kevin/linux
1
Fork 0
Code
923430cfee
linux/drivers/regulator/wm831x-dcdc.c
Mark Brown afb8bb805b regulator: Convert WM831x drivers to use get_voltage_sel() 
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-12 14:33:02 +00:00

1054 lines
26 KiB
C
Raw Blame History

/*
* wm831x-dcdc.c -- DC-DC buck convertor driver for the WM831x series
*
* Copyright 2009 Wolfson Microelectronics PLC.
*
* Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/bitops.h>
#include <linux/err.h>
#include <linux/i2c.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/gpio.h>
#include <linux/slab.h>
#include <linux/mfd/wm831x/core.h>
#include <linux/mfd/wm831x/regulator.h>
#include <linux/mfd/wm831x/pdata.h>
#define WM831X_BUCKV_MAX_SELECTOR 0x68
#define WM831X_BUCKP_MAX_SELECTOR 0x66
#define WM831X_DCDC_MODE_FAST 0
#define WM831X_DCDC_MODE_NORMAL 1
#define WM831X_DCDC_MODE_IDLE 2
#define WM831X_DCDC_MODE_STANDBY 3
#define WM831X_DCDC_MAX_NAME 6
/* Register offsets in control block */
#define WM831X_DCDC_CONTROL_1 0
#define WM831X_DCDC_CONTROL_2 1
#define WM831X_DCDC_ON_CONFIG 2
#define WM831X_DCDC_SLEEP_CONTROL 3
#define WM831X_DCDC_DVS_CONTROL 4
/*
* Shared
*/
struct wm831x_dcdc {
char name[WM831X_DCDC_MAX_NAME];
struct regulator_desc desc;
int base;
struct wm831x *wm831x;
struct regulator_dev *regulator;
int dvs_gpio;
int dvs_gpio_state;
int on_vsel;
int dvs_vsel;
};
static int wm831x_dcdc_is_enabled(struct regulator_dev *rdev)
{
struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
struct wm831x *wm831x = dcdc->wm831x;
int mask = 1 << rdev_get_id(rdev);
int reg;
reg = wm831x_reg_read(wm831x, WM831X_DCDC_ENABLE);
if (reg < 0)
return reg;
if (reg & mask)
return 1;
else
return 0;
}
static int wm831x_dcdc_enable(struct regulator_dev *rdev)
{
struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
struct wm831x *wm831x = dcdc->wm831x;
int mask = 1 << rdev_get_id(rdev);
return wm831x_set_bits(wm831x, WM831X_DCDC_ENABLE, mask, mask);
}
static int wm831x_dcdc_disable(struct regulator_dev *rdev)
{
struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
struct wm831x *wm831x = dcdc->wm831x;
int mask = 1 << rdev_get_id(rdev);
return wm831x_set_bits(wm831x, WM831X_DCDC_ENABLE, mask, 0);
}
static unsigned int wm831x_dcdc_get_mode(struct regulator_dev *rdev)
{
struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
struct wm831x *wm831x = dcdc->wm831x;
u16 reg = dcdc->base + WM831X_DCDC_ON_CONFIG;
int val;
val = wm831x_reg_read(wm831x, reg);
if (val < 0)
return val;
val = (val & WM831X_DC1_ON_MODE_MASK) >> WM831X_DC1_ON_MODE_SHIFT;
switch (val) {
case WM831X_DCDC_MODE_FAST:
return REGULATOR_MODE_FAST;
case WM831X_DCDC_MODE_NORMAL:
return REGULATOR_MODE_NORMAL;
case WM831X_DCDC_MODE_STANDBY:
return REGULATOR_MODE_STANDBY;
case WM831X_DCDC_MODE_IDLE:
return REGULATOR_MODE_IDLE;
default:
BUG();
}
}
static int wm831x_dcdc_set_mode_int(struct wm831x *wm831x, int reg,
unsigned int mode)
{
int val;
switch (mode) {
case REGULATOR_MODE_FAST:
val = WM831X_DCDC_MODE_FAST;
break;
case REGULATOR_MODE_NORMAL:
val = WM831X_DCDC_MODE_NORMAL;
break;
case REGULATOR_MODE_STANDBY:
val = WM831X_DCDC_MODE_STANDBY;
break;
case REGULATOR_MODE_IDLE:
val = WM831X_DCDC_MODE_IDLE;
break;
default:
return -EINVAL;
}
return wm831x_set_bits(wm831x, reg, WM831X_DC1_ON_MODE_MASK,
val << WM831X_DC1_ON_MODE_SHIFT);
}
static int wm831x_dcdc_set_mode(struct regulator_dev *rdev, unsigned int mode)
{
struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
struct wm831x *wm831x = dcdc->wm831x;
u16 reg = dcdc->base + WM831X_DCDC_ON_CONFIG;
return wm831x_dcdc_set_mode_int(wm831x, reg, mode);
}
static int wm831x_dcdc_set_suspend_mode(struct regulator_dev *rdev,
unsigned int mode)
{
struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
struct wm831x *wm831x = dcdc->wm831x;
u16 reg = dcdc->base + WM831X_DCDC_SLEEP_CONTROL;
return wm831x_dcdc_set_mode_int(wm831x, reg, mode);
}
static int wm831x_dcdc_get_status(struct regulator_dev *rdev)
{
struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
struct wm831x *wm831x = dcdc->wm831x;
int ret;
/* First, check for errors */
ret = wm831x_reg_read(wm831x, WM831X_DCDC_UV_STATUS);
if (ret < 0)
return ret;
if (ret & (1 << rdev_get_id(rdev))) {
dev_dbg(wm831x->dev, "DCDC%d under voltage\n",
rdev_get_id(rdev) + 1);
return REGULATOR_STATUS_ERROR;
}
/* DCDC1 and DCDC2 can additionally detect high voltage/current */
if (rdev_get_id(rdev) < 2) {
if (ret & (WM831X_DC1_OV_STS << rdev_get_id(rdev))) {
dev_dbg(wm831x->dev, "DCDC%d over voltage\n",
rdev_get_id(rdev) + 1);
return REGULATOR_STATUS_ERROR;
}
if (ret & (WM831X_DC1_HC_STS << rdev_get_id(rdev))) {
dev_dbg(wm831x->dev, "DCDC%d over current\n",
rdev_get_id(rdev) + 1);
return REGULATOR_STATUS_ERROR;
}
}
/* Is the regulator on? */
ret = wm831x_reg_read(wm831x, WM831X_DCDC_STATUS);
if (ret < 0)
return ret;
if (!(ret & (1 << rdev_get_id(rdev))))
return REGULATOR_STATUS_OFF;
/* TODO: When we handle hardware control modes so we can report the
* current mode. */
return REGULATOR_STATUS_ON;
}
static irqreturn_t wm831x_dcdc_uv_irq(int irq, void *data)
{
struct wm831x_dcdc *dcdc = data;
regulator_notifier_call_chain(dcdc->regulator,
REGULATOR_EVENT_UNDER_VOLTAGE,
NULL);
return IRQ_HANDLED;
}
static irqreturn_t wm831x_dcdc_oc_irq(int irq, void *data)
{
struct wm831x_dcdc *dcdc = data;
regulator_notifier_call_chain(dcdc->regulator,
REGULATOR_EVENT_OVER_CURRENT,
NULL);
return IRQ_HANDLED;
}
/*
* BUCKV specifics
*/
static int wm831x_buckv_list_voltage(struct regulator_dev *rdev,
unsigned selector)
{
if (selector <= 0x8)
return 600000;
if (selector <= WM831X_BUCKV_MAX_SELECTOR)
return 600000 + ((selector - 0x8) * 12500);
return -EINVAL;
}
static int wm831x_buckv_select_min_voltage(struct regulator_dev *rdev,
int min_uV, int max_uV)
{
u16 vsel;
if (min_uV < 600000)
vsel = 0;
else if (min_uV <= 1800000)
vsel = ((min_uV - 600000) / 12500) + 8;
else
return -EINVAL;
if (wm831x_buckv_list_voltage(rdev, vsel) > max_uV)
return -EINVAL;
return vsel;
}
static int wm831x_buckv_select_max_voltage(struct regulator_dev *rdev,
int min_uV, int max_uV)
{
u16 vsel;
if (max_uV < 600000 || max_uV > 1800000)
return -EINVAL;
vsel = ((max_uV - 600000) / 12500) + 8;
if (wm831x_buckv_list_voltage(rdev, vsel) < min_uV ||
wm831x_buckv_list_voltage(rdev, vsel) < max_uV)
return -EINVAL;
return vsel;
}
static int wm831x_buckv_set_dvs(struct regulator_dev *rdev, int state)
{
struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
if (state == dcdc->dvs_gpio_state)
return 0;
dcdc->dvs_gpio_state = state;
gpio_set_value(dcdc->dvs_gpio, state);
/* Should wait for DVS state change to be asserted if we have
* a GPIO for it, for now assume the device is configured
* for the fastest possible transition.
*/
return 0;
}
static int wm831x_buckv_set_voltage(struct regulator_dev *rdev,
int min_uV, int max_uV, unsigned *selector)
{
struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
struct wm831x *wm831x = dcdc->wm831x;
int on_reg = dcdc->base + WM831X_DCDC_ON_CONFIG;
int dvs_reg = dcdc->base + WM831X_DCDC_DVS_CONTROL;
int vsel, ret;
vsel = wm831x_buckv_select_min_voltage(rdev, min_uV, max_uV);
if (vsel < 0)
return vsel;
*selector = vsel;
/* If this value is already set then do a GPIO update if we can */
if (dcdc->dvs_gpio && dcdc->on_vsel == vsel)
return wm831x_buckv_set_dvs(rdev, 0);
if (dcdc->dvs_gpio && dcdc->dvs_vsel == vsel)
return wm831x_buckv_set_dvs(rdev, 1);
/* Always set the ON status to the minimum voltage */
ret = wm831x_set_bits(wm831x, on_reg, WM831X_DC1_ON_VSEL_MASK, vsel);
if (ret < 0)
return ret;
dcdc->on_vsel = vsel;
if (!dcdc->dvs_gpio)
return ret;
/* Kick the voltage transition now */
ret = wm831x_buckv_set_dvs(rdev, 0);
if (ret < 0)
return ret;
/* Set the high voltage as the DVS voltage. This is optimised
* for CPUfreq usage, most processors will keep the maximum
* voltage constant and lower the minimum with the frequency. */
vsel = wm831x_buckv_select_max_voltage(rdev, min_uV, max_uV);
if (vsel < 0) {
/* This should never happen - at worst the same vsel
* should be chosen */
WARN_ON(vsel < 0);
return 0;
}
/* Don't bother if it's the same VSEL we're already using */
if (vsel == dcdc->on_vsel)
return 0;
ret = wm831x_set_bits(wm831x, dvs_reg, WM831X_DC1_DVS_VSEL_MASK, vsel);
if (ret == 0)
dcdc->dvs_vsel = vsel;
else
dev_warn(wm831x->dev, "Failed to set DCDC DVS VSEL: %d\n",
ret);
return 0;
}
static int wm831x_buckv_set_suspend_voltage(struct regulator_dev *rdev,
int uV)
{
struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
struct wm831x *wm831x = dcdc->wm831x;
u16 reg = dcdc->base + WM831X_DCDC_SLEEP_CONTROL;
int vsel;
vsel = wm831x_buckv_select_min_voltage(rdev, uV, uV);
if (vsel < 0)
return vsel;
return wm831x_set_bits(wm831x, reg, WM831X_DC1_SLP_VSEL_MASK, vsel);
}
static int wm831x_buckv_get_voltage_sel(struct regulator_dev *rdev)
{
struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
if (dcdc->dvs_gpio && dcdc->dvs_gpio_state)
return dcdc->dvs_vsel;
else
return dcdc->on_vsel;
}
/* Current limit options */
static u16 wm831x_dcdc_ilim[] = {
125, 250, 375, 500, 625, 750, 875, 1000
};
static int wm831x_buckv_set_current_limit(struct regulator_dev *rdev,
int min_uA, int max_uA)
{
struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
struct wm831x *wm831x = dcdc->wm831x;
u16 reg = dcdc->base + WM831X_DCDC_CONTROL_2;
int i;
for (i = 0; i < ARRAY_SIZE(wm831x_dcdc_ilim); i++) {
if (max_uA <= wm831x_dcdc_ilim[i])
break;
}
if (i == ARRAY_SIZE(wm831x_dcdc_ilim))
return -EINVAL;
return wm831x_set_bits(wm831x, reg, WM831X_DC1_HC_THR_MASK, i);
}
static int wm831x_buckv_get_current_limit(struct regulator_dev *rdev)
{
struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
struct wm831x *wm831x = dcdc->wm831x;
u16 reg = dcdc->base + WM831X_DCDC_CONTROL_2;
int val;
val = wm831x_reg_read(wm831x, reg);
if (val < 0)
return val;
return wm831x_dcdc_ilim[val & WM831X_DC1_HC_THR_MASK];
}
static struct regulator_ops wm831x_buckv_ops = {
.set_voltage = wm831x_buckv_set_voltage,
.get_voltage_sel = wm831x_buckv_get_voltage_sel,
.list_voltage = wm831x_buckv_list_voltage,
.set_suspend_voltage = wm831x_buckv_set_suspend_voltage,
.set_current_limit = wm831x_buckv_set_current_limit,
.get_current_limit = wm831x_buckv_get_current_limit,
.is_enabled = wm831x_dcdc_is_enabled,
.enable = wm831x_dcdc_enable,
.disable = wm831x_dcdc_disable,
.get_status = wm831x_dcdc_get_status,
.get_mode = wm831x_dcdc_get_mode,
.set_mode = wm831x_dcdc_set_mode,
.set_suspend_mode = wm831x_dcdc_set_suspend_mode,
};
/*
* Set up DVS control. We just log errors since we can still run
* (with reduced performance) if we fail.
*/
static __devinit void wm831x_buckv_dvs_init(struct wm831x_dcdc *dcdc,
struct wm831x_buckv_pdata *pdata)
{
struct wm831x *wm831x = dcdc->wm831x;
int ret;
u16 ctrl;
if (!pdata || !pdata->dvs_gpio)
return;
switch (pdata->dvs_control_src) {
case 1:
ctrl = 2 << WM831X_DC1_DVS_SRC_SHIFT;
break;
case 2:
ctrl = 3 << WM831X_DC1_DVS_SRC_SHIFT;
break;
default:
dev_err(wm831x->dev, "Invalid DVS control source %d for %s\n",
pdata->dvs_control_src, dcdc->name);
return;
}
ret = wm831x_set_bits(wm831x, dcdc->base + WM831X_DCDC_DVS_CONTROL,
WM831X_DC1_DVS_SRC_MASK, ctrl);
if (ret < 0) {
dev_err(wm831x->dev, "Failed to set %s DVS source: %d\n",
dcdc->name, ret);
return;
}
ret = gpio_request(pdata->dvs_gpio, "DCDC DVS");
if (ret < 0) {
dev_err(wm831x->dev, "Failed to get %s DVS GPIO: %d\n",
dcdc->name, ret);
return;
}
/* gpiolib won't let us read the GPIO status so pick the higher
* of the two existing voltages so we take it as platform data.
*/
dcdc->dvs_gpio_state = pdata->dvs_init_state;
ret = gpio_direction_output(pdata->dvs_gpio, dcdc->dvs_gpio_state);
if (ret < 0) {
dev_err(wm831x->dev, "Failed to enable %s DVS GPIO: %d\n",
dcdc->name, ret);
gpio_free(pdata->dvs_gpio);
return;
}
dcdc->dvs_gpio = pdata->dvs_gpio;
}
static __devinit int wm831x_buckv_probe(struct platform_device *pdev)
{
struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
struct wm831x_pdata *pdata = wm831x->dev->platform_data;
int id = pdev->id % ARRAY_SIZE(pdata->dcdc);
struct wm831x_dcdc *dcdc;
struct resource *res;
int ret, irq;
dev_dbg(&pdev->dev, "Probing DCDC%d\n", id + 1);
if (pdata == NULL || pdata->dcdc[id] == NULL)
return -ENODEV;
dcdc = kzalloc(sizeof(struct wm831x_dcdc), GFP_KERNEL);
if (dcdc == NULL) {
dev_err(&pdev->dev, "Unable to allocate private data\n");
return -ENOMEM;
}
dcdc->wm831x = wm831x;
res = platform_get_resource(pdev, IORESOURCE_IO, 0);
if (res == NULL) {
dev_err(&pdev->dev, "No I/O resource\n");
ret = -EINVAL;
goto err;
}
dcdc->base = res->start;
snprintf(dcdc->name, sizeof(dcdc->name), "DCDC%d", id + 1);
dcdc->desc.name = dcdc->name;
dcdc->desc.id = id;
dcdc->desc.type = REGULATOR_VOLTAGE;
dcdc->desc.n_voltages = WM831X_BUCKV_MAX_SELECTOR + 1;
dcdc->desc.ops = &wm831x_buckv_ops;
dcdc->desc.owner = THIS_MODULE;
ret = wm831x_reg_read(wm831x, dcdc->base + WM831X_DCDC_ON_CONFIG);
if (ret < 0) {
dev_err(wm831x->dev, "Failed to read ON VSEL: %d\n", ret);
goto err;
}
dcdc->on_vsel = ret & WM831X_DC1_ON_VSEL_MASK;
ret = wm831x_reg_read(wm831x, dcdc->base + WM831X_DCDC_ON_CONFIG);
if (ret < 0) {
dev_err(wm831x->dev, "Failed to read DVS VSEL: %d\n", ret);
goto err;
}
dcdc->dvs_vsel = ret & WM831X_DC1_DVS_VSEL_MASK;
if (pdata->dcdc[id])
wm831x_buckv_dvs_init(dcdc, pdata->dcdc[id]->driver_data);
dcdc->regulator = regulator_register(&dcdc->desc, &pdev->dev,
pdata->dcdc[id], dcdc);
if (IS_ERR(dcdc->regulator)) {
ret = PTR_ERR(dcdc->regulator);
dev_err(wm831x->dev, "Failed to register DCDC%d: %d\n",
id + 1, ret);
goto err;
}
irq = platform_get_irq_byname(pdev, "UV");
ret = wm831x_request_irq(wm831x, irq, wm831x_dcdc_uv_irq,
IRQF_TRIGGER_RISING, dcdc->name,
dcdc);
if (ret != 0) {
dev_err(&pdev->dev, "Failed to request UV IRQ %d: %d\n",
irq, ret);
goto err_regulator;
}
irq = platform_get_irq_byname(pdev, "HC");
ret = wm831x_request_irq(wm831x, irq, wm831x_dcdc_oc_irq,
IRQF_TRIGGER_RISING, dcdc->name,
dcdc);
if (ret != 0) {
dev_err(&pdev->dev, "Failed to request HC IRQ %d: %d\n",
irq, ret);
goto err_uv;
}
platform_set_drvdata(pdev, dcdc);
return 0;
err_uv:
wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "UV"), dcdc);
err_regulator:
regulator_unregister(dcdc->regulator);
err:
if (dcdc->dvs_gpio)
gpio_free(dcdc->dvs_gpio);
kfree(dcdc);
return ret;
}
static __devexit int wm831x_buckv_remove(struct platform_device *pdev)
{
struct wm831x_dcdc *dcdc = platform_get_drvdata(pdev);
struct wm831x *wm831x = dcdc->wm831x;
platform_set_drvdata(pdev, NULL);
wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "HC"), dcdc);
wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "UV"), dcdc);
regulator_unregister(dcdc->regulator);
if (dcdc->dvs_gpio)
gpio_free(dcdc->dvs_gpio);
kfree(dcdc);
return 0;
}
static struct platform_driver wm831x_buckv_driver = {
.probe = wm831x_buckv_probe,
.remove = __devexit_p(wm831x_buckv_remove),
.driver = {
.name = "wm831x-buckv",
.owner = THIS_MODULE,
},
};
/*
* BUCKP specifics
*/
static int wm831x_buckp_list_voltage(struct regulator_dev *rdev,
unsigned selector)
{
if (selector <= WM831X_BUCKP_MAX_SELECTOR)
return 850000 + (selector * 25000);
else
return -EINVAL;
}
static int wm831x_buckp_set_voltage_int(struct regulator_dev *rdev, int reg,
int min_uV, int max_uV, int *selector)
{
struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
struct wm831x *wm831x = dcdc->wm831x;
u16 vsel;
if (min_uV <= 34000000)
vsel = (min_uV - 850000) / 25000;
else
return -EINVAL;
if (wm831x_buckp_list_voltage(rdev, vsel) > max_uV)
return -EINVAL;
*selector = vsel;
return wm831x_set_bits(wm831x, reg, WM831X_DC3_ON_VSEL_MASK, vsel);
}
static int wm831x_buckp_set_voltage(struct regulator_dev *rdev,
int min_uV, int max_uV,
unsigned *selector)
{
struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
u16 reg = dcdc->base + WM831X_DCDC_ON_CONFIG;
return wm831x_buckp_set_voltage_int(rdev, reg, min_uV, max_uV,
selector);
}
static int wm831x_buckp_set_suspend_voltage(struct regulator_dev *rdev,
int uV)
{
struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
u16 reg = dcdc->base + WM831X_DCDC_SLEEP_CONTROL;
unsigned selector;
return wm831x_buckp_set_voltage_int(rdev, reg, uV, uV, &selector);
}
static int wm831x_buckp_get_voltage_sel(struct regulator_dev *rdev)
{
struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
struct wm831x *wm831x = dcdc->wm831x;
u16 reg = dcdc->base + WM831X_DCDC_ON_CONFIG;
int val;
val = wm831x_reg_read(wm831x, reg);
if (val < 0)
return val;
return val & WM831X_DC3_ON_VSEL_MASK;
}
static struct regulator_ops wm831x_buckp_ops = {
.set_voltage = wm831x_buckp_set_voltage,
.get_voltage_sel = wm831x_buckp_get_voltage_sel,
.list_voltage = wm831x_buckp_list_voltage,
.set_suspend_voltage = wm831x_buckp_set_suspend_voltage,
.is_enabled = wm831x_dcdc_is_enabled,
.enable = wm831x_dcdc_enable,
.disable = wm831x_dcdc_disable,
.get_status = wm831x_dcdc_get_status,
.get_mode = wm831x_dcdc_get_mode,
.set_mode = wm831x_dcdc_set_mode,
.set_suspend_mode = wm831x_dcdc_set_suspend_mode,
};
static __devinit int wm831x_buckp_probe(struct platform_device *pdev)
{
struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
struct wm831x_pdata *pdata = wm831x->dev->platform_data;
int id = pdev->id % ARRAY_SIZE(pdata->dcdc);
struct wm831x_dcdc *dcdc;
struct resource *res;
int ret, irq;
dev_dbg(&pdev->dev, "Probing DCDC%d\n", id + 1);
if (pdata == NULL || pdata->dcdc[id] == NULL)
return -ENODEV;
dcdc = kzalloc(sizeof(struct wm831x_dcdc), GFP_KERNEL);
if (dcdc == NULL) {
dev_err(&pdev->dev, "Unable to allocate private data\n");
return -ENOMEM;
}
dcdc->wm831x = wm831x;
res = platform_get_resource(pdev, IORESOURCE_IO, 0);
if (res == NULL) {
dev_err(&pdev->dev, "No I/O resource\n");
ret = -EINVAL;
goto err;
}
dcdc->base = res->start;
snprintf(dcdc->name, sizeof(dcdc->name), "DCDC%d", id + 1);
dcdc->desc.name = dcdc->name;
dcdc->desc.id = id;
dcdc->desc.type = REGULATOR_VOLTAGE;
dcdc->desc.n_voltages = WM831X_BUCKP_MAX_SELECTOR + 1;
dcdc->desc.ops = &wm831x_buckp_ops;
dcdc->desc.owner = THIS_MODULE;
dcdc->regulator = regulator_register(&dcdc->desc, &pdev->dev,
pdata->dcdc[id], dcdc);
if (IS_ERR(dcdc->regulator)) {
ret = PTR_ERR(dcdc->regulator);
dev_err(wm831x->dev, "Failed to register DCDC%d: %d\n",
id + 1, ret);
goto err;
}
irq = platform_get_irq_byname(pdev, "UV");
ret = wm831x_request_irq(wm831x, irq, wm831x_dcdc_uv_irq,
IRQF_TRIGGER_RISING, dcdc->name,
dcdc);
if (ret != 0) {
dev_err(&pdev->dev, "Failed to request UV IRQ %d: %d\n",
irq, ret);
goto err_regulator;
}
platform_set_drvdata(pdev, dcdc);
return 0;
err_regulator:
regulator_unregister(dcdc->regulator);
err:
kfree(dcdc);
return ret;
}
static __devexit int wm831x_buckp_remove(struct platform_device *pdev)
{
struct wm831x_dcdc *dcdc = platform_get_drvdata(pdev);
struct wm831x *wm831x = dcdc->wm831x;
platform_set_drvdata(pdev, NULL);
wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "UV"), dcdc);
regulator_unregister(dcdc->regulator);
kfree(dcdc);
return 0;
}
static struct platform_driver wm831x_buckp_driver = {
.probe = wm831x_buckp_probe,
.remove = __devexit_p(wm831x_buckp_remove),
.driver = {
.name = "wm831x-buckp",
.owner = THIS_MODULE,
},
};
/*
* DCDC boost convertors
*/
static int wm831x_boostp_get_status(struct regulator_dev *rdev)
{
struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
struct wm831x *wm831x = dcdc->wm831x;
int ret;
/* First, check for errors */
ret = wm831x_reg_read(wm831x, WM831X_DCDC_UV_STATUS);
if (ret < 0)
return ret;
if (ret & (1 << rdev_get_id(rdev))) {
dev_dbg(wm831x->dev, "DCDC%d under voltage\n",
rdev_get_id(rdev) + 1);
return REGULATOR_STATUS_ERROR;
}
/* Is the regulator on? */
ret = wm831x_reg_read(wm831x, WM831X_DCDC_STATUS);
if (ret < 0)
return ret;
if (ret & (1 << rdev_get_id(rdev)))
return REGULATOR_STATUS_ON;
else
return REGULATOR_STATUS_OFF;
}
static struct regulator_ops wm831x_boostp_ops = {
.get_status = wm831x_boostp_get_status,
.is_enabled = wm831x_dcdc_is_enabled,
.enable = wm831x_dcdc_enable,
.disable = wm831x_dcdc_disable,
};
static __devinit int wm831x_boostp_probe(struct platform_device *pdev)
{
struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
struct wm831x_pdata *pdata = wm831x->dev->platform_data;
int id = pdev->id % ARRAY_SIZE(pdata->dcdc);
struct wm831x_dcdc *dcdc;
struct resource *res;
int ret, irq;
dev_dbg(&pdev->dev, "Probing DCDC%d\n", id + 1);
if (pdata == NULL || pdata->dcdc[id] == NULL)
return -ENODEV;
dcdc = kzalloc(sizeof(struct wm831x_dcdc), GFP_KERNEL);
if (dcdc == NULL) {
dev_err(&pdev->dev, "Unable to allocate private data\n");
return -ENOMEM;
}
dcdc->wm831x = wm831x;
res = platform_get_resource(pdev, IORESOURCE_IO, 0);
if (res == NULL) {
dev_err(&pdev->dev, "No I/O resource\n");
ret = -EINVAL;
goto err;
}
dcdc->base = res->start;
snprintf(dcdc->name, sizeof(dcdc->name), "DCDC%d", id + 1);
dcdc->desc.name = dcdc->name;
dcdc->desc.id = id;
dcdc->desc.type = REGULATOR_VOLTAGE;
dcdc->desc.ops = &wm831x_boostp_ops;
dcdc->desc.owner = THIS_MODULE;
dcdc->regulator = regulator_register(&dcdc->desc, &pdev->dev,
pdata->dcdc[id], dcdc);
if (IS_ERR(dcdc->regulator)) {
ret = PTR_ERR(dcdc->regulator);
dev_err(wm831x->dev, "Failed to register DCDC%d: %d\n",
id + 1, ret);
goto err;
}
irq = platform_get_irq_byname(pdev, "UV");
ret = wm831x_request_irq(wm831x, irq, wm831x_dcdc_uv_irq,
IRQF_TRIGGER_RISING, dcdc->name,
dcdc);
if (ret != 0) {
dev_err(&pdev->dev, "Failed to request UV IRQ %d: %d\n",
irq, ret);
goto err_regulator;
}
platform_set_drvdata(pdev, dcdc);
return 0;
err_regulator:
regulator_unregister(dcdc->regulator);
err:
kfree(dcdc);
return ret;
}
static __devexit int wm831x_boostp_remove(struct platform_device *pdev)
{
struct wm831x_dcdc *dcdc = platform_get_drvdata(pdev);
struct wm831x *wm831x = dcdc->wm831x;
platform_set_drvdata(pdev, NULL);
wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "UV"), dcdc);
regulator_unregister(dcdc->regulator);
kfree(dcdc);
return 0;
}
static struct platform_driver wm831x_boostp_driver = {
.probe = wm831x_boostp_probe,
.remove = __devexit_p(wm831x_boostp_remove),
.driver = {
.name = "wm831x-boostp",
.owner = THIS_MODULE,
},
};
/*
* External Power Enable
*
* These aren't actually DCDCs but look like them in hardware so share
* code.
*/
#define WM831X_EPE_BASE 6
static struct regulator_ops wm831x_epe_ops = {
.is_enabled = wm831x_dcdc_is_enabled,
.enable = wm831x_dcdc_enable,
.disable = wm831x_dcdc_disable,
.get_status = wm831x_dcdc_get_status,
};
static __devinit int wm831x_epe_probe(struct platform_device *pdev)
{
struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
struct wm831x_pdata *pdata = wm831x->dev->platform_data;
int id = pdev->id % ARRAY_SIZE(pdata->epe);
struct wm831x_dcdc *dcdc;
int ret;
dev_dbg(&pdev->dev, "Probing EPE%d\n", id + 1);
if (pdata == NULL || pdata->epe[id] == NULL)
return -ENODEV;
dcdc = kzalloc(sizeof(struct wm831x_dcdc), GFP_KERNEL);
if (dcdc == NULL) {
dev_err(&pdev->dev, "Unable to allocate private data\n");
return -ENOMEM;
}
dcdc->wm831x = wm831x;
/* For current parts this is correct; probably need to revisit
* in future.
*/
snprintf(dcdc->name, sizeof(dcdc->name), "EPE%d", id + 1);
dcdc->desc.name = dcdc->name;
dcdc->desc.id = id + WM831X_EPE_BASE; /* Offset in DCDC registers */
dcdc->desc.ops = &wm831x_epe_ops;
dcdc->desc.type = REGULATOR_VOLTAGE;
dcdc->desc.owner = THIS_MODULE;
dcdc->regulator = regulator_register(&dcdc->desc, &pdev->dev,
pdata->epe[id], dcdc);
if (IS_ERR(dcdc->regulator)) {
ret = PTR_ERR(dcdc->regulator);
dev_err(wm831x->dev, "Failed to register EPE%d: %d\n",
id + 1, ret);
goto err;
}
platform_set_drvdata(pdev, dcdc);
return 0;
err:
kfree(dcdc);
return ret;
}
static __devexit int wm831x_epe_remove(struct platform_device *pdev)
{
struct wm831x_dcdc *dcdc = platform_get_drvdata(pdev);
platform_set_drvdata(pdev, NULL);
regulator_unregister(dcdc->regulator);
kfree(dcdc);
return 0;
}
static struct platform_driver wm831x_epe_driver = {
.probe = wm831x_epe_probe,
.remove = __devexit_p(wm831x_epe_remove),
.driver = {
.name = "wm831x-epe",
.owner = THIS_MODULE,
},
};
static int __init wm831x_dcdc_init(void)
{
int ret;
ret = platform_driver_register(&wm831x_buckv_driver);
if (ret != 0)
pr_err("Failed to register WM831x BUCKV driver: %d\n", ret);
ret = platform_driver_register(&wm831x_buckp_driver);
if (ret != 0)
pr_err("Failed to register WM831x BUCKP driver: %d\n", ret);
ret = platform_driver_register(&wm831x_boostp_driver);
if (ret != 0)
pr_err("Failed to register WM831x BOOST driver: %d\n", ret);
ret = platform_driver_register(&wm831x_epe_driver);
if (ret != 0)
pr_err("Failed to register WM831x EPE driver: %d\n", ret);
return 0;
}
subsys_initcall(wm831x_dcdc_init);
static void __exit wm831x_dcdc_exit(void)
{
platform_driver_unregister(&wm831x_epe_driver);
platform_driver_unregister(&wm831x_boostp_driver);
platform_driver_unregister(&wm831x_buckp_driver);
platform_driver_unregister(&wm831x_buckv_driver);
}
module_exit(wm831x_dcdc_exit);
/* Module information */
MODULE_AUTHOR("Mark Brown");
MODULE_DESCRIPTION("WM831x DC-DC convertor driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:wm831x-buckv");
MODULE_ALIAS("platform:wm831x-buckp");
View Git Blame Copy Permalink