kevin/linux
1
Fork 0
Code
9b80fee149
linux/drivers/usb/gadget/fsl_qe_udc.h
Li Yang 928dfa6c62 usb/fsl_qe_udc: fix response to get status request 
The original code didn't respond correctly to get status request on
device and endpoint.  Although normal operations can work without the
fix.  It is not compliant with USB spec chapter9 and fails USBCV ch9
tests.  The patch fix this and a few style/typo problems.

Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17 14:41:08 -07:00

438 lines
12 KiB
C
Raw Blame History

/*
* drivers/usb/gadget/qe_udc.h
*
* Copyright (C) 2006-2008 Freescale Semiconductor, Inc. All rights reserved.
*
* Xiaobo Xie <X.Xie@freescale.com>
* Li Yang <leoli@freescale.com>
*
* Description:
* Freescale USB device/endpoint management registers
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or (at
* your option) any later version.
*/
#ifndef __FSL_QE_UDC_H
#define __FSL_QE_UDC_H
/* SoC type */
#define PORT_CPM 0
#define PORT_QE 1
#define USB_MAX_ENDPOINTS 4
#define USB_MAX_PIPES USB_MAX_ENDPOINTS
#define USB_EP0_MAX_SIZE 64
#define USB_MAX_CTRL_PAYLOAD 0x4000
#define USB_BDRING_LEN 16
#define USB_BDRING_LEN_RX 256
#define USB_BDRING_LEN_TX 16
#define MIN_EMPTY_BDS 128
#define MAX_DATA_BDS 8
#define USB_CRC_SIZE 2
#define USB_DIR_BOTH 0x88
#define R_BUF_MAXSIZE 0x800
#define USB_EP_PARA_ALIGNMENT 32
/* USB Mode Register bit define */
#define USB_MODE_EN 0x01
#define USB_MODE_HOST 0x02
#define USB_MODE_TEST 0x04
#define USB_MODE_SFTE 0x08
#define USB_MODE_RESUME 0x40
#define USB_MODE_LSS 0x80
/* USB Slave Address Register Mask */
#define USB_SLVADDR_MASK 0x7F
/* USB Endpoint register define */
#define USB_EPNUM_MASK 0xF000
#define USB_EPNUM_SHIFT 12
#define USB_TRANS_MODE_SHIFT 8
#define USB_TRANS_CTR 0x0000
#define USB_TRANS_INT 0x0100
#define USB_TRANS_BULK 0x0200
#define USB_TRANS_ISO 0x0300
#define USB_EP_MF 0x0020
#define USB_EP_RTE 0x0010
#define USB_THS_SHIFT 2
#define USB_THS_MASK 0x000c
#define USB_THS_NORMAL 0x0
#define USB_THS_IGNORE_IN 0x0004
#define USB_THS_NACK 0x0008
#define USB_THS_STALL 0x000c
#define USB_RHS_SHIFT 0
#define USB_RHS_MASK 0x0003
#define USB_RHS_NORMAL 0x0
#define USB_RHS_IGNORE_OUT 0x0001
#define USB_RHS_NACK 0x0002
#define USB_RHS_STALL 0x0003
#define USB_RTHS_MASK 0x000f
/* USB Command Register define */
#define USB_CMD_STR_FIFO 0x80
#define USB_CMD_FLUSH_FIFO 0x40
#define USB_CMD_ISFT 0x20
#define USB_CMD_DSFT 0x10
#define USB_CMD_EP_MASK 0x03
/* USB Event and Mask Register define */
#define USB_E_MSF_MASK 0x0800
#define USB_E_SFT_MASK 0x0400
#define USB_E_RESET_MASK 0x0200
#define USB_E_IDLE_MASK 0x0100
#define USB_E_TXE4_MASK 0x0080
#define USB_E_TXE3_MASK 0x0040
#define USB_E_TXE2_MASK 0x0020
#define USB_E_TXE1_MASK 0x0010
#define USB_E_SOF_MASK 0x0008
#define USB_E_BSY_MASK 0x0004
#define USB_E_TXB_MASK 0x0002
#define USB_E_RXB_MASK 0x0001
#define USBER_ALL_CLEAR 0x0fff
#define USB_E_DEFAULT_DEVICE (USB_E_RESET_MASK | USB_E_TXE4_MASK | \
USB_E_TXE3_MASK | USB_E_TXE2_MASK | \
USB_E_TXE1_MASK | USB_E_BSY_MASK | \
USB_E_TXB_MASK | USB_E_RXB_MASK)
#define USB_E_TXE_MASK (USB_E_TXE4_MASK | USB_E_TXE3_MASK|\
USB_E_TXE2_MASK | USB_E_TXE1_MASK)
/* USB Status Register define */
#define USB_IDLE_STATUS_MASK 0x01
/* USB Start of Frame Timer */
#define USB_USSFT_MASK 0x3FFF
/* USB Frame Number Register */
#define USB_USFRN_MASK 0xFFFF
struct usb_device_para{
u16 epptr[4];
u32 rstate;
u32 rptr;
u16 frame_n;
u16 rbcnt;
u32 rtemp;
u32 rxusb_data;
u16 rxuptr;
u8 reso[2];
u32 softbl;
u8 sofucrctemp;
};
struct usb_ep_para{
u16 rbase;
u16 tbase;
u8 rbmr;
u8 tbmr;
u16 mrblr;
u16 rbptr;
u16 tbptr;
u32 tstate;
u32 tptr;
u16 tcrc;
u16 tbcnt;
u32 ttemp;
u16 txusbu_ptr;
u8 reserve[2];
};
#define USB_BUSMODE_GBL 0x20
#define USB_BUSMODE_BO_MASK 0x18
#define USB_BUSMODE_BO_SHIFT 0x3
#define USB_BUSMODE_BE 0x2
#define USB_BUSMODE_CETM 0x04
#define USB_BUSMODE_DTB 0x02
/* Endpoint basic handle */
#define ep_index(EP) ((EP)->desc->bEndpointAddress & 0xF)
#define ep_maxpacket(EP) ((EP)->ep.maxpacket)
#define ep_is_in(EP) ((ep_index(EP) == 0) ? (EP->udc->ep0_dir == \
USB_DIR_IN) : ((EP)->desc->bEndpointAddress \
& USB_DIR_IN) == USB_DIR_IN)
/* ep0 transfer state */
#define WAIT_FOR_SETUP 0
#define DATA_STATE_XMIT 1
#define DATA_STATE_NEED_ZLP 2
#define WAIT_FOR_OUT_STATUS 3
#define DATA_STATE_RECV 4
/* ep tramsfer mode */
#define USBP_TM_CTL 0
#define USBP_TM_ISO 1
#define USBP_TM_BULK 2
#define USBP_TM_INT 3
/*-----------------------------------------------------------------------------
USB RX And TX DATA Frame
-----------------------------------------------------------------------------*/
struct qe_frame{
u8 *data;
u32 len;
u32 status;
u32 info;
void *privdata;
struct list_head node;
};
/* Frame structure, info field. */
#define PID_DATA0 0x80000000 /* Data toggle zero */
#define PID_DATA1 0x40000000 /* Data toggle one */
#define PID_SETUP 0x20000000 /* setup bit */
#define SETUP_STATUS 0x10000000 /* setup status bit */
#define SETADDR_STATUS 0x08000000 /* setupup address status bit */
#define NO_REQ 0x04000000 /* Frame without request */
#define HOST_DATA 0x02000000 /* Host data frame */
#define FIRST_PACKET_IN_FRAME 0x01000000 /* first packet in the frame */
#define TOKEN_FRAME 0x00800000 /* Host token frame */
#define ZLP 0x00400000 /* Zero length packet */
#define IN_TOKEN_FRAME 0x00200000 /* In token package */
#define OUT_TOKEN_FRAME 0x00100000 /* Out token package */
#define SETUP_TOKEN_FRAME 0x00080000 /* Setup token package */
#define STALL_FRAME 0x00040000 /* Stall handshake */
#define NACK_FRAME 0x00020000 /* Nack handshake */
#define NO_PID 0x00010000 /* No send PID */
#define NO_CRC 0x00008000 /* No send CRC */
#define HOST_COMMAND 0x00004000 /* Host command frame */
/* Frame status field */
/* Receive side */
#define FRAME_OK 0x00000000 /* Frame tranmitted or received OK */
#define FRAME_ERROR 0x80000000 /* Error occured on frame */
#define START_FRAME_LOST 0x40000000 /* START_FRAME_LOST */
#define END_FRAME_LOST 0x20000000 /* END_FRAME_LOST */
#define RX_ER_NONOCT 0x10000000 /* Rx Non Octet Aligned Packet */
#define RX_ER_BITSTUFF 0x08000000 /* Frame Aborted --Received packet
with bit stuff error */
#define RX_ER_CRC 0x04000000 /* Received packet with CRC error */
#define RX_ER_OVERUN 0x02000000 /* Over-run occured on reception */
#define RX_ER_PID 0x01000000 /* Wrong PID received */
/* Tranmit side */
#define TX_ER_NAK 0x00800000 /* Received NAK handshake */
#define TX_ER_STALL 0x00400000 /* Received STALL handshake */
#define TX_ER_TIMEOUT 0x00200000 /* Transmit time out */
#define TX_ER_UNDERUN 0x00100000 /* Transmit underrun */
#define FRAME_INPROGRESS 0x00080000 /* Frame is being transmitted */
#define ER_DATA_UNDERUN 0x00040000 /* Frame is shorter then expected */
#define ER_DATA_OVERUN 0x00020000 /* Frame is longer then expected */
/* QE USB frame operation functions */
#define frame_get_length(frm) (frm->len)
#define frame_set_length(frm, leng) (frm->len = leng)
#define frame_get_data(frm) (frm->data)
#define frame_set_data(frm, dat) (frm->data = dat)
#define frame_get_info(frm) (frm->info)
#define frame_set_info(frm, inf) (frm->info = inf)
#define frame_get_status(frm) (frm->status)
#define frame_set_status(frm, stat) (frm->status = stat)
#define frame_get_privdata(frm) (frm->privdata)
#define frame_set_privdata(frm, dat) (frm->privdata = dat)
static inline void qe_frame_clean(struct qe_frame *frm)
{
frame_set_data(frm, NULL);
frame_set_length(frm, 0);
frame_set_status(frm, FRAME_OK);
frame_set_info(frm, 0);
frame_set_privdata(frm, NULL);
}
static inline void qe_frame_init(struct qe_frame *frm)
{
qe_frame_clean(frm);
INIT_LIST_HEAD(&(frm->node));
}
struct qe_req {
struct usb_request req;
struct list_head queue;
/* ep_queue() func will add
a request->queue into a udc_ep->queue 'd tail */
struct qe_ep *ep;
unsigned mapped:1;
};
struct qe_ep {
struct usb_ep ep;
struct list_head queue;
struct qe_udc *udc;
const struct usb_endpoint_descriptor *desc;
struct usb_gadget *gadget;
u8 state;
struct qe_bd __iomem *rxbase;
struct qe_bd __iomem *n_rxbd;
struct qe_bd __iomem *e_rxbd;
struct qe_bd __iomem *txbase;
struct qe_bd __iomem *n_txbd;
struct qe_bd __iomem *c_txbd;
struct qe_frame *rxframe;
u8 *rxbuffer;
dma_addr_t rxbuf_d;
u8 rxbufmap;
unsigned char localnack;
int has_data;
struct qe_frame *txframe;
struct qe_req *tx_req;
int sent; /*data already sent */
int last; /*data sent in the last time*/
u8 dir;
u8 epnum;
u8 tm; /* transfer mode */
u8 data01;
u8 init;
u8 already_seen;
u8 enable_tasklet;
u8 setup_stage;
u32 last_io; /* timestamp */
char name[14];
unsigned double_buf:1;
unsigned stopped:1;
unsigned fnf:1;
unsigned has_dma:1;
u8 ackwait;
u8 dma_channel;
u16 dma_counter;
int lch;
struct timer_list timer;
};
struct qe_udc {
struct usb_gadget gadget;
struct usb_gadget_driver *driver;
struct device *dev;
struct qe_ep eps[USB_MAX_ENDPOINTS];
struct usb_ctrlrequest local_setup_buff;
spinlock_t lock; /* lock for set/config qe_udc */
unsigned long soc_type; /* QE or CPM soc */
struct qe_req *status_req; /* ep0 status request */
/* USB and EP Parameter Block pointer */
struct usb_device_para __iomem *usb_param;
struct usb_ep_para __iomem *ep_param[4];
u32 max_pipes; /* Device max pipes */
u32 max_use_endpts; /* Max endpointes to be used */
u32 bus_reset; /* Device is bus reseting */
u32 resume_state; /* USB state to resume*/
u32 usb_state; /* USB current state */
u32 usb_next_state; /* USB next state */
u32 ep0_state; /* Enpoint zero state */
u32 ep0_dir; /* Enpoint zero direction: can be
USB_DIR_IN or USB_DIR_OUT*/
u32 usb_sof_count; /* SOF count */
u32 errors; /* USB ERRORs count */
u8 *tmpbuf;
u32 c_start;
u32 c_end;
u8 *nullbuf;
u8 *statusbuf;
dma_addr_t nullp;
u8 nullmap;
u8 device_address; /* Device USB address */
unsigned int usb_clock;
unsigned int usb_irq;
struct usb_ctlr __iomem *usb_regs;
struct tasklet_struct rx_tasklet;
struct completion *done; /* to make sure release() is done */
};
#define EP_STATE_IDLE 0
#define EP_STATE_NACK 1
#define EP_STATE_STALL 2
/*
* transmit BD's status
*/
#define T_R 0x80000000 /* ready bit */
#define T_W 0x20000000 /* wrap bit */
#define T_I 0x10000000 /* interrupt on completion */
#define T_L 0x08000000 /* last */
#define T_TC 0x04000000 /* transmit CRC */
#define T_CNF 0x02000000 /* wait for transmit confirm */
#define T_LSP 0x01000000 /* Low-speed transaction */
#define T_PID 0x00c00000 /* packet id */
#define T_NAK 0x00100000 /* No ack. */
#define T_STAL 0x00080000 /* Stall recieved */
#define T_TO 0x00040000 /* time out */
#define T_UN 0x00020000 /* underrun */
#define DEVICE_T_ERROR (T_UN | T_TO)
#define HOST_T_ERROR (T_UN | T_TO | T_NAK | T_STAL)
#define DEVICE_T_BD_MASK DEVICE_T_ERROR
#define HOST_T_BD_MASK HOST_T_ERROR
#define T_PID_SHIFT 6
#define T_PID_DATA0 0x00800000 /* Data 0 toggle */
#define T_PID_DATA1 0x00c00000 /* Data 1 toggle */
/*
* receive BD's status
*/
#define R_E 0x80000000 /* buffer empty */
#define R_W 0x20000000 /* wrap bit */
#define R_I 0x10000000 /* interrupt on reception */
#define R_L 0x08000000 /* last */
#define R_F 0x04000000 /* first */
#define R_PID 0x00c00000 /* packet id */
#define R_NO 0x00100000 /* Rx Non Octet Aligned Packet */
#define R_AB 0x00080000 /* Frame Aborted */
#define R_CR 0x00040000 /* CRC Error */
#define R_OV 0x00020000 /* Overrun */
#define R_ERROR (R_NO | R_AB | R_CR | R_OV)
#define R_BD_MASK R_ERROR
#define R_PID_DATA0 0x00000000
#define R_PID_DATA1 0x00400000
#define R_PID_SETUP 0x00800000
#define CPM_USB_STOP_TX 0x2e600000
#define CPM_USB_RESTART_TX 0x2e600000
#define CPM_USB_STOP_TX_OPCODE 0x0a
#define CPM_USB_RESTART_TX_OPCODE 0x0b
#define CPM_USB_EP_SHIFT 5
#ifndef CONFIG_CPM
inline int cpm_command(u32 command, u8 opcode)
{
return -EOPNOTSUPP;
}
#endif
#ifndef CONFIG_QUICC_ENGINE
inline int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol,
u32 cmd_input)
{
return -EOPNOTSUPP;
}
#endif
#endif /* __FSL_QE_UDC_H */
View Git Blame Copy Permalink