9aa6933892
On thecus n2100, the bootloader does not setup fans to run. In order to protect the user from frying their gear, start up fans on boot. Signed-off-by: Riku Voipio <riku.voipio@movial.fi> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
290 lines
6.4 KiB
C
290 lines
6.4 KiB
C
/*
|
|
* arch/arm/mach-iop32x/n2100.c
|
|
*
|
|
* Board support code for the Thecus N2100 platform.
|
|
*
|
|
* Author: Rory Bolt <rorybolt@pacbell.net>
|
|
* Copyright (C) 2002 Rory Bolt
|
|
* Copyright 2003 (c) MontaVista, Software, Inc.
|
|
* Copyright (C) 2004 Intel Corp.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
|
|
#include <linux/mm.h>
|
|
#include <linux/init.h>
|
|
#include <linux/f75375s.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/string.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/serial_core.h>
|
|
#include <linux/serial_8250.h>
|
|
#include <linux/mtd/physmap.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/reboot.h>
|
|
#include <asm/hardware.h>
|
|
#include <asm/io.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/map.h>
|
|
#include <asm/mach/pci.h>
|
|
#include <asm/mach/time.h>
|
|
#include <asm/mach-types.h>
|
|
#include <asm/page.h>
|
|
#include <asm/pgtable.h>
|
|
#include <asm/arch/time.h>
|
|
|
|
/*
|
|
* N2100 timer tick configuration.
|
|
*/
|
|
static void __init n2100_timer_init(void)
|
|
{
|
|
/* 33.000 MHz crystal. */
|
|
iop_init_time(198000000);
|
|
}
|
|
|
|
static struct sys_timer n2100_timer = {
|
|
.init = n2100_timer_init,
|
|
.offset = iop_gettimeoffset,
|
|
};
|
|
|
|
|
|
/*
|
|
* N2100 I/O.
|
|
*/
|
|
static struct map_desc n2100_io_desc[] __initdata = {
|
|
{ /* on-board devices */
|
|
.virtual = N2100_UART,
|
|
.pfn = __phys_to_pfn(N2100_UART),
|
|
.length = 0x00100000,
|
|
.type = MT_DEVICE
|
|
},
|
|
};
|
|
|
|
void __init n2100_map_io(void)
|
|
{
|
|
iop3xx_map_io();
|
|
iotable_init(n2100_io_desc, ARRAY_SIZE(n2100_io_desc));
|
|
}
|
|
|
|
|
|
/*
|
|
* N2100 PCI.
|
|
*/
|
|
static int __init
|
|
n2100_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
|
|
{
|
|
int irq;
|
|
|
|
if (PCI_SLOT(dev->devfn) == 1) {
|
|
/* RTL8110SB #1 */
|
|
irq = IRQ_IOP32X_XINT0;
|
|
} else if (PCI_SLOT(dev->devfn) == 2) {
|
|
/* RTL8110SB #2 */
|
|
irq = IRQ_IOP32X_XINT3;
|
|
} else if (PCI_SLOT(dev->devfn) == 3) {
|
|
/* Sil3512 */
|
|
irq = IRQ_IOP32X_XINT2;
|
|
} else if (PCI_SLOT(dev->devfn) == 4 && pin == 1) {
|
|
/* VT6212 INTA */
|
|
irq = IRQ_IOP32X_XINT1;
|
|
} else if (PCI_SLOT(dev->devfn) == 4 && pin == 2) {
|
|
/* VT6212 INTB */
|
|
irq = IRQ_IOP32X_XINT0;
|
|
} else if (PCI_SLOT(dev->devfn) == 4 && pin == 3) {
|
|
/* VT6212 INTC */
|
|
irq = IRQ_IOP32X_XINT2;
|
|
} else if (PCI_SLOT(dev->devfn) == 5) {
|
|
/* Mini-PCI slot */
|
|
irq = IRQ_IOP32X_XINT3;
|
|
} else {
|
|
printk(KERN_ERR "n2100_pci_map_irq() called for unknown "
|
|
"device PCI:%d:%d:%d\n", dev->bus->number,
|
|
PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
|
|
irq = -1;
|
|
}
|
|
|
|
return irq;
|
|
}
|
|
|
|
static struct hw_pci n2100_pci __initdata = {
|
|
.swizzle = pci_std_swizzle,
|
|
.nr_controllers = 1,
|
|
.setup = iop3xx_pci_setup,
|
|
.preinit = iop3xx_pci_preinit,
|
|
.scan = iop3xx_pci_scan_bus,
|
|
.map_irq = n2100_pci_map_irq,
|
|
};
|
|
|
|
/*
|
|
* Both r8169 chips on the n2100 exhibit PCI parity problems. Set
|
|
* the ->broken_parity_status flag for both ports so that the r8169
|
|
* driver knows it should ignore error interrupts.
|
|
*/
|
|
static void n2100_fixup_r8169(struct pci_dev *dev)
|
|
{
|
|
if (dev->bus->number == 0 &&
|
|
(dev->devfn == PCI_DEVFN(1, 0) ||
|
|
dev->devfn == PCI_DEVFN(2, 0)))
|
|
dev->broken_parity_status = 1;
|
|
}
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_REALTEK, PCI_ANY_ID, n2100_fixup_r8169);
|
|
|
|
static int __init n2100_pci_init(void)
|
|
{
|
|
if (machine_is_n2100())
|
|
pci_common_init(&n2100_pci);
|
|
|
|
return 0;
|
|
}
|
|
|
|
subsys_initcall(n2100_pci_init);
|
|
|
|
|
|
/*
|
|
* N2100 machine initialisation.
|
|
*/
|
|
static struct physmap_flash_data n2100_flash_data = {
|
|
.width = 2,
|
|
};
|
|
|
|
static struct resource n2100_flash_resource = {
|
|
.start = 0xf0000000,
|
|
.end = 0xf0ffffff,
|
|
.flags = IORESOURCE_MEM,
|
|
};
|
|
|
|
static struct platform_device n2100_flash_device = {
|
|
.name = "physmap-flash",
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = &n2100_flash_data,
|
|
},
|
|
.num_resources = 1,
|
|
.resource = &n2100_flash_resource,
|
|
};
|
|
|
|
|
|
static struct plat_serial8250_port n2100_serial_port[] = {
|
|
{
|
|
.mapbase = N2100_UART,
|
|
.membase = (char *)N2100_UART,
|
|
.irq = 0,
|
|
.flags = UPF_SKIP_TEST,
|
|
.iotype = UPIO_MEM,
|
|
.regshift = 0,
|
|
.uartclk = 1843200,
|
|
},
|
|
{ },
|
|
};
|
|
|
|
static struct resource n2100_uart_resource = {
|
|
.start = N2100_UART,
|
|
.end = N2100_UART + 7,
|
|
.flags = IORESOURCE_MEM,
|
|
};
|
|
|
|
static struct platform_device n2100_serial_device = {
|
|
.name = "serial8250",
|
|
.id = PLAT8250_DEV_PLATFORM,
|
|
.dev = {
|
|
.platform_data = n2100_serial_port,
|
|
},
|
|
.num_resources = 1,
|
|
.resource = &n2100_uart_resource,
|
|
};
|
|
|
|
static struct f75375s_platform_data n2100_f75375s = {
|
|
.pwm = { 255, 255 },
|
|
.pwm_enable = { 0, 0 },
|
|
};
|
|
|
|
static struct i2c_board_info __initdata n2100_i2c_devices[] = {
|
|
{
|
|
I2C_BOARD_INFO("rtc-rs5c372", 0x32),
|
|
.type = "rs5c372b",
|
|
},
|
|
{
|
|
I2C_BOARD_INFO("f75375", 0x2e),
|
|
.type = "f75375",
|
|
.platform_data = &n2100_f75375s,
|
|
},
|
|
};
|
|
|
|
/*
|
|
* Pull PCA9532 GPIO #8 low to power off the machine.
|
|
*/
|
|
static void n2100_power_off(void)
|
|
{
|
|
local_irq_disable();
|
|
|
|
/* Start condition, I2C address of PCA9532, write transaction. */
|
|
*IOP3XX_IDBR0 = 0xc0;
|
|
*IOP3XX_ICR0 = 0xe9;
|
|
mdelay(1);
|
|
|
|
/* Write address 0x08. */
|
|
*IOP3XX_IDBR0 = 0x08;
|
|
*IOP3XX_ICR0 = 0xe8;
|
|
mdelay(1);
|
|
|
|
/* Write data 0x01, stop condition. */
|
|
*IOP3XX_IDBR0 = 0x01;
|
|
*IOP3XX_ICR0 = 0xea;
|
|
|
|
while (1)
|
|
;
|
|
}
|
|
|
|
|
|
static struct timer_list power_button_poll_timer;
|
|
|
|
static void power_button_poll(unsigned long dummy)
|
|
{
|
|
if (gpio_line_get(N2100_POWER_BUTTON) == 0) {
|
|
ctrl_alt_del();
|
|
return;
|
|
}
|
|
|
|
power_button_poll_timer.expires = jiffies + (HZ / 10);
|
|
add_timer(&power_button_poll_timer);
|
|
}
|
|
|
|
|
|
static void __init n2100_init_machine(void)
|
|
{
|
|
platform_device_register(&iop3xx_i2c0_device);
|
|
platform_device_register(&n2100_flash_device);
|
|
platform_device_register(&n2100_serial_device);
|
|
platform_device_register(&iop3xx_dma_0_channel);
|
|
platform_device_register(&iop3xx_dma_1_channel);
|
|
|
|
i2c_register_board_info(0, n2100_i2c_devices,
|
|
ARRAY_SIZE(n2100_i2c_devices));
|
|
|
|
pm_power_off = n2100_power_off;
|
|
|
|
init_timer(&power_button_poll_timer);
|
|
power_button_poll_timer.function = power_button_poll;
|
|
power_button_poll_timer.expires = jiffies + (HZ / 10);
|
|
add_timer(&power_button_poll_timer);
|
|
}
|
|
|
|
MACHINE_START(N2100, "Thecus N2100")
|
|
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
|
|
.phys_io = N2100_UART,
|
|
.io_pg_offst = ((N2100_UART) >> 18) & 0xfffc,
|
|
.boot_params = 0xa0000100,
|
|
.map_io = n2100_map_io,
|
|
.init_irq = iop32x_init_irq,
|
|
.timer = &n2100_timer,
|
|
.init_machine = n2100_init_machine,
|
|
MACHINE_END
|