1
linux/drivers/gpu/drm/nouveau/nv04_display.c
Ben Skeggs 7f612d87f8 drm/nouveau: use dcb connector table for creating drm connectors
This makes this code common to both the nv04 and nv50 paths.

For the moment, we keep the previous behaviour with HDMI/eDP connectors
and report them as DVI-D/DP instead.  This will be fixed once the rest
of the code has been fixed to deal with those types.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25 15:09:32 +10:00

245 lines
6.4 KiB
C

/*
* Copyright 2009 Red Hat Inc.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
* OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*
* Author: Ben Skeggs
*/
#include "drmP.h"
#include "drm.h"
#include "drm_crtc_helper.h"
#include "nouveau_drv.h"
#include "nouveau_fb.h"
#include "nouveau_hw.h"
#include "nouveau_encoder.h"
#include "nouveau_connector.h"
#define MULTIPLE_ENCODERS(e) (e & (e - 1))
static void
nv04_display_store_initial_head_owner(struct drm_device *dev)
{
struct drm_nouveau_private *dev_priv = dev->dev_private;
if (dev_priv->chipset != 0x11) {
dev_priv->crtc_owner = NVReadVgaCrtc(dev, 0, NV_CIO_CRE_44);
goto ownerknown;
}
/* reading CR44 is broken on nv11, so we attempt to infer it */
if (nvReadMC(dev, NV_PBUS_DEBUG_1) & (1 << 28)) /* heads tied, restore both */
dev_priv->crtc_owner = 0x4;
else {
uint8_t slaved_on_A, slaved_on_B;
bool tvA = false;
bool tvB = false;
NVLockVgaCrtcs(dev, false);
slaved_on_B = NVReadVgaCrtc(dev, 1, NV_CIO_CRE_PIXEL_INDEX) &
0x80;
if (slaved_on_B)
tvB = !(NVReadVgaCrtc(dev, 1, NV_CIO_CRE_LCD__INDEX) &
MASK(NV_CIO_CRE_LCD_LCD_SELECT));
slaved_on_A = NVReadVgaCrtc(dev, 0, NV_CIO_CRE_PIXEL_INDEX) &
0x80;
if (slaved_on_A)
tvA = !(NVReadVgaCrtc(dev, 0, NV_CIO_CRE_LCD__INDEX) &
MASK(NV_CIO_CRE_LCD_LCD_SELECT));
NVLockVgaCrtcs(dev, true);
if (slaved_on_A && !tvA)
dev_priv->crtc_owner = 0x0;
else if (slaved_on_B && !tvB)
dev_priv->crtc_owner = 0x3;
else if (slaved_on_A)
dev_priv->crtc_owner = 0x0;
else if (slaved_on_B)
dev_priv->crtc_owner = 0x3;
else
dev_priv->crtc_owner = 0x0;
}
ownerknown:
NV_INFO(dev, "Initial CRTC_OWNER is %d\n", dev_priv->crtc_owner);
/* we need to ensure the heads are not tied henceforth, or reading any
* 8 bit reg on head B will fail
* setting a single arbitrary head solves that */
NVSetOwner(dev, 0);
}
int
nv04_display_create(struct drm_device *dev)
{
struct drm_nouveau_private *dev_priv = dev->dev_private;
struct dcb_table *dcb = &dev_priv->vbios.dcb;
struct drm_encoder *encoder;
struct drm_crtc *crtc;
int i, ret;
NV_DEBUG_KMS(dev, "\n");
if (nv_two_heads(dev))
nv04_display_store_initial_head_owner(dev);
nouveau_hw_save_vga_fonts(dev, 1);
drm_mode_config_init(dev);
drm_mode_create_scaling_mode_property(dev);
drm_mode_create_dithering_property(dev);
dev->mode_config.funcs = (void *)&nouveau_mode_config_funcs;
dev->mode_config.min_width = 0;
dev->mode_config.min_height = 0;
switch (dev_priv->card_type) {
case NV_04:
dev->mode_config.max_width = 2048;
dev->mode_config.max_height = 2048;
break;
default:
dev->mode_config.max_width = 4096;
dev->mode_config.max_height = 4096;
break;
}
dev->mode_config.fb_base = dev_priv->fb_phys;
nv04_crtc_create(dev, 0);
if (nv_two_heads(dev))
nv04_crtc_create(dev, 1);
for (i = 0; i < dcb->entries; i++) {
struct dcb_entry *dcbent = &dcb->entry[i];
switch (dcbent->type) {
case OUTPUT_ANALOG:
ret = nv04_dac_create(dev, dcbent);
break;
case OUTPUT_LVDS:
case OUTPUT_TMDS:
ret = nv04_dfp_create(dev, dcbent);
break;
case OUTPUT_TV:
if (dcbent->location == DCB_LOC_ON_CHIP)
ret = nv17_tv_create(dev, dcbent);
else
ret = nv04_tv_create(dev, dcbent);
break;
default:
NV_WARN(dev, "DCB type %d not known\n", dcbent->type);
continue;
}
if (ret)
continue;
}
for (i = 0; i < dcb->connector.entries; i++)
nouveau_connector_create(dev, &dcb->connector.entry[i]);
/* Save previous state */
NVLockVgaCrtcs(dev, false);
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head)
crtc->funcs->save(crtc);
list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
struct drm_encoder_helper_funcs *func = encoder->helper_private;
func->save(encoder);
}
return 0;
}
void
nv04_display_destroy(struct drm_device *dev)
{
struct drm_encoder *encoder;
struct drm_crtc *crtc;
NV_DEBUG_KMS(dev, "\n");
/* Turn every CRTC off. */
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
struct drm_mode_set modeset = {
.crtc = crtc,
};
crtc->funcs->set_config(&modeset);
}
/* Restore state */
NVLockVgaCrtcs(dev, false);
list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
struct drm_encoder_helper_funcs *func = encoder->helper_private;
func->restore(encoder);
}
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head)
crtc->funcs->restore(crtc);
drm_mode_config_cleanup(dev);
nouveau_hw_save_vga_fonts(dev, 0);
}
void
nv04_display_restore(struct drm_device *dev)
{
struct drm_nouveau_private *dev_priv = dev->dev_private;
struct drm_encoder *encoder;
struct drm_crtc *crtc;
NVLockVgaCrtcs(dev, false);
/* meh.. modeset apparently doesn't setup all the regs and depends
* on pre-existing state, for now load the state of the card *before*
* nouveau was loaded, and then do a modeset.
*
* best thing to do probably is to make save/restore routines not
* save/restore "pre-load" state, but more general so we can save
* on suspend too.
*/
list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
struct drm_encoder_helper_funcs *func = encoder->helper_private;
func->restore(encoder);
}
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head)
crtc->funcs->restore(crtc);
if (nv_two_heads(dev)) {
NV_INFO(dev, "Restoring CRTC_OWNER to %d.\n",
dev_priv->crtc_owner);
NVSetOwner(dev, dev_priv->crtc_owner);
}
NVLockVgaCrtcs(dev, true);
}