kevin/linux
1
Fork 0
Code
8ae418cf85
linux/drivers/parisc/eisa.c
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2 
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00

465 lines
12 KiB
C
Raw Blame History

/*
* eisa.c - provide support for EISA adapters in PA-RISC machines
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
* Copyright (c) 2001 Matthew Wilcox for Hewlett Packard
* Copyright (c) 2001 Daniel Engstrom <5116@telia.com>
*
* There are two distinct EISA adapters. Mongoose is found in machines
* before the 712; then the Wax ASIC is used. To complicate matters, the
* Wax ASIC also includes a PS/2 and RS-232 controller, but those are
* dealt with elsewhere; this file is concerned only with the EISA portions
* of Wax.
*
*
* HINT:
* -----
* To allow an ISA card to work properly in the EISA slot you need to
* set an edge trigger level. This may be done on the palo command line
* by adding the kernel parameter "eisa_irq_edge=n,n2,[...]]", with
* n and n2 as the irq levels you want to use.
*
* Example: "eisa_irq_edge=10,11" allows ISA cards to operate at
* irq levels 10 and 11.
*/
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/sched.h>
#include <linux/spinlock.h>
#include <linux/eisa.h>
#include <asm/byteorder.h>
#include <asm/io.h>
#include <asm/hardware.h>
#include <asm/processor.h>
#include <asm/parisc-device.h>
#include <asm/delay.h>
#include <asm/eisa_bus.h>
#include <asm/eisa_eeprom.h>
#if 0
#define EISA_DBG(msg, arg... ) printk(KERN_DEBUG "eisa: " msg , ## arg )
#else
#define EISA_DBG(msg, arg... )
#endif
#define SNAKES_EEPROM_BASE_ADDR 0xF0810400
#define MIRAGE_EEPROM_BASE_ADDR 0xF00C0400
static DEFINE_SPINLOCK(eisa_irq_lock);
void __iomem *eisa_eeprom_addr;
/* We can only have one EISA adapter in the system because neither
* implementation can be flexed.
*/
static struct eisa_ba {
struct pci_hba_data hba;
unsigned long eeprom_addr;
struct eisa_root_device root;
} eisa_dev;
/* Port ops */
static inline unsigned long eisa_permute(unsigned short port)
{
if (port & 0x300) {
return 0xfc000000 | ((port & 0xfc00) >> 6)
| ((port & 0x3f8) << 9) | (port & 7);
} else {
return 0xfc000000 | port;
}
}
unsigned char eisa_in8(unsigned short port)
{
if (EISA_bus)
return gsc_readb(eisa_permute(port));
return 0xff;
}
unsigned short eisa_in16(unsigned short port)
{
if (EISA_bus)
return le16_to_cpu(gsc_readw(eisa_permute(port)));
return 0xffff;
}
unsigned int eisa_in32(unsigned short port)
{
if (EISA_bus)
return le32_to_cpu(gsc_readl(eisa_permute(port)));
return 0xffffffff;
}
void eisa_out8(unsigned char data, unsigned short port)
{
if (EISA_bus)
gsc_writeb(data, eisa_permute(port));
}
void eisa_out16(unsigned short data, unsigned short port)
{
if (EISA_bus)
gsc_writew(cpu_to_le16(data), eisa_permute(port));
}
void eisa_out32(unsigned int data, unsigned short port)
{
if (EISA_bus)
gsc_writel(cpu_to_le32(data), eisa_permute(port));
}
#ifndef CONFIG_PCI
/* We call these directly without PCI. See asm/io.h. */
EXPORT_SYMBOL(eisa_in8);
EXPORT_SYMBOL(eisa_in16);
EXPORT_SYMBOL(eisa_in32);
EXPORT_SYMBOL(eisa_out8);
EXPORT_SYMBOL(eisa_out16);
EXPORT_SYMBOL(eisa_out32);
#endif
/* Interrupt handling */
/* cached interrupt mask registers */
static int master_mask;
static int slave_mask;
/* the trig level can be set with the
* eisa_irq_edge=n,n,n commandline parameter
* We should really read this from the EEPROM
* in the furure.
*/
/* irq 13,8,2,1,0 must be edge */
static unsigned int eisa_irq_level; /* default to edge triggered */
/* called by free irq */
static void eisa_disable_irq(unsigned int irq)
{
unsigned long flags;
EISA_DBG("disable irq %d\n", irq);
/* just mask for now */
spin_lock_irqsave(&eisa_irq_lock, flags);
if (irq & 8) {
slave_mask |= (1 << (irq&7));
eisa_out8(slave_mask, 0xa1);
} else {
master_mask |= (1 << (irq&7));
eisa_out8(master_mask, 0x21);
}
spin_unlock_irqrestore(&eisa_irq_lock, flags);
EISA_DBG("pic0 mask %02x\n", eisa_in8(0x21));
EISA_DBG("pic1 mask %02x\n", eisa_in8(0xa1));
}
/* called by request irq */
static void eisa_enable_irq(unsigned int irq)
{
unsigned long flags;
EISA_DBG("enable irq %d\n", irq);
spin_lock_irqsave(&eisa_irq_lock, flags);
if (irq & 8) {
slave_mask &= ~(1 << (irq&7));
eisa_out8(slave_mask, 0xa1);
} else {
master_mask &= ~(1 << (irq&7));
eisa_out8(master_mask, 0x21);
}
spin_unlock_irqrestore(&eisa_irq_lock, flags);
EISA_DBG("pic0 mask %02x\n", eisa_in8(0x21));
EISA_DBG("pic1 mask %02x\n", eisa_in8(0xa1));
}
static unsigned int eisa_startup_irq(unsigned int irq)
{
eisa_enable_irq(irq);
return 0;
}
static struct hw_interrupt_type eisa_interrupt_type = {
.typename = "EISA",
.startup = eisa_startup_irq,
.shutdown = eisa_disable_irq,
.enable = eisa_enable_irq,
.disable = eisa_disable_irq,
.ack = no_ack_irq,
.end = no_end_irq,
};
static irqreturn_t eisa_irq(int wax_irq, void *intr_dev, struct pt_regs *regs)
{
int irq = gsc_readb(0xfc01f000); /* EISA supports 16 irqs */
unsigned long flags;
spin_lock_irqsave(&eisa_irq_lock, flags);
/* read IRR command */
eisa_out8(0x0a, 0x20);
eisa_out8(0x0a, 0xa0);
EISA_DBG("irq IAR %02x 8259-1 irr %02x 8259-2 irr %02x\n",
irq, eisa_in8(0x20), eisa_in8(0xa0));
/* read ISR command */
eisa_out8(0x0a, 0x20);
eisa_out8(0x0a, 0xa0);
EISA_DBG("irq 8259-1 isr %02x imr %02x 8259-2 isr %02x imr %02x\n",
eisa_in8(0x20), eisa_in8(0x21), eisa_in8(0xa0), eisa_in8(0xa1));
irq &= 0xf;
/* mask irq and write eoi */
if (irq & 8) {
slave_mask |= (1 << (irq&7));
eisa_out8(slave_mask, 0xa1);
eisa_out8(0x60 | (irq&7),0xa0);/* 'Specific EOI' to slave */
eisa_out8(0x62,0x20); /* 'Specific EOI' to master-IRQ2 */
} else {
master_mask |= (1 << (irq&7));
eisa_out8(master_mask, 0x21);
eisa_out8(0x60|irq,0x20); /* 'Specific EOI' to master */
}
spin_unlock_irqrestore(&eisa_irq_lock, flags);
__do_IRQ(irq, regs);
spin_lock_irqsave(&eisa_irq_lock, flags);
/* unmask */
if (irq & 8) {
slave_mask &= ~(1 << (irq&7));
eisa_out8(slave_mask, 0xa1);
} else {
master_mask &= ~(1 << (irq&7));
eisa_out8(master_mask, 0x21);
}
spin_unlock_irqrestore(&eisa_irq_lock, flags);
return IRQ_HANDLED;
}
static irqreturn_t dummy_irq2_handler(int _, void *dev, struct pt_regs *regs)
{
printk(KERN_ALERT "eisa: uhh, irq2?\n");
return IRQ_HANDLED;
}
static struct irqaction irq2_action = {
.handler = dummy_irq2_handler,
.name = "cascade",
};
static void init_eisa_pic(void)
{
unsigned long flags;
spin_lock_irqsave(&eisa_irq_lock, flags);
eisa_out8(0xff, 0x21); /* mask during init */
eisa_out8(0xff, 0xa1); /* mask during init */
/* master pic */
eisa_out8(0x11,0x20); /* ICW1 */
eisa_out8(0x00,0x21); /* ICW2 */
eisa_out8(0x04,0x21); /* ICW3 */
eisa_out8(0x01,0x21); /* ICW4 */
eisa_out8(0x40,0x20); /* OCW2 */
/* slave pic */
eisa_out8(0x11,0xa0); /* ICW1 */
eisa_out8(0x08,0xa1); /* ICW2 */
eisa_out8(0x02,0xa1); /* ICW3 */
eisa_out8(0x01,0xa1); /* ICW4 */
eisa_out8(0x40,0xa0); /* OCW2 */
udelay(100);
slave_mask = 0xff;
master_mask = 0xfb;
eisa_out8(slave_mask, 0xa1); /* OCW1 */
eisa_out8(master_mask, 0x21); /* OCW1 */
/* setup trig level */
EISA_DBG("EISA edge/level %04x\n", eisa_irq_level);
eisa_out8(eisa_irq_level&0xff, 0x4d0); /* Set all irq's to edge */
eisa_out8((eisa_irq_level >> 8) & 0xff, 0x4d1);
EISA_DBG("pic0 mask %02x\n", eisa_in8(0x21));
EISA_DBG("pic1 mask %02x\n", eisa_in8(0xa1));
EISA_DBG("pic0 edge/level %02x\n", eisa_in8(0x4d0));
EISA_DBG("pic1 edge/level %02x\n", eisa_in8(0x4d1));
spin_unlock_irqrestore(&eisa_irq_lock, flags);
}
/* Device initialisation */
#define is_mongoose(dev) (dev->id.sversion == 0x00076)
static int __devinit eisa_probe(struct parisc_device *dev)
{
int i, result;
char *name = is_mongoose(dev) ? "Mongoose" : "Wax";
printk(KERN_INFO "%s EISA Adapter found at 0x%08lx\n",
name, dev->hpa);
eisa_dev.hba.dev = dev;
eisa_dev.hba.iommu = ccio_get_iommu(dev);
eisa_dev.hba.lmmio_space.name = "EISA";
eisa_dev.hba.lmmio_space.start = F_EXTEND(0xfc000000);
eisa_dev.hba.lmmio_space.end = F_EXTEND(0xffbfffff);
eisa_dev.hba.lmmio_space.flags = IORESOURCE_MEM;
result = ccio_request_resource(dev, &eisa_dev.hba.lmmio_space);
if (result < 0) {
printk(KERN_ERR "EISA: failed to claim EISA Bus address space!\n");
return result;
}
eisa_dev.hba.io_space.name = "EISA";
eisa_dev.hba.io_space.start = 0;
eisa_dev.hba.io_space.end = 0xffff;
eisa_dev.hba.lmmio_space.flags = IORESOURCE_IO;
result = request_resource(&ioport_resource, &eisa_dev.hba.io_space);
if (result < 0) {
printk(KERN_ERR "EISA: failed to claim EISA Bus port space!\n");
return result;
}
pcibios_register_hba(&eisa_dev.hba);
result = request_irq(dev->irq, eisa_irq, SA_SHIRQ, "EISA", &eisa_dev);
if (result) {
printk(KERN_ERR "EISA: request_irq failed!\n");
return result;
}
/* Reserve IRQ2 */
irq_desc[2].action = &irq2_action;
for (i = 0; i < 16; i++) {
irq_desc[i].handler = &eisa_interrupt_type;
}
EISA_bus = 1;
if (dev->num_addrs) {
/* newer firmware hand out the eeprom address */
eisa_dev.eeprom_addr = dev->addr[0];
} else {
/* old firmware, need to figure out the box */
if (is_mongoose(dev)) {
eisa_dev.eeprom_addr = SNAKES_EEPROM_BASE_ADDR;
} else {
eisa_dev.eeprom_addr = MIRAGE_EEPROM_BASE_ADDR;
}
}
eisa_eeprom_addr = ioremap(eisa_dev.eeprom_addr, HPEE_MAX_LENGTH);
result = eisa_enumerator(eisa_dev.eeprom_addr, &eisa_dev.hba.io_space,
&eisa_dev.hba.lmmio_space);
init_eisa_pic();
if (result >= 0) {
/* FIXME : Don't enumerate the bus twice. */
eisa_dev.root.dev = &dev->dev;
dev->dev.driver_data = &eisa_dev.root;
eisa_dev.root.bus_base_addr = 0;
eisa_dev.root.res = &eisa_dev.hba.io_space;
eisa_dev.root.slots = result;
eisa_dev.root.dma_mask = 0xffffffff; /* wild guess */
if (eisa_root_register (&eisa_dev.root)) {
printk(KERN_ERR "EISA: Failed to register EISA root\n");
return -1;
}
}
return 0;
}
static struct parisc_device_id eisa_tbl[] = {
{ HPHW_BA, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x00076 }, /* Mongoose */
{ HPHW_BA, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x00090 }, /* Wax EISA */
{ 0, }
};
MODULE_DEVICE_TABLE(parisc, eisa_tbl);
static struct parisc_driver eisa_driver = {
.name = "EISA Bus Adapter",
.id_table = eisa_tbl,
.probe = eisa_probe,
};
void __init eisa_init(void)
{
register_parisc_driver(&eisa_driver);
}
static unsigned int eisa_irq_configured;
void eisa_make_irq_level(int num)
{
if (eisa_irq_configured& (1<<num)) {
printk(KERN_WARNING
"IRQ %d polarity configured twice (last to level)\n",
num);
}
eisa_irq_level |= (1<<num); /* set the corresponding bit */
eisa_irq_configured |= (1<<num); /* set the corresponding bit */
}
void eisa_make_irq_edge(int num)
{
if (eisa_irq_configured& (1<<num)) {
printk(KERN_WARNING
"IRQ %d polarity configured twice (last to edge)\n",
num);
}
eisa_irq_level &= ~(1<<num); /* clear the corresponding bit */
eisa_irq_configured |= (1<<num); /* set the corresponding bit */
}
static int __init eisa_irq_setup(char *str)
{
char *cur = str;
int val;
EISA_DBG("IRQ setup\n");
while (cur != NULL) {
char *pe;
val = (int) simple_strtoul(cur, &pe, 0);
if (val > 15 || val < 0) {
printk(KERN_ERR "eisa: EISA irq value are 0-15\n");
continue;
}
if (val == 2) {
val = 9;
}
eisa_make_irq_edge(val); /* clear the corresponding bit */
EISA_DBG("setting IRQ %d to edge-triggered mode\n", val);
if ((cur = strchr(cur, ','))) {
cur++;
} else {
break;
}
}
return 1;
}
__setup("eisa_irq_edge=", eisa_irq_setup);
View Git Blame Copy Permalink