1
linux/sound/soc/codecs/Kconfig
Mark Brown 0c94161580 ALSA: ASoC: Add all CODECs Kconfig option
Allow all the CODEC drivers to be built without a machine driver in order
to facilitate testing of subsystem-wide changes and gain better coverage
from automated testing efforts. This also helps things like the generic
OpenFirmware machine driver for PowerPC.

Currently AC97 CODECs are not included since the current setup relies
on having a controller driver available.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-07-29 21:32:28 +02:00

83 lines
1.8 KiB
Plaintext

config SND_SOC_ALL_CODECS
tristate "Build all ASoC CODEC drivers"
select I2C
select SPI
select SND_SOC_AK4535
select SND_SOC_UDA1380
select SND_SOC_WM8510
select SND_SOC_WM8731
select SND_SOC_WM8750
select SND_SOC_WM8753
select SND_SOC_WM8990
select SND_SOC_CS4270
select SND_SOC_TLV320AIC26
select SND_SOC_TLV320AIC3X
help
Normally ASoC codec drivers are only built if a machine driver which
uses them is also built since they are only usable with a machine
driver. Selecting this option will allow these drivers to be built
without an explicit machine driver for test and development purposes.
If unsure select "N".
config SND_SOC_AC97_CODEC
tristate
select SND_AC97_CODEC
config SND_SOC_AD1980
tristate
config SND_SOC_AK4535
tristate
config SND_SOC_UDA1380
tristate
config SND_SOC_WM8510
tristate
config SND_SOC_WM8731
tristate
config SND_SOC_WM8750
tristate
config SND_SOC_WM8753
tristate
config SND_SOC_WM8990
tristate
config SND_SOC_WM9712
tristate
config SND_SOC_WM9713
tristate
# Cirrus Logic CS4270 Codec
config SND_SOC_CS4270
tristate
# Cirrus Logic CS4270 Codec Hardware Mute Support
# Select if you have external muting circuitry attached to your CS4270.
config SND_SOC_CS4270_HWMUTE
bool
depends on SND_SOC_CS4270
# Cirrus Logic CS4270 Codec VD = 3.3V Errata
# Select if you are affected by the errata where the part will not function
# if MCLK divide-by-1.5 is selected and VD is set to 3.3V. The driver will
# not select any sample rates that require MCLK to be divided by 1.5.
config SND_SOC_CS4270_VD33_ERRATA
bool
depends on SND_SOC_CS4270
config SND_SOC_TLV320AIC26
tristate "TI TLV320AIC26 Codec support"
depends on SND_SOC && SPI
config SND_SOC_TLV320AIC3X
tristate
depends on I2C