84bbfe6b64
Highlights: - asus-wmi: Add support for vivobook fan profiles - dell-laptop: Add knobs to change battery charge settings - lg-laptop: Add operation region support - intel-uncore-freq: Add support for efficiency latency control - intel/ifs: Add SBAF test support - intel/pmc: Ignore all LTRs during suspend - platform/surface: Support for arm64 based Surface devices - wmi: Pass event data directly to legacy notify handlers - x86/platform/geode: switch GPIO buttons and LEDs to software properties - bunch of small cleanups, fixes, hw-id additions, etc. The following is an automated git shortlog grouped by driver: Documentation: - admin-guide: pm: Add efficiency vs. latency tradeoff to uncore documentation ISST: - Simplify isst_misc_reg() and isst_misc_unreg() MAINTAINERS: - adjust file entry in INTEL MID PLATFORM - Add Intel MID section Merge tag 'hwmon-for-v6.11-rc7' into review-hans: - Merge tag 'hwmon-for-v6.11-rc7' into review-hans Merge tag 'platform-drivers-x86-v6.11-3' into review-hans: - Merge tag 'platform-drivers-x86-v6.11-3' into review-hans acer-wmi: - Use backlight power constants asus-laptop: - Use backlight power constants asus-nb-wmi: - Use backlight power constants asus-wmi: - don't fail if platform_profile already registered - add debug print in more key places - Use backlight power constants - add support for vivobook fan profiles dell-laptop: - remove duplicate code w/ battery function - Add knobs to change battery charge settings dt-bindings: - platform: Add Surface System Aggregator Module - serial: Allow embedded-controller as child node eeepc-laptop: - Use backlight power constants eeepc-wmi: - Use backlight power constants fujitsu-laptop: - Use backlight power constants hid-asus: - use hid for brightness control on keyboard ideapad-laptop: - Make the scope_guard() clear of its scope - move ACPI helpers from header to source file - Use backlight power constants int3472: - Use str_high_low() - Use GPIO_LOOKUP() macro - make common part a separate module intel-hid: - Use string_choices API instead of ternary operator intel/pmc: - Ignore all LTRs during suspend - Remove unused param idx from pmc_for_each_mode() intel_scu_ipc: - Move intel_scu_ipc.h out of arch/x86/include/asm intel_scu_wdt: - Move intel_scu_wdt.h to x86 subfolder lenovo-ymc: - Ignore the 0x0 state lg-laptop: - Add operation region support oaktrail: - Use backlight power constants panasonic-laptop: - Add support for programmable buttons platform/mellanox: - mlxbf-pmc: fix lockdep warning platform/olpc: - Remove redundant null pointer checks in olpc_ec_setup_debugfs() platform/surface: - Add OF support platform/x86/amd: - pmf: Add quirk for TUF Gaming A14 platform/x86/amd/pmf: - Update SMU metrics table for 1AH family series - Relocate CPU ID macros to the PMF header - Add support for notifying Smart PC Solution updates platform/x86/intel-uncore-freq: - Add efficiency latency control to sysfs interface - Add support for efficiency latency control - Do not present separate package-die domain platform/x86/intel/ifs: - Fix SBAF title underline length - Add SBAF test support - Add SBAF test image loading support - Refactor MSR usage in IFS test code platform/x86/intel/pmc: - Show live substate requirements platform/x86/intel/pmt: - Use PMT callbacks platform/x86/intel/vsec: - Add PMT read callbacks platform/x86/intel/vsec.h: - Move to include/linux samsung-laptop: - Use backlight power constants serial-multi-instantiate: - Don't require both I2C and SPI thinkpad_acpi: - Fix uninitialized symbol 's' warning - Add Thinkpad Edge E531 fan support touchscreen_dmi: - add nanote-next quirk trace: - platform/x86/intel/ifs: Add SBAF trace support wmi: - Call both legacy and WMI driver notify handlers - Merge get_event_data() with wmi_get_notify_data() - Remove wmi_get_event_data() - Pass event data directly to legacy notify handlers x86-android-tablets: - Adjust Xiaomi Pad 2 bottom bezel touch buttons LED - Fix spelling in the comments x86/platform/geode: - switch GPIO buttons and LEDs to software properties -----BEGIN PGP SIGNATURE----- iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmbq2tYUHGhkZWdvZWRl QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9xKYAgAoXZt1MjBDA1mP813i4bj8CYQHWO+ YnugVhEccucxgC6sBGzQeRLBNuG/VaBN6tyJ1pKYMpWV5gSthq1Iop+DZbno2ciM QAnSSzioHB/dhYBXuKmZatkMsKLjLjtfcexUed9DfwKapqFl3XQMb6cEYasM37hH 197K4yAFF3oqQImlACwQDxN1q3eCG6bdIbEAByZW7yH644IC5zH8/CiFjTCwUx/F aFIHQlLLzt1kjhD8AbRHhRcsGbzG2ejHsC3yrQddEJSOkInDO8baR0aDyhBTUFPE lztuekFfaJ1Xcyoc/Zf4pi3ab1Djt+Htck3CHLO/xcl0YYMlM5vcs1QlhQ== =sAk7 -----END PGP SIGNATURE----- Merge tag 'platform-drivers-x86-v6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform drivers updates from Hans de Goede: - asus-wmi: Add support for vivobook fan profiles - dell-laptop: Add knobs to change battery charge settings - lg-laptop: Add operation region support - intel-uncore-freq: Add support for efficiency latency control - intel/ifs: Add SBAF test support - intel/pmc: Ignore all LTRs during suspend - platform/surface: Support for arm64 based Surface devices - wmi: Pass event data directly to legacy notify handlers - x86/platform/geode: switch GPIO buttons and LEDs to software properties - bunch of small cleanups, fixes, hw-id additions, etc. * tag 'platform-drivers-x86-v6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (65 commits) MAINTAINERS: adjust file entry in INTEL MID PLATFORM platform/x86: x86-android-tablets: Adjust Xiaomi Pad 2 bottom bezel touch buttons LED platform/mellanox: mlxbf-pmc: fix lockdep warning platform/x86/amd: pmf: Add quirk for TUF Gaming A14 platform/x86: touchscreen_dmi: add nanote-next quirk platform/x86: asus-wmi: don't fail if platform_profile already registered platform/x86: asus-wmi: add debug print in more key places platform/x86: intel_scu_wdt: Move intel_scu_wdt.h to x86 subfolder platform/x86: intel_scu_ipc: Move intel_scu_ipc.h out of arch/x86/include/asm MAINTAINERS: Add Intel MID section platform/x86: panasonic-laptop: Add support for programmable buttons platform/olpc: Remove redundant null pointer checks in olpc_ec_setup_debugfs() platform/x86: intel/pmc: Ignore all LTRs during suspend platform/x86: wmi: Call both legacy and WMI driver notify handlers platform/x86: wmi: Merge get_event_data() with wmi_get_notify_data() platform/x86: wmi: Remove wmi_get_event_data() platform/x86: wmi: Pass event data directly to legacy notify handlers platform/x86: thinkpad_acpi: Fix uninitialized symbol 's' warning platform/x86: x86-android-tablets: Fix spelling in the comments platform/x86: ideapad-laptop: Make the scope_guard() clear of its scope ...
1142 lines
29 KiB
C
1142 lines
29 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Panasonic HotKey and LCD brightness control driver
|
|
* (C) 2004 Hiroshi Miura <miura@da-cha.org>
|
|
* (C) 2004 NTT DATA Intellilink Co. http://www.intellilink.co.jp/
|
|
* (C) YOKOTA Hiroshi <yokota (at) netlab. is. tsukuba. ac. jp>
|
|
* (C) 2004 David Bronaugh <dbronaugh>
|
|
* (C) 2006-2008 Harald Welte <laforge@gnumonks.org>
|
|
*
|
|
* derived from toshiba_acpi.c, Copyright (C) 2002-2004 John Belmonte
|
|
*
|
|
*---------------------------------------------------------------------------
|
|
*
|
|
* ChangeLog:
|
|
* Aug.18, 2020 Kenneth Chan <kenneth.t.chan@gmail.com>
|
|
* -v0.98 add platform devices for firmware brightness registers
|
|
* add support for battery charging threshold (eco mode)
|
|
* resolve hotkey double trigger
|
|
* add write support to mute
|
|
* fix sticky_key init bug
|
|
* fix naming of platform files for consistency with other
|
|
* modules
|
|
* split MODULE_AUTHOR() by one author per macro call
|
|
* replace ACPI prints with pr_*() macros
|
|
* -v0.97 add support for cdpower hardware switch
|
|
* -v0.96 merge Lucina's enhancement
|
|
* Jan.13, 2009 Martin Lucina <mato@kotelna.sk>
|
|
* - add support for optical driver power in
|
|
* Y and W series
|
|
*
|
|
* Sep.23, 2008 Harald Welte <laforge@gnumonks.org>
|
|
* -v0.95 rename driver from drivers/acpi/pcc_acpi.c to
|
|
* drivers/misc/panasonic-laptop.c
|
|
*
|
|
* Jul.04, 2008 Harald Welte <laforge@gnumonks.org>
|
|
* -v0.94 replace /proc interface with device attributes
|
|
* support {set,get}keycode on th input device
|
|
*
|
|
* Jun.27, 2008 Harald Welte <laforge@gnumonks.org>
|
|
* -v0.92 merge with 2.6.26-rc6 input API changes
|
|
* remove broken <= 2.6.15 kernel support
|
|
* resolve all compiler warnings
|
|
* various coding style fixes (checkpatch.pl)
|
|
* add support for backlight api
|
|
* major code restructuring
|
|
*
|
|
* Dac.28, 2007 Harald Welte <laforge@gnumonks.org>
|
|
* -v0.91 merge with 2.6.24-rc6 ACPI changes
|
|
*
|
|
* Nov.04, 2006 Hiroshi Miura <miura@da-cha.org>
|
|
* -v0.9 remove warning about section reference.
|
|
* remove acpi_os_free
|
|
* add /proc/acpi/pcc/brightness interface for HAL access
|
|
* merge dbronaugh's enhancement
|
|
* Aug.17, 2004 David Bronaugh (dbronaugh)
|
|
* - Added screen brightness setting interface
|
|
* Thanks to FreeBSD crew (acpi_panasonic.c)
|
|
* for the ideas I needed to accomplish it
|
|
*
|
|
* May.29, 2006 Hiroshi Miura <miura@da-cha.org>
|
|
* -v0.8.4 follow to change keyinput structure
|
|
* thanks Fabian Yamaguchi <fabs@cs.tu-berlin.de>,
|
|
* Jacob Bower <jacob.bower@ic.ac.uk> and
|
|
* Hiroshi Yokota for providing solutions.
|
|
*
|
|
* Oct.02, 2004 Hiroshi Miura <miura@da-cha.org>
|
|
* -v0.8.2 merge code of YOKOTA Hiroshi
|
|
* <yokota@netlab.is.tsukuba.ac.jp>.
|
|
* Add sticky key mode interface.
|
|
* Refactoring acpi_pcc_generate_keyinput().
|
|
*
|
|
* Sep.15, 2004 Hiroshi Miura <miura@da-cha.org>
|
|
* -v0.8 Generate key input event on input subsystem.
|
|
* This is based on yet another driver written by
|
|
* Ryuta Nakanishi.
|
|
*
|
|
* Sep.10, 2004 Hiroshi Miura <miura@da-cha.org>
|
|
* -v0.7 Change proc interface functions using seq_file
|
|
* facility as same as other ACPI drivers.
|
|
*
|
|
* Aug.28, 2004 Hiroshi Miura <miura@da-cha.org>
|
|
* -v0.6.4 Fix a silly error with status checking
|
|
*
|
|
* Aug.25, 2004 Hiroshi Miura <miura@da-cha.org>
|
|
* -v0.6.3 replace read_acpi_int by standard function
|
|
* acpi_evaluate_integer
|
|
* some clean up and make smart copyright notice.
|
|
* fix return value of pcc_acpi_get_key()
|
|
* fix checking return value of acpi_bus_register_driver()
|
|
*
|
|
* Aug.22, 2004 David Bronaugh <dbronaugh@linuxboxen.org>
|
|
* -v0.6.2 Add check on ACPI data (num_sifr)
|
|
* Coding style cleanups, better error messages/handling
|
|
* Fixed an off-by-one error in memory allocation
|
|
*
|
|
* Aug.21, 2004 David Bronaugh <dbronaugh@linuxboxen.org>
|
|
* -v0.6.1 Fix a silly error with status checking
|
|
*
|
|
* Aug.20, 2004 David Bronaugh <dbronaugh@linuxboxen.org>
|
|
* - v0.6 Correct brightness controls to reflect reality
|
|
* based on information gleaned by Hiroshi Miura
|
|
* and discussions with Hiroshi Miura
|
|
*
|
|
* Aug.10, 2004 Hiroshi Miura <miura@da-cha.org>
|
|
* - v0.5 support LCD brightness control
|
|
* based on the disclosed information by MEI.
|
|
*
|
|
* Jul.25, 2004 Hiroshi Miura <miura@da-cha.org>
|
|
* - v0.4 first post version
|
|
* add function to retrive SIFR
|
|
*
|
|
* Jul.24, 2004 Hiroshi Miura <miura@da-cha.org>
|
|
* - v0.3 get proper status of hotkey
|
|
*
|
|
* Jul.22, 2004 Hiroshi Miura <miura@da-cha.org>
|
|
* - v0.2 add HotKey handler
|
|
*
|
|
* Jul.17, 2004 Hiroshi Miura <miura@da-cha.org>
|
|
* - v0.1 start from toshiba_acpi driver written by John Belmonte
|
|
*/
|
|
|
|
#include <linux/acpi.h>
|
|
#include <linux/backlight.h>
|
|
#include <linux/bits.h>
|
|
#include <linux/ctype.h>
|
|
#include <linux/i8042.h>
|
|
#include <linux/init.h>
|
|
#include <linux/input.h>
|
|
#include <linux/input/sparse-keymap.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/seq_file.h>
|
|
#include <linux/serio.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/types.h>
|
|
#include <linux/uaccess.h>
|
|
#include <acpi/video.h>
|
|
|
|
MODULE_AUTHOR("Hiroshi Miura <miura@da-cha.org>");
|
|
MODULE_AUTHOR("David Bronaugh <dbronaugh@linuxboxen.org>");
|
|
MODULE_AUTHOR("Harald Welte <laforge@gnumonks.org>");
|
|
MODULE_AUTHOR("Martin Lucina <mato@kotelna.sk>");
|
|
MODULE_AUTHOR("Kenneth Chan <kenneth.t.chan@gmail.com>");
|
|
MODULE_DESCRIPTION("ACPI HotKey driver for Panasonic Let's Note laptops");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
#define LOGPREFIX "pcc_acpi: "
|
|
|
|
/* Define ACPI PATHs */
|
|
/* Lets note hotkeys */
|
|
#define METHOD_HKEY_QUERY "HINF"
|
|
#define METHOD_HKEY_SQTY "SQTY"
|
|
#define METHOD_HKEY_SINF "SINF"
|
|
#define METHOD_HKEY_SSET "SSET"
|
|
#define METHOD_ECWR "\\_SB.ECWR"
|
|
#define HKEY_NOTIFY 0x80
|
|
#define ECO_MODE_OFF 0x00
|
|
#define ECO_MODE_ON 0x80
|
|
|
|
#define ACPI_PCC_DRIVER_NAME "Panasonic Laptop Support"
|
|
#define ACPI_PCC_DEVICE_NAME "Hotkey"
|
|
#define ACPI_PCC_CLASS "pcc"
|
|
|
|
#define ACPI_PCC_INPUT_PHYS "panasonic/hkey0"
|
|
|
|
/* LCD_TYPEs: 0 = Normal, 1 = Semi-transparent
|
|
ECO_MODEs: 0x03 = off, 0x83 = on
|
|
*/
|
|
enum SINF_BITS { SINF_NUM_BATTERIES = 0,
|
|
SINF_LCD_TYPE,
|
|
SINF_AC_MAX_BRIGHT,
|
|
SINF_AC_MIN_BRIGHT,
|
|
SINF_AC_CUR_BRIGHT,
|
|
SINF_DC_MAX_BRIGHT,
|
|
SINF_DC_MIN_BRIGHT,
|
|
SINF_DC_CUR_BRIGHT,
|
|
SINF_MUTE,
|
|
SINF_RESERVED,
|
|
SINF_ECO_MODE = 0x0A,
|
|
SINF_CUR_BRIGHT = 0x0D,
|
|
SINF_STICKY_KEY = 0x80,
|
|
};
|
|
/* R1 handles SINF_AC_CUR_BRIGHT as SINF_CUR_BRIGHT, doesn't know AC state */
|
|
|
|
static int acpi_pcc_hotkey_add(struct acpi_device *device);
|
|
static void acpi_pcc_hotkey_remove(struct acpi_device *device);
|
|
static void acpi_pcc_hotkey_notify(struct acpi_device *device, u32 event);
|
|
|
|
static const struct acpi_device_id pcc_device_ids[] = {
|
|
{ "MAT0012", 0},
|
|
{ "MAT0013", 0},
|
|
{ "MAT0018", 0},
|
|
{ "MAT0019", 0},
|
|
{ "", 0},
|
|
};
|
|
MODULE_DEVICE_TABLE(acpi, pcc_device_ids);
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int acpi_pcc_hotkey_resume(struct device *dev);
|
|
#endif
|
|
static SIMPLE_DEV_PM_OPS(acpi_pcc_hotkey_pm, NULL, acpi_pcc_hotkey_resume);
|
|
|
|
static struct acpi_driver acpi_pcc_driver = {
|
|
.name = ACPI_PCC_DRIVER_NAME,
|
|
.class = ACPI_PCC_CLASS,
|
|
.ids = pcc_device_ids,
|
|
.ops = {
|
|
.add = acpi_pcc_hotkey_add,
|
|
.remove = acpi_pcc_hotkey_remove,
|
|
.notify = acpi_pcc_hotkey_notify,
|
|
},
|
|
.drv.pm = &acpi_pcc_hotkey_pm,
|
|
};
|
|
|
|
static const struct key_entry panasonic_keymap[] = {
|
|
{ KE_KEY, 0, { KEY_RESERVED } },
|
|
{ KE_KEY, 1, { KEY_BRIGHTNESSDOWN } },
|
|
{ KE_KEY, 2, { KEY_BRIGHTNESSUP } },
|
|
{ KE_KEY, 3, { KEY_DISPLAYTOGGLE } },
|
|
{ KE_KEY, 4, { KEY_MUTE } },
|
|
{ KE_KEY, 5, { KEY_VOLUMEDOWN } },
|
|
{ KE_KEY, 6, { KEY_VOLUMEUP } },
|
|
{ KE_KEY, 7, { KEY_SLEEP } },
|
|
{ KE_KEY, 8, { KEY_PROG1 } }, /* Change CPU boost */
|
|
{ KE_KEY, 9, { KEY_BATTERY } },
|
|
{ KE_KEY, 10, { KEY_SUSPEND } },
|
|
{ KE_KEY, 21, { KEY_MACRO1 } },
|
|
{ KE_KEY, 22, { KEY_MACRO2 } },
|
|
{ KE_KEY, 24, { KEY_MACRO3 } },
|
|
{ KE_KEY, 25, { KEY_MACRO4 } },
|
|
{ KE_KEY, 34, { KEY_MACRO5 } },
|
|
{ KE_KEY, 35, { KEY_MACRO6 } },
|
|
{ KE_KEY, 36, { KEY_MACRO7 } },
|
|
{ KE_KEY, 37, { KEY_MACRO8 } },
|
|
{ KE_KEY, 41, { KEY_MACRO9 } },
|
|
{ KE_KEY, 42, { KEY_MACRO10 } },
|
|
{ KE_KEY, 43, { KEY_MACRO11 } },
|
|
{ KE_END, 0 }
|
|
};
|
|
|
|
struct pcc_acpi {
|
|
acpi_handle handle;
|
|
unsigned long num_sifr;
|
|
int sticky_key;
|
|
int eco_mode;
|
|
int mute;
|
|
int ac_brightness;
|
|
int dc_brightness;
|
|
int current_brightness;
|
|
u32 *sinf;
|
|
struct acpi_device *device;
|
|
struct input_dev *input_dev;
|
|
struct backlight_device *backlight;
|
|
struct platform_device *platform;
|
|
};
|
|
|
|
/*
|
|
* On some Panasonic models the volume up / down / mute keys send duplicate
|
|
* keypress events over the PS/2 kbd interface, filter these out.
|
|
*/
|
|
static bool panasonic_i8042_filter(unsigned char data, unsigned char str,
|
|
struct serio *port)
|
|
{
|
|
static bool extended;
|
|
|
|
if (str & I8042_STR_AUXDATA)
|
|
return false;
|
|
|
|
if (data == 0xe0) {
|
|
extended = true;
|
|
return true;
|
|
} else if (extended) {
|
|
extended = false;
|
|
|
|
switch (data & 0x7f) {
|
|
case 0x20: /* e0 20 / e0 a0, Volume Mute press / release */
|
|
case 0x2e: /* e0 2e / e0 ae, Volume Down press / release */
|
|
case 0x30: /* e0 30 / e0 b0, Volume Up press / release */
|
|
return true;
|
|
default:
|
|
/*
|
|
* Report the previously filtered e0 before continuing
|
|
* with the next non-filtered byte.
|
|
*/
|
|
serio_interrupt(port, 0xe0, 0);
|
|
return false;
|
|
}
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
/* method access functions */
|
|
static int acpi_pcc_write_sset(struct pcc_acpi *pcc, int func, int val)
|
|
{
|
|
union acpi_object in_objs[] = {
|
|
{ .integer.type = ACPI_TYPE_INTEGER,
|
|
.integer.value = func, },
|
|
{ .integer.type = ACPI_TYPE_INTEGER,
|
|
.integer.value = val, },
|
|
};
|
|
struct acpi_object_list params = {
|
|
.count = ARRAY_SIZE(in_objs),
|
|
.pointer = in_objs,
|
|
};
|
|
acpi_status status = AE_OK;
|
|
|
|
status = acpi_evaluate_object(pcc->handle, METHOD_HKEY_SSET,
|
|
¶ms, NULL);
|
|
|
|
return (status == AE_OK) ? 0 : -EIO;
|
|
}
|
|
|
|
static inline int acpi_pcc_get_sqty(struct acpi_device *device)
|
|
{
|
|
unsigned long long s;
|
|
acpi_status status;
|
|
|
|
status = acpi_evaluate_integer(device->handle, METHOD_HKEY_SQTY,
|
|
NULL, &s);
|
|
if (ACPI_SUCCESS(status))
|
|
return s;
|
|
else {
|
|
pr_err("evaluation error HKEY.SQTY\n");
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static int acpi_pcc_retrieve_biosdata(struct pcc_acpi *pcc)
|
|
{
|
|
acpi_status status;
|
|
struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
|
|
union acpi_object *hkey = NULL;
|
|
int i;
|
|
|
|
status = acpi_evaluate_object(pcc->handle, METHOD_HKEY_SINF, NULL,
|
|
&buffer);
|
|
if (ACPI_FAILURE(status)) {
|
|
pr_err("evaluation error HKEY.SINF\n");
|
|
return 0;
|
|
}
|
|
|
|
hkey = buffer.pointer;
|
|
if (!hkey || (hkey->type != ACPI_TYPE_PACKAGE)) {
|
|
pr_err("Invalid HKEY.SINF\n");
|
|
status = AE_ERROR;
|
|
goto end;
|
|
}
|
|
|
|
if (pcc->num_sifr < hkey->package.count) {
|
|
pr_err("SQTY reports bad SINF length SQTY: %lu SINF-pkg-count: %u\n",
|
|
pcc->num_sifr, hkey->package.count);
|
|
status = AE_ERROR;
|
|
goto end;
|
|
}
|
|
|
|
for (i = 0; i < hkey->package.count; i++) {
|
|
union acpi_object *element = &(hkey->package.elements[i]);
|
|
if (likely(element->type == ACPI_TYPE_INTEGER)) {
|
|
pcc->sinf[i] = element->integer.value;
|
|
} else
|
|
pr_err("Invalid HKEY.SINF data\n");
|
|
}
|
|
pcc->sinf[hkey->package.count] = -1;
|
|
|
|
end:
|
|
kfree(buffer.pointer);
|
|
return status == AE_OK;
|
|
}
|
|
|
|
/* backlight API interface functions */
|
|
|
|
/* This driver currently treats AC and DC brightness identical,
|
|
* since we don't need to invent an interface to the core ACPI
|
|
* logic to receive events in case a power supply is plugged in
|
|
* or removed */
|
|
|
|
static int bl_get(struct backlight_device *bd)
|
|
{
|
|
struct pcc_acpi *pcc = bl_get_data(bd);
|
|
|
|
if (!acpi_pcc_retrieve_biosdata(pcc))
|
|
return -EIO;
|
|
|
|
return pcc->sinf[SINF_AC_CUR_BRIGHT];
|
|
}
|
|
|
|
static int bl_set_status(struct backlight_device *bd)
|
|
{
|
|
struct pcc_acpi *pcc = bl_get_data(bd);
|
|
int bright = bd->props.brightness;
|
|
int rc;
|
|
|
|
if (!acpi_pcc_retrieve_biosdata(pcc))
|
|
return -EIO;
|
|
|
|
if (bright < pcc->sinf[SINF_AC_MIN_BRIGHT])
|
|
bright = pcc->sinf[SINF_AC_MIN_BRIGHT];
|
|
|
|
if (bright < pcc->sinf[SINF_DC_MIN_BRIGHT])
|
|
bright = pcc->sinf[SINF_DC_MIN_BRIGHT];
|
|
|
|
if (bright < pcc->sinf[SINF_AC_MIN_BRIGHT] ||
|
|
bright > pcc->sinf[SINF_AC_MAX_BRIGHT])
|
|
return -EINVAL;
|
|
|
|
rc = acpi_pcc_write_sset(pcc, SINF_AC_CUR_BRIGHT, bright);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
return acpi_pcc_write_sset(pcc, SINF_DC_CUR_BRIGHT, bright);
|
|
}
|
|
|
|
static const struct backlight_ops pcc_backlight_ops = {
|
|
.get_brightness = bl_get,
|
|
.update_status = bl_set_status,
|
|
};
|
|
|
|
|
|
/* returns ACPI_SUCCESS if methods to control optical drive are present */
|
|
|
|
static acpi_status check_optd_present(void)
|
|
{
|
|
acpi_status status = AE_OK;
|
|
acpi_handle handle;
|
|
|
|
status = acpi_get_handle(NULL, "\\_SB.STAT", &handle);
|
|
if (ACPI_FAILURE(status))
|
|
goto out;
|
|
status = acpi_get_handle(NULL, "\\_SB.FBAY", &handle);
|
|
if (ACPI_FAILURE(status))
|
|
goto out;
|
|
status = acpi_get_handle(NULL, "\\_SB.CDDI", &handle);
|
|
if (ACPI_FAILURE(status))
|
|
goto out;
|
|
|
|
out:
|
|
return status;
|
|
}
|
|
|
|
/* get optical driver power state */
|
|
|
|
static int get_optd_power_state(void)
|
|
{
|
|
acpi_status status;
|
|
unsigned long long state;
|
|
int result;
|
|
|
|
status = acpi_evaluate_integer(NULL, "\\_SB.STAT", NULL, &state);
|
|
if (ACPI_FAILURE(status)) {
|
|
pr_err("evaluation error _SB.STAT\n");
|
|
result = -EIO;
|
|
goto out;
|
|
}
|
|
switch (state) {
|
|
case 0: /* power off */
|
|
result = 0;
|
|
break;
|
|
case 0x0f: /* power on */
|
|
result = 1;
|
|
break;
|
|
default:
|
|
result = -EIO;
|
|
break;
|
|
}
|
|
|
|
out:
|
|
return result;
|
|
}
|
|
|
|
/* set optical drive power state */
|
|
|
|
static int set_optd_power_state(int new_state)
|
|
{
|
|
int result;
|
|
acpi_status status;
|
|
|
|
result = get_optd_power_state();
|
|
if (result < 0)
|
|
goto out;
|
|
if (new_state == result)
|
|
goto out;
|
|
|
|
switch (new_state) {
|
|
case 0: /* power off */
|
|
/* Call CDDR instead, since they both call the same method
|
|
* while CDDI takes 1 arg and we are not quite sure what it is.
|
|
*/
|
|
status = acpi_evaluate_object(NULL, "\\_SB.CDDR", NULL, NULL);
|
|
if (ACPI_FAILURE(status)) {
|
|
pr_err("evaluation error _SB.CDDR\n");
|
|
result = -EIO;
|
|
}
|
|
break;
|
|
case 1: /* power on */
|
|
status = acpi_evaluate_object(NULL, "\\_SB.FBAY", NULL, NULL);
|
|
if (ACPI_FAILURE(status)) {
|
|
pr_err("evaluation error _SB.FBAY\n");
|
|
result = -EIO;
|
|
}
|
|
break;
|
|
default:
|
|
result = -EINVAL;
|
|
break;
|
|
}
|
|
|
|
out:
|
|
return result;
|
|
}
|
|
|
|
|
|
/* sysfs user interface functions */
|
|
|
|
static ssize_t numbatt_show(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct acpi_device *acpi = to_acpi_device(dev);
|
|
struct pcc_acpi *pcc = acpi_driver_data(acpi);
|
|
|
|
if (!acpi_pcc_retrieve_biosdata(pcc))
|
|
return -EIO;
|
|
|
|
return sysfs_emit(buf, "%u\n", pcc->sinf[SINF_NUM_BATTERIES]);
|
|
}
|
|
|
|
static ssize_t lcdtype_show(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct acpi_device *acpi = to_acpi_device(dev);
|
|
struct pcc_acpi *pcc = acpi_driver_data(acpi);
|
|
|
|
if (!acpi_pcc_retrieve_biosdata(pcc))
|
|
return -EIO;
|
|
|
|
return sysfs_emit(buf, "%u\n", pcc->sinf[SINF_LCD_TYPE]);
|
|
}
|
|
|
|
static ssize_t mute_show(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct acpi_device *acpi = to_acpi_device(dev);
|
|
struct pcc_acpi *pcc = acpi_driver_data(acpi);
|
|
|
|
if (!acpi_pcc_retrieve_biosdata(pcc))
|
|
return -EIO;
|
|
|
|
return sysfs_emit(buf, "%u\n", pcc->sinf[SINF_MUTE]);
|
|
}
|
|
|
|
static ssize_t mute_store(struct device *dev, struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct acpi_device *acpi = to_acpi_device(dev);
|
|
struct pcc_acpi *pcc = acpi_driver_data(acpi);
|
|
int err, val;
|
|
|
|
err = kstrtoint(buf, 0, &val);
|
|
if (err)
|
|
return err;
|
|
if (val == 0 || val == 1) {
|
|
acpi_pcc_write_sset(pcc, SINF_MUTE, val);
|
|
pcc->mute = val;
|
|
}
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t sticky_key_show(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct acpi_device *acpi = to_acpi_device(dev);
|
|
struct pcc_acpi *pcc = acpi_driver_data(acpi);
|
|
|
|
if (!acpi_pcc_retrieve_biosdata(pcc))
|
|
return -EIO;
|
|
|
|
return sysfs_emit(buf, "%u\n", pcc->sticky_key);
|
|
}
|
|
|
|
static ssize_t sticky_key_store(struct device *dev, struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct acpi_device *acpi = to_acpi_device(dev);
|
|
struct pcc_acpi *pcc = acpi_driver_data(acpi);
|
|
int err, val;
|
|
|
|
err = kstrtoint(buf, 0, &val);
|
|
if (err)
|
|
return err;
|
|
if (val == 0 || val == 1) {
|
|
acpi_pcc_write_sset(pcc, SINF_STICKY_KEY, val);
|
|
pcc->sticky_key = val;
|
|
}
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t eco_mode_show(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct acpi_device *acpi = to_acpi_device(dev);
|
|
struct pcc_acpi *pcc = acpi_driver_data(acpi);
|
|
int result;
|
|
|
|
if (!acpi_pcc_retrieve_biosdata(pcc))
|
|
return -EIO;
|
|
|
|
switch (pcc->sinf[SINF_ECO_MODE]) {
|
|
case (ECO_MODE_OFF + 3):
|
|
result = 0;
|
|
break;
|
|
case (ECO_MODE_ON + 3):
|
|
result = 1;
|
|
break;
|
|
default:
|
|
result = -EIO;
|
|
break;
|
|
}
|
|
return sysfs_emit(buf, "%u\n", result);
|
|
}
|
|
|
|
static ssize_t eco_mode_store(struct device *dev, struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct acpi_device *acpi = to_acpi_device(dev);
|
|
struct pcc_acpi *pcc = acpi_driver_data(acpi);
|
|
int err, state;
|
|
|
|
union acpi_object param[2];
|
|
struct acpi_object_list input;
|
|
acpi_status status;
|
|
|
|
param[0].type = ACPI_TYPE_INTEGER;
|
|
param[0].integer.value = 0x15;
|
|
param[1].type = ACPI_TYPE_INTEGER;
|
|
input.count = 2;
|
|
input.pointer = param;
|
|
|
|
err = kstrtoint(buf, 0, &state);
|
|
if (err)
|
|
return err;
|
|
|
|
switch (state) {
|
|
case 0:
|
|
param[1].integer.value = ECO_MODE_OFF;
|
|
pcc->sinf[SINF_ECO_MODE] = 0;
|
|
pcc->eco_mode = 0;
|
|
break;
|
|
case 1:
|
|
param[1].integer.value = ECO_MODE_ON;
|
|
pcc->sinf[SINF_ECO_MODE] = 1;
|
|
pcc->eco_mode = 1;
|
|
break;
|
|
default:
|
|
/* nothing to do */
|
|
return count;
|
|
}
|
|
|
|
status = acpi_evaluate_object(NULL, METHOD_ECWR,
|
|
&input, NULL);
|
|
if (ACPI_FAILURE(status)) {
|
|
pr_err("%s evaluation failed\n", METHOD_ECWR);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t ac_brightness_show(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct acpi_device *acpi = to_acpi_device(dev);
|
|
struct pcc_acpi *pcc = acpi_driver_data(acpi);
|
|
|
|
if (!acpi_pcc_retrieve_biosdata(pcc))
|
|
return -EIO;
|
|
|
|
return sysfs_emit(buf, "%u\n", pcc->sinf[SINF_AC_CUR_BRIGHT]);
|
|
}
|
|
|
|
static ssize_t ac_brightness_store(struct device *dev, struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct acpi_device *acpi = to_acpi_device(dev);
|
|
struct pcc_acpi *pcc = acpi_driver_data(acpi);
|
|
int err, val;
|
|
|
|
err = kstrtoint(buf, 0, &val);
|
|
if (err)
|
|
return err;
|
|
if (val >= 0 && val <= 255) {
|
|
acpi_pcc_write_sset(pcc, SINF_AC_CUR_BRIGHT, val);
|
|
pcc->ac_brightness = val;
|
|
}
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t dc_brightness_show(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct acpi_device *acpi = to_acpi_device(dev);
|
|
struct pcc_acpi *pcc = acpi_driver_data(acpi);
|
|
|
|
if (!acpi_pcc_retrieve_biosdata(pcc))
|
|
return -EIO;
|
|
|
|
return sysfs_emit(buf, "%u\n", pcc->sinf[SINF_DC_CUR_BRIGHT]);
|
|
}
|
|
|
|
static ssize_t dc_brightness_store(struct device *dev, struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct acpi_device *acpi = to_acpi_device(dev);
|
|
struct pcc_acpi *pcc = acpi_driver_data(acpi);
|
|
int err, val;
|
|
|
|
err = kstrtoint(buf, 0, &val);
|
|
if (err)
|
|
return err;
|
|
if (val >= 0 && val <= 255) {
|
|
acpi_pcc_write_sset(pcc, SINF_DC_CUR_BRIGHT, val);
|
|
pcc->dc_brightness = val;
|
|
}
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t current_brightness_show(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct acpi_device *acpi = to_acpi_device(dev);
|
|
struct pcc_acpi *pcc = acpi_driver_data(acpi);
|
|
|
|
if (!acpi_pcc_retrieve_biosdata(pcc))
|
|
return -EIO;
|
|
|
|
return sysfs_emit(buf, "%u\n", pcc->sinf[SINF_CUR_BRIGHT]);
|
|
}
|
|
|
|
static ssize_t current_brightness_store(struct device *dev, struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct acpi_device *acpi = to_acpi_device(dev);
|
|
struct pcc_acpi *pcc = acpi_driver_data(acpi);
|
|
int err, val;
|
|
|
|
err = kstrtoint(buf, 0, &val);
|
|
if (err)
|
|
return err;
|
|
|
|
if (val >= 0 && val <= 255) {
|
|
err = acpi_pcc_write_sset(pcc, SINF_CUR_BRIGHT, val);
|
|
pcc->current_brightness = val;
|
|
}
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t cdpower_show(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
return sysfs_emit(buf, "%d\n", get_optd_power_state());
|
|
}
|
|
|
|
static ssize_t cdpower_store(struct device *dev, struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
int err, val;
|
|
|
|
err = kstrtoint(buf, 10, &val);
|
|
if (err)
|
|
return err;
|
|
set_optd_power_state(val);
|
|
return count;
|
|
}
|
|
|
|
static DEVICE_ATTR_RO(numbatt);
|
|
static DEVICE_ATTR_RO(lcdtype);
|
|
static DEVICE_ATTR_RW(mute);
|
|
static DEVICE_ATTR_RW(sticky_key);
|
|
static DEVICE_ATTR_RW(eco_mode);
|
|
static DEVICE_ATTR_RW(ac_brightness);
|
|
static DEVICE_ATTR_RW(dc_brightness);
|
|
static DEVICE_ATTR_RW(current_brightness);
|
|
static DEVICE_ATTR_RW(cdpower);
|
|
|
|
static umode_t pcc_sysfs_is_visible(struct kobject *kobj, struct attribute *attr, int idx)
|
|
{
|
|
struct device *dev = kobj_to_dev(kobj);
|
|
struct acpi_device *acpi = to_acpi_device(dev);
|
|
struct pcc_acpi *pcc = acpi_driver_data(acpi);
|
|
|
|
if (attr == &dev_attr_mute.attr)
|
|
return (pcc->num_sifr > SINF_MUTE) ? attr->mode : 0;
|
|
|
|
if (attr == &dev_attr_eco_mode.attr)
|
|
return (pcc->num_sifr > SINF_ECO_MODE) ? attr->mode : 0;
|
|
|
|
if (attr == &dev_attr_current_brightness.attr)
|
|
return (pcc->num_sifr > SINF_CUR_BRIGHT) ? attr->mode : 0;
|
|
|
|
return attr->mode;
|
|
}
|
|
|
|
static struct attribute *pcc_sysfs_entries[] = {
|
|
&dev_attr_numbatt.attr,
|
|
&dev_attr_lcdtype.attr,
|
|
&dev_attr_mute.attr,
|
|
&dev_attr_sticky_key.attr,
|
|
&dev_attr_eco_mode.attr,
|
|
&dev_attr_ac_brightness.attr,
|
|
&dev_attr_dc_brightness.attr,
|
|
&dev_attr_current_brightness.attr,
|
|
&dev_attr_cdpower.attr,
|
|
NULL,
|
|
};
|
|
|
|
static const struct attribute_group pcc_attr_group = {
|
|
.name = NULL, /* put in device directory */
|
|
.attrs = pcc_sysfs_entries,
|
|
.is_visible = pcc_sysfs_is_visible,
|
|
};
|
|
|
|
|
|
/* hotkey input device driver */
|
|
|
|
static int sleep_keydown_seen;
|
|
static void acpi_pcc_generate_keyinput(struct pcc_acpi *pcc)
|
|
{
|
|
struct input_dev *hotk_input_dev = pcc->input_dev;
|
|
int rc;
|
|
unsigned long long result;
|
|
unsigned int key;
|
|
unsigned int updown;
|
|
|
|
rc = acpi_evaluate_integer(pcc->handle, METHOD_HKEY_QUERY,
|
|
NULL, &result);
|
|
if (ACPI_FAILURE(rc)) {
|
|
pr_err("error getting hotkey status\n");
|
|
return;
|
|
}
|
|
|
|
key = result & GENMASK(6, 0);
|
|
updown = result & BIT(7); /* 0x80 == key down; 0x00 = key up */
|
|
|
|
/* hack: some firmware sends no key down for sleep / hibernate */
|
|
if (key == 7 || key == 10) {
|
|
if (updown)
|
|
sleep_keydown_seen = 1;
|
|
if (!sleep_keydown_seen)
|
|
sparse_keymap_report_event(hotk_input_dev,
|
|
key, 0x80, false);
|
|
}
|
|
|
|
/*
|
|
* Don't report brightness key-presses if they are also reported
|
|
* by the ACPI video bus.
|
|
*/
|
|
if ((key == 1 || key == 2) && acpi_video_handles_brightness_key_presses())
|
|
return;
|
|
|
|
if (!sparse_keymap_report_event(hotk_input_dev, key, updown, false))
|
|
pr_err("Unknown hotkey event: 0x%04llx\n", result);
|
|
}
|
|
|
|
static void acpi_pcc_hotkey_notify(struct acpi_device *device, u32 event)
|
|
{
|
|
struct pcc_acpi *pcc = acpi_driver_data(device);
|
|
|
|
switch (event) {
|
|
case HKEY_NOTIFY:
|
|
acpi_pcc_generate_keyinput(pcc);
|
|
break;
|
|
default:
|
|
/* nothing to do */
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void pcc_optd_notify(acpi_handle handle, u32 event, void *data)
|
|
{
|
|
if (event != ACPI_NOTIFY_EJECT_REQUEST)
|
|
return;
|
|
|
|
set_optd_power_state(0);
|
|
}
|
|
|
|
static int pcc_register_optd_notifier(struct pcc_acpi *pcc, char *node)
|
|
{
|
|
acpi_status status;
|
|
acpi_handle handle;
|
|
|
|
status = acpi_get_handle(NULL, node, &handle);
|
|
|
|
if (ACPI_SUCCESS(status)) {
|
|
status = acpi_install_notify_handler(handle,
|
|
ACPI_SYSTEM_NOTIFY,
|
|
pcc_optd_notify, pcc);
|
|
if (ACPI_FAILURE(status))
|
|
pr_err("Failed to register notify on %s\n", node);
|
|
} else
|
|
return -ENODEV;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void pcc_unregister_optd_notifier(struct pcc_acpi *pcc, char *node)
|
|
{
|
|
acpi_status status = AE_OK;
|
|
acpi_handle handle;
|
|
|
|
status = acpi_get_handle(NULL, node, &handle);
|
|
|
|
if (ACPI_SUCCESS(status)) {
|
|
status = acpi_remove_notify_handler(handle,
|
|
ACPI_SYSTEM_NOTIFY,
|
|
pcc_optd_notify);
|
|
if (ACPI_FAILURE(status))
|
|
pr_err("Error removing optd notify handler %s\n",
|
|
node);
|
|
}
|
|
}
|
|
|
|
static int acpi_pcc_init_input(struct pcc_acpi *pcc)
|
|
{
|
|
struct input_dev *input_dev;
|
|
int error;
|
|
|
|
input_dev = input_allocate_device();
|
|
if (!input_dev)
|
|
return -ENOMEM;
|
|
|
|
input_dev->name = ACPI_PCC_DRIVER_NAME;
|
|
input_dev->phys = ACPI_PCC_INPUT_PHYS;
|
|
input_dev->id.bustype = BUS_HOST;
|
|
input_dev->id.vendor = 0x0001;
|
|
input_dev->id.product = 0x0001;
|
|
input_dev->id.version = 0x0100;
|
|
|
|
error = sparse_keymap_setup(input_dev, panasonic_keymap, NULL);
|
|
if (error) {
|
|
pr_err("Unable to setup input device keymap\n");
|
|
goto err_free_dev;
|
|
}
|
|
|
|
error = input_register_device(input_dev);
|
|
if (error) {
|
|
pr_err("Unable to register input device\n");
|
|
goto err_free_dev;
|
|
}
|
|
|
|
pcc->input_dev = input_dev;
|
|
return 0;
|
|
|
|
err_free_dev:
|
|
input_free_device(input_dev);
|
|
return error;
|
|
}
|
|
|
|
/* kernel module interface */
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int acpi_pcc_hotkey_resume(struct device *dev)
|
|
{
|
|
struct pcc_acpi *pcc;
|
|
|
|
if (!dev)
|
|
return -EINVAL;
|
|
|
|
pcc = acpi_driver_data(to_acpi_device(dev));
|
|
if (!pcc)
|
|
return -EINVAL;
|
|
|
|
if (pcc->num_sifr > SINF_MUTE)
|
|
acpi_pcc_write_sset(pcc, SINF_MUTE, pcc->mute);
|
|
if (pcc->num_sifr > SINF_ECO_MODE)
|
|
acpi_pcc_write_sset(pcc, SINF_ECO_MODE, pcc->eco_mode);
|
|
acpi_pcc_write_sset(pcc, SINF_STICKY_KEY, pcc->sticky_key);
|
|
acpi_pcc_write_sset(pcc, SINF_AC_CUR_BRIGHT, pcc->ac_brightness);
|
|
acpi_pcc_write_sset(pcc, SINF_DC_CUR_BRIGHT, pcc->dc_brightness);
|
|
if (pcc->num_sifr > SINF_CUR_BRIGHT)
|
|
acpi_pcc_write_sset(pcc, SINF_CUR_BRIGHT, pcc->current_brightness);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static int acpi_pcc_hotkey_add(struct acpi_device *device)
|
|
{
|
|
struct backlight_properties props;
|
|
struct pcc_acpi *pcc;
|
|
int num_sifr, result;
|
|
|
|
if (!device)
|
|
return -EINVAL;
|
|
|
|
num_sifr = acpi_pcc_get_sqty(device);
|
|
|
|
/*
|
|
* pcc->sinf is expected to at least have the AC+DC brightness entries.
|
|
* Accesses to higher SINF entries are checked against num_sifr.
|
|
*/
|
|
if (num_sifr <= SINF_DC_CUR_BRIGHT || num_sifr > 255) {
|
|
pr_err("num_sifr %d out of range %d - 255\n", num_sifr, SINF_DC_CUR_BRIGHT + 1);
|
|
return -ENODEV;
|
|
}
|
|
|
|
/*
|
|
* Some DSDT-s have an off-by-one bug where the SINF package count is
|
|
* one higher than the SQTY reported value, allocate 1 entry extra.
|
|
*/
|
|
num_sifr++;
|
|
|
|
pcc = kzalloc(sizeof(struct pcc_acpi), GFP_KERNEL);
|
|
if (!pcc) {
|
|
pr_err("Couldn't allocate mem for pcc");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
pcc->sinf = kcalloc(num_sifr + 1, sizeof(u32), GFP_KERNEL);
|
|
if (!pcc->sinf) {
|
|
result = -ENOMEM;
|
|
goto out_hotkey;
|
|
}
|
|
|
|
pcc->device = device;
|
|
pcc->handle = device->handle;
|
|
pcc->num_sifr = num_sifr;
|
|
device->driver_data = pcc;
|
|
strcpy(acpi_device_name(device), ACPI_PCC_DEVICE_NAME);
|
|
strcpy(acpi_device_class(device), ACPI_PCC_CLASS);
|
|
|
|
result = acpi_pcc_init_input(pcc);
|
|
if (result) {
|
|
pr_err("Error installing keyinput handler\n");
|
|
goto out_sinf;
|
|
}
|
|
|
|
if (!acpi_pcc_retrieve_biosdata(pcc)) {
|
|
result = -EIO;
|
|
pr_err("Couldn't retrieve BIOS data\n");
|
|
goto out_input;
|
|
}
|
|
|
|
if (acpi_video_get_backlight_type() == acpi_backlight_vendor) {
|
|
/* initialize backlight */
|
|
memset(&props, 0, sizeof(struct backlight_properties));
|
|
props.type = BACKLIGHT_PLATFORM;
|
|
props.max_brightness = pcc->sinf[SINF_AC_MAX_BRIGHT];
|
|
|
|
pcc->backlight = backlight_device_register("panasonic", NULL, pcc,
|
|
&pcc_backlight_ops, &props);
|
|
if (IS_ERR(pcc->backlight)) {
|
|
result = PTR_ERR(pcc->backlight);
|
|
goto out_input;
|
|
}
|
|
|
|
/* read the initial brightness setting from the hardware */
|
|
pcc->backlight->props.brightness = pcc->sinf[SINF_AC_CUR_BRIGHT];
|
|
}
|
|
|
|
/* Reset initial sticky key mode since the hardware register state is not consistent */
|
|
acpi_pcc_write_sset(pcc, SINF_STICKY_KEY, 0);
|
|
pcc->sticky_key = 0;
|
|
|
|
pcc->ac_brightness = pcc->sinf[SINF_AC_CUR_BRIGHT];
|
|
pcc->dc_brightness = pcc->sinf[SINF_DC_CUR_BRIGHT];
|
|
if (pcc->num_sifr > SINF_MUTE)
|
|
pcc->mute = pcc->sinf[SINF_MUTE];
|
|
if (pcc->num_sifr > SINF_ECO_MODE)
|
|
pcc->eco_mode = pcc->sinf[SINF_ECO_MODE];
|
|
if (pcc->num_sifr > SINF_CUR_BRIGHT)
|
|
pcc->current_brightness = pcc->sinf[SINF_CUR_BRIGHT];
|
|
|
|
/* add sysfs attributes */
|
|
result = sysfs_create_group(&device->dev.kobj, &pcc_attr_group);
|
|
if (result)
|
|
goto out_backlight;
|
|
|
|
/* optical drive initialization */
|
|
if (ACPI_SUCCESS(check_optd_present())) {
|
|
pcc->platform = platform_device_register_simple("panasonic",
|
|
PLATFORM_DEVID_NONE, NULL, 0);
|
|
if (IS_ERR(pcc->platform)) {
|
|
result = PTR_ERR(pcc->platform);
|
|
goto out_backlight;
|
|
}
|
|
result = device_create_file(&pcc->platform->dev,
|
|
&dev_attr_cdpower);
|
|
pcc_register_optd_notifier(pcc, "\\_SB.PCI0.EHCI.ERHB.OPTD");
|
|
if (result)
|
|
goto out_platform;
|
|
} else {
|
|
pcc->platform = NULL;
|
|
}
|
|
|
|
i8042_install_filter(panasonic_i8042_filter);
|
|
return 0;
|
|
|
|
out_platform:
|
|
platform_device_unregister(pcc->platform);
|
|
out_backlight:
|
|
backlight_device_unregister(pcc->backlight);
|
|
out_input:
|
|
input_unregister_device(pcc->input_dev);
|
|
out_sinf:
|
|
kfree(pcc->sinf);
|
|
out_hotkey:
|
|
kfree(pcc);
|
|
|
|
return result;
|
|
}
|
|
|
|
static void acpi_pcc_hotkey_remove(struct acpi_device *device)
|
|
{
|
|
struct pcc_acpi *pcc = acpi_driver_data(device);
|
|
|
|
if (!device || !pcc)
|
|
return;
|
|
|
|
i8042_remove_filter(panasonic_i8042_filter);
|
|
|
|
if (pcc->platform) {
|
|
device_remove_file(&pcc->platform->dev, &dev_attr_cdpower);
|
|
platform_device_unregister(pcc->platform);
|
|
}
|
|
pcc_unregister_optd_notifier(pcc, "\\_SB.PCI0.EHCI.ERHB.OPTD");
|
|
|
|
sysfs_remove_group(&device->dev.kobj, &pcc_attr_group);
|
|
|
|
backlight_device_unregister(pcc->backlight);
|
|
|
|
input_unregister_device(pcc->input_dev);
|
|
|
|
kfree(pcc->sinf);
|
|
kfree(pcc);
|
|
}
|
|
|
|
module_acpi_driver(acpi_pcc_driver);
|