7e38a7422f
This patch extends the mlxbf-bootctl driver's sysfs entries to support read and write access for the manufacturing (MFG) fields in the board-level EEPROM. The MFG fields are set once during the board manufacturing phase, and then the MFG fields are write-protected. Signed-off-by: David Thompson <davthompson@nvidia.com> Reviewed-by: Shravan Kumar Ramani <shravankr@nvidia.com> Link: https://lore.kernel.org/r/20230821183939.3229-1-davthompson@nvidia.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
137 lines
5.0 KiB
C
137 lines
5.0 KiB
C
/* SPDX-License-Identifier: GPL-2.0 */
|
|
/*
|
|
* Copyright (c) 2019, Mellanox Technologies. All rights reserved.
|
|
*/
|
|
|
|
#ifndef __MLXBF_BOOTCTL_H__
|
|
#define __MLXBF_BOOTCTL_H__
|
|
|
|
/*
|
|
* Request that the on-chip watchdog be enabled, or disabled, after
|
|
* the next chip soft reset. This call does not affect the current
|
|
* status of the on-chip watchdog. If non-zero, the argument
|
|
* specifies the watchdog interval in seconds. If zero, the watchdog
|
|
* will not be enabled after the next soft reset. Non-zero errors are
|
|
* returned as documented below.
|
|
*/
|
|
#define MLXBF_BOOTCTL_SET_POST_RESET_WDOG 0x82000000
|
|
|
|
/*
|
|
* Query the status which has been requested for the on-chip watchdog
|
|
* after the next chip soft reset. Returns the interval as set by
|
|
* MLXBF_BOOTCTL_SET_POST_RESET_WDOG.
|
|
*/
|
|
#define MLXBF_BOOTCTL_GET_POST_RESET_WDOG 0x82000001
|
|
|
|
/*
|
|
* Request that a specific boot action be taken at the next soft
|
|
* reset. By default, the boot action is set by external chip pins,
|
|
* which are sampled on hard reset. Note that the boot action
|
|
* requested by this call will persist on subsequent resets unless
|
|
* this service, or the MLNX_SET_SECOND_RESET_ACTION service, is
|
|
* invoked. See below for the available MLNX_BOOT_xxx parameter
|
|
* values. Non-zero errors are returned as documented below.
|
|
*/
|
|
#define MLXBF_BOOTCTL_SET_RESET_ACTION 0x82000002
|
|
|
|
/*
|
|
* Return the specific boot action which will be taken at the next
|
|
* soft reset. Returns the reset action (see below for the parameter
|
|
* values for MLXBF_BOOTCTL_SET_RESET_ACTION).
|
|
*/
|
|
#define MLXBF_BOOTCTL_GET_RESET_ACTION 0x82000003
|
|
|
|
/*
|
|
* Request that a specific boot action be taken at the soft reset
|
|
* after the next soft reset. For a specified valid boot mode, the
|
|
* effect of this call is identical to that of invoking
|
|
* MLXBF_BOOTCTL_SET_RESET_ACTION after the next chip soft reset; in
|
|
* particular, after that reset, the action for the now next reset can
|
|
* be queried with MLXBF_BOOTCTL_GET_RESET_ACTION and modified with
|
|
* MLXBF_BOOTCTL_SET_RESET_ACTION. You may also specify the parameter as
|
|
* MLNX_BOOT_NONE, which is equivalent to specifying that no call to
|
|
* MLXBF_BOOTCTL_SET_RESET_ACTION be taken after the next chip soft reset.
|
|
* This call does not affect the action to be taken at the next soft
|
|
* reset. Non-zero errors are returned as documented below.
|
|
*/
|
|
#define MLXBF_BOOTCTL_SET_SECOND_RESET_ACTION 0x82000004
|
|
|
|
/*
|
|
* Return the specific boot action which will be taken at the soft
|
|
* reset after the next soft reset; this will be one of the valid
|
|
* actions for MLXBF_BOOTCTL_SET_SECOND_RESET_ACTION.
|
|
*/
|
|
#define MLXBF_BOOTCTL_GET_SECOND_RESET_ACTION 0x82000005
|
|
|
|
/*
|
|
* Return the fuse status of the current chip. The caller should specify
|
|
* with the second argument if the state of the lifecycle fuses or the
|
|
* version of secure boot fuse keys left should be returned.
|
|
*/
|
|
#define MLXBF_BOOTCTL_GET_TBB_FUSE_STATUS 0x82000006
|
|
|
|
/* Reset eMMC by programming the RST_N register. */
|
|
#define MLXBF_BOOTCTL_SET_EMMC_RST_N 0x82000007
|
|
|
|
#define MLXBF_BOOTCTL_GET_DIMM_INFO 0x82000008
|
|
|
|
/*
|
|
* Initiate Firmware Reset via TYU. This might be invoked during the reset
|
|
* flow in isolation mode.
|
|
*/
|
|
#define MLXBF_BOOTCTL_FW_RESET 0x8200000D
|
|
|
|
/*
|
|
* SMC function IDs to set, get and lock the manufacturing information
|
|
* stored within the eeprom.
|
|
*/
|
|
#define MLXBF_BOOTCTL_SET_MFG_INFO 0x8200000E
|
|
#define MLXBF_BOOTCTL_GET_MFG_INFO 0x8200000F
|
|
#define MLXBF_BOOTCTL_LOCK_MFG_INFO 0x82000011
|
|
|
|
/*
|
|
* SMC function IDs to set and get the large ICM carveout size
|
|
* stored in the eeprom.
|
|
*/
|
|
#define MLNX_HANDLE_SET_ICM_INFO 0x82000012
|
|
#define MLNX_HANDLE_GET_ICM_INFO 0x82000013
|
|
|
|
#define MAX_ICM_BUFFER_SIZE 10
|
|
|
|
/*
|
|
* SMC function ID to set the ARM boot state to up
|
|
*/
|
|
#define MLNX_HANDLE_OS_UP 0x82000014
|
|
|
|
/* SMC function IDs for SiP Service queries */
|
|
#define MLXBF_BOOTCTL_SIP_SVC_CALL_COUNT 0x8200ff00
|
|
#define MLXBF_BOOTCTL_SIP_SVC_UID 0x8200ff01
|
|
#define MLXBF_BOOTCTL_SIP_SVC_VERSION 0x8200ff03
|
|
|
|
/* ARM Standard Service Calls version numbers */
|
|
#define MLXBF_BOOTCTL_SVC_VERSION_MAJOR 0x0
|
|
#define MLXBF_BOOTCTL_SVC_VERSION_MINOR 0x2
|
|
|
|
/* Number of svc calls defined. */
|
|
#define MLXBF_BOOTCTL_NUM_SVC_CALLS 12
|
|
|
|
/* Valid reset actions for MLXBF_BOOTCTL_SET_RESET_ACTION. */
|
|
#define MLXBF_BOOTCTL_EXTERNAL 0 /* Not boot from eMMC */
|
|
#define MLXBF_BOOTCTL_EMMC 1 /* From primary eMMC boot partition */
|
|
#define MLNX_BOOTCTL_SWAP_EMMC 2 /* Swap eMMC boot partitions and reboot */
|
|
#define MLXBF_BOOTCTL_EMMC_LEGACY 3 /* From primary eMMC in legacy mode */
|
|
|
|
/* Valid arguments for requesting the fuse status. */
|
|
#define MLXBF_BOOTCTL_FUSE_STATUS_LIFECYCLE 0 /* Return lifecycle status. */
|
|
#define MLXBF_BOOTCTL_FUSE_STATUS_KEYS 1 /* Return secure boot key status */
|
|
|
|
/* Additional value to disable the MLXBF_BOOTCTL_SET_SECOND_RESET_ACTION. */
|
|
#define MLXBF_BOOTCTL_NONE 0x7fffffff /* Don't change next boot action */
|
|
|
|
#define MLXBF_LARGE_ICMC_MAX_STRING_SIZE 16
|
|
#define MLXBF_LARGE_ICMC_SIZE_MIN 0x80
|
|
#define MLXBF_LARGE_ICMC_SIZE_MAX 0x100000
|
|
#define MLXBF_LARGE_ICMC_GRANULARITY MLXBF_LARGE_ICMC_SIZE_MIN
|
|
|
|
#endif /* __MLXBF_BOOTCTL_H__ */
|