95006188cb
This patch adds ATAPI support to the sata_promise driver. This has been tested on both first- and second-generation chips (20378 and 20575), and with both SATAPI and PATAPI devices. CD-writing works. SATAPI DMA works on second-generation chips, but on first-generation chips SATAPI is limited to PIO due to what appears to be HW limitations. PATAPI DMA works on both first- and second-generation chips, but requires the separate PATA support patch before it can be used on TX2plus chips. The functional changes to the driver are: - remove ATA_FLAG_NO_ATAPI from PDC_COMMON_FLAGS - add ->check_atapi_dma() operation to enable DMA for bulk data transfers but force PIO for other ATAPI commands; this filter is from Promise's driver and largely matches pata_pdc207x.c - use a more restrictive ->check_atapi_dma() on first-generation chips to force SATAPI to always use PIO - add handling of ATAPI protocols to pdc_qc_prep(), pdc_host_intr(), and pdc_qc_issue_prot(): ATAPI_DMA is handled by the driver while non-DMA protocols are handed over to libata generic code - add pdc_issue_atapi_pkt_cmd() to handle the initial steps in issuing ATAPI DMA commands before sending the actual CDB; this procedure was ported from Promise's driver Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Jeff Garzik <jeff@garzik.org>
1108 lines
28 KiB
C
1108 lines
28 KiB
C
/*
|
|
* sata_promise.c - Promise SATA
|
|
*
|
|
* Maintained by: Jeff Garzik <jgarzik@pobox.com>
|
|
* Please ALWAYS copy linux-ide@vger.kernel.org
|
|
* on emails.
|
|
*
|
|
* Copyright 2003-2004 Red Hat, Inc.
|
|
*
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2, or (at your option)
|
|
* any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; see the file COPYING. If not, write to
|
|
* the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*
|
|
*
|
|
* libata documentation is available via 'make {ps|pdf}docs',
|
|
* as Documentation/DocBook/libata.*
|
|
*
|
|
* Hardware information only available under NDA.
|
|
*
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/init.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/device.h>
|
|
#include <scsi/scsi.h>
|
|
#include <scsi/scsi_host.h>
|
|
#include <scsi/scsi_cmnd.h>
|
|
#include <linux/libata.h>
|
|
#include <asm/io.h>
|
|
#include "sata_promise.h"
|
|
|
|
#define DRV_NAME "sata_promise"
|
|
#define DRV_VERSION "1.05"
|
|
|
|
|
|
enum {
|
|
/* register offsets */
|
|
PDC_FEATURE = 0x04, /* Feature/Error reg (per port) */
|
|
PDC_SECTOR_COUNT = 0x08, /* Sector count reg (per port) */
|
|
PDC_SECTOR_NUMBER = 0x0C, /* Sector number reg (per port) */
|
|
PDC_CYLINDER_LOW = 0x10, /* Cylinder low reg (per port) */
|
|
PDC_CYLINDER_HIGH = 0x14, /* Cylinder high reg (per port) */
|
|
PDC_DEVICE = 0x18, /* Device/Head reg (per port) */
|
|
PDC_COMMAND = 0x1C, /* Command/status reg (per port) */
|
|
PDC_PKT_SUBMIT = 0x40, /* Command packet pointer addr */
|
|
PDC_INT_SEQMASK = 0x40, /* Mask of asserted SEQ INTs */
|
|
PDC_FLASH_CTL = 0x44, /* Flash control register */
|
|
PDC_GLOBAL_CTL = 0x48, /* Global control/status (per port) */
|
|
PDC_CTLSTAT = 0x60, /* IDE control and status (per port) */
|
|
PDC_SATA_PLUG_CSR = 0x6C, /* SATA Plug control/status reg */
|
|
PDC2_SATA_PLUG_CSR = 0x60, /* SATAII Plug control/status reg */
|
|
PDC_TBG_MODE = 0x41C, /* TBG mode (not SATAII) */
|
|
PDC_SLEW_CTL = 0x470, /* slew rate control reg (not SATAII) */
|
|
|
|
PDC_ERR_MASK = (1<<19) | (1<<20) | (1<<21) | (1<<22) |
|
|
(1<<8) | (1<<9) | (1<<10),
|
|
|
|
board_2037x = 0, /* FastTrak S150 TX2plus */
|
|
board_20319 = 1, /* FastTrak S150 TX4 */
|
|
board_20619 = 2, /* FastTrak TX4000 */
|
|
board_2057x = 3, /* SATAII150 Tx2plus */
|
|
board_40518 = 4, /* SATAII150 Tx4 */
|
|
|
|
PDC_HAS_PATA = (1 << 1), /* PDC20375/20575 has PATA */
|
|
|
|
/* Sequence counter control registers bit definitions */
|
|
PDC_SEQCNTRL_INT_MASK = (1 << 5), /* Sequence Interrupt Mask */
|
|
|
|
/* Feature register values */
|
|
PDC_FEATURE_ATAPI_PIO = 0x00, /* ATAPI data xfer by PIO */
|
|
PDC_FEATURE_ATAPI_DMA = 0x01, /* ATAPI data xfer by DMA */
|
|
|
|
/* Device/Head register values */
|
|
PDC_DEVICE_SATA = 0xE0, /* Device/Head value for SATA devices */
|
|
|
|
/* PDC_CTLSTAT bit definitions */
|
|
PDC_DMA_ENABLE = (1 << 7),
|
|
PDC_IRQ_DISABLE = (1 << 10),
|
|
PDC_RESET = (1 << 11), /* HDMA reset */
|
|
|
|
PDC_COMMON_FLAGS = ATA_FLAG_NO_LEGACY |
|
|
ATA_FLAG_MMIO |
|
|
ATA_FLAG_PIO_POLLING,
|
|
|
|
/* hp->flags bits */
|
|
PDC_FLAG_GEN_II = (1 << 0),
|
|
};
|
|
|
|
|
|
struct pdc_port_priv {
|
|
u8 *pkt;
|
|
dma_addr_t pkt_dma;
|
|
};
|
|
|
|
struct pdc_host_priv {
|
|
unsigned long flags;
|
|
unsigned long port_flags[ATA_MAX_PORTS];
|
|
};
|
|
|
|
static u32 pdc_sata_scr_read (struct ata_port *ap, unsigned int sc_reg);
|
|
static void pdc_sata_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
|
|
static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
|
|
static irqreturn_t pdc_interrupt (int irq, void *dev_instance);
|
|
static void pdc_eng_timeout(struct ata_port *ap);
|
|
static int pdc_port_start(struct ata_port *ap);
|
|
static void pdc_port_stop(struct ata_port *ap);
|
|
static void pdc_pata_phy_reset(struct ata_port *ap);
|
|
static void pdc_qc_prep(struct ata_queued_cmd *qc);
|
|
static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf);
|
|
static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf);
|
|
static int pdc_check_atapi_dma(struct ata_queued_cmd *qc);
|
|
static int pdc_old_check_atapi_dma(struct ata_queued_cmd *qc);
|
|
static void pdc_irq_clear(struct ata_port *ap);
|
|
static unsigned int pdc_qc_issue_prot(struct ata_queued_cmd *qc);
|
|
static void pdc_host_stop(struct ata_host *host);
|
|
static void pdc_freeze(struct ata_port *ap);
|
|
static void pdc_thaw(struct ata_port *ap);
|
|
static void pdc_error_handler(struct ata_port *ap);
|
|
static void pdc_post_internal_cmd(struct ata_queued_cmd *qc);
|
|
|
|
|
|
static struct scsi_host_template pdc_ata_sht = {
|
|
.module = THIS_MODULE,
|
|
.name = DRV_NAME,
|
|
.ioctl = ata_scsi_ioctl,
|
|
.queuecommand = ata_scsi_queuecmd,
|
|
.can_queue = ATA_DEF_QUEUE,
|
|
.this_id = ATA_SHT_THIS_ID,
|
|
.sg_tablesize = LIBATA_MAX_PRD,
|
|
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
|
|
.emulated = ATA_SHT_EMULATED,
|
|
.use_clustering = ATA_SHT_USE_CLUSTERING,
|
|
.proc_name = DRV_NAME,
|
|
.dma_boundary = ATA_DMA_BOUNDARY,
|
|
.slave_configure = ata_scsi_slave_config,
|
|
.slave_destroy = ata_scsi_slave_destroy,
|
|
.bios_param = ata_std_bios_param,
|
|
};
|
|
|
|
static const struct ata_port_operations pdc_sata_ops = {
|
|
.port_disable = ata_port_disable,
|
|
.tf_load = pdc_tf_load_mmio,
|
|
.tf_read = ata_tf_read,
|
|
.check_status = ata_check_status,
|
|
.exec_command = pdc_exec_command_mmio,
|
|
.dev_select = ata_std_dev_select,
|
|
.check_atapi_dma = pdc_check_atapi_dma,
|
|
|
|
.qc_prep = pdc_qc_prep,
|
|
.qc_issue = pdc_qc_issue_prot,
|
|
.freeze = pdc_freeze,
|
|
.thaw = pdc_thaw,
|
|
.error_handler = pdc_error_handler,
|
|
.post_internal_cmd = pdc_post_internal_cmd,
|
|
.data_xfer = ata_mmio_data_xfer,
|
|
.irq_handler = pdc_interrupt,
|
|
.irq_clear = pdc_irq_clear,
|
|
|
|
.scr_read = pdc_sata_scr_read,
|
|
.scr_write = pdc_sata_scr_write,
|
|
.port_start = pdc_port_start,
|
|
.port_stop = pdc_port_stop,
|
|
.host_stop = pdc_host_stop,
|
|
};
|
|
|
|
/* First-generation chips need a more restrictive ->check_atapi_dma op */
|
|
static const struct ata_port_operations pdc_old_sata_ops = {
|
|
.port_disable = ata_port_disable,
|
|
.tf_load = pdc_tf_load_mmio,
|
|
.tf_read = ata_tf_read,
|
|
.check_status = ata_check_status,
|
|
.exec_command = pdc_exec_command_mmio,
|
|
.dev_select = ata_std_dev_select,
|
|
.check_atapi_dma = pdc_old_check_atapi_dma,
|
|
|
|
.qc_prep = pdc_qc_prep,
|
|
.qc_issue = pdc_qc_issue_prot,
|
|
.freeze = pdc_freeze,
|
|
.thaw = pdc_thaw,
|
|
.error_handler = pdc_error_handler,
|
|
.post_internal_cmd = pdc_post_internal_cmd,
|
|
.data_xfer = ata_mmio_data_xfer,
|
|
.irq_handler = pdc_interrupt,
|
|
.irq_clear = pdc_irq_clear,
|
|
|
|
.scr_read = pdc_sata_scr_read,
|
|
.scr_write = pdc_sata_scr_write,
|
|
.port_start = pdc_port_start,
|
|
.port_stop = pdc_port_stop,
|
|
.host_stop = pdc_host_stop,
|
|
};
|
|
|
|
static const struct ata_port_operations pdc_pata_ops = {
|
|
.port_disable = ata_port_disable,
|
|
.tf_load = pdc_tf_load_mmio,
|
|
.tf_read = ata_tf_read,
|
|
.check_status = ata_check_status,
|
|
.exec_command = pdc_exec_command_mmio,
|
|
.dev_select = ata_std_dev_select,
|
|
.check_atapi_dma = pdc_check_atapi_dma,
|
|
|
|
.phy_reset = pdc_pata_phy_reset,
|
|
|
|
.qc_prep = pdc_qc_prep,
|
|
.qc_issue = pdc_qc_issue_prot,
|
|
.data_xfer = ata_mmio_data_xfer,
|
|
.eng_timeout = pdc_eng_timeout,
|
|
.irq_handler = pdc_interrupt,
|
|
.irq_clear = pdc_irq_clear,
|
|
|
|
.port_start = pdc_port_start,
|
|
.port_stop = pdc_port_stop,
|
|
.host_stop = pdc_host_stop,
|
|
};
|
|
|
|
static const struct ata_port_info pdc_port_info[] = {
|
|
/* board_2037x */
|
|
{
|
|
.sht = &pdc_ata_sht,
|
|
.flags = PDC_COMMON_FLAGS,
|
|
.pio_mask = 0x1f, /* pio0-4 */
|
|
.mwdma_mask = 0x07, /* mwdma0-2 */
|
|
.udma_mask = 0x7f, /* udma0-6 ; FIXME */
|
|
.port_ops = &pdc_old_sata_ops,
|
|
},
|
|
|
|
/* board_20319 */
|
|
{
|
|
.sht = &pdc_ata_sht,
|
|
.flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA,
|
|
.pio_mask = 0x1f, /* pio0-4 */
|
|
.mwdma_mask = 0x07, /* mwdma0-2 */
|
|
.udma_mask = 0x7f, /* udma0-6 ; FIXME */
|
|
.port_ops = &pdc_old_sata_ops,
|
|
},
|
|
|
|
/* board_20619 */
|
|
{
|
|
.sht = &pdc_ata_sht,
|
|
.flags = PDC_COMMON_FLAGS | ATA_FLAG_SRST | ATA_FLAG_SLAVE_POSS,
|
|
.pio_mask = 0x1f, /* pio0-4 */
|
|
.mwdma_mask = 0x07, /* mwdma0-2 */
|
|
.udma_mask = 0x7f, /* udma0-6 ; FIXME */
|
|
.port_ops = &pdc_pata_ops,
|
|
},
|
|
|
|
/* board_2057x */
|
|
{
|
|
.sht = &pdc_ata_sht,
|
|
.flags = PDC_COMMON_FLAGS,
|
|
.pio_mask = 0x1f, /* pio0-4 */
|
|
.mwdma_mask = 0x07, /* mwdma0-2 */
|
|
.udma_mask = 0x7f, /* udma0-6 ; FIXME */
|
|
.port_ops = &pdc_sata_ops,
|
|
},
|
|
|
|
/* board_40518 */
|
|
{
|
|
.sht = &pdc_ata_sht,
|
|
.flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA,
|
|
.pio_mask = 0x1f, /* pio0-4 */
|
|
.mwdma_mask = 0x07, /* mwdma0-2 */
|
|
.udma_mask = 0x7f, /* udma0-6 ; FIXME */
|
|
.port_ops = &pdc_sata_ops,
|
|
},
|
|
};
|
|
|
|
static const struct pci_device_id pdc_ata_pci_tbl[] = {
|
|
{ PCI_VDEVICE(PROMISE, 0x3371), board_2037x },
|
|
{ PCI_VDEVICE(PROMISE, 0x3373), board_2037x },
|
|
{ PCI_VDEVICE(PROMISE, 0x3375), board_2037x },
|
|
{ PCI_VDEVICE(PROMISE, 0x3376), board_2037x },
|
|
{ PCI_VDEVICE(PROMISE, 0x3570), board_2057x },
|
|
{ PCI_VDEVICE(PROMISE, 0x3571), board_2057x },
|
|
{ PCI_VDEVICE(PROMISE, 0x3574), board_2057x },
|
|
{ PCI_VDEVICE(PROMISE, 0x3577), board_2057x },
|
|
{ PCI_VDEVICE(PROMISE, 0x3d73), board_2057x },
|
|
{ PCI_VDEVICE(PROMISE, 0x3d75), board_2057x },
|
|
|
|
{ PCI_VDEVICE(PROMISE, 0x3318), board_20319 },
|
|
{ PCI_VDEVICE(PROMISE, 0x3319), board_20319 },
|
|
{ PCI_VDEVICE(PROMISE, 0x3515), board_20319 },
|
|
{ PCI_VDEVICE(PROMISE, 0x3519), board_20319 },
|
|
{ PCI_VDEVICE(PROMISE, 0x3d17), board_40518 },
|
|
{ PCI_VDEVICE(PROMISE, 0x3d18), board_40518 },
|
|
|
|
{ PCI_VDEVICE(PROMISE, 0x6629), board_20619 },
|
|
|
|
{ } /* terminate list */
|
|
};
|
|
|
|
|
|
static struct pci_driver pdc_ata_pci_driver = {
|
|
.name = DRV_NAME,
|
|
.id_table = pdc_ata_pci_tbl,
|
|
.probe = pdc_ata_init_one,
|
|
.remove = ata_pci_remove_one,
|
|
};
|
|
|
|
|
|
static int pdc_port_start(struct ata_port *ap)
|
|
{
|
|
struct device *dev = ap->host->dev;
|
|
struct pdc_host_priv *hp = ap->host->private_data;
|
|
struct pdc_port_priv *pp;
|
|
int rc;
|
|
|
|
/* fix up port flags and cable type for SATA+PATA chips */
|
|
ap->flags |= hp->port_flags[ap->port_no];
|
|
if (ap->flags & ATA_FLAG_SATA)
|
|
ap->cbl = ATA_CBL_SATA;
|
|
|
|
rc = ata_port_start(ap);
|
|
if (rc)
|
|
return rc;
|
|
|
|
pp = kzalloc(sizeof(*pp), GFP_KERNEL);
|
|
if (!pp) {
|
|
rc = -ENOMEM;
|
|
goto err_out;
|
|
}
|
|
|
|
pp->pkt = dma_alloc_coherent(dev, 128, &pp->pkt_dma, GFP_KERNEL);
|
|
if (!pp->pkt) {
|
|
rc = -ENOMEM;
|
|
goto err_out_kfree;
|
|
}
|
|
|
|
ap->private_data = pp;
|
|
|
|
/* fix up PHYMODE4 align timing */
|
|
if ((hp->flags & PDC_FLAG_GEN_II) && sata_scr_valid(ap)) {
|
|
void __iomem *mmio = (void __iomem *) ap->ioaddr.scr_addr;
|
|
unsigned int tmp;
|
|
|
|
tmp = readl(mmio + 0x014);
|
|
tmp = (tmp & ~3) | 1; /* set bits 1:0 = 0:1 */
|
|
writel(tmp, mmio + 0x014);
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_out_kfree:
|
|
kfree(pp);
|
|
err_out:
|
|
ata_port_stop(ap);
|
|
return rc;
|
|
}
|
|
|
|
|
|
static void pdc_port_stop(struct ata_port *ap)
|
|
{
|
|
struct device *dev = ap->host->dev;
|
|
struct pdc_port_priv *pp = ap->private_data;
|
|
|
|
ap->private_data = NULL;
|
|
dma_free_coherent(dev, 128, pp->pkt, pp->pkt_dma);
|
|
kfree(pp);
|
|
ata_port_stop(ap);
|
|
}
|
|
|
|
|
|
static void pdc_host_stop(struct ata_host *host)
|
|
{
|
|
struct pdc_host_priv *hp = host->private_data;
|
|
|
|
ata_pci_host_stop(host);
|
|
|
|
kfree(hp);
|
|
}
|
|
|
|
|
|
static void pdc_reset_port(struct ata_port *ap)
|
|
{
|
|
void __iomem *mmio = (void __iomem *) ap->ioaddr.cmd_addr + PDC_CTLSTAT;
|
|
unsigned int i;
|
|
u32 tmp;
|
|
|
|
for (i = 11; i > 0; i--) {
|
|
tmp = readl(mmio);
|
|
if (tmp & PDC_RESET)
|
|
break;
|
|
|
|
udelay(100);
|
|
|
|
tmp |= PDC_RESET;
|
|
writel(tmp, mmio);
|
|
}
|
|
|
|
tmp &= ~PDC_RESET;
|
|
writel(tmp, mmio);
|
|
readl(mmio); /* flush */
|
|
}
|
|
|
|
static void pdc_pata_cbl_detect(struct ata_port *ap)
|
|
{
|
|
u8 tmp;
|
|
void __iomem *mmio = (void __iomem *) ap->ioaddr.cmd_addr + PDC_CTLSTAT + 0x03;
|
|
|
|
tmp = readb(mmio);
|
|
|
|
if (tmp & 0x01) {
|
|
ap->cbl = ATA_CBL_PATA40;
|
|
ap->udma_mask &= ATA_UDMA_MASK_40C;
|
|
} else
|
|
ap->cbl = ATA_CBL_PATA80;
|
|
}
|
|
|
|
static void pdc_pata_phy_reset(struct ata_port *ap)
|
|
{
|
|
pdc_pata_cbl_detect(ap);
|
|
pdc_reset_port(ap);
|
|
ata_port_probe(ap);
|
|
ata_bus_reset(ap);
|
|
}
|
|
|
|
static u32 pdc_sata_scr_read (struct ata_port *ap, unsigned int sc_reg)
|
|
{
|
|
if (sc_reg > SCR_CONTROL || ap->cbl != ATA_CBL_SATA)
|
|
return 0xffffffffU;
|
|
return readl((void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4));
|
|
}
|
|
|
|
|
|
static void pdc_sata_scr_write (struct ata_port *ap, unsigned int sc_reg,
|
|
u32 val)
|
|
{
|
|
if (sc_reg > SCR_CONTROL || ap->cbl != ATA_CBL_SATA)
|
|
return;
|
|
writel(val, (void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4));
|
|
}
|
|
|
|
static void pdc_atapi_dma_pkt(struct ata_taskfile *tf,
|
|
dma_addr_t sg_table,
|
|
unsigned int cdb_len, u8 *cdb,
|
|
u8 *buf)
|
|
{
|
|
u32 *buf32 = (u32 *) buf;
|
|
|
|
/* set control bits (byte 0), zero delay seq id (byte 3),
|
|
* and seq id (byte 2)
|
|
*/
|
|
if (!(tf->flags & ATA_TFLAG_WRITE))
|
|
buf32[0] = cpu_to_le32(PDC_PKT_READ);
|
|
else
|
|
buf32[0] = 0;
|
|
buf32[1] = cpu_to_le32(sg_table); /* S/G table addr */
|
|
buf32[2] = 0; /* no next-packet */
|
|
|
|
/* we can represent cdb lengths 2/4/6/8/10/12/14/16 */
|
|
BUG_ON(cdb_len & ~0x1E);
|
|
|
|
buf[12] = (((cdb_len >> 1) & 7) << 5) | ATA_REG_DATA | PDC_LAST_REG;
|
|
memcpy(buf+13, cdb, cdb_len);
|
|
}
|
|
|
|
static void pdc_qc_prep(struct ata_queued_cmd *qc)
|
|
{
|
|
struct pdc_port_priv *pp = qc->ap->private_data;
|
|
unsigned int i;
|
|
|
|
VPRINTK("ENTER\n");
|
|
|
|
switch (qc->tf.protocol) {
|
|
case ATA_PROT_DMA:
|
|
ata_qc_prep(qc);
|
|
/* fall through */
|
|
|
|
case ATA_PROT_NODATA:
|
|
i = pdc_pkt_header(&qc->tf, qc->ap->prd_dma,
|
|
qc->dev->devno, pp->pkt);
|
|
|
|
if (qc->tf.flags & ATA_TFLAG_LBA48)
|
|
i = pdc_prep_lba48(&qc->tf, pp->pkt, i);
|
|
else
|
|
i = pdc_prep_lba28(&qc->tf, pp->pkt, i);
|
|
|
|
pdc_pkt_footer(&qc->tf, pp->pkt, i);
|
|
break;
|
|
|
|
case ATA_PROT_ATAPI:
|
|
case ATA_PROT_ATAPI_NODATA:
|
|
ata_qc_prep(qc);
|
|
break;
|
|
|
|
case ATA_PROT_ATAPI_DMA:
|
|
ata_qc_prep(qc);
|
|
pdc_atapi_dma_pkt(&qc->tf, qc->ap->prd_dma, qc->dev->cdb_len, qc->cdb, pp->pkt);
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void pdc_freeze(struct ata_port *ap)
|
|
{
|
|
void __iomem *mmio = (void __iomem *) ap->ioaddr.cmd_addr;
|
|
u32 tmp;
|
|
|
|
tmp = readl(mmio + PDC_CTLSTAT);
|
|
tmp |= PDC_IRQ_DISABLE;
|
|
tmp &= ~PDC_DMA_ENABLE;
|
|
writel(tmp, mmio + PDC_CTLSTAT);
|
|
readl(mmio + PDC_CTLSTAT); /* flush */
|
|
}
|
|
|
|
static void pdc_thaw(struct ata_port *ap)
|
|
{
|
|
void __iomem *mmio = (void __iomem *) ap->ioaddr.cmd_addr;
|
|
u32 tmp;
|
|
|
|
/* clear IRQ */
|
|
readl(mmio + PDC_INT_SEQMASK);
|
|
|
|
/* turn IRQ back on */
|
|
tmp = readl(mmio + PDC_CTLSTAT);
|
|
tmp &= ~PDC_IRQ_DISABLE;
|
|
writel(tmp, mmio + PDC_CTLSTAT);
|
|
readl(mmio + PDC_CTLSTAT); /* flush */
|
|
}
|
|
|
|
static void pdc_error_handler(struct ata_port *ap)
|
|
{
|
|
ata_reset_fn_t hardreset;
|
|
|
|
if (!(ap->pflags & ATA_PFLAG_FROZEN))
|
|
pdc_reset_port(ap);
|
|
|
|
hardreset = NULL;
|
|
if (sata_scr_valid(ap))
|
|
hardreset = sata_std_hardreset;
|
|
|
|
/* perform recovery */
|
|
ata_do_eh(ap, ata_std_prereset, ata_std_softreset, hardreset,
|
|
ata_std_postreset);
|
|
}
|
|
|
|
static void pdc_post_internal_cmd(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
|
|
if (qc->flags & ATA_QCFLAG_FAILED)
|
|
qc->err_mask |= AC_ERR_OTHER;
|
|
|
|
/* make DMA engine forget about the failed command */
|
|
if (qc->err_mask)
|
|
pdc_reset_port(ap);
|
|
}
|
|
|
|
static void pdc_eng_timeout(struct ata_port *ap)
|
|
{
|
|
struct ata_host *host = ap->host;
|
|
u8 drv_stat;
|
|
struct ata_queued_cmd *qc;
|
|
unsigned long flags;
|
|
|
|
DPRINTK("ENTER\n");
|
|
|
|
spin_lock_irqsave(&host->lock, flags);
|
|
|
|
qc = ata_qc_from_tag(ap, ap->active_tag);
|
|
|
|
switch (qc->tf.protocol) {
|
|
case ATA_PROT_DMA:
|
|
case ATA_PROT_NODATA:
|
|
ata_port_printk(ap, KERN_ERR, "command timeout\n");
|
|
drv_stat = ata_wait_idle(ap);
|
|
qc->err_mask |= __ac_err_mask(drv_stat);
|
|
break;
|
|
|
|
default:
|
|
drv_stat = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000);
|
|
|
|
ata_port_printk(ap, KERN_ERR,
|
|
"unknown timeout, cmd 0x%x stat 0x%x\n",
|
|
qc->tf.command, drv_stat);
|
|
|
|
qc->err_mask |= ac_err_mask(drv_stat);
|
|
break;
|
|
}
|
|
|
|
spin_unlock_irqrestore(&host->lock, flags);
|
|
ata_eh_qc_complete(qc);
|
|
DPRINTK("EXIT\n");
|
|
}
|
|
|
|
static inline unsigned int pdc_host_intr( struct ata_port *ap,
|
|
struct ata_queued_cmd *qc)
|
|
{
|
|
unsigned int handled = 0;
|
|
u32 tmp;
|
|
void __iomem *mmio = (void __iomem *) ap->ioaddr.cmd_addr + PDC_GLOBAL_CTL;
|
|
|
|
tmp = readl(mmio);
|
|
if (tmp & PDC_ERR_MASK) {
|
|
qc->err_mask |= AC_ERR_DEV;
|
|
pdc_reset_port(ap);
|
|
}
|
|
|
|
switch (qc->tf.protocol) {
|
|
case ATA_PROT_DMA:
|
|
case ATA_PROT_NODATA:
|
|
case ATA_PROT_ATAPI_DMA:
|
|
qc->err_mask |= ac_err_mask(ata_wait_idle(ap));
|
|
ata_qc_complete(qc);
|
|
handled = 1;
|
|
break;
|
|
|
|
default:
|
|
ap->stats.idle_irq++;
|
|
break;
|
|
}
|
|
|
|
return handled;
|
|
}
|
|
|
|
static void pdc_irq_clear(struct ata_port *ap)
|
|
{
|
|
struct ata_host *host = ap->host;
|
|
void __iomem *mmio = host->mmio_base;
|
|
|
|
readl(mmio + PDC_INT_SEQMASK);
|
|
}
|
|
|
|
static irqreturn_t pdc_interrupt (int irq, void *dev_instance)
|
|
{
|
|
struct ata_host *host = dev_instance;
|
|
struct ata_port *ap;
|
|
u32 mask = 0;
|
|
unsigned int i, tmp;
|
|
unsigned int handled = 0;
|
|
void __iomem *mmio_base;
|
|
|
|
VPRINTK("ENTER\n");
|
|
|
|
if (!host || !host->mmio_base) {
|
|
VPRINTK("QUICK EXIT\n");
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
mmio_base = host->mmio_base;
|
|
|
|
/* reading should also clear interrupts */
|
|
mask = readl(mmio_base + PDC_INT_SEQMASK);
|
|
|
|
if (mask == 0xffffffff) {
|
|
VPRINTK("QUICK EXIT 2\n");
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
spin_lock(&host->lock);
|
|
|
|
mask &= 0xffff; /* only 16 tags possible */
|
|
if (!mask) {
|
|
VPRINTK("QUICK EXIT 3\n");
|
|
goto done_irq;
|
|
}
|
|
|
|
writel(mask, mmio_base + PDC_INT_SEQMASK);
|
|
|
|
for (i = 0; i < host->n_ports; i++) {
|
|
VPRINTK("port %u\n", i);
|
|
ap = host->ports[i];
|
|
tmp = mask & (1 << (i + 1));
|
|
if (tmp && ap &&
|
|
!(ap->flags & ATA_FLAG_DISABLED)) {
|
|
struct ata_queued_cmd *qc;
|
|
|
|
qc = ata_qc_from_tag(ap, ap->active_tag);
|
|
if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING)))
|
|
handled += pdc_host_intr(ap, qc);
|
|
}
|
|
}
|
|
|
|
VPRINTK("EXIT\n");
|
|
|
|
done_irq:
|
|
spin_unlock(&host->lock);
|
|
return IRQ_RETVAL(handled);
|
|
}
|
|
|
|
static inline void pdc_packet_start(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
struct pdc_port_priv *pp = ap->private_data;
|
|
unsigned int port_no = ap->port_no;
|
|
u8 seq = (u8) (port_no + 1);
|
|
|
|
VPRINTK("ENTER, ap %p\n", ap);
|
|
|
|
writel(0x00000001, ap->host->mmio_base + (seq * 4));
|
|
readl(ap->host->mmio_base + (seq * 4)); /* flush */
|
|
|
|
pp->pkt[2] = seq;
|
|
wmb(); /* flush PRD, pkt writes */
|
|
writel(pp->pkt_dma, (void __iomem *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT);
|
|
readl((void __iomem *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); /* flush */
|
|
}
|
|
|
|
static unsigned int pdc_wait_for_drq(struct ata_port *ap)
|
|
{
|
|
void __iomem *port_mmio = (void __iomem *) ap->ioaddr.cmd_addr;
|
|
unsigned int i;
|
|
unsigned int status;
|
|
|
|
/* Following pdc-ultra's WaitForDrq() we loop here until BSY
|
|
* is clear and DRQ is set in altstatus. We could possibly call
|
|
* ata_busy_wait() and loop until DRQ is set, but since we don't
|
|
* know how much time a call to ata_busy_wait() took, we don't
|
|
* know when to time out the outer loop.
|
|
*/
|
|
for(i = 0; i < 1000; ++i) {
|
|
status = readb(port_mmio + 0x38); /* altstatus */
|
|
if (status == 0xFF)
|
|
break;
|
|
if (status & ATA_BUSY)
|
|
;
|
|
else if (status & (ATA_DRQ | ATA_ERR))
|
|
break;
|
|
mdelay(1);
|
|
}
|
|
if (i >= 1000)
|
|
ata_port_printk(ap, KERN_WARNING, "%s timed out", __FUNCTION__);
|
|
return status;
|
|
}
|
|
|
|
static void pdc_issue_atapi_pkt_cmd(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
void __iomem *port_mmio = (void __iomem *) ap->ioaddr.cmd_addr;
|
|
void __iomem *host_mmio = ap->host->mmio_base;
|
|
unsigned int nbytes;
|
|
unsigned int tmp;
|
|
|
|
writeb(0x00, port_mmio + PDC_CTLSTAT); /* route drive INT to SEQ 0 */
|
|
writeb(PDC_SEQCNTRL_INT_MASK, host_mmio + 0); /* but mask SEQ 0 INT */
|
|
|
|
/* select drive */
|
|
if (sata_scr_valid(ap)) {
|
|
tmp = PDC_DEVICE_SATA;
|
|
} else {
|
|
tmp = ATA_DEVICE_OBS;
|
|
if (qc->dev->devno != 0)
|
|
tmp |= ATA_DEV1;
|
|
}
|
|
writeb(tmp, port_mmio + PDC_DEVICE);
|
|
ata_busy_wait(ap, ATA_BUSY, 1000);
|
|
|
|
writeb(0x00, port_mmio + PDC_SECTOR_COUNT);
|
|
writeb(0x00, port_mmio + PDC_SECTOR_NUMBER);
|
|
|
|
/* set feature and byte counter registers */
|
|
if (qc->tf.protocol != ATA_PROT_ATAPI_DMA) {
|
|
tmp = PDC_FEATURE_ATAPI_PIO;
|
|
/* set byte counter register to real transfer byte count */
|
|
nbytes = qc->nbytes;
|
|
if (!nbytes)
|
|
nbytes = qc->nsect << 9;
|
|
if (nbytes > 0xffff)
|
|
nbytes = 0xffff;
|
|
} else {
|
|
tmp = PDC_FEATURE_ATAPI_DMA;
|
|
/* set byte counter register to 0 */
|
|
nbytes = 0;
|
|
}
|
|
writeb(tmp, port_mmio + PDC_FEATURE);
|
|
writeb(nbytes & 0xFF, port_mmio + PDC_CYLINDER_LOW);
|
|
writeb((nbytes >> 8) & 0xFF, port_mmio + PDC_CYLINDER_HIGH);
|
|
|
|
/* send ATAPI packet command 0xA0 */
|
|
writeb(ATA_CMD_PACKET, port_mmio + PDC_COMMAND);
|
|
|
|
/*
|
|
* At this point in the issuing of a packet command, the Promise
|
|
* driver busy-waits for INT (CTLSTAT bit 27) if it detected
|
|
* (at port init time) that the device interrupts with assertion
|
|
* of DRQ after receiving a packet command.
|
|
*
|
|
* XXX: Do we need to handle this case as well? Does libata detect
|
|
* this case for us, or do we have to do our own per-port init?
|
|
*/
|
|
|
|
pdc_wait_for_drq(ap);
|
|
|
|
/* now the device only waits for the CDB */
|
|
}
|
|
|
|
static unsigned int pdc_qc_issue_prot(struct ata_queued_cmd *qc)
|
|
{
|
|
switch (qc->tf.protocol) {
|
|
case ATA_PROT_ATAPI_DMA:
|
|
pdc_issue_atapi_pkt_cmd(qc);
|
|
/*FALLTHROUGH*/
|
|
case ATA_PROT_DMA:
|
|
case ATA_PROT_NODATA:
|
|
pdc_packet_start(qc);
|
|
return 0;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return ata_qc_issue_prot(qc);
|
|
}
|
|
|
|
static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf)
|
|
{
|
|
WARN_ON (tf->protocol == ATA_PROT_DMA ||
|
|
tf->protocol == ATA_PROT_NODATA);
|
|
ata_tf_load(ap, tf);
|
|
}
|
|
|
|
|
|
static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf)
|
|
{
|
|
WARN_ON (tf->protocol == ATA_PROT_DMA ||
|
|
tf->protocol == ATA_PROT_NODATA);
|
|
ata_exec_command(ap, tf);
|
|
}
|
|
|
|
static int pdc_check_atapi_dma(struct ata_queued_cmd *qc)
|
|
{
|
|
u8 *scsicmd = qc->scsicmd->cmnd;
|
|
int pio = 1; /* atapi dma off by default */
|
|
|
|
/* Whitelist commands that may use DMA. */
|
|
switch (scsicmd[0]) {
|
|
case WRITE_12:
|
|
case WRITE_10:
|
|
case WRITE_6:
|
|
case READ_12:
|
|
case READ_10:
|
|
case READ_6:
|
|
case 0xad: /* READ_DVD_STRUCTURE */
|
|
case 0xbe: /* READ_CD */
|
|
pio = 0;
|
|
}
|
|
/* -45150 (FFFF4FA2) to -1 (FFFFFFFF) shall use PIO mode */
|
|
if (scsicmd[0] == WRITE_10) {
|
|
unsigned int lba;
|
|
lba = (scsicmd[2] << 24) | (scsicmd[3] << 16) | (scsicmd[4] << 8) | scsicmd[5];
|
|
if (lba >= 0xFFFF4FA2)
|
|
pio = 1;
|
|
}
|
|
return pio;
|
|
}
|
|
|
|
static int pdc_old_check_atapi_dma(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
|
|
/* First generation chips cannot use ATAPI DMA on SATA ports */
|
|
if (sata_scr_valid(ap))
|
|
return 1;
|
|
return pdc_check_atapi_dma(qc);
|
|
}
|
|
|
|
static void pdc_ata_setup_port(struct ata_ioports *port, unsigned long base)
|
|
{
|
|
port->cmd_addr = base;
|
|
port->data_addr = base;
|
|
port->feature_addr =
|
|
port->error_addr = base + 0x4;
|
|
port->nsect_addr = base + 0x8;
|
|
port->lbal_addr = base + 0xc;
|
|
port->lbam_addr = base + 0x10;
|
|
port->lbah_addr = base + 0x14;
|
|
port->device_addr = base + 0x18;
|
|
port->command_addr =
|
|
port->status_addr = base + 0x1c;
|
|
port->altstatus_addr =
|
|
port->ctl_addr = base + 0x38;
|
|
}
|
|
|
|
|
|
static void pdc_host_init(unsigned int chip_id, struct ata_probe_ent *pe)
|
|
{
|
|
void __iomem *mmio = pe->mmio_base;
|
|
struct pdc_host_priv *hp = pe->private_data;
|
|
int hotplug_offset;
|
|
u32 tmp;
|
|
|
|
if (hp->flags & PDC_FLAG_GEN_II)
|
|
hotplug_offset = PDC2_SATA_PLUG_CSR;
|
|
else
|
|
hotplug_offset = PDC_SATA_PLUG_CSR;
|
|
|
|
/*
|
|
* Except for the hotplug stuff, this is voodoo from the
|
|
* Promise driver. Label this entire section
|
|
* "TODO: figure out why we do this"
|
|
*/
|
|
|
|
/* enable BMR_BURST, maybe change FIFO_SHD to 8 dwords */
|
|
tmp = readl(mmio + PDC_FLASH_CTL);
|
|
tmp |= 0x02000; /* bit 13 (enable bmr burst) */
|
|
if (!(hp->flags & PDC_FLAG_GEN_II))
|
|
tmp |= 0x10000; /* bit 16 (fifo threshold at 8 dw) */
|
|
writel(tmp, mmio + PDC_FLASH_CTL);
|
|
|
|
/* clear plug/unplug flags for all ports */
|
|
tmp = readl(mmio + hotplug_offset);
|
|
writel(tmp | 0xff, mmio + hotplug_offset);
|
|
|
|
/* mask plug/unplug ints */
|
|
tmp = readl(mmio + hotplug_offset);
|
|
writel(tmp | 0xff0000, mmio + hotplug_offset);
|
|
|
|
/* don't initialise TBG or SLEW on 2nd generation chips */
|
|
if (hp->flags & PDC_FLAG_GEN_II)
|
|
return;
|
|
|
|
/* reduce TBG clock to 133 Mhz. */
|
|
tmp = readl(mmio + PDC_TBG_MODE);
|
|
tmp &= ~0x30000; /* clear bit 17, 16*/
|
|
tmp |= 0x10000; /* set bit 17:16 = 0:1 */
|
|
writel(tmp, mmio + PDC_TBG_MODE);
|
|
|
|
readl(mmio + PDC_TBG_MODE); /* flush */
|
|
msleep(10);
|
|
|
|
/* adjust slew rate control register. */
|
|
tmp = readl(mmio + PDC_SLEW_CTL);
|
|
tmp &= 0xFFFFF03F; /* clear bit 11 ~ 6 */
|
|
tmp |= 0x00000900; /* set bit 11-9 = 100b , bit 8-6 = 100 */
|
|
writel(tmp, mmio + PDC_SLEW_CTL);
|
|
}
|
|
|
|
static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
|
|
{
|
|
static int printed_version;
|
|
struct ata_probe_ent *probe_ent = NULL;
|
|
struct pdc_host_priv *hp;
|
|
unsigned long base;
|
|
void __iomem *mmio_base;
|
|
unsigned int board_idx = (unsigned int) ent->driver_data;
|
|
int pci_dev_busy = 0;
|
|
int rc;
|
|
u8 tmp;
|
|
|
|
if (!printed_version++)
|
|
dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
|
|
|
|
rc = pci_enable_device(pdev);
|
|
if (rc)
|
|
return rc;
|
|
|
|
rc = pci_request_regions(pdev, DRV_NAME);
|
|
if (rc) {
|
|
pci_dev_busy = 1;
|
|
goto err_out;
|
|
}
|
|
|
|
rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
|
|
if (rc)
|
|
goto err_out_regions;
|
|
rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
|
|
if (rc)
|
|
goto err_out_regions;
|
|
|
|
probe_ent = kzalloc(sizeof(*probe_ent), GFP_KERNEL);
|
|
if (probe_ent == NULL) {
|
|
rc = -ENOMEM;
|
|
goto err_out_regions;
|
|
}
|
|
|
|
probe_ent->dev = pci_dev_to_dev(pdev);
|
|
INIT_LIST_HEAD(&probe_ent->node);
|
|
|
|
mmio_base = pci_iomap(pdev, 3, 0);
|
|
if (mmio_base == NULL) {
|
|
rc = -ENOMEM;
|
|
goto err_out_free_ent;
|
|
}
|
|
base = (unsigned long) mmio_base;
|
|
|
|
hp = kzalloc(sizeof(*hp), GFP_KERNEL);
|
|
if (hp == NULL) {
|
|
rc = -ENOMEM;
|
|
goto err_out_free_ent;
|
|
}
|
|
|
|
probe_ent->private_data = hp;
|
|
|
|
probe_ent->sht = pdc_port_info[board_idx].sht;
|
|
probe_ent->port_flags = pdc_port_info[board_idx].flags;
|
|
probe_ent->pio_mask = pdc_port_info[board_idx].pio_mask;
|
|
probe_ent->mwdma_mask = pdc_port_info[board_idx].mwdma_mask;
|
|
probe_ent->udma_mask = pdc_port_info[board_idx].udma_mask;
|
|
probe_ent->port_ops = pdc_port_info[board_idx].port_ops;
|
|
|
|
probe_ent->irq = pdev->irq;
|
|
probe_ent->irq_flags = IRQF_SHARED;
|
|
probe_ent->mmio_base = mmio_base;
|
|
|
|
pdc_ata_setup_port(&probe_ent->port[0], base + 0x200);
|
|
pdc_ata_setup_port(&probe_ent->port[1], base + 0x280);
|
|
|
|
probe_ent->port[0].scr_addr = base + 0x400;
|
|
probe_ent->port[1].scr_addr = base + 0x500;
|
|
|
|
/* notice 4-port boards */
|
|
switch (board_idx) {
|
|
case board_40518:
|
|
hp->flags |= PDC_FLAG_GEN_II;
|
|
/* Fall through */
|
|
case board_20319:
|
|
probe_ent->n_ports = 4;
|
|
|
|
pdc_ata_setup_port(&probe_ent->port[2], base + 0x300);
|
|
pdc_ata_setup_port(&probe_ent->port[3], base + 0x380);
|
|
|
|
probe_ent->port[2].scr_addr = base + 0x600;
|
|
probe_ent->port[3].scr_addr = base + 0x700;
|
|
break;
|
|
case board_2057x:
|
|
hp->flags |= PDC_FLAG_GEN_II;
|
|
/* Fall through */
|
|
case board_2037x:
|
|
/* TX2plus boards also have a PATA port */
|
|
tmp = readb(mmio_base + PDC_FLASH_CTL+1);
|
|
if (!(tmp & 0x80)) {
|
|
probe_ent->n_ports = 3;
|
|
pdc_ata_setup_port(&probe_ent->port[2], base + 0x300);
|
|
hp->port_flags[2] = ATA_FLAG_SLAVE_POSS;
|
|
printk(KERN_INFO DRV_NAME " PATA port found\n");
|
|
} else
|
|
probe_ent->n_ports = 2;
|
|
hp->port_flags[0] = ATA_FLAG_SATA;
|
|
hp->port_flags[1] = ATA_FLAG_SATA;
|
|
break;
|
|
case board_20619:
|
|
probe_ent->n_ports = 4;
|
|
|
|
pdc_ata_setup_port(&probe_ent->port[2], base + 0x300);
|
|
pdc_ata_setup_port(&probe_ent->port[3], base + 0x380);
|
|
|
|
probe_ent->port[2].scr_addr = base + 0x600;
|
|
probe_ent->port[3].scr_addr = base + 0x700;
|
|
break;
|
|
default:
|
|
BUG();
|
|
break;
|
|
}
|
|
|
|
pci_set_master(pdev);
|
|
|
|
/* initialize adapter */
|
|
pdc_host_init(board_idx, probe_ent);
|
|
|
|
/* FIXME: Need any other frees than hp? */
|
|
if (!ata_device_add(probe_ent))
|
|
kfree(hp);
|
|
|
|
kfree(probe_ent);
|
|
|
|
return 0;
|
|
|
|
err_out_free_ent:
|
|
kfree(probe_ent);
|
|
err_out_regions:
|
|
pci_release_regions(pdev);
|
|
err_out:
|
|
if (!pci_dev_busy)
|
|
pci_disable_device(pdev);
|
|
return rc;
|
|
}
|
|
|
|
|
|
static int __init pdc_ata_init(void)
|
|
{
|
|
return pci_register_driver(&pdc_ata_pci_driver);
|
|
}
|
|
|
|
|
|
static void __exit pdc_ata_exit(void)
|
|
{
|
|
pci_unregister_driver(&pdc_ata_pci_driver);
|
|
}
|
|
|
|
|
|
MODULE_AUTHOR("Jeff Garzik");
|
|
MODULE_DESCRIPTION("Promise ATA TX2/TX4/TX4000 low-level driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DEVICE_TABLE(pci, pdc_ata_pci_tbl);
|
|
MODULE_VERSION(DRV_VERSION);
|
|
|
|
module_init(pdc_ata_init);
|
|
module_exit(pdc_ata_exit);
|