1
linux/drivers/platform/x86/apple-gmux.c
Orlando Chamberlain 0e51cb4243 apple-gmux: Hard Code max brightness for MMIO gmux
The data in the max brightness port for iMacs with MMIO gmux incorrectly
reports 0x03ff, but it should be 0xffff. As all other MMIO gmux models
have 0xffff, hard code this for all MMIO gmux's so they all have the
proper brightness range accessible.

Fixes: 0c18184de9 ("platform/x86: apple-gmux: support MMIO gmux on T2 Macs")
Reported-by: Karsten Leipold <poldi@dfn.de>
Signed-off-by: Orlando Chamberlain <orlandoch.dev@gmail.com>
Link: https://lore.kernel.org/r/20231017111444.19304-2-orlandoch.dev@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-10-18 15:33:24 +02:00

1040 lines
32 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* Gmux driver for Apple laptops
*
* Copyright (C) Canonical Ltd. <seth.forshee@canonical.com>
* Copyright (C) 2010-2012 Andreas Heider <andreas@meetr.de>
* Copyright (C) 2015 Lukas Wunner <lukas@wunner.de>
* Copyright (C) 2023 Orlando Chamberlain <orlandoch.dev@gmail.com>
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/backlight.h>
#include <linux/acpi.h>
#include <linux/pnp.h>
#include <linux/apple-gmux.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/pci.h>
#include <linux/vga_switcheroo.h>
#include <linux/debugfs.h>
#include <acpi/video.h>
#include <asm/io.h>
/**
* DOC: Overview
*
* gmux is a microcontroller built into the MacBook Pro to support dual GPUs:
* A `Lattice XP2`_ on pre-retinas, a `Renesas R4F2113`_ on pre-T2 retinas.
*
* On T2 Macbooks, the gmux is part of the T2 Coprocessor's SMC. The SMC has
* an I2C connection to a `NXP PCAL6524` GPIO expander, which enables/disables
* the voltage regulators of the discrete GPU, drives the display panel power,
* and has a GPIO to switch the eDP mux. The Intel CPU can interact with
* gmux through MMIO, similar to how the main SMC interface is controlled.
*
* (The MacPro6,1 2013 also has a gmux, however it is unclear why since it has
* dual GPUs but no built-in display.)
*
* gmux is connected to the LPC bus of the southbridge. Its I/O ports are
* accessed differently depending on the microcontroller: Driver functions
* to access a pre-retina gmux are infixed ``_pio_``, those for a pre-T2
* retina gmux are infixed ``_index_``, and those on T2 Macs are infixed
* with ``_mmio_``.
*
* .. _Lattice XP2:
* http://www.latticesemi.com/en/Products/FPGAandCPLD/LatticeXP2.aspx
* .. _Renesas R4F2113:
* http://www.renesas.com/products/mpumcu/h8s/h8s2100/h8s2113/index.jsp
* .. _NXP PCAL6524:
* https://www.nxp.com/docs/en/data-sheet/PCAL6524.pdf
*/
struct apple_gmux_config;
struct apple_gmux_data {
u8 __iomem *iomem_base;
unsigned long iostart;
unsigned long iolen;
const struct apple_gmux_config *config;
struct mutex index_lock;
struct backlight_device *bdev;
/* switcheroo data */
acpi_handle dhandle;
int gpe;
bool external_switchable;
enum vga_switcheroo_client_id switch_state_display;
enum vga_switcheroo_client_id switch_state_ddc;
enum vga_switcheroo_client_id switch_state_external;
enum vga_switcheroo_state power_state;
struct completion powerchange_done;
/* debugfs data */
u8 selected_port;
struct dentry *debug_dentry;
};
static struct apple_gmux_data *apple_gmux_data;
struct apple_gmux_config {
u8 (*read8)(struct apple_gmux_data *gmux_data, int port);
void (*write8)(struct apple_gmux_data *gmux_data, int port, u8 val);
u32 (*read32)(struct apple_gmux_data *gmux_data, int port);
void (*write32)(struct apple_gmux_data *gmux_data, int port, u32 val);
const struct vga_switcheroo_handler *gmux_handler;
enum vga_switcheroo_handler_flags_t handler_flags;
unsigned long resource_type;
bool read_version_as_u32;
char *name;
};
#define GMUX_INTERRUPT_ENABLE 0xff
#define GMUX_INTERRUPT_DISABLE 0x00
#define GMUX_INTERRUPT_STATUS_ACTIVE 0
#define GMUX_INTERRUPT_STATUS_DISPLAY (1 << 0)
#define GMUX_INTERRUPT_STATUS_POWER (1 << 2)
#define GMUX_INTERRUPT_STATUS_HOTPLUG (1 << 3)
#define GMUX_BRIGHTNESS_MASK 0x00ffffff
#define GMUX_MAX_BRIGHTNESS GMUX_BRIGHTNESS_MASK
# define MMIO_GMUX_MAX_BRIGHTNESS 0xffff
static u8 gmux_pio_read8(struct apple_gmux_data *gmux_data, int port)
{
return inb(gmux_data->iostart + port);
}
static void gmux_pio_write8(struct apple_gmux_data *gmux_data, int port,
u8 val)
{
outb(val, gmux_data->iostart + port);
}
static u32 gmux_pio_read32(struct apple_gmux_data *gmux_data, int port)
{
return inl(gmux_data->iostart + port);
}
static void gmux_pio_write32(struct apple_gmux_data *gmux_data, int port,
u32 val)
{
int i;
u8 tmpval;
for (i = 0; i < 4; i++) {
tmpval = (val >> (i * 8)) & 0xff;
outb(tmpval, gmux_data->iostart + port + i);
}
}
static int gmux_index_wait_ready(struct apple_gmux_data *gmux_data)
{
int i = 200;
u8 gwr = inb(gmux_data->iostart + GMUX_PORT_WRITE);
while (i && (gwr & 0x01)) {
inb(gmux_data->iostart + GMUX_PORT_READ);
gwr = inb(gmux_data->iostart + GMUX_PORT_WRITE);
udelay(100);
i--;
}
return !!i;
}
static int gmux_index_wait_complete(struct apple_gmux_data *gmux_data)
{
int i = 200;
u8 gwr = inb(gmux_data->iostart + GMUX_PORT_WRITE);
while (i && !(gwr & 0x01)) {
gwr = inb(gmux_data->iostart + GMUX_PORT_WRITE);
udelay(100);
i--;
}
if (gwr & 0x01)
inb(gmux_data->iostart + GMUX_PORT_READ);
return !!i;
}
static u8 gmux_index_read8(struct apple_gmux_data *gmux_data, int port)
{
u8 val;
mutex_lock(&gmux_data->index_lock);
gmux_index_wait_ready(gmux_data);
outb((port & 0xff), gmux_data->iostart + GMUX_PORT_READ);
gmux_index_wait_complete(gmux_data);
val = inb(gmux_data->iostart + GMUX_PORT_VALUE);
mutex_unlock(&gmux_data->index_lock);
return val;
}
static void gmux_index_write8(struct apple_gmux_data *gmux_data, int port,
u8 val)
{
mutex_lock(&gmux_data->index_lock);
outb(val, gmux_data->iostart + GMUX_PORT_VALUE);
gmux_index_wait_ready(gmux_data);
outb(port & 0xff, gmux_data->iostart + GMUX_PORT_WRITE);
gmux_index_wait_complete(gmux_data);
mutex_unlock(&gmux_data->index_lock);
}
static u32 gmux_index_read32(struct apple_gmux_data *gmux_data, int port)
{
u32 val;
mutex_lock(&gmux_data->index_lock);
gmux_index_wait_ready(gmux_data);
outb((port & 0xff), gmux_data->iostart + GMUX_PORT_READ);
gmux_index_wait_complete(gmux_data);
val = inl(gmux_data->iostart + GMUX_PORT_VALUE);
mutex_unlock(&gmux_data->index_lock);
return val;
}
static void gmux_index_write32(struct apple_gmux_data *gmux_data, int port,
u32 val)
{
int i;
u8 tmpval;
mutex_lock(&gmux_data->index_lock);
for (i = 0; i < 4; i++) {
tmpval = (val >> (i * 8)) & 0xff;
outb(tmpval, gmux_data->iostart + GMUX_PORT_VALUE + i);
}
gmux_index_wait_ready(gmux_data);
outb(port & 0xff, gmux_data->iostart + GMUX_PORT_WRITE);
gmux_index_wait_complete(gmux_data);
mutex_unlock(&gmux_data->index_lock);
}
static int gmux_mmio_wait(struct apple_gmux_data *gmux_data)
{
int i = 200;
u8 gwr = ioread8(gmux_data->iomem_base + GMUX_MMIO_COMMAND_SEND);
while (i && gwr) {
gwr = ioread8(gmux_data->iomem_base + GMUX_MMIO_COMMAND_SEND);
udelay(100);
i--;
}
return !!i;
}
static u8 gmux_mmio_read8(struct apple_gmux_data *gmux_data, int port)
{
u8 val;
mutex_lock(&gmux_data->index_lock);
gmux_mmio_wait(gmux_data);
iowrite8((port & 0xff), gmux_data->iomem_base + GMUX_MMIO_PORT_SELECT);
iowrite8(GMUX_MMIO_READ | sizeof(val),
gmux_data->iomem_base + GMUX_MMIO_COMMAND_SEND);
gmux_mmio_wait(gmux_data);
val = ioread8(gmux_data->iomem_base);
mutex_unlock(&gmux_data->index_lock);
return val;
}
static void gmux_mmio_write8(struct apple_gmux_data *gmux_data, int port,
u8 val)
{
mutex_lock(&gmux_data->index_lock);
gmux_mmio_wait(gmux_data);
iowrite8(val, gmux_data->iomem_base);
iowrite8(port & 0xff, gmux_data->iomem_base + GMUX_MMIO_PORT_SELECT);
iowrite8(GMUX_MMIO_WRITE | sizeof(val),
gmux_data->iomem_base + GMUX_MMIO_COMMAND_SEND);
gmux_mmio_wait(gmux_data);
mutex_unlock(&gmux_data->index_lock);
}
static u32 gmux_mmio_read32(struct apple_gmux_data *gmux_data, int port)
{
u32 val;
mutex_lock(&gmux_data->index_lock);
gmux_mmio_wait(gmux_data);
iowrite8((port & 0xff), gmux_data->iomem_base + GMUX_MMIO_PORT_SELECT);
iowrite8(GMUX_MMIO_READ | sizeof(val),
gmux_data->iomem_base + GMUX_MMIO_COMMAND_SEND);
gmux_mmio_wait(gmux_data);
val = ioread32be(gmux_data->iomem_base);
mutex_unlock(&gmux_data->index_lock);
return val;
}
static void gmux_mmio_write32(struct apple_gmux_data *gmux_data, int port,
u32 val)
{
mutex_lock(&gmux_data->index_lock);
iowrite32be(val, gmux_data->iomem_base);
iowrite8(port & 0xff, gmux_data->iomem_base + GMUX_MMIO_PORT_SELECT);
iowrite8(GMUX_MMIO_WRITE | sizeof(val),
gmux_data->iomem_base + GMUX_MMIO_COMMAND_SEND);
gmux_mmio_wait(gmux_data);
mutex_unlock(&gmux_data->index_lock);
}
static u8 gmux_read8(struct apple_gmux_data *gmux_data, int port)
{
return gmux_data->config->read8(gmux_data, port);
}
static void gmux_write8(struct apple_gmux_data *gmux_data, int port, u8 val)
{
return gmux_data->config->write8(gmux_data, port, val);
}
static u32 gmux_read32(struct apple_gmux_data *gmux_data, int port)
{
return gmux_data->config->read32(gmux_data, port);
}
static void gmux_write32(struct apple_gmux_data *gmux_data, int port,
u32 val)
{
return gmux_data->config->write32(gmux_data, port, val);
}
/**
* DOC: Backlight control
*
* On single GPU MacBooks, the PWM signal for the backlight is generated by
* the GPU. On dual GPU MacBook Pros by contrast, either GPU may be suspended
* to conserve energy. Hence the PWM signal needs to be generated by a separate
* backlight driver which is controlled by gmux. The earliest generation
* MBP5 2008/09 uses a `TI LP8543`_ backlight driver. Newer models
* use a `TI LP8545`_ or a TI LP8548.
*
* .. _TI LP8543: https://www.ti.com/lit/ds/symlink/lp8543.pdf
* .. _TI LP8545: https://www.ti.com/lit/ds/symlink/lp8545.pdf
*/
static int gmux_get_brightness(struct backlight_device *bd)
{
struct apple_gmux_data *gmux_data = bl_get_data(bd);
return gmux_read32(gmux_data, GMUX_PORT_BRIGHTNESS) &
GMUX_BRIGHTNESS_MASK;
}
static int gmux_update_status(struct backlight_device *bd)
{
struct apple_gmux_data *gmux_data = bl_get_data(bd);
u32 brightness = backlight_get_brightness(bd);
gmux_write32(gmux_data, GMUX_PORT_BRIGHTNESS, brightness);
return 0;
}
static const struct backlight_ops gmux_bl_ops = {
.options = BL_CORE_SUSPENDRESUME,
.get_brightness = gmux_get_brightness,
.update_status = gmux_update_status,
};
/**
* DOC: Graphics mux
*
* On pre-retinas, the LVDS outputs of both GPUs feed into gmux which muxes
* either of them to the panel. One of the tricks gmux has up its sleeve is
* to lengthen the blanking interval of its output during a switch to
* synchronize it with the GPU switched to. This allows for a flicker-free
* switch that is imperceptible by the user (`US 8,687,007 B2`_).
*
* On retinas, muxing is no longer done by gmux itself, but by a separate
* chip which is controlled by gmux. The chip is triple sourced, it is
* either an `NXP CBTL06142`_, `TI HD3SS212`_ or `Pericom PI3VDP12412`_.
* The panel is driven with eDP instead of LVDS since the pixel clock
* required for retina resolution exceeds LVDS' limits.
*
* Pre-retinas are able to switch the panel's DDC pins separately.
* This is handled by a `TI SN74LV4066A`_ which is controlled by gmux.
* The inactive GPU can thus probe the panel's EDID without switching over
* the entire panel. Retinas lack this functionality as the chips used for
* eDP muxing are incapable of switching the AUX channel separately (see
* the linked data sheets, Pericom would be capable but this is unused).
* However the retina panel has the NO_AUX_HANDSHAKE_LINK_TRAINING bit set
* in its DPCD, allowing the inactive GPU to skip the AUX handshake and
* set up the output with link parameters pre-calibrated by the active GPU.
*
* The external DP port is only fully switchable on the first two unibody
* MacBook Pro generations, MBP5 2008/09 and MBP6 2010. This is done by an
* `NXP CBTL06141`_ which is controlled by gmux. It's the predecessor of the
* eDP mux on retinas, the difference being support for 2.7 versus 5.4 Gbit/s.
*
* The following MacBook Pro generations replaced the external DP port with a
* combined DP/Thunderbolt port and lost the ability to switch it between GPUs,
* connecting it either to the discrete GPU or the Thunderbolt controller.
* Oddly enough, while the full port is no longer switchable, AUX and HPD
* are still switchable by way of an `NXP CBTL03062`_ (on pre-retinas
* MBP8 2011 and MBP9 2012) or two `TI TS3DS10224`_ (on pre-t2 retinas) under
* the control of gmux. Since the integrated GPU is missing the main link,
* external displays appear to it as phantoms which fail to link-train.
*
* gmux receives the HPD signal of all display connectors and sends an
* interrupt on hotplug. On generations which cannot switch external ports,
* the discrete GPU can then be woken to drive the newly connected display.
* The ability to switch AUX on these generations could be used to improve
* reliability of hotplug detection by having the integrated GPU poll the
* ports while the discrete GPU is asleep, but currently we do not make use
* of this feature.
*
* Our switching policy for the external port is that on those generations
* which are able to switch it fully, the port is switched together with the
* panel when IGD / DIS commands are issued to vga_switcheroo. It is thus
* possible to drive e.g. a beamer on battery power with the integrated GPU.
* The user may manually switch to the discrete GPU if more performance is
* needed.
*
* On all newer generations, the external port can only be driven by the
* discrete GPU. If a display is plugged in while the panel is switched to
* the integrated GPU, *both* GPUs will be in use for maximum performance.
* To decrease power consumption, the user may manually switch to the
* discrete GPU, thereby suspending the integrated GPU.
*
* gmux' initial switch state on bootup is user configurable via the EFI
* variable ``gpu-power-prefs-fa4ce28d-b62f-4c99-9cc3-6815686e30f9`` (5th byte,
* 1 = IGD, 0 = DIS). Based on this setting, the EFI firmware tells gmux to
* switch the panel and the external DP connector and allocates a framebuffer
* for the selected GPU.
*
* .. _US 8,687,007 B2: https://pimg-fpiw.uspto.gov/fdd/07/870/086/0.pdf
* .. _NXP CBTL06141: https://www.nxp.com/documents/data_sheet/CBTL06141.pdf
* .. _NXP CBTL06142: https://www.nxp.com/documents/data_sheet/CBTL06141.pdf
* .. _TI HD3SS212: https://www.ti.com/lit/ds/symlink/hd3ss212.pdf
* .. _Pericom PI3VDP12412: https://www.pericom.com/assets/Datasheets/PI3VDP12412.pdf
* .. _TI SN74LV4066A: https://www.ti.com/lit/ds/symlink/sn74lv4066a.pdf
* .. _NXP CBTL03062: http://pdf.datasheetarchive.com/indexerfiles/Datasheets-SW16/DSASW00308511.pdf
* .. _TI TS3DS10224: https://www.ti.com/lit/ds/symlink/ts3ds10224.pdf
*/
static void gmux_read_switch_state(struct apple_gmux_data *gmux_data)
{
if (gmux_read8(gmux_data, GMUX_PORT_SWITCH_DDC) == 1)
gmux_data->switch_state_ddc = VGA_SWITCHEROO_IGD;
else
gmux_data->switch_state_ddc = VGA_SWITCHEROO_DIS;
if (gmux_read8(gmux_data, GMUX_PORT_SWITCH_DISPLAY) & 1)
gmux_data->switch_state_display = VGA_SWITCHEROO_DIS;
else
gmux_data->switch_state_display = VGA_SWITCHEROO_IGD;
if (gmux_read8(gmux_data, GMUX_PORT_SWITCH_EXTERNAL) == 2)
gmux_data->switch_state_external = VGA_SWITCHEROO_IGD;
else
gmux_data->switch_state_external = VGA_SWITCHEROO_DIS;
}
static void gmux_write_switch_state(struct apple_gmux_data *gmux_data)
{
if (gmux_data->switch_state_ddc == VGA_SWITCHEROO_IGD)
gmux_write8(gmux_data, GMUX_PORT_SWITCH_DDC, 1);
else
gmux_write8(gmux_data, GMUX_PORT_SWITCH_DDC, 2);
if (gmux_data->switch_state_display == VGA_SWITCHEROO_IGD)
gmux_write8(gmux_data, GMUX_PORT_SWITCH_DISPLAY, 2);
else
gmux_write8(gmux_data, GMUX_PORT_SWITCH_DISPLAY, 3);
if (gmux_data->switch_state_external == VGA_SWITCHEROO_IGD)
gmux_write8(gmux_data, GMUX_PORT_SWITCH_EXTERNAL, 2);
else
gmux_write8(gmux_data, GMUX_PORT_SWITCH_EXTERNAL, 3);
}
static int gmux_switchto(enum vga_switcheroo_client_id id)
{
apple_gmux_data->switch_state_ddc = id;
apple_gmux_data->switch_state_display = id;
if (apple_gmux_data->external_switchable)
apple_gmux_data->switch_state_external = id;
gmux_write_switch_state(apple_gmux_data);
return 0;
}
static int gmux_switch_ddc(enum vga_switcheroo_client_id id)
{
enum vga_switcheroo_client_id old_ddc_owner =
apple_gmux_data->switch_state_ddc;
if (id == old_ddc_owner)
return id;
pr_debug("Switching DDC from %d to %d\n", old_ddc_owner, id);
apple_gmux_data->switch_state_ddc = id;
if (id == VGA_SWITCHEROO_IGD)
gmux_write8(apple_gmux_data, GMUX_PORT_SWITCH_DDC, 1);
else
gmux_write8(apple_gmux_data, GMUX_PORT_SWITCH_DDC, 2);
return old_ddc_owner;
}
/**
* DOC: Power control
*
* gmux is able to cut power to the discrete GPU. It automatically takes care
* of the correct sequence to tear down and bring up the power rails for
* core voltage, VRAM and PCIe.
*/
static int gmux_set_discrete_state(struct apple_gmux_data *gmux_data,
enum vga_switcheroo_state state)
{
reinit_completion(&gmux_data->powerchange_done);
if (state == VGA_SWITCHEROO_ON) {
gmux_write8(gmux_data, GMUX_PORT_DISCRETE_POWER, 1);
gmux_write8(gmux_data, GMUX_PORT_DISCRETE_POWER, 3);
pr_debug("Discrete card powered up\n");
} else {
gmux_write8(gmux_data, GMUX_PORT_DISCRETE_POWER, 1);
gmux_write8(gmux_data, GMUX_PORT_DISCRETE_POWER, 0);
pr_debug("Discrete card powered down\n");
}
gmux_data->power_state = state;
if (gmux_data->gpe >= 0 &&
!wait_for_completion_interruptible_timeout(&gmux_data->powerchange_done,
msecs_to_jiffies(200)))
pr_warn("Timeout waiting for gmux switch to complete\n");
return 0;
}
static int gmux_set_power_state(enum vga_switcheroo_client_id id,
enum vga_switcheroo_state state)
{
if (id == VGA_SWITCHEROO_IGD)
return 0;
return gmux_set_discrete_state(apple_gmux_data, state);
}
static enum vga_switcheroo_client_id gmux_get_client_id(struct pci_dev *pdev)
{
/*
* Early Macbook Pros with switchable graphics use nvidia
* integrated graphics. Hardcode that the 9400M is integrated.
*/
if (pdev->vendor == PCI_VENDOR_ID_INTEL)
return VGA_SWITCHEROO_IGD;
else if (pdev->vendor == PCI_VENDOR_ID_NVIDIA &&
pdev->device == 0x0863)
return VGA_SWITCHEROO_IGD;
else
return VGA_SWITCHEROO_DIS;
}
static const struct vga_switcheroo_handler gmux_handler_no_ddc = {
.switchto = gmux_switchto,
.power_state = gmux_set_power_state,
.get_client_id = gmux_get_client_id,
};
static const struct vga_switcheroo_handler gmux_handler_ddc = {
.switchto = gmux_switchto,
.switch_ddc = gmux_switch_ddc,
.power_state = gmux_set_power_state,
.get_client_id = gmux_get_client_id,
};
static const struct apple_gmux_config apple_gmux_pio = {
.read8 = &gmux_pio_read8,
.write8 = &gmux_pio_write8,
.read32 = &gmux_pio_read32,
.write32 = &gmux_pio_write32,
.gmux_handler = &gmux_handler_ddc,
.handler_flags = VGA_SWITCHEROO_CAN_SWITCH_DDC,
.resource_type = IORESOURCE_IO,
.read_version_as_u32 = false,
.name = "classic"
};
static const struct apple_gmux_config apple_gmux_index = {
.read8 = &gmux_index_read8,
.write8 = &gmux_index_write8,
.read32 = &gmux_index_read32,
.write32 = &gmux_index_write32,
.gmux_handler = &gmux_handler_no_ddc,
.handler_flags = VGA_SWITCHEROO_NEEDS_EDP_CONFIG,
.resource_type = IORESOURCE_IO,
.read_version_as_u32 = true,
.name = "indexed"
};
static const struct apple_gmux_config apple_gmux_mmio = {
.read8 = &gmux_mmio_read8,
.write8 = &gmux_mmio_write8,
.read32 = &gmux_mmio_read32,
.write32 = &gmux_mmio_write32,
.gmux_handler = &gmux_handler_no_ddc,
.handler_flags = VGA_SWITCHEROO_NEEDS_EDP_CONFIG,
.resource_type = IORESOURCE_MEM,
.read_version_as_u32 = true,
.name = "T2"
};
/**
* DOC: Interrupt
*
* gmux is also connected to a GPIO pin of the southbridge and thereby is able
* to trigger an ACPI GPE. ACPI name GMGP holds this GPIO pin's number. On the
* MBP5 2008/09 it's GPIO pin 22 of the Nvidia MCP79, on following generations
* it's GPIO pin 6 of the Intel PCH, on MMIO gmux's it's pin 21.
*
* The GPE merely signals that an interrupt occurred, the actual type of event
* is identified by reading a gmux register.
*
* In addition to the GMGP name, gmux's ACPI device also has two methods GMSP
* and GMLV. GMLV likely means "GMUX Level", and reads the value of the GPIO,
* while GMSP likely means "GMUX Set Polarity", and seems to write to the GPIO's
* value. On newer Macbooks (This was introduced with or sometime before the
* MacBookPro14,3), the ACPI GPE method differentiates between the OS type: On
* Darwin, only a notification is signaled, whereas on other OSes, the GPIO's
* value is read and then inverted.
*
* Because Linux masquerades as Darwin, it ends up in the notification-only code
* path. On MMIO gmux's, this seems to lead to us being unable to clear interrupts,
* unless we call GMSP(0). Without this, there is a flood of status=0 interrupts
* that can't be cleared. This issue seems to be unique to MMIO gmux's.
*/
static inline void gmux_disable_interrupts(struct apple_gmux_data *gmux_data)
{
gmux_write8(gmux_data, GMUX_PORT_INTERRUPT_ENABLE,
GMUX_INTERRUPT_DISABLE);
}
static inline void gmux_enable_interrupts(struct apple_gmux_data *gmux_data)
{
gmux_write8(gmux_data, GMUX_PORT_INTERRUPT_ENABLE,
GMUX_INTERRUPT_ENABLE);
}
static inline u8 gmux_interrupt_get_status(struct apple_gmux_data *gmux_data)
{
return gmux_read8(gmux_data, GMUX_PORT_INTERRUPT_STATUS);
}
static void gmux_clear_interrupts(struct apple_gmux_data *gmux_data)
{
u8 status;
/* to clear interrupts write back current status */
status = gmux_interrupt_get_status(gmux_data);
gmux_write8(gmux_data, GMUX_PORT_INTERRUPT_STATUS, status);
/* Prevent flood of status=0 interrupts */
if (gmux_data->config == &apple_gmux_mmio)
acpi_execute_simple_method(gmux_data->dhandle, "GMSP", 0);
}
static void gmux_notify_handler(acpi_handle device, u32 value, void *context)
{
u8 status;
struct pnp_dev *pnp = (struct pnp_dev *)context;
struct apple_gmux_data *gmux_data = pnp_get_drvdata(pnp);
status = gmux_interrupt_get_status(gmux_data);
gmux_disable_interrupts(gmux_data);
pr_debug("Notify handler called: status %d\n", status);
gmux_clear_interrupts(gmux_data);
gmux_enable_interrupts(gmux_data);
if (status & GMUX_INTERRUPT_STATUS_POWER)
complete(&gmux_data->powerchange_done);
}
/**
* DOC: Debugfs Interface
*
* gmux ports can be accessed from userspace as a debugfs interface. For example:
*
* # echo 4 > /sys/kernel/debug/apple_gmux/selected_port
* # cat /sys/kernel/debug/apple_gmux/selected_port_data | xxd -p
* 00000005
*
* Reads 4 bytes from port 4 (GMUX_PORT_VERSION_MAJOR).
*
* 1 and 4 byte writes are also allowed.
*/
static ssize_t gmux_selected_port_data_write(struct file *file,
const char __user *userbuf, size_t count, loff_t *ppos)
{
struct apple_gmux_data *gmux_data = file->private_data;
if (*ppos)
return -EINVAL;
if (count == 1) {
u8 data;
if (copy_from_user(&data, userbuf, 1))
return -EFAULT;
gmux_write8(gmux_data, gmux_data->selected_port, data);
} else if (count == 4) {
u32 data;
if (copy_from_user(&data, userbuf, 4))
return -EFAULT;
gmux_write32(gmux_data, gmux_data->selected_port, data);
} else
return -EINVAL;
return count;
}
static ssize_t gmux_selected_port_data_read(struct file *file,
char __user *userbuf, size_t count, loff_t *ppos)
{
struct apple_gmux_data *gmux_data = file->private_data;
u32 data;
data = gmux_read32(gmux_data, gmux_data->selected_port);
return simple_read_from_buffer(userbuf, count, ppos, &data, sizeof(data));
}
static const struct file_operations gmux_port_data_ops = {
.open = simple_open,
.write = gmux_selected_port_data_write,
.read = gmux_selected_port_data_read
};
static void gmux_init_debugfs(struct apple_gmux_data *gmux_data)
{
gmux_data->debug_dentry = debugfs_create_dir(KBUILD_MODNAME, NULL);
debugfs_create_u8("selected_port", 0644, gmux_data->debug_dentry,
&gmux_data->selected_port);
debugfs_create_file("selected_port_data", 0644, gmux_data->debug_dentry,
gmux_data, &gmux_port_data_ops);
}
static void gmux_fini_debugfs(struct apple_gmux_data *gmux_data)
{
debugfs_remove_recursive(gmux_data->debug_dentry);
}
static int gmux_suspend(struct device *dev)
{
struct pnp_dev *pnp = to_pnp_dev(dev);
struct apple_gmux_data *gmux_data = pnp_get_drvdata(pnp);
gmux_disable_interrupts(gmux_data);
return 0;
}
static int gmux_resume(struct device *dev)
{
struct pnp_dev *pnp = to_pnp_dev(dev);
struct apple_gmux_data *gmux_data = pnp_get_drvdata(pnp);
gmux_enable_interrupts(gmux_data);
gmux_write_switch_state(gmux_data);
if (gmux_data->power_state == VGA_SWITCHEROO_OFF)
gmux_set_discrete_state(gmux_data, gmux_data->power_state);
return 0;
}
static int is_thunderbolt(struct device *dev, void *data)
{
return to_pci_dev(dev)->is_thunderbolt;
}
static int gmux_probe(struct pnp_dev *pnp, const struct pnp_device_id *id)
{
struct apple_gmux_data *gmux_data;
struct resource *res;
struct backlight_properties props;
struct backlight_device *bdev = NULL;
u8 ver_major, ver_minor, ver_release;
bool register_bdev = true;
int ret = -ENXIO;
acpi_status status;
unsigned long long gpe;
enum apple_gmux_type type;
u32 version;
if (apple_gmux_data)
return -EBUSY;
if (!apple_gmux_detect(pnp, &type)) {
pr_info("gmux device not present\n");
return -ENODEV;
}
gmux_data = kzalloc(sizeof(*gmux_data), GFP_KERNEL);
if (!gmux_data)
return -ENOMEM;
pnp_set_drvdata(pnp, gmux_data);
switch (type) {
case APPLE_GMUX_TYPE_MMIO:
gmux_data->config = &apple_gmux_mmio;
mutex_init(&gmux_data->index_lock);
res = pnp_get_resource(pnp, IORESOURCE_MEM, 0);
gmux_data->iostart = res->start;
/* Although the ACPI table only allocates 8 bytes, we need 16. */
gmux_data->iolen = 16;
if (!request_mem_region(gmux_data->iostart, gmux_data->iolen,
"Apple gmux")) {
pr_err("gmux I/O already in use\n");
goto err_free;
}
gmux_data->iomem_base = ioremap(gmux_data->iostart, gmux_data->iolen);
if (!gmux_data->iomem_base) {
pr_err("couldn't remap gmux mmio region");
goto err_release;
}
goto get_version;
case APPLE_GMUX_TYPE_INDEXED:
gmux_data->config = &apple_gmux_index;
mutex_init(&gmux_data->index_lock);
break;
case APPLE_GMUX_TYPE_PIO:
gmux_data->config = &apple_gmux_pio;
break;
}
res = pnp_get_resource(pnp, IORESOURCE_IO, 0);
gmux_data->iostart = res->start;
gmux_data->iolen = resource_size(res);
if (!request_region(gmux_data->iostart, gmux_data->iolen,
"Apple gmux")) {
pr_err("gmux I/O already in use\n");
goto err_free;
}
get_version:
if (gmux_data->config->read_version_as_u32) {
version = gmux_read32(gmux_data, GMUX_PORT_VERSION_MAJOR);
ver_major = (version >> 24) & 0xff;
ver_minor = (version >> 16) & 0xff;
ver_release = (version >> 8) & 0xff;
} else {
ver_major = gmux_read8(gmux_data, GMUX_PORT_VERSION_MAJOR);
ver_minor = gmux_read8(gmux_data, GMUX_PORT_VERSION_MINOR);
ver_release = gmux_read8(gmux_data, GMUX_PORT_VERSION_RELEASE);
}
pr_info("Found gmux version %d.%d.%d [%s]\n", ver_major, ver_minor,
ver_release, gmux_data->config->name);
memset(&props, 0, sizeof(props));
props.type = BACKLIGHT_PLATFORM;
/*
* All MMIO gmux's have 0xffff as max brightness, but some iMacs incorrectly
* report 0x03ff, despite the firmware being happy to set 0xffff as the brightness
* at boot. Force 0xffff for all MMIO gmux's so they all have the correct brightness
* range.
*/
if (type == APPLE_GMUX_TYPE_MMIO)
props.max_brightness = MMIO_GMUX_MAX_BRIGHTNESS;
else
props.max_brightness = gmux_read32(gmux_data, GMUX_PORT_MAX_BRIGHTNESS);
#if IS_REACHABLE(CONFIG_ACPI_VIDEO)
register_bdev = acpi_video_get_backlight_type() == acpi_backlight_apple_gmux;
#endif
if (register_bdev) {
/*
* Currently it's assumed that the maximum brightness is less than
* 2^24 for compatibility with old gmux versions. Cap the max
* brightness at this value, but print a warning if the hardware
* reports something higher so that it can be fixed.
*/
if (WARN_ON(props.max_brightness > GMUX_MAX_BRIGHTNESS))
props.max_brightness = GMUX_MAX_BRIGHTNESS;
bdev = backlight_device_register("gmux_backlight", &pnp->dev,
gmux_data, &gmux_bl_ops, &props);
if (IS_ERR(bdev)) {
ret = PTR_ERR(bdev);
goto err_unmap;
}
gmux_data->bdev = bdev;
bdev->props.brightness = gmux_get_brightness(bdev);
backlight_update_status(bdev);
}
gmux_data->power_state = VGA_SWITCHEROO_ON;
gmux_data->dhandle = ACPI_HANDLE(&pnp->dev);
if (!gmux_data->dhandle) {
pr_err("Cannot find acpi handle for pnp device %s\n",
dev_name(&pnp->dev));
ret = -ENODEV;
goto err_notify;
}
status = acpi_evaluate_integer(gmux_data->dhandle, "GMGP", NULL, &gpe);
if (ACPI_SUCCESS(status)) {
gmux_data->gpe = (int)gpe;
status = acpi_install_notify_handler(gmux_data->dhandle,
ACPI_DEVICE_NOTIFY,
&gmux_notify_handler, pnp);
if (ACPI_FAILURE(status)) {
pr_err("Install notify handler failed: %s\n",
acpi_format_exception(status));
ret = -ENODEV;
goto err_notify;
}
status = acpi_enable_gpe(NULL, gmux_data->gpe);
if (ACPI_FAILURE(status)) {
pr_err("Cannot enable gpe: %s\n",
acpi_format_exception(status));
goto err_enable_gpe;
}
} else {
pr_warn("No GPE found for gmux\n");
gmux_data->gpe = -1;
}
/*
* If Thunderbolt is present, the external DP port is not fully
* switchable. Force its AUX channel to the discrete GPU.
*/
gmux_data->external_switchable =
!bus_for_each_dev(&pci_bus_type, NULL, NULL, is_thunderbolt);
if (!gmux_data->external_switchable)
gmux_write8(gmux_data, GMUX_PORT_SWITCH_EXTERNAL, 3);
apple_gmux_data = gmux_data;
init_completion(&gmux_data->powerchange_done);
gmux_enable_interrupts(gmux_data);
gmux_read_switch_state(gmux_data);
/*
* Retina MacBook Pros cannot switch the panel's AUX separately
* and need eDP pre-calibration. They are distinguishable from
* pre-retinas by having an "indexed" or "T2" gmux.
*
* Pre-retina MacBook Pros can switch the panel's DDC separately.
*/
ret = vga_switcheroo_register_handler(gmux_data->config->gmux_handler,
gmux_data->config->handler_flags);
if (ret) {
pr_err("Failed to register vga_switcheroo handler\n");
goto err_register_handler;
}
gmux_init_debugfs(gmux_data);
return 0;
err_register_handler:
gmux_disable_interrupts(gmux_data);
apple_gmux_data = NULL;
if (gmux_data->gpe >= 0)
acpi_disable_gpe(NULL, gmux_data->gpe);
err_enable_gpe:
if (gmux_data->gpe >= 0)
acpi_remove_notify_handler(gmux_data->dhandle,
ACPI_DEVICE_NOTIFY,
&gmux_notify_handler);
err_notify:
backlight_device_unregister(bdev);
err_unmap:
if (gmux_data->iomem_base)
iounmap(gmux_data->iomem_base);
err_release:
if (gmux_data->config->resource_type == IORESOURCE_MEM)
release_mem_region(gmux_data->iostart, gmux_data->iolen);
else
release_region(gmux_data->iostart, gmux_data->iolen);
err_free:
kfree(gmux_data);
return ret;
}
static void gmux_remove(struct pnp_dev *pnp)
{
struct apple_gmux_data *gmux_data = pnp_get_drvdata(pnp);
gmux_fini_debugfs(gmux_data);
vga_switcheroo_unregister_handler();
gmux_disable_interrupts(gmux_data);
if (gmux_data->gpe >= 0) {
acpi_disable_gpe(NULL, gmux_data->gpe);
acpi_remove_notify_handler(gmux_data->dhandle,
ACPI_DEVICE_NOTIFY,
&gmux_notify_handler);
}
backlight_device_unregister(gmux_data->bdev);
if (gmux_data->iomem_base) {
iounmap(gmux_data->iomem_base);
release_mem_region(gmux_data->iostart, gmux_data->iolen);
} else
release_region(gmux_data->iostart, gmux_data->iolen);
apple_gmux_data = NULL;
kfree(gmux_data);
}
static const struct pnp_device_id gmux_device_ids[] = {
{GMUX_ACPI_HID, 0},
{"", 0}
};
static const struct dev_pm_ops gmux_dev_pm_ops = {
.suspend = gmux_suspend,
.resume = gmux_resume,
};
static struct pnp_driver gmux_pnp_driver = {
.name = "apple-gmux",
.probe = gmux_probe,
.remove = gmux_remove,
.id_table = gmux_device_ids,
.driver = {
.pm = &gmux_dev_pm_ops,
},
};
module_pnp_driver(gmux_pnp_driver);
MODULE_AUTHOR("Seth Forshee <seth.forshee@canonical.com>");
MODULE_DESCRIPTION("Apple Gmux Driver");
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pnp, gmux_device_ids);