1
linux/drivers/usb
Alan Stern 9beeee6584 USB: EHCI: log a warning if ehci-hcd is not loaded first
This patch (as1139) adds a warning to the system log whenever ehci-hcd
is loaded after ohci-hcd or uhci-hcd.  Nowadays most distributions are
pretty good about not doing this; maybe the warning will help convince
anyone still doing it wrong.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>  [2.6.27]
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17 14:41:03 -07:00
..
atm usbatm: Use skb_queue_walk_safe() instead of by-hand implementation. 2008-09-23 00:27:47 -07:00
c67x00
class drivers/usb/class/usblp.c: adjust error handling code 2008-10-17 14:40:51 -07:00
core USB: EHCI: log a warning if ehci-hcd is not loaded first 2008-10-17 14:41:03 -07:00
gadget usb gadget: cdc ethernet notification bugfix 2008-10-17 14:41:01 -07:00
host USB: EHCI: log a warning if ehci-hcd is not loaded first 2008-10-17 14:41:03 -07:00
image
misc USB: ftdi-elan: Always pass usb_bulk_msg() a timeout in milliseconds. 2008-10-17 14:41:02 -07:00
mon usbmon: fix tiny race exposed by the fastboot patches 2008-10-17 14:40:57 -07:00
musb usb: musb: remove dead code from procfs 2008-10-17 14:40:59 -07:00
serial USB: ti_usb_3410_5052: removed duplicated include 2008-10-17 14:41:01 -07:00
storage usb-storage: report underflow with no sense data 2008-10-17 14:40:54 -07:00
Kconfig USB: Add MUSB and TUSB support 2008-08-13 17:33:00 -07:00
Makefile
README
usb-skeleton.c

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.