1
linux/drivers/usb
Craig Shelley 93ef1f1fbc USB: CP210X Use official request code definitions
The CP210X driver was developed without official device specifications.
This has lead to an incorrect assumption that all GET request codes are
equal to the corresponding SET request code +1.
This patch removes this incorrect assumption, and uses request code
definitions based on the updated GPL driver from SiLabs.
This modification is needed before extended functionality such as GPIO
on CP2103 can be supported.

Signed-off-by: Craig Shelley <craig@microtron.org.uk>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:51:05 -07:00
..
atm USB: cxacru: Fix negative dB output 2009-05-08 19:34:56 -07:00
c67x00
class tty: Clean up the ACM driver to CodingStyle 2009-06-11 08:50:58 -07:00
core USB: pass mem_flags to dma_alloc_coherent 2009-04-23 14:15:28 -07:00
gadget USB: atmel_usb_udc: Use kzalloc() to allocate ep structures 2009-05-28 13:54:41 -07:00
host USB: isp1760: urb_dequeue doesn't always find the urbs 2009-05-28 13:54:43 -07:00
image USB: replace uses of __constant_{endian} 2009-03-24 16:20:33 -07:00
misc USB: remove phidget drivers from kernel tree. 2009-03-24 16:20:37 -07:00
mon USB: usbmon: Add binary API v1 2009-03-24 16:20:36 -07:00
musb USB: musb: fix build when !CONFIG_PM 2009-04-23 14:15:27 -07:00
otg USB: otg: Fix bug on remove path without transceiver 2009-04-23 14:15:31 -07:00
serial USB: CP210X Use official request code definitions 2009-06-11 08:51:05 -07:00
storage USB: unusual_devs: extend nokia 6288 bcd range 2009-05-08 19:34:57 -07:00
wusbcore WUSB: correct format of wusb_chid sysfs file 2009-04-17 10:50:29 -07:00
Kconfig sh: Add OHCI USB support for SH7786 2009-03-16 19:40:34 +09:00
Makefile Revert "USB: Correct Makefile to make isp1760 buildable" 2009-05-28 13:54:43 -07:00
README
usb-skeleton.c USB: skeleton: Use dev_info instead of info 2009-03-24 16:20:30 -07:00

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.