e80a9729b1
Rename the omap2_clk_init() in the OMAP2, 3, and 4 clock code to be omap2xxx_clk_init(), omap3xxx_clk_init(), etc. Remove all traces of the (commented) old virt_prcm_set code from omap3xxx_clk_init() and omap4xxx_clk_init(), since this will be handled with the OPP code that is cooking in the PM branch. After this patch, there should be very little else in the clock code that blocks a multi-OMAP 2+3 kernel. (OMAP2420+OMAP2430 still has some outstanding issues that need to be resolved; this is pending on some additions to the hwmod data.) Signed-off-by: Paul Walmsley <paul@pwsan.com>
115 lines
4.2 KiB
C
115 lines
4.2 KiB
C
/*
|
|
* linux/arch/arm/mach-omap2/clock.h
|
|
*
|
|
* Copyright (C) 2005-2009 Texas Instruments, Inc.
|
|
* Copyright (C) 2004-2009 Nokia Corporation
|
|
*
|
|
* Contacts:
|
|
* Richard Woodruff <r-woodruff2@ti.com>
|
|
* Paul Walmsley
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK_H
|
|
#define __ARCH_ARM_MACH_OMAP2_CLOCK_H
|
|
|
|
#include <plat/clock.h>
|
|
|
|
/* The maximum error between a target DPLL rate and the rounded rate in Hz */
|
|
#define DEFAULT_DPLL_RATE_TOLERANCE 50000
|
|
|
|
/* CM_CLKSEL2_PLL.CORE_CLK_SRC bits (2XXX) */
|
|
#define CORE_CLK_SRC_32K 0x0
|
|
#define CORE_CLK_SRC_DPLL 0x1
|
|
#define CORE_CLK_SRC_DPLL_X2 0x2
|
|
|
|
/* OMAP2xxx CM_CLKEN_PLL.EN_DPLL bits - for omap2_get_dpll_rate() */
|
|
#define OMAP2XXX_EN_DPLL_LPBYPASS 0x1
|
|
#define OMAP2XXX_EN_DPLL_FRBYPASS 0x2
|
|
#define OMAP2XXX_EN_DPLL_LOCKED 0x3
|
|
|
|
/* OMAP3xxx CM_CLKEN_PLL*.EN_*_DPLL bits - for omap2_get_dpll_rate() */
|
|
#define OMAP3XXX_EN_DPLL_LPBYPASS 0x5
|
|
#define OMAP3XXX_EN_DPLL_FRBYPASS 0x6
|
|
#define OMAP3XXX_EN_DPLL_LOCKED 0x7
|
|
|
|
/* OMAP4xxx CM_CLKMODE_DPLL*.EN_*_DPLL bits - for omap2_get_dpll_rate() */
|
|
#define OMAP4XXX_EN_DPLL_MNBYPASS 0x4
|
|
#define OMAP4XXX_EN_DPLL_LPBYPASS 0x5
|
|
#define OMAP4XXX_EN_DPLL_FRBYPASS 0x6
|
|
#define OMAP4XXX_EN_DPLL_LOCKED 0x7
|
|
|
|
/* CM_CLKEN_PLL*.EN* bit values - not all are available for every DPLL */
|
|
#define DPLL_LOW_POWER_STOP 0x1
|
|
#define DPLL_LOW_POWER_BYPASS 0x5
|
|
#define DPLL_LOCKED 0x7
|
|
|
|
int omap2_clk_enable(struct clk *clk);
|
|
void omap2_clk_disable(struct clk *clk);
|
|
long omap2_clk_round_rate(struct clk *clk, unsigned long rate);
|
|
int omap2_clk_set_rate(struct clk *clk, unsigned long rate);
|
|
int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent);
|
|
int omap2_dpll_set_rate_tolerance(struct clk *clk, unsigned int tolerance);
|
|
long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate);
|
|
unsigned long omap3_dpll_recalc(struct clk *clk);
|
|
unsigned long omap3_clkoutx2_recalc(struct clk *clk);
|
|
void omap3_dpll_allow_idle(struct clk *clk);
|
|
void omap3_dpll_deny_idle(struct clk *clk);
|
|
u32 omap3_dpll_autoidle_read(struct clk *clk);
|
|
int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate);
|
|
int omap3_noncore_dpll_enable(struct clk *clk);
|
|
void omap3_noncore_dpll_disable(struct clk *clk);
|
|
|
|
#ifdef CONFIG_OMAP_RESET_CLOCKS
|
|
void omap2_clk_disable_unused(struct clk *clk);
|
|
#else
|
|
#define omap2_clk_disable_unused NULL
|
|
#endif
|
|
|
|
unsigned long omap2_clksel_recalc(struct clk *clk);
|
|
void omap2_init_clk_clkdm(struct clk *clk);
|
|
void omap2_init_clksel_parent(struct clk *clk);
|
|
u32 omap2_clksel_get_divisor(struct clk *clk);
|
|
u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,
|
|
u32 *new_div);
|
|
u32 omap2_clksel_to_divisor(struct clk *clk, u32 field_val);
|
|
u32 omap2_divisor_to_clksel(struct clk *clk, u32 div);
|
|
long omap2_clksel_round_rate(struct clk *clk, unsigned long target_rate);
|
|
int omap2_clksel_set_rate(struct clk *clk, unsigned long rate);
|
|
int omap2_clksel_set_parent(struct clk *clk, struct clk *new_parent);
|
|
u32 omap2_get_dpll_rate(struct clk *clk);
|
|
void omap2_init_dpll_parent(struct clk *clk);
|
|
int omap2_wait_clock_ready(void __iomem *reg, u32 cval, const char *name);
|
|
int omap2_dflt_clk_enable(struct clk *clk);
|
|
void omap2_dflt_clk_disable(struct clk *clk);
|
|
void omap2_clk_dflt_find_companion(struct clk *clk, void __iomem **other_reg,
|
|
u8 *other_bit);
|
|
void omap2_clk_dflt_find_idlest(struct clk *clk, void __iomem **idlest_reg,
|
|
u8 *idlest_bit);
|
|
void omap2xxx_clk_commit(struct clk *clk);
|
|
|
|
extern u8 cpu_mask;
|
|
|
|
extern const struct clkops clkops_omap2_dflt_wait;
|
|
extern const struct clkops clkops_omap2_dflt;
|
|
|
|
extern struct clk_functions omap2_clk_functions;
|
|
extern struct clk *vclk, *sclk;
|
|
|
|
extern const struct clksel_rate gpt_32k_rates[];
|
|
extern const struct clksel_rate gpt_sys_rates[];
|
|
extern const struct clksel_rate gfx_l3_rates[];
|
|
|
|
#if defined(CONFIG_ARCH_OMAP24XX) && defined(CONFIG_CPU_FREQ)
|
|
extern void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table);
|
|
extern void omap2_clk_exit_cpufreq_table(struct cpufreq_frequency_table **table);
|
|
#else
|
|
#define omap2_clk_init_cpufreq_table 0
|
|
#define omap2_clk_exit_cpufreq_table 0
|
|
#endif
|
|
|
|
#endif
|