kevin/linux
1
Fork 0
Code
93c43f2561
linux/arch/arm/mach-omap1/board-perseus2.c
Tony Lindgren 93c43f2561 omap: mux: Do keypad muxing in board-*.c files 
This way we get pin muxing out of plat-omap and can convert H4 to use the
new mux functions.

Note that it should be safe to assume we can mux all the keypad pins
except on H4 which may have Menelaus connected.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05 16:31:39 +03:00

358 lines
7.8 KiB
C
Raw Blame History

/*
* linux/arch/arm/mach-omap1/board-perseus2.c
*
* Modified from board-generic.c
*
* Original OMAP730 support by Jean Pihet <j-pihet@ti.com>
* Updated for 2.6 by Kevin Hilman <kjh@hilman.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/input.h>
#include <linux/smc91x.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <plat/tc.h>
#include <mach/gpio.h>
#include <plat/mux.h>
#include <plat/fpga.h>
#include <plat/flash.h>
#include <plat/keypad.h>
#include <plat/common.h>
#include <plat/board.h>
static int p2_keymap[] = {
KEY(0,0,KEY_UP),
KEY(0,1,KEY_RIGHT),
KEY(0,2,KEY_LEFT),
KEY(0,3,KEY_DOWN),
KEY(0,4,KEY_ENTER),
KEY(1,0,KEY_F10),
KEY(1,1,KEY_SEND),
KEY(1,2,KEY_END),
KEY(1,3,KEY_VOLUMEDOWN),
KEY(1,4,KEY_VOLUMEUP),
KEY(1,5,KEY_RECORD),
KEY(2,0,KEY_F9),
KEY(2,1,KEY_3),
KEY(2,2,KEY_6),
KEY(2,3,KEY_9),
KEY(2,4,KEY_KPDOT),
KEY(3,0,KEY_BACK),
KEY(3,1,KEY_2),
KEY(3,2,KEY_5),
KEY(3,3,KEY_8),
KEY(3,4,KEY_0),
KEY(3,5,KEY_KPSLASH),
KEY(4,0,KEY_HOME),
KEY(4,1,KEY_1),
KEY(4,2,KEY_4),
KEY(4,3,KEY_7),
KEY(4,4,KEY_KPASTERISK),
KEY(4,5,KEY_POWER),
0
};
static struct smc91x_platdata smc91x_info = {
.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
.leda = RPC_LED_100_10,
.ledb = RPC_LED_TX_RX,
};
static struct resource smc91x_resources[] = {
[0] = {
.start = H2P2_DBG_FPGA_ETHR_START, /* Physical */
.end = H2P2_DBG_FPGA_ETHR_START + 0xf,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = INT_7XX_MPU_EXT_NIRQ,
.end = 0,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
},
};
static struct mtd_partition nor_partitions[] = {
/* bootloader (U-Boot, etc) in first sector */
{
.name = "bootloader",
.offset = 0,
.size = SZ_128K,
.mask_flags = MTD_WRITEABLE, /* force read-only */
},
/* bootloader params in the next sector */
{
.name = "params",
.offset = MTDPART_OFS_APPEND,
.size = SZ_128K,
.mask_flags = 0,
},
/* kernel */
{
.name = "kernel",
.offset = MTDPART_OFS_APPEND,
.size = SZ_2M,
.mask_flags = 0
},
/* rest of flash is a file system */
{
.name = "rootfs",
.offset = MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL,
.mask_flags = 0
},
};
static struct physmap_flash_data nor_data = {
.width = 2,
.set_vpp = omap1_set_vpp,
.parts = nor_partitions,
.nr_parts = ARRAY_SIZE(nor_partitions),
};
static struct resource nor_resource = {
.start = OMAP_CS0_PHYS,
.end = OMAP_CS0_PHYS + SZ_32M - 1,
.flags = IORESOURCE_MEM,
};
static struct platform_device nor_device = {
.name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &nor_data,
},
.num_resources = 1,
.resource = &nor_resource,
};
static void nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
{
struct nand_chip *this = mtd->priv;
unsigned long mask;
if (cmd == NAND_CMD_NONE)
return;
mask = (ctrl & NAND_CLE) ? 0x02 : 0;
if (ctrl & NAND_ALE)
mask |= 0x04;
writeb(cmd, (unsigned long)this->IO_ADDR_W | mask);
}
#define P2_NAND_RB_GPIO_PIN 62
static int nand_dev_ready(struct mtd_info *mtd)
{
return gpio_get_value(P2_NAND_RB_GPIO_PIN);
}
static const char *part_probes[] = { "cmdlinepart", NULL };
static struct platform_nand_data nand_data = {
.chip = {
.nr_chips = 1,
.chip_offset = 0,
.options = NAND_SAMSUNG_LP_OPTIONS,
.part_probe_types = part_probes,
},
.ctrl = {
.cmd_ctrl = nand_cmd_ctl,
.dev_ready = nand_dev_ready,
},
};
static struct resource nand_resource = {
.start = OMAP_CS3_PHYS,
.end = OMAP_CS3_PHYS + SZ_4K - 1,
.flags = IORESOURCE_MEM,
};
static struct platform_device nand_device = {
.name = "gen_nand",
.id = 0,
.dev = {
.platform_data = &nand_data,
},
.num_resources = 1,
.resource = &nand_resource,
};
static struct platform_device smc91x_device = {
.name = "smc91x",
.id = 0,
.dev = {
.platform_data = &smc91x_info,
},
.num_resources = ARRAY_SIZE(smc91x_resources),
.resource = smc91x_resources,
};
static struct resource kp_resources[] = {
[0] = {
.start = INT_7XX_MPUIO_KEYPAD,
.end = INT_7XX_MPUIO_KEYPAD,
.flags = IORESOURCE_IRQ,
},
};
static struct omap_kp_platform_data kp_data = {
.rows = 8,
.cols = 8,
.keymap = p2_keymap,
.keymapsize = ARRAY_SIZE(p2_keymap),
.delay = 4,
.dbounce = 1,
};
static struct platform_device kp_device = {
.name = "omap-keypad",
.id = -1,
.dev = {
.platform_data = &kp_data,
},
.num_resources = ARRAY_SIZE(kp_resources),
.resource = kp_resources,
};
static struct platform_device lcd_device = {
.name = "lcd_p2",
.id = -1,
};
static struct platform_device *devices[] __initdata = {
&nor_device,
&nand_device,
&smc91x_device,
&kp_device,
&lcd_device,
};
static struct omap_lcd_config perseus2_lcd_config __initdata = {
.ctrl_name = "internal",
};
static struct omap_board_config_kernel perseus2_config[] __initdata = {
{ OMAP_TAG_LCD, &perseus2_lcd_config },
};
static void __init omap_perseus2_init(void)
{
if (gpio_request(P2_NAND_RB_GPIO_PIN, "NAND ready") < 0)
BUG();
gpio_direction_input(P2_NAND_RB_GPIO_PIN);
omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
/* Mux pins for keypad */
omap_cfg_reg(E2_7XX_KBR0);
omap_cfg_reg(J7_7XX_KBR1);
omap_cfg_reg(E1_7XX_KBR2);
omap_cfg_reg(F3_7XX_KBR3);
omap_cfg_reg(D2_7XX_KBR4);
omap_cfg_reg(C2_7XX_KBC0);
omap_cfg_reg(D3_7XX_KBC1);
omap_cfg_reg(E4_7XX_KBC2);
omap_cfg_reg(F4_7XX_KBC3);
omap_cfg_reg(E3_7XX_KBC4);
platform_add_devices(devices, ARRAY_SIZE(devices));
omap_board_config = perseus2_config;
omap_board_config_size = ARRAY_SIZE(perseus2_config);
omap_serial_init();
omap_register_i2c_bus(1, 100, NULL, 0);
}
static void __init perseus2_init_smc91x(void)
{
fpga_write(1, H2P2_DBG_FPGA_LAN_RESET);
mdelay(50);
fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1,
H2P2_DBG_FPGA_LAN_RESET);
mdelay(50);
}
static void __init omap_perseus2_init_irq(void)
{
omap1_init_common_hw();
omap_init_irq();
omap_gpio_init();
perseus2_init_smc91x();
}
/* Only FPGA needs to be mapped here. All others are done with ioremap */
static struct map_desc omap_perseus2_io_desc[] __initdata = {
{
.virtual = H2P2_DBG_FPGA_BASE,
.pfn = __phys_to_pfn(H2P2_DBG_FPGA_START),
.length = H2P2_DBG_FPGA_SIZE,
.type = MT_DEVICE
}
};
static void __init omap_perseus2_map_io(void)
{
omap1_map_common_io();
iotable_init(omap_perseus2_io_desc,
ARRAY_SIZE(omap_perseus2_io_desc));
/* Early, board-dependent init */
/*
* Hold GSM Reset until needed
*/
omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL);
/*
* UARTs -> done automagically by 8250 driver
*/
/*
* CSx timings, GPIO Mux ... setup
*/
/* Flash: CS0 timings setup */
omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0);
omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0);
/*
* Ethernet support through the debug board
* CS1 timings setup
*/
omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1);
omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1);
/*
* Configure MPU_EXT_NIRQ IO in IO_CONF9 register,
* It is used as the Ethernet controller interrupt
*/
omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF, OMAP7XX_IO_CONF_9);
}
MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2")
/* Maintainer: Kevin Hilman <kjh@hilman.org> */
.phys_io = 0xfff00000,
.io_pg_offst = ((0xfef00000) >> 18) & 0xfffc,
.boot_params = 0x10000100,
.map_io = omap_perseus2_map_io,
.init_irq = omap_perseus2_init_irq,
.init_machine = omap_perseus2_init,
.timer = &omap_timer,
MACHINE_END
View Git Blame Copy Permalink