORT &&
(mpu_port[dev] & ~0x30L) != 0x300) {
printk(KERN_ERR PFX "invalid MPU-401 port %lx\n",
mpu_port[dev]);
return 0;
}
if (mpu_port[dev] != SNDRV_AUTO_PORT &&
mpu_irq[dev] != SNDRV_AUTO_IRQ && mpu_irq[dev] != 0 &&
!sc6000_mpu_irq_to_softcfg(mpu_irq[dev])) {
printk(KERN_ERR PFX "invalid MPU-401 IRQ %d\n", mpu_irq[dev]);
return 0;
}
return 1;
}
static int __devinit snd_sc6000_probe(struct device *devptr, unsigned int dev)
{
static int possible_irqs[] = { 5, 7, 9, 10, 11, -1 };
static int possible_dmas[] = { 1, 3, 0, -1 };
int err;
int xirq = irq[dev];
int xdma = dma[dev];
struct snd_card *card;
struct snd_wss *chip;
struct snd_opl3 *opl3;
char __iomem *vport;
char __iomem *vmss_port;
card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0);
if (!card)
return -ENOMEM;
if (xirq == SNDRV_AUTO_IRQ) {
xirq = snd_legacy_find_free_irq(possible_irqs);
if (xirq < 0) {
snd_printk(KERN_ERR PFX "unable to find a free IRQ\n");
err = -EBUSY;
goto err_exit;
}
}
if (xdma == SNDRV_AUTO_DMA) {
xdma = snd_legacy_find_free_dma(possible_dmas);
if (xdma < 0) {
snd_printk(KERN_ERR PFX "unable to find a free DMA\n");
err = -EBUSY;
goto err_exit;
}
}
if (!request_region(port[dev], 0x10, DRV_NAME)) {
snd_printk(KERN_ERR PFX
"I/O port region is already in use.\n");
err = -EBUSY;
goto err_exit;
}
vport = devm_ioport_map(devptr, port[dev], 0x10);
if (!vport) {
snd_printk(KERN_ERR PFX
"I/O port cannot be iomaped.\n");
err = -EBUSY;
goto err_unmap1;
}
/* to make it marked as used */
if (!request_region(mss_port[dev], 4, DRV_NAME)) {
snd_printk(KERN_ERR PFX
"SC-6000 port I/O port region is already in use.\n");
err = -EBUSY;
goto err_unmap1;
}
vmss_port = devm_ioport_map(devptr, mss_port[dev], 4);
if (!vport) {
snd_printk(KERN_ERR PFX
"MSS port I/O cannot be iomaped.\n");
err = -EBUSY;
goto err_unmap2;
}
snd_printd("Initializing BASE[0x%lx] IRQ[%d] DMA[%d] MIRQ[%d]\n",
port[dev], xirq, xdma,
mpu_irq[dev] == SNDRV_AUTO_IRQ ? 0 : mpu_irq[dev]);
err = sc6000_init_board(vport, xirq, xdma, vmss_port, mpu_irq[dev]);
if (err < 0)
goto err_unmap2;
err = snd_wss_create(card, mss_port[dev] + 4, -1, xirq, xdma, -1,
WSS_HW_DETECT, 0, &chip);
if (err < 0)
goto err_unmap2;
card->private_data = chip;
err = snd_wss_pcm(chip, 0, NULL);
if (err < 0) {
snd_printk(KERN_ERR PFX
"error creating new WSS PCM device\n");
goto err_unmap2;
}
err = snd_wss_mixer(chip);
if (err < 0) {
snd_printk(KERN_ERR PFX "error creating new WSS mixer\n");
goto err_unmap2;
}
err = snd_sc6000_mixer(chip);
if (err < 0) {
snd_printk(KERN_ERR PFX "the mixer rewrite failed\n");
goto err_unmap2;
}
if (snd_opl3_create(card,
0x388, 0x388 + 2,
OPL3_HW_AUTO, 0, &opl3) < 0) {
snd_printk(KERN_ERR PFX "no OPL device at 0x%x-0x%x ?\n",
0x388, 0x388 + 2);
} else {
err = snd_opl3_timer_new(opl3, 0, 1);
if (err < 0)
goto err_unmap2;
err = snd_opl3_hwdep_new(opl3, 0, 1, NULL);
if (err < 0)
goto err_unmap2;
}
if (mpu_port[dev] != SNDRV_AUTO_PORT) {
if (mpu_irq[dev] == SNDRV_AUTO_IRQ)
mpu_irq[dev] = -1;
if (snd_mpu401_uart_new(card, 0,
MPU401_HW_MPU401,
mpu_port[dev], 0,
mpu_irq[dev], IRQF_DISABLED,
NULL) < 0)
snd_printk(KERN_ERR "no MPU-401 device at 0x%lx ?\n",
mpu_port[dev]);
}
strcpy(card->driver, DRV_NAME);
strcpy(card->shortname, "SC-6000");
sprintf(card->longname, "Gallant SC-6000 at 0x%lx, irq %d, dma %d",
mss_port[dev], xirq, xdma);
snd_card_set_dev(card, devptr);
err = snd_card_register(card);
if (err < 0)
goto err_unmap2;
dev_set_drvdata(devptr, card);
return 0;
err_unmap2:
release_region(mss_port[dev], 4);
err_unmap1:
release_region(port[dev], 0x10);
err_exit:
snd_card_free(card);
return err;
}
static int __devexit snd_sc6000_remove(struct device *devptr, unsigned int dev)
{
release_region(port[dev], 0x10);
release_region(mss_port[dev], 4);
snd_card_free(dev_get_drvdata(devptr));
dev_set_drvdata(devptr, NULL);
return 0;
}
static struct isa_driver snd_sc6000_driver = {
.match = snd_sc6000_match,
.probe = snd_sc6000_probe,
.remove = __devexit_p(snd_sc6000_remove),
/* FIXME: suspend/resume */
.driver = {
.name = DRV_NAME,
},
};
static int __init alsa_card_sc6000_init(void)
{
return isa_register_driver(&snd_sc6000_driver, SNDRV_CARDS);
}
static void __exit alsa_card_sc6000_exit(void)
{
isa_unregister_driver(&snd_sc6000_driver);
}
module_init(alsa_card_sc6000_init)
module_exit(alsa_card_sc6000_exit)
View Git Blame Copy Permalink