kevin/linux
1
Fork 0
Code
9dbebc7fd0
linux/drivers/net/wireless/ath/ath9k/ar9003_hw.c
Luis R. Rodriguez d5c4d1930c ath9k_hw: dynamically choose the SERDES array for low power 
The array we use will vary depending on whether or not we are
to go to lower power or not. The default values (iniPcieSerdes)
are a copy or what go into the registers through the INI files.

Cc: Aeolus Yang <aeolus.yang@atheros.com>
Cc: Madhan Jaganathan <madhan.jaganathan@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-23 15:14:03 -04:00

339 lines
10 KiB
C
Raw Blame History

/*
* Copyright (c) 2008-2010 Atheros Communications Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#include "hw.h"
#include "ar9003_mac.h"
#include "ar9003_2p0_initvals.h"
#include "ar9003_2p2_initvals.h"
/* General hardware code for the AR9003 hadware family */
static bool ar9003_hw_macversion_supported(u32 macversion)
{
switch (macversion) {
case AR_SREV_VERSION_9300:
return true;
default:
break;
}
return false;
}
/* AR9003 2.0 */
static void ar9003_2p0_hw_init_mode_regs(struct ath_hw *ah)
{
/* mac */
INIT_INI_ARRAY(&ah->iniMac[ATH_INI_PRE], NULL, 0, 0);
INIT_INI_ARRAY(&ah->iniMac[ATH_INI_CORE],
ar9300_2p0_mac_core,
ARRAY_SIZE(ar9300_2p0_mac_core), 2);
INIT_INI_ARRAY(&ah->iniMac[ATH_INI_POST],
ar9300_2p0_mac_postamble,
ARRAY_SIZE(ar9300_2p0_mac_postamble), 5);
/* bb */
INIT_INI_ARRAY(&ah->iniBB[ATH_INI_PRE], NULL, 0, 0);
INIT_INI_ARRAY(&ah->iniBB[ATH_INI_CORE],
ar9300_2p0_baseband_core,
ARRAY_SIZE(ar9300_2p0_baseband_core), 2);
INIT_INI_ARRAY(&ah->iniBB[ATH_INI_POST],
ar9300_2p0_baseband_postamble,
ARRAY_SIZE(ar9300_2p0_baseband_postamble), 5);
/* radio */
INIT_INI_ARRAY(&ah->iniRadio[ATH_INI_PRE], NULL, 0, 0);
INIT_INI_ARRAY(&ah->iniRadio[ATH_INI_CORE],
ar9300_2p0_radio_core,
ARRAY_SIZE(ar9300_2p0_radio_core), 2);
INIT_INI_ARRAY(&ah->iniRadio[ATH_INI_POST],
ar9300_2p0_radio_postamble,
ARRAY_SIZE(ar9300_2p0_radio_postamble), 5);
/* soc */
INIT_INI_ARRAY(&ah->iniSOC[ATH_INI_PRE],
ar9300_2p0_soc_preamble,
ARRAY_SIZE(ar9300_2p0_soc_preamble), 2);
INIT_INI_ARRAY(&ah->iniSOC[ATH_INI_CORE], NULL, 0, 0);
INIT_INI_ARRAY(&ah->iniSOC[ATH_INI_POST],
ar9300_2p0_soc_postamble,
ARRAY_SIZE(ar9300_2p0_soc_postamble), 5);
/* rx/tx gain */
INIT_INI_ARRAY(&ah->iniModesRxGain,
ar9300Common_rx_gain_table_2p0,
ARRAY_SIZE(ar9300Common_rx_gain_table_2p0), 2);
INIT_INI_ARRAY(&ah->iniModesTxGain,
ar9300Modes_lowest_ob_db_tx_gain_table_2p0,
ARRAY_SIZE(ar9300Modes_lowest_ob_db_tx_gain_table_2p0),
5);
/* Load PCIE SERDES settings from INI */
/* Awake Setting */
INIT_INI_ARRAY(&ah->iniPcieSerdes,
ar9300PciePhy_pll_on_clkreq_disable_L1_2p0,
ARRAY_SIZE(ar9300PciePhy_pll_on_clkreq_disable_L1_2p0),
2);
/* Sleep Setting */
INIT_INI_ARRAY(&ah->iniPcieSerdesLowPower,
ar9300PciePhy_clkreq_enable_L1_2p0,
ARRAY_SIZE(ar9300PciePhy_clkreq_enable_L1_2p0),
2);
/* Fast clock modal settings */
INIT_INI_ARRAY(&ah->iniModesAdditional,
ar9300Modes_fast_clock_2p0,
ARRAY_SIZE(ar9300Modes_fast_clock_2p0),
3);
}
/* AR9003 2.2 */
static void ar9003_2p2_hw_init_mode_regs(struct ath_hw *ah)
{
/* mac */
INIT_INI_ARRAY(&ah->iniMac[ATH_INI_PRE], NULL, 0, 0);
INIT_INI_ARRAY(&ah->iniMac[ATH_INI_CORE],
ar9300_2p2_mac_core,
ARRAY_SIZE(ar9300_2p2_mac_core), 2);
INIT_INI_ARRAY(&ah->iniMac[ATH_INI_POST],
ar9300_2p2_mac_postamble,
ARRAY_SIZE(ar9300_2p2_mac_postamble), 5);
/* bb */
INIT_INI_ARRAY(&ah->iniBB[ATH_INI_PRE], NULL, 0, 0);
INIT_INI_ARRAY(&ah->iniBB[ATH_INI_CORE],
ar9300_2p2_baseband_core,
ARRAY_SIZE(ar9300_2p2_baseband_core), 2);
INIT_INI_ARRAY(&ah->iniBB[ATH_INI_POST],
ar9300_2p2_baseband_postamble,
ARRAY_SIZE(ar9300_2p2_baseband_postamble), 5);
/* radio */
INIT_INI_ARRAY(&ah->iniRadio[ATH_INI_PRE], NULL, 0, 0);
INIT_INI_ARRAY(&ah->iniRadio[ATH_INI_CORE],
ar9300_2p2_radio_core,
ARRAY_SIZE(ar9300_2p2_radio_core), 2);
INIT_INI_ARRAY(&ah->iniRadio[ATH_INI_POST],
ar9300_2p2_radio_postamble,
ARRAY_SIZE(ar9300_2p2_radio_postamble), 5);
/* soc */
INIT_INI_ARRAY(&ah->iniSOC[ATH_INI_PRE],
ar9300_2p2_soc_preamble,
ARRAY_SIZE(ar9300_2p2_soc_preamble), 2);
INIT_INI_ARRAY(&ah->iniSOC[ATH_INI_CORE], NULL, 0, 0);
INIT_INI_ARRAY(&ah->iniSOC[ATH_INI_POST],
ar9300_2p2_soc_postamble,
ARRAY_SIZE(ar9300_2p2_soc_postamble), 5);
/* rx/tx gain */
INIT_INI_ARRAY(&ah->iniModesRxGain,
ar9300Common_rx_gain_table_2p2,
ARRAY_SIZE(ar9300Common_rx_gain_table_2p2), 2);
INIT_INI_ARRAY(&ah->iniModesTxGain,
ar9300Modes_lowest_ob_db_tx_gain_table_2p2,
ARRAY_SIZE(ar9300Modes_lowest_ob_db_tx_gain_table_2p2),
5);
/* Load PCIE SERDES settings from INI */
/* Awake Setting */
INIT_INI_ARRAY(&ah->iniPcieSerdes,
ar9300PciePhy_pll_on_clkreq_disable_L1_2p2,
ARRAY_SIZE(ar9300PciePhy_pll_on_clkreq_disable_L1_2p2),
2);
/* Sleep Setting */
INIT_INI_ARRAY(&ah->iniPcieSerdesLowPower,
ar9300PciePhy_clkreq_enable_L1_2p2,
ARRAY_SIZE(ar9300PciePhy_clkreq_enable_L1_2p2),
2);
/* Fast clock modal settings */
INIT_INI_ARRAY(&ah->iniModesAdditional,
ar9300Modes_fast_clock_2p2,
ARRAY_SIZE(ar9300Modes_fast_clock_2p2),
3);
}
/*
* The AR9003 family uses a new INI format (pre, core, post
* arrays per subsystem).
*/
static void ar9003_hw_init_mode_regs(struct ath_hw *ah)
{
if (AR_SREV_9300_20(ah))
ar9003_2p0_hw_init_mode_regs(ah);
else
ar9003_2p2_hw_init_mode_regs(ah);
}
static void ar9003_tx_gain_table_apply(struct ath_hw *ah)
{
switch (ar9003_hw_get_tx_gain_idx(ah)) {
case 0:
default:
if (AR_SREV_9300_20(ah))
INIT_INI_ARRAY(&ah->iniModesTxGain,
ar9300Modes_lowest_ob_db_tx_gain_table_2p0,
ARRAY_SIZE(ar9300Modes_lowest_ob_db_tx_gain_table_2p0),
5);
else
INIT_INI_ARRAY(&ah->iniModesTxGain,
ar9300Modes_lowest_ob_db_tx_gain_table_2p2,
ARRAY_SIZE(ar9300Modes_lowest_ob_db_tx_gain_table_2p2),
5);
break;
case 1:
if (AR_SREV_9300_20(ah))
INIT_INI_ARRAY(&ah->iniModesTxGain,
ar9300Modes_high_ob_db_tx_gain_table_2p0,
ARRAY_SIZE(ar9300Modes_high_ob_db_tx_gain_table_2p0),
5);
else
INIT_INI_ARRAY(&ah->iniModesTxGain,
ar9300Modes_high_ob_db_tx_gain_table_2p2,
ARRAY_SIZE(ar9300Modes_high_ob_db_tx_gain_table_2p2),
5);
break;
case 2:
if (AR_SREV_9300_20(ah))
INIT_INI_ARRAY(&ah->iniModesTxGain,
ar9300Modes_low_ob_db_tx_gain_table_2p0,
ARRAY_SIZE(ar9300Modes_low_ob_db_tx_gain_table_2p0),
5);
else
INIT_INI_ARRAY(&ah->iniModesTxGain,
ar9300Modes_low_ob_db_tx_gain_table_2p2,
ARRAY_SIZE(ar9300Modes_low_ob_db_tx_gain_table_2p2),
5);
break;
}
}
static void ar9003_rx_gain_table_apply(struct ath_hw *ah)
{
switch (ar9003_hw_get_rx_gain_idx(ah)) {
case 0:
default:
if (AR_SREV_9300_20(ah))
INIT_INI_ARRAY(&ah->iniModesRxGain,
ar9300Common_rx_gain_table_2p0,
ARRAY_SIZE(ar9300Common_rx_gain_table_2p0),
2);
else
INIT_INI_ARRAY(&ah->iniModesRxGain,
ar9300Common_rx_gain_table_2p2,
ARRAY_SIZE(ar9300Common_rx_gain_table_2p2),
2);
break;
case 1:
if (AR_SREV_9300_20(ah))
INIT_INI_ARRAY(&ah->iniModesRxGain,
ar9300Common_wo_xlna_rx_gain_table_2p0,
ARRAY_SIZE(ar9300Common_wo_xlna_rx_gain_table_2p0),
2);
else
INIT_INI_ARRAY(&ah->iniModesRxGain,
ar9300Common_wo_xlna_rx_gain_table_2p2,
ARRAY_SIZE(ar9300Common_wo_xlna_rx_gain_table_2p2),
2);
break;
}
}
/* set gain table pointers according to values read from the eeprom */
static void ar9003_hw_init_mode_gain_regs(struct ath_hw *ah)
{
ar9003_tx_gain_table_apply(ah);
ar9003_rx_gain_table_apply(ah);
}
/*
* Helper for ASPM support.
*
* Disable PLL when in L0s as well as receiver clock when in L1.
* This power saving option must be enabled through the SerDes.
*
* Programming the SerDes must go through the same 288 bit serial shift
* register as the other analog registers. Hence the 9 writes.
*/
static void ar9003_hw_configpcipowersave(struct ath_hw *ah,
int restore,
int power_off)
{
if (ah->is_pciexpress != true)
return;
/* Do not touch SerDes registers */
if (ah->config.pcie_powersave_enable == 2)
return;
/* Nothing to do on restore for 11N */
if (!restore) {
/* set bit 19 to allow forcing of pcie core into L1 state */
REG_SET_BIT(ah, AR_PCIE_PM_CTRL, AR_PCIE_PM_CTRL_ENA);
/* Several PCIe massages to ensure proper behaviour */
if (ah->config.pcie_waen)
REG_WRITE(ah, AR_WA, ah->config.pcie_waen);
else
REG_WRITE(ah, AR_WA, ah->WARegVal);
}
/*
* Configire PCIE after Ini init. SERDES values now come from ini file
* This enables PCIe low power mode.
*/
if (ah->config.pcieSerDesWrite) {
unsigned int i;
struct ar5416IniArray *array;
array = power_off ? &ah->iniPcieSerdes :
&ah->iniPcieSerdesLowPower;
for (i = 0; i < array->ia_rows; i++) {
REG_WRITE(ah,
INI_RA(array, i, 0),
INI_RA(array, i, 1));
}
}
}
/* Sets up the AR9003 hardware familiy callbacks */
void ar9003_hw_attach_ops(struct ath_hw *ah)
{
struct ath_hw_private_ops *priv_ops = ath9k_hw_private_ops(ah);
struct ath_hw_ops *ops = ath9k_hw_ops(ah);
priv_ops->init_mode_regs = ar9003_hw_init_mode_regs;
priv_ops->init_mode_gain_regs = ar9003_hw_init_mode_gain_regs;
priv_ops->macversion_supported = ar9003_hw_macversion_supported;
ops->config_pci_powersave = ar9003_hw_configpcipowersave;
ar9003_hw_attach_phy_ops(ah);
ar9003_hw_attach_calib_ops(ah);
ar9003_hw_attach_mac_ops(ah);
ath9k_hw_attach_ani_ops_new(ah);
}
View Git Blame Copy Permalink