88d3aafdae
For the operations get-tx-csum get-sg get-tso get-ufo the default ethtool_op_xxx behavior is fine for all drivers, so we permit op==NULL to imply the default behavior. This provides a more uniform behavior across all drivers, eliminating ethtool(8) "ioctl not supported" errors on older drivers that had not been updated for the latest sub-ioctls. The ethtool_op_xxx() functions are left exported, in case anyone wishes to call them directly from a driver-private implementation -- a not-uncommon case. Should an ethtool_op_xxx() helper remain unused for a while, except by net/core/ethtool.c, we can un-export it at a later date. [ Resolved conflicts with set/get value ethtool patch... -DaveM ] Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
1678 lines
48 KiB
C
1678 lines
48 KiB
C
/* winbond-840.c: A Linux PCI network adapter device driver. */
|
|
/*
|
|
Written 1998-2001 by Donald Becker.
|
|
|
|
This software may be used and distributed according to the terms of
|
|
the GNU General Public License (GPL), incorporated herein by reference.
|
|
Drivers based on or derived from this code fall under the GPL and must
|
|
retain the authorship, copyright and license notice. This file is not
|
|
a complete program and may only be used when the entire operating
|
|
system is licensed under the GPL.
|
|
|
|
The author may be reached as becker@scyld.com, or C/O
|
|
Scyld Computing Corporation
|
|
410 Severn Ave., Suite 210
|
|
Annapolis MD 21403
|
|
|
|
Support and updates available at
|
|
http://www.scyld.com/network/drivers.html
|
|
|
|
Do not remove the copyright information.
|
|
Do not change the version information unless an improvement has been made.
|
|
Merely removing my name, as Compex has done in the past, does not count
|
|
as an improvement.
|
|
|
|
Changelog:
|
|
* ported to 2.4
|
|
???
|
|
* spin lock update, memory barriers, new style dma mappings
|
|
limit each tx buffer to < 1024 bytes
|
|
remove DescIntr from Rx descriptors (that's an Tx flag)
|
|
remove next pointer from Tx descriptors
|
|
synchronize tx_q_bytes
|
|
software reset in tx_timeout
|
|
Copyright (C) 2000 Manfred Spraul
|
|
* further cleanups
|
|
power management.
|
|
support for big endian descriptors
|
|
Copyright (C) 2001 Manfred Spraul
|
|
* ethtool support (jgarzik)
|
|
* Replace some MII-related magic numbers with constants (jgarzik)
|
|
|
|
TODO:
|
|
* enable pci_power_off
|
|
* Wake-On-LAN
|
|
*/
|
|
|
|
#define DRV_NAME "winbond-840"
|
|
#define DRV_VERSION "1.01-e"
|
|
#define DRV_RELDATE "Sep-11-2006"
|
|
|
|
|
|
/* Automatically extracted configuration info:
|
|
probe-func: winbond840_probe
|
|
config-in: tristate 'Winbond W89c840 Ethernet support' CONFIG_WINBOND_840
|
|
|
|
c-help-name: Winbond W89c840 PCI Ethernet support
|
|
c-help-symbol: CONFIG_WINBOND_840
|
|
c-help: This driver is for the Winbond W89c840 chip. It also works with
|
|
c-help: the TX9882 chip on the Compex RL100-ATX board.
|
|
c-help: More specific information and updates are available from
|
|
c-help: http://www.scyld.com/network/drivers.html
|
|
*/
|
|
|
|
/* The user-configurable values.
|
|
These may be modified when a driver module is loaded.*/
|
|
|
|
static int debug = 1; /* 1 normal messages, 0 quiet .. 7 verbose. */
|
|
static int max_interrupt_work = 20;
|
|
/* Maximum number of multicast addresses to filter (vs. Rx-all-multicast).
|
|
The '840 uses a 64 element hash table based on the Ethernet CRC. */
|
|
static int multicast_filter_limit = 32;
|
|
|
|
/* Set the copy breakpoint for the copy-only-tiny-frames scheme.
|
|
Setting to > 1518 effectively disables this feature. */
|
|
static int rx_copybreak;
|
|
|
|
/* Used to pass the media type, etc.
|
|
Both 'options[]' and 'full_duplex[]' should exist for driver
|
|
interoperability.
|
|
The media type is usually passed in 'options[]'.
|
|
*/
|
|
#define MAX_UNITS 8 /* More are supported, limit only on options */
|
|
static int options[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
|
|
static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
|
|
|
|
/* Operational parameters that are set at compile time. */
|
|
|
|
/* Keep the ring sizes a power of two for compile efficiency.
|
|
The compiler will convert <unsigned>'%'<2^N> into a bit mask.
|
|
Making the Tx ring too large decreases the effectiveness of channel
|
|
bonding and packet priority.
|
|
There are no ill effects from too-large receive rings. */
|
|
#define TX_QUEUE_LEN 10 /* Limit ring entries actually used. */
|
|
#define TX_QUEUE_LEN_RESTART 5
|
|
|
|
#define TX_BUFLIMIT (1024-128)
|
|
|
|
/* The presumed FIFO size for working around the Tx-FIFO-overflow bug.
|
|
To avoid overflowing we don't queue again until we have room for a
|
|
full-size packet.
|
|
*/
|
|
#define TX_FIFO_SIZE (2048)
|
|
#define TX_BUG_FIFO_LIMIT (TX_FIFO_SIZE-1514-16)
|
|
|
|
|
|
/* Operational parameters that usually are not changed. */
|
|
/* Time in jiffies before concluding the transmitter is hung. */
|
|
#define TX_TIMEOUT (2*HZ)
|
|
|
|
#define PKT_BUF_SZ 1536 /* Size of each temporary Rx buffer.*/
|
|
|
|
/* Include files, designed to support most kernel versions 2.0.0 and later. */
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/string.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/mii.h>
|
|
#include <linux/rtnetlink.h>
|
|
#include <linux/crc32.h>
|
|
#include <linux/bitops.h>
|
|
#include <asm/uaccess.h>
|
|
#include <asm/processor.h> /* Processor type for cache alignment. */
|
|
#include <asm/io.h>
|
|
#include <asm/irq.h>
|
|
|
|
#include "tulip.h"
|
|
|
|
/* These identify the driver base version and may not be removed. */
|
|
static char version[] =
|
|
KERN_INFO DRV_NAME ".c:v" DRV_VERSION " (2.4 port) " DRV_RELDATE " Donald Becker <becker@scyld.com>\n"
|
|
KERN_INFO " http://www.scyld.com/network/drivers.html\n";
|
|
|
|
MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
|
|
MODULE_DESCRIPTION("Winbond W89c840 Ethernet driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_VERSION(DRV_VERSION);
|
|
|
|
module_param(max_interrupt_work, int, 0);
|
|
module_param(debug, int, 0);
|
|
module_param(rx_copybreak, int, 0);
|
|
module_param(multicast_filter_limit, int, 0);
|
|
module_param_array(options, int, NULL, 0);
|
|
module_param_array(full_duplex, int, NULL, 0);
|
|
MODULE_PARM_DESC(max_interrupt_work, "winbond-840 maximum events handled per interrupt");
|
|
MODULE_PARM_DESC(debug, "winbond-840 debug level (0-6)");
|
|
MODULE_PARM_DESC(rx_copybreak, "winbond-840 copy breakpoint for copy-only-tiny-frames");
|
|
MODULE_PARM_DESC(multicast_filter_limit, "winbond-840 maximum number of filtered multicast addresses");
|
|
MODULE_PARM_DESC(options, "winbond-840: Bits 0-3: media type, bit 17: full duplex");
|
|
MODULE_PARM_DESC(full_duplex, "winbond-840 full duplex setting(s) (1)");
|
|
|
|
/*
|
|
Theory of Operation
|
|
|
|
I. Board Compatibility
|
|
|
|
This driver is for the Winbond w89c840 chip.
|
|
|
|
II. Board-specific settings
|
|
|
|
None.
|
|
|
|
III. Driver operation
|
|
|
|
This chip is very similar to the Digital 21*4* "Tulip" family. The first
|
|
twelve registers and the descriptor format are nearly identical. Read a
|
|
Tulip manual for operational details.
|
|
|
|
A significant difference is that the multicast filter and station address are
|
|
stored in registers rather than loaded through a pseudo-transmit packet.
|
|
|
|
Unlike the Tulip, transmit buffers are limited to 1KB. To transmit a
|
|
full-sized packet we must use both data buffers in a descriptor. Thus the
|
|
driver uses ring mode where descriptors are implicitly sequential in memory,
|
|
rather than using the second descriptor address as a chain pointer to
|
|
subsequent descriptors.
|
|
|
|
IV. Notes
|
|
|
|
If you are going to almost clone a Tulip, why not go all the way and avoid
|
|
the need for a new driver?
|
|
|
|
IVb. References
|
|
|
|
http://www.scyld.com/expert/100mbps.html
|
|
http://www.scyld.com/expert/NWay.html
|
|
http://www.winbond.com.tw/
|
|
|
|
IVc. Errata
|
|
|
|
A horrible bug exists in the transmit FIFO. Apparently the chip doesn't
|
|
correctly detect a full FIFO, and queuing more than 2048 bytes may result in
|
|
silent data corruption.
|
|
|
|
Test with 'ping -s 10000' on a fast computer.
|
|
|
|
*/
|
|
|
|
|
|
|
|
/*
|
|
PCI probe table.
|
|
*/
|
|
enum chip_capability_flags {
|
|
CanHaveMII=1, HasBrokenTx=2, AlwaysFDX=4, FDXOnNoMII=8,
|
|
};
|
|
|
|
static const struct pci_device_id w840_pci_tbl[] = {
|
|
{ 0x1050, 0x0840, PCI_ANY_ID, 0x8153, 0, 0, 0 },
|
|
{ 0x1050, 0x0840, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 },
|
|
{ 0x11f6, 0x2011, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(pci, w840_pci_tbl);
|
|
|
|
enum {
|
|
netdev_res_size = 128, /* size of PCI BAR resource */
|
|
};
|
|
|
|
struct pci_id_info {
|
|
const char *name;
|
|
int drv_flags; /* Driver use, intended as capability flags. */
|
|
};
|
|
|
|
static const struct pci_id_info pci_id_tbl[] __devinitdata = {
|
|
{ /* Sometime a Level-One switch card. */
|
|
"Winbond W89c840", CanHaveMII | HasBrokenTx | FDXOnNoMII},
|
|
{ "Winbond W89c840", CanHaveMII | HasBrokenTx},
|
|
{ "Compex RL100-ATX", CanHaveMII | HasBrokenTx},
|
|
{ } /* terminate list. */
|
|
};
|
|
|
|
/* This driver was written to use PCI memory space, however some x86 systems
|
|
work only with I/O space accesses. See CONFIG_TULIP_MMIO in .config
|
|
*/
|
|
|
|
/* Offsets to the Command and Status Registers, "CSRs".
|
|
While similar to the Tulip, these registers are longword aligned.
|
|
Note: It's not useful to define symbolic names for every register bit in
|
|
the device. The name can only partially document the semantics and make
|
|
the driver longer and more difficult to read.
|
|
*/
|
|
enum w840_offsets {
|
|
PCIBusCfg=0x00, TxStartDemand=0x04, RxStartDemand=0x08,
|
|
RxRingPtr=0x0C, TxRingPtr=0x10,
|
|
IntrStatus=0x14, NetworkConfig=0x18, IntrEnable=0x1C,
|
|
RxMissed=0x20, EECtrl=0x24, MIICtrl=0x24, BootRom=0x28, GPTimer=0x2C,
|
|
CurRxDescAddr=0x30, CurRxBufAddr=0x34, /* Debug use */
|
|
MulticastFilter0=0x38, MulticastFilter1=0x3C, StationAddr=0x40,
|
|
CurTxDescAddr=0x4C, CurTxBufAddr=0x50,
|
|
};
|
|
|
|
/* Bits in the NetworkConfig register. */
|
|
enum rx_mode_bits {
|
|
AcceptErr=0x80,
|
|
RxAcceptBroadcast=0x20, AcceptMulticast=0x10,
|
|
RxAcceptAllPhys=0x08, AcceptMyPhys=0x02,
|
|
};
|
|
|
|
enum mii_reg_bits {
|
|
MDIO_ShiftClk=0x10000, MDIO_DataIn=0x80000, MDIO_DataOut=0x20000,
|
|
MDIO_EnbOutput=0x40000, MDIO_EnbIn = 0x00000,
|
|
};
|
|
|
|
/* The Tulip Rx and Tx buffer descriptors. */
|
|
struct w840_rx_desc {
|
|
s32 status;
|
|
s32 length;
|
|
u32 buffer1;
|
|
u32 buffer2;
|
|
};
|
|
|
|
struct w840_tx_desc {
|
|
s32 status;
|
|
s32 length;
|
|
u32 buffer1, buffer2;
|
|
};
|
|
|
|
#define MII_CNT 1 /* winbond only supports one MII */
|
|
struct netdev_private {
|
|
struct w840_rx_desc *rx_ring;
|
|
dma_addr_t rx_addr[RX_RING_SIZE];
|
|
struct w840_tx_desc *tx_ring;
|
|
dma_addr_t tx_addr[TX_RING_SIZE];
|
|
dma_addr_t ring_dma_addr;
|
|
/* The addresses of receive-in-place skbuffs. */
|
|
struct sk_buff* rx_skbuff[RX_RING_SIZE];
|
|
/* The saved address of a sent-in-place packet/buffer, for later free(). */
|
|
struct sk_buff* tx_skbuff[TX_RING_SIZE];
|
|
struct net_device_stats stats;
|
|
struct timer_list timer; /* Media monitoring timer. */
|
|
/* Frequently used values: keep some adjacent for cache effect. */
|
|
spinlock_t lock;
|
|
int chip_id, drv_flags;
|
|
struct pci_dev *pci_dev;
|
|
int csr6;
|
|
struct w840_rx_desc *rx_head_desc;
|
|
unsigned int cur_rx, dirty_rx; /* Producer/consumer ring indices */
|
|
unsigned int rx_buf_sz; /* Based on MTU+slack. */
|
|
unsigned int cur_tx, dirty_tx;
|
|
unsigned int tx_q_bytes;
|
|
unsigned int tx_full; /* The Tx queue is full. */
|
|
/* MII transceiver section. */
|
|
int mii_cnt; /* MII device addresses. */
|
|
unsigned char phys[MII_CNT]; /* MII device addresses, but only the first is used */
|
|
u32 mii;
|
|
struct mii_if_info mii_if;
|
|
void __iomem *base_addr;
|
|
};
|
|
|
|
static int eeprom_read(void __iomem *ioaddr, int location);
|
|
static int mdio_read(struct net_device *dev, int phy_id, int location);
|
|
static void mdio_write(struct net_device *dev, int phy_id, int location, int value);
|
|
static int netdev_open(struct net_device *dev);
|
|
static int update_link(struct net_device *dev);
|
|
static void netdev_timer(unsigned long data);
|
|
static void init_rxtx_rings(struct net_device *dev);
|
|
static void free_rxtx_rings(struct netdev_private *np);
|
|
static void init_registers(struct net_device *dev);
|
|
static void tx_timeout(struct net_device *dev);
|
|
static int alloc_ringdesc(struct net_device *dev);
|
|
static void free_ringdesc(struct netdev_private *np);
|
|
static int start_tx(struct sk_buff *skb, struct net_device *dev);
|
|
static irqreturn_t intr_handler(int irq, void *dev_instance);
|
|
static void netdev_error(struct net_device *dev, int intr_status);
|
|
static int netdev_rx(struct net_device *dev);
|
|
static u32 __set_rx_mode(struct net_device *dev);
|
|
static void set_rx_mode(struct net_device *dev);
|
|
static struct net_device_stats *get_stats(struct net_device *dev);
|
|
static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
|
|
static const struct ethtool_ops netdev_ethtool_ops;
|
|
static int netdev_close(struct net_device *dev);
|
|
|
|
|
|
|
|
static int __devinit w840_probe1 (struct pci_dev *pdev,
|
|
const struct pci_device_id *ent)
|
|
{
|
|
struct net_device *dev;
|
|
struct netdev_private *np;
|
|
static int find_cnt;
|
|
int chip_idx = ent->driver_data;
|
|
int irq;
|
|
int i, option = find_cnt < MAX_UNITS ? options[find_cnt] : 0;
|
|
void __iomem *ioaddr;
|
|
|
|
i = pci_enable_device(pdev);
|
|
if (i) return i;
|
|
|
|
pci_set_master(pdev);
|
|
|
|
irq = pdev->irq;
|
|
|
|
if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) {
|
|
printk(KERN_WARNING "Winbond-840: Device %s disabled due to DMA limitations.\n",
|
|
pci_name(pdev));
|
|
return -EIO;
|
|
}
|
|
dev = alloc_etherdev(sizeof(*np));
|
|
if (!dev)
|
|
return -ENOMEM;
|
|
SET_NETDEV_DEV(dev, &pdev->dev);
|
|
|
|
if (pci_request_regions(pdev, DRV_NAME))
|
|
goto err_out_netdev;
|
|
|
|
ioaddr = pci_iomap(pdev, TULIP_BAR, netdev_res_size);
|
|
if (!ioaddr)
|
|
goto err_out_free_res;
|
|
|
|
for (i = 0; i < 3; i++)
|
|
((u16 *)dev->dev_addr)[i] = le16_to_cpu(eeprom_read(ioaddr, i));
|
|
|
|
/* Reset the chip to erase previous misconfiguration.
|
|
No hold time required! */
|
|
iowrite32(0x00000001, ioaddr + PCIBusCfg);
|
|
|
|
dev->base_addr = (unsigned long)ioaddr;
|
|
dev->irq = irq;
|
|
|
|
np = netdev_priv(dev);
|
|
np->pci_dev = pdev;
|
|
np->chip_id = chip_idx;
|
|
np->drv_flags = pci_id_tbl[chip_idx].drv_flags;
|
|
spin_lock_init(&np->lock);
|
|
np->mii_if.dev = dev;
|
|
np->mii_if.mdio_read = mdio_read;
|
|
np->mii_if.mdio_write = mdio_write;
|
|
np->base_addr = ioaddr;
|
|
|
|
pci_set_drvdata(pdev, dev);
|
|
|
|
if (dev->mem_start)
|
|
option = dev->mem_start;
|
|
|
|
/* The lower four bits are the media type. */
|
|
if (option > 0) {
|
|
if (option & 0x200)
|
|
np->mii_if.full_duplex = 1;
|
|
if (option & 15)
|
|
printk(KERN_INFO "%s: ignoring user supplied media type %d",
|
|
dev->name, option & 15);
|
|
}
|
|
if (find_cnt < MAX_UNITS && full_duplex[find_cnt] > 0)
|
|
np->mii_if.full_duplex = 1;
|
|
|
|
if (np->mii_if.full_duplex)
|
|
np->mii_if.force_media = 1;
|
|
|
|
/* The chip-specific entries in the device structure. */
|
|
dev->open = &netdev_open;
|
|
dev->hard_start_xmit = &start_tx;
|
|
dev->stop = &netdev_close;
|
|
dev->get_stats = &get_stats;
|
|
dev->set_multicast_list = &set_rx_mode;
|
|
dev->do_ioctl = &netdev_ioctl;
|
|
dev->ethtool_ops = &netdev_ethtool_ops;
|
|
dev->tx_timeout = &tx_timeout;
|
|
dev->watchdog_timeo = TX_TIMEOUT;
|
|
|
|
i = register_netdev(dev);
|
|
if (i)
|
|
goto err_out_cleardev;
|
|
|
|
printk(KERN_INFO "%s: %s at %p, ",
|
|
dev->name, pci_id_tbl[chip_idx].name, ioaddr);
|
|
for (i = 0; i < 5; i++)
|
|
printk("%2.2x:", dev->dev_addr[i]);
|
|
printk("%2.2x, IRQ %d.\n", dev->dev_addr[i], irq);
|
|
|
|
if (np->drv_flags & CanHaveMII) {
|
|
int phy, phy_idx = 0;
|
|
for (phy = 1; phy < 32 && phy_idx < MII_CNT; phy++) {
|
|
int mii_status = mdio_read(dev, phy, MII_BMSR);
|
|
if (mii_status != 0xffff && mii_status != 0x0000) {
|
|
np->phys[phy_idx++] = phy;
|
|
np->mii_if.advertising = mdio_read(dev, phy, MII_ADVERTISE);
|
|
np->mii = (mdio_read(dev, phy, MII_PHYSID1) << 16)+
|
|
mdio_read(dev, phy, MII_PHYSID2);
|
|
printk(KERN_INFO "%s: MII PHY %8.8xh found at address %d, status "
|
|
"0x%4.4x advertising %4.4x.\n",
|
|
dev->name, np->mii, phy, mii_status, np->mii_if.advertising);
|
|
}
|
|
}
|
|
np->mii_cnt = phy_idx;
|
|
np->mii_if.phy_id = np->phys[0];
|
|
if (phy_idx == 0) {
|
|
printk(KERN_WARNING "%s: MII PHY not found -- this device may "
|
|
"not operate correctly.\n", dev->name);
|
|
}
|
|
}
|
|
|
|
find_cnt++;
|
|
return 0;
|
|
|
|
err_out_cleardev:
|
|
pci_set_drvdata(pdev, NULL);
|
|
pci_iounmap(pdev, ioaddr);
|
|
err_out_free_res:
|
|
pci_release_regions(pdev);
|
|
err_out_netdev:
|
|
free_netdev (dev);
|
|
return -ENODEV;
|
|
}
|
|
|
|
|
|
/* Read the EEPROM and MII Management Data I/O (MDIO) interfaces. These are
|
|
often serial bit streams generated by the host processor.
|
|
The example below is for the common 93c46 EEPROM, 64 16 bit words. */
|
|
|
|
/* Delay between EEPROM clock transitions.
|
|
No extra delay is needed with 33Mhz PCI, but future 66Mhz access may need
|
|
a delay. Note that pre-2.0.34 kernels had a cache-alignment bug that
|
|
made udelay() unreliable.
|
|
The old method of using an ISA access as a delay, __SLOW_DOWN_IO__, is
|
|
depricated.
|
|
*/
|
|
#define eeprom_delay(ee_addr) ioread32(ee_addr)
|
|
|
|
enum EEPROM_Ctrl_Bits {
|
|
EE_ShiftClk=0x02, EE_Write0=0x801, EE_Write1=0x805,
|
|
EE_ChipSelect=0x801, EE_DataIn=0x08,
|
|
};
|
|
|
|
/* The EEPROM commands include the alway-set leading bit. */
|
|
enum EEPROM_Cmds {
|
|
EE_WriteCmd=(5 << 6), EE_ReadCmd=(6 << 6), EE_EraseCmd=(7 << 6),
|
|
};
|
|
|
|
static int eeprom_read(void __iomem *addr, int location)
|
|
{
|
|
int i;
|
|
int retval = 0;
|
|
void __iomem *ee_addr = addr + EECtrl;
|
|
int read_cmd = location | EE_ReadCmd;
|
|
iowrite32(EE_ChipSelect, ee_addr);
|
|
|
|
/* Shift the read command bits out. */
|
|
for (i = 10; i >= 0; i--) {
|
|
short dataval = (read_cmd & (1 << i)) ? EE_Write1 : EE_Write0;
|
|
iowrite32(dataval, ee_addr);
|
|
eeprom_delay(ee_addr);
|
|
iowrite32(dataval | EE_ShiftClk, ee_addr);
|
|
eeprom_delay(ee_addr);
|
|
}
|
|
iowrite32(EE_ChipSelect, ee_addr);
|
|
eeprom_delay(ee_addr);
|
|
|
|
for (i = 16; i > 0; i--) {
|
|
iowrite32(EE_ChipSelect | EE_ShiftClk, ee_addr);
|
|
eeprom_delay(ee_addr);
|
|
retval = (retval << 1) | ((ioread32(ee_addr) & EE_DataIn) ? 1 : 0);
|
|
iowrite32(EE_ChipSelect, ee_addr);
|
|
eeprom_delay(ee_addr);
|
|
}
|
|
|
|
/* Terminate the EEPROM access. */
|
|
iowrite32(0, ee_addr);
|
|
return retval;
|
|
}
|
|
|
|
/* MII transceiver control section.
|
|
Read and write the MII registers using software-generated serial
|
|
MDIO protocol. See the MII specifications or DP83840A data sheet
|
|
for details.
|
|
|
|
The maximum data clock rate is 2.5 Mhz. The minimum timing is usually
|
|
met by back-to-back 33Mhz PCI cycles. */
|
|
#define mdio_delay(mdio_addr) ioread32(mdio_addr)
|
|
|
|
/* Set iff a MII transceiver on any interface requires mdio preamble.
|
|
This only set with older transceivers, so the extra
|
|
code size of a per-interface flag is not worthwhile. */
|
|
static char mii_preamble_required = 1;
|
|
|
|
#define MDIO_WRITE0 (MDIO_EnbOutput)
|
|
#define MDIO_WRITE1 (MDIO_DataOut | MDIO_EnbOutput)
|
|
|
|
/* Generate the preamble required for initial synchronization and
|
|
a few older transceivers. */
|
|
static void mdio_sync(void __iomem *mdio_addr)
|
|
{
|
|
int bits = 32;
|
|
|
|
/* Establish sync by sending at least 32 logic ones. */
|
|
while (--bits >= 0) {
|
|
iowrite32(MDIO_WRITE1, mdio_addr);
|
|
mdio_delay(mdio_addr);
|
|
iowrite32(MDIO_WRITE1 | MDIO_ShiftClk, mdio_addr);
|
|
mdio_delay(mdio_addr);
|
|
}
|
|
}
|
|
|
|
static int mdio_read(struct net_device *dev, int phy_id, int location)
|
|
{
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
void __iomem *mdio_addr = np->base_addr + MIICtrl;
|
|
int mii_cmd = (0xf6 << 10) | (phy_id << 5) | location;
|
|
int i, retval = 0;
|
|
|
|
if (mii_preamble_required)
|
|
mdio_sync(mdio_addr);
|
|
|
|
/* Shift the read command bits out. */
|
|
for (i = 15; i >= 0; i--) {
|
|
int dataval = (mii_cmd & (1 << i)) ? MDIO_WRITE1 : MDIO_WRITE0;
|
|
|
|
iowrite32(dataval, mdio_addr);
|
|
mdio_delay(mdio_addr);
|
|
iowrite32(dataval | MDIO_ShiftClk, mdio_addr);
|
|
mdio_delay(mdio_addr);
|
|
}
|
|
/* Read the two transition, 16 data, and wire-idle bits. */
|
|
for (i = 20; i > 0; i--) {
|
|
iowrite32(MDIO_EnbIn, mdio_addr);
|
|
mdio_delay(mdio_addr);
|
|
retval = (retval << 1) | ((ioread32(mdio_addr) & MDIO_DataIn) ? 1 : 0);
|
|
iowrite32(MDIO_EnbIn | MDIO_ShiftClk, mdio_addr);
|
|
mdio_delay(mdio_addr);
|
|
}
|
|
return (retval>>1) & 0xffff;
|
|
}
|
|
|
|
static void mdio_write(struct net_device *dev, int phy_id, int location, int value)
|
|
{
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
void __iomem *mdio_addr = np->base_addr + MIICtrl;
|
|
int mii_cmd = (0x5002 << 16) | (phy_id << 23) | (location<<18) | value;
|
|
int i;
|
|
|
|
if (location == 4 && phy_id == np->phys[0])
|
|
np->mii_if.advertising = value;
|
|
|
|
if (mii_preamble_required)
|
|
mdio_sync(mdio_addr);
|
|
|
|
/* Shift the command bits out. */
|
|
for (i = 31; i >= 0; i--) {
|
|
int dataval = (mii_cmd & (1 << i)) ? MDIO_WRITE1 : MDIO_WRITE0;
|
|
|
|
iowrite32(dataval, mdio_addr);
|
|
mdio_delay(mdio_addr);
|
|
iowrite32(dataval | MDIO_ShiftClk, mdio_addr);
|
|
mdio_delay(mdio_addr);
|
|
}
|
|
/* Clear out extra bits. */
|
|
for (i = 2; i > 0; i--) {
|
|
iowrite32(MDIO_EnbIn, mdio_addr);
|
|
mdio_delay(mdio_addr);
|
|
iowrite32(MDIO_EnbIn | MDIO_ShiftClk, mdio_addr);
|
|
mdio_delay(mdio_addr);
|
|
}
|
|
return;
|
|
}
|
|
|
|
|
|
static int netdev_open(struct net_device *dev)
|
|
{
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
void __iomem *ioaddr = np->base_addr;
|
|
int i;
|
|
|
|
iowrite32(0x00000001, ioaddr + PCIBusCfg); /* Reset */
|
|
|
|
netif_device_detach(dev);
|
|
i = request_irq(dev->irq, &intr_handler, IRQF_SHARED, dev->name, dev);
|
|
if (i)
|
|
goto out_err;
|
|
|
|
if (debug > 1)
|
|
printk(KERN_DEBUG "%s: w89c840_open() irq %d.\n",
|
|
dev->name, dev->irq);
|
|
|
|
if((i=alloc_ringdesc(dev)))
|
|
goto out_err;
|
|
|
|
spin_lock_irq(&np->lock);
|
|
netif_device_attach(dev);
|
|
init_registers(dev);
|
|
spin_unlock_irq(&np->lock);
|
|
|
|
netif_start_queue(dev);
|
|
if (debug > 2)
|
|
printk(KERN_DEBUG "%s: Done netdev_open().\n", dev->name);
|
|
|
|
/* Set the timer to check for link beat. */
|
|
init_timer(&np->timer);
|
|
np->timer.expires = jiffies + 1*HZ;
|
|
np->timer.data = (unsigned long)dev;
|
|
np->timer.function = &netdev_timer; /* timer handler */
|
|
add_timer(&np->timer);
|
|
return 0;
|
|
out_err:
|
|
netif_device_attach(dev);
|
|
return i;
|
|
}
|
|
|
|
#define MII_DAVICOM_DM9101 0x0181b800
|
|
|
|
static int update_link(struct net_device *dev)
|
|
{
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
int duplex, fasteth, result, mii_reg;
|
|
|
|
/* BSMR */
|
|
mii_reg = mdio_read(dev, np->phys[0], MII_BMSR);
|
|
|
|
if (mii_reg == 0xffff)
|
|
return np->csr6;
|
|
/* reread: the link status bit is sticky */
|
|
mii_reg = mdio_read(dev, np->phys[0], MII_BMSR);
|
|
if (!(mii_reg & 0x4)) {
|
|
if (netif_carrier_ok(dev)) {
|
|
if (debug)
|
|
printk(KERN_INFO "%s: MII #%d reports no link. Disabling watchdog.\n",
|
|
dev->name, np->phys[0]);
|
|
netif_carrier_off(dev);
|
|
}
|
|
return np->csr6;
|
|
}
|
|
if (!netif_carrier_ok(dev)) {
|
|
if (debug)
|
|
printk(KERN_INFO "%s: MII #%d link is back. Enabling watchdog.\n",
|
|
dev->name, np->phys[0]);
|
|
netif_carrier_on(dev);
|
|
}
|
|
|
|
if ((np->mii & ~0xf) == MII_DAVICOM_DM9101) {
|
|
/* If the link partner doesn't support autonegotiation
|
|
* the MII detects it's abilities with the "parallel detection".
|
|
* Some MIIs update the LPA register to the result of the parallel
|
|
* detection, some don't.
|
|
* The Davicom PHY [at least 0181b800] doesn't.
|
|
* Instead bit 9 and 13 of the BMCR are updated to the result
|
|
* of the negotiation..
|
|
*/
|
|
mii_reg = mdio_read(dev, np->phys[0], MII_BMCR);
|
|
duplex = mii_reg & BMCR_FULLDPLX;
|
|
fasteth = mii_reg & BMCR_SPEED100;
|
|
} else {
|
|
int negotiated;
|
|
mii_reg = mdio_read(dev, np->phys[0], MII_LPA);
|
|
negotiated = mii_reg & np->mii_if.advertising;
|
|
|
|
duplex = (negotiated & LPA_100FULL) || ((negotiated & 0x02C0) == LPA_10FULL);
|
|
fasteth = negotiated & 0x380;
|
|
}
|
|
duplex |= np->mii_if.force_media;
|
|
/* remove fastether and fullduplex */
|
|
result = np->csr6 & ~0x20000200;
|
|
if (duplex)
|
|
result |= 0x200;
|
|
if (fasteth)
|
|
result |= 0x20000000;
|
|
if (result != np->csr6 && debug)
|
|
printk(KERN_INFO "%s: Setting %dMBit-%s-duplex based on MII#%d\n",
|
|
dev->name, fasteth ? 100 : 10,
|
|
duplex ? "full" : "half", np->phys[0]);
|
|
return result;
|
|
}
|
|
|
|
#define RXTX_TIMEOUT 2000
|
|
static inline void update_csr6(struct net_device *dev, int new)
|
|
{
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
void __iomem *ioaddr = np->base_addr;
|
|
int limit = RXTX_TIMEOUT;
|
|
|
|
if (!netif_device_present(dev))
|
|
new = 0;
|
|
if (new==np->csr6)
|
|
return;
|
|
/* stop both Tx and Rx processes */
|
|
iowrite32(np->csr6 & ~0x2002, ioaddr + NetworkConfig);
|
|
/* wait until they have really stopped */
|
|
for (;;) {
|
|
int csr5 = ioread32(ioaddr + IntrStatus);
|
|
int t;
|
|
|
|
t = (csr5 >> 17) & 0x07;
|
|
if (t==0||t==1) {
|
|
/* rx stopped */
|
|
t = (csr5 >> 20) & 0x07;
|
|
if (t==0||t==1)
|
|
break;
|
|
}
|
|
|
|
limit--;
|
|
if(!limit) {
|
|
printk(KERN_INFO "%s: couldn't stop rxtx, IntrStatus %xh.\n",
|
|
dev->name, csr5);
|
|
break;
|
|
}
|
|
udelay(1);
|
|
}
|
|
np->csr6 = new;
|
|
/* and restart them with the new configuration */
|
|
iowrite32(np->csr6, ioaddr + NetworkConfig);
|
|
if (new & 0x200)
|
|
np->mii_if.full_duplex = 1;
|
|
}
|
|
|
|
static void netdev_timer(unsigned long data)
|
|
{
|
|
struct net_device *dev = (struct net_device *)data;
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
void __iomem *ioaddr = np->base_addr;
|
|
|
|
if (debug > 2)
|
|
printk(KERN_DEBUG "%s: Media selection timer tick, status %8.8x "
|
|
"config %8.8x.\n",
|
|
dev->name, ioread32(ioaddr + IntrStatus),
|
|
ioread32(ioaddr + NetworkConfig));
|
|
spin_lock_irq(&np->lock);
|
|
update_csr6(dev, update_link(dev));
|
|
spin_unlock_irq(&np->lock);
|
|
np->timer.expires = jiffies + 10*HZ;
|
|
add_timer(&np->timer);
|
|
}
|
|
|
|
static void init_rxtx_rings(struct net_device *dev)
|
|
{
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
int i;
|
|
|
|
np->rx_head_desc = &np->rx_ring[0];
|
|
np->tx_ring = (struct w840_tx_desc*)&np->rx_ring[RX_RING_SIZE];
|
|
|
|
/* Initial all Rx descriptors. */
|
|
for (i = 0; i < RX_RING_SIZE; i++) {
|
|
np->rx_ring[i].length = np->rx_buf_sz;
|
|
np->rx_ring[i].status = 0;
|
|
np->rx_skbuff[i] = NULL;
|
|
}
|
|
/* Mark the last entry as wrapping the ring. */
|
|
np->rx_ring[i-1].length |= DescEndRing;
|
|
|
|
/* Fill in the Rx buffers. Handle allocation failure gracefully. */
|
|
for (i = 0; i < RX_RING_SIZE; i++) {
|
|
struct sk_buff *skb = dev_alloc_skb(np->rx_buf_sz);
|
|
np->rx_skbuff[i] = skb;
|
|
if (skb == NULL)
|
|
break;
|
|
np->rx_addr[i] = pci_map_single(np->pci_dev,skb->data,
|
|
np->rx_buf_sz,PCI_DMA_FROMDEVICE);
|
|
|
|
np->rx_ring[i].buffer1 = np->rx_addr[i];
|
|
np->rx_ring[i].status = DescOwned;
|
|
}
|
|
|
|
np->cur_rx = 0;
|
|
np->dirty_rx = (unsigned int)(i - RX_RING_SIZE);
|
|
|
|
/* Initialize the Tx descriptors */
|
|
for (i = 0; i < TX_RING_SIZE; i++) {
|
|
np->tx_skbuff[i] = NULL;
|
|
np->tx_ring[i].status = 0;
|
|
}
|
|
np->tx_full = 0;
|
|
np->tx_q_bytes = np->dirty_tx = np->cur_tx = 0;
|
|
|
|
iowrite32(np->ring_dma_addr, np->base_addr + RxRingPtr);
|
|
iowrite32(np->ring_dma_addr+sizeof(struct w840_rx_desc)*RX_RING_SIZE,
|
|
np->base_addr + TxRingPtr);
|
|
|
|
}
|
|
|
|
static void free_rxtx_rings(struct netdev_private* np)
|
|
{
|
|
int i;
|
|
/* Free all the skbuffs in the Rx queue. */
|
|
for (i = 0; i < RX_RING_SIZE; i++) {
|
|
np->rx_ring[i].status = 0;
|
|
if (np->rx_skbuff[i]) {
|
|
pci_unmap_single(np->pci_dev,
|
|
np->rx_addr[i],
|
|
np->rx_skbuff[i]->len,
|
|
PCI_DMA_FROMDEVICE);
|
|
dev_kfree_skb(np->rx_skbuff[i]);
|
|
}
|
|
np->rx_skbuff[i] = NULL;
|
|
}
|
|
for (i = 0; i < TX_RING_SIZE; i++) {
|
|
if (np->tx_skbuff[i]) {
|
|
pci_unmap_single(np->pci_dev,
|
|
np->tx_addr[i],
|
|
np->tx_skbuff[i]->len,
|
|
PCI_DMA_TODEVICE);
|
|
dev_kfree_skb(np->tx_skbuff[i]);
|
|
}
|
|
np->tx_skbuff[i] = NULL;
|
|
}
|
|
}
|
|
|
|
static void init_registers(struct net_device *dev)
|
|
{
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
void __iomem *ioaddr = np->base_addr;
|
|
int i;
|
|
|
|
for (i = 0; i < 6; i++)
|
|
iowrite8(dev->dev_addr[i], ioaddr + StationAddr + i);
|
|
|
|
/* Initialize other registers. */
|
|
#ifdef __BIG_ENDIAN
|
|
i = (1<<20); /* Big-endian descriptors */
|
|
#else
|
|
i = 0;
|
|
#endif
|
|
i |= (0x04<<2); /* skip length 4 u32 */
|
|
i |= 0x02; /* give Rx priority */
|
|
|
|
/* Configure the PCI bus bursts and FIFO thresholds.
|
|
486: Set 8 longword cache alignment, 8 longword burst.
|
|
586: Set 16 longword cache alignment, no burst limit.
|
|
Cache alignment bits 15:14 Burst length 13:8
|
|
0000 <not allowed> 0000 align to cache 0800 8 longwords
|
|
4000 8 longwords 0100 1 longword 1000 16 longwords
|
|
8000 16 longwords 0200 2 longwords 2000 32 longwords
|
|
C000 32 longwords 0400 4 longwords */
|
|
|
|
#if defined (__i386__) && !defined(MODULE)
|
|
/* When not a module we can work around broken '486 PCI boards. */
|
|
if (boot_cpu_data.x86 <= 4) {
|
|
i |= 0x4800;
|
|
printk(KERN_INFO "%s: This is a 386/486 PCI system, setting cache "
|
|
"alignment to 8 longwords.\n", dev->name);
|
|
} else {
|
|
i |= 0xE000;
|
|
}
|
|
#elif defined(__powerpc__) || defined(__i386__) || defined(__alpha__) || defined(__ia64__) || defined(__x86_64__)
|
|
i |= 0xE000;
|
|
#elif defined(CONFIG_SPARC) || defined (CONFIG_PARISC)
|
|
i |= 0x4800;
|
|
#else
|
|
#warning Processor architecture undefined
|
|
i |= 0x4800;
|
|
#endif
|
|
iowrite32(i, ioaddr + PCIBusCfg);
|
|
|
|
np->csr6 = 0;
|
|
/* 128 byte Tx threshold;
|
|
Transmit on; Receive on; */
|
|
update_csr6(dev, 0x00022002 | update_link(dev) | __set_rx_mode(dev));
|
|
|
|
/* Clear and Enable interrupts by setting the interrupt mask. */
|
|
iowrite32(0x1A0F5, ioaddr + IntrStatus);
|
|
iowrite32(0x1A0F5, ioaddr + IntrEnable);
|
|
|
|
iowrite32(0, ioaddr + RxStartDemand);
|
|
}
|
|
|
|
static void tx_timeout(struct net_device *dev)
|
|
{
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
void __iomem *ioaddr = np->base_addr;
|
|
|
|
printk(KERN_WARNING "%s: Transmit timed out, status %8.8x,"
|
|
" resetting...\n", dev->name, ioread32(ioaddr + IntrStatus));
|
|
|
|
{
|
|
int i;
|
|
printk(KERN_DEBUG " Rx ring %p: ", np->rx_ring);
|
|
for (i = 0; i < RX_RING_SIZE; i++)
|
|
printk(" %8.8x", (unsigned int)np->rx_ring[i].status);
|
|
printk("\n"KERN_DEBUG" Tx ring %p: ", np->tx_ring);
|
|
for (i = 0; i < TX_RING_SIZE; i++)
|
|
printk(" %8.8x", np->tx_ring[i].status);
|
|
printk("\n");
|
|
}
|
|
printk(KERN_DEBUG "Tx cur %d Tx dirty %d Tx Full %d, q bytes %d.\n",
|
|
np->cur_tx, np->dirty_tx, np->tx_full, np->tx_q_bytes);
|
|
printk(KERN_DEBUG "Tx Descriptor addr %xh.\n",ioread32(ioaddr+0x4C));
|
|
|
|
disable_irq(dev->irq);
|
|
spin_lock_irq(&np->lock);
|
|
/*
|
|
* Under high load dirty_tx and the internal tx descriptor pointer
|
|
* come out of sync, thus perform a software reset and reinitialize
|
|
* everything.
|
|
*/
|
|
|
|
iowrite32(1, np->base_addr+PCIBusCfg);
|
|
udelay(1);
|
|
|
|
free_rxtx_rings(np);
|
|
init_rxtx_rings(dev);
|
|
init_registers(dev);
|
|
spin_unlock_irq(&np->lock);
|
|
enable_irq(dev->irq);
|
|
|
|
netif_wake_queue(dev);
|
|
dev->trans_start = jiffies;
|
|
np->stats.tx_errors++;
|
|
return;
|
|
}
|
|
|
|
/* Initialize the Rx and Tx rings, along with various 'dev' bits. */
|
|
static int alloc_ringdesc(struct net_device *dev)
|
|
{
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
|
|
np->rx_buf_sz = (dev->mtu <= 1500 ? PKT_BUF_SZ : dev->mtu + 32);
|
|
|
|
np->rx_ring = pci_alloc_consistent(np->pci_dev,
|
|
sizeof(struct w840_rx_desc)*RX_RING_SIZE +
|
|
sizeof(struct w840_tx_desc)*TX_RING_SIZE,
|
|
&np->ring_dma_addr);
|
|
if(!np->rx_ring)
|
|
return -ENOMEM;
|
|
init_rxtx_rings(dev);
|
|
return 0;
|
|
}
|
|
|
|
static void free_ringdesc(struct netdev_private *np)
|
|
{
|
|
pci_free_consistent(np->pci_dev,
|
|
sizeof(struct w840_rx_desc)*RX_RING_SIZE +
|
|
sizeof(struct w840_tx_desc)*TX_RING_SIZE,
|
|
np->rx_ring, np->ring_dma_addr);
|
|
|
|
}
|
|
|
|
static int start_tx(struct sk_buff *skb, struct net_device *dev)
|
|
{
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
unsigned entry;
|
|
|
|
/* Caution: the write order is important here, set the field
|
|
with the "ownership" bits last. */
|
|
|
|
/* Calculate the next Tx descriptor entry. */
|
|
entry = np->cur_tx % TX_RING_SIZE;
|
|
|
|
np->tx_addr[entry] = pci_map_single(np->pci_dev,
|
|
skb->data,skb->len, PCI_DMA_TODEVICE);
|
|
np->tx_skbuff[entry] = skb;
|
|
|
|
np->tx_ring[entry].buffer1 = np->tx_addr[entry];
|
|
if (skb->len < TX_BUFLIMIT) {
|
|
np->tx_ring[entry].length = DescWholePkt | skb->len;
|
|
} else {
|
|
int len = skb->len - TX_BUFLIMIT;
|
|
|
|
np->tx_ring[entry].buffer2 = np->tx_addr[entry]+TX_BUFLIMIT;
|
|
np->tx_ring[entry].length = DescWholePkt | (len << 11) | TX_BUFLIMIT;
|
|
}
|
|
if(entry == TX_RING_SIZE-1)
|
|
np->tx_ring[entry].length |= DescEndRing;
|
|
|
|
/* Now acquire the irq spinlock.
|
|
* The difficult race is the ordering between
|
|
* increasing np->cur_tx and setting DescOwned:
|
|
* - if np->cur_tx is increased first the interrupt
|
|
* handler could consider the packet as transmitted
|
|
* since DescOwned is cleared.
|
|
* - If DescOwned is set first the NIC could report the
|
|
* packet as sent, but the interrupt handler would ignore it
|
|
* since the np->cur_tx was not yet increased.
|
|
*/
|
|
spin_lock_irq(&np->lock);
|
|
np->cur_tx++;
|
|
|
|
wmb(); /* flush length, buffer1, buffer2 */
|
|
np->tx_ring[entry].status = DescOwned;
|
|
wmb(); /* flush status and kick the hardware */
|
|
iowrite32(0, np->base_addr + TxStartDemand);
|
|
np->tx_q_bytes += skb->len;
|
|
/* Work around horrible bug in the chip by marking the queue as full
|
|
when we do not have FIFO room for a maximum sized packet. */
|
|
if (np->cur_tx - np->dirty_tx > TX_QUEUE_LEN ||
|
|
((np->drv_flags & HasBrokenTx) && np->tx_q_bytes > TX_BUG_FIFO_LIMIT)) {
|
|
netif_stop_queue(dev);
|
|
wmb();
|
|
np->tx_full = 1;
|
|
}
|
|
spin_unlock_irq(&np->lock);
|
|
|
|
dev->trans_start = jiffies;
|
|
|
|
if (debug > 4) {
|
|
printk(KERN_DEBUG "%s: Transmit frame #%d queued in slot %d.\n",
|
|
dev->name, np->cur_tx, entry);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void netdev_tx_done(struct net_device *dev)
|
|
{
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
for (; np->cur_tx - np->dirty_tx > 0; np->dirty_tx++) {
|
|
int entry = np->dirty_tx % TX_RING_SIZE;
|
|
int tx_status = np->tx_ring[entry].status;
|
|
|
|
if (tx_status < 0)
|
|
break;
|
|
if (tx_status & 0x8000) { /* There was an error, log it. */
|
|
#ifndef final_version
|
|
if (debug > 1)
|
|
printk(KERN_DEBUG "%s: Transmit error, Tx status %8.8x.\n",
|
|
dev->name, tx_status);
|
|
#endif
|
|
np->stats.tx_errors++;
|
|
if (tx_status & 0x0104) np->stats.tx_aborted_errors++;
|
|
if (tx_status & 0x0C80) np->stats.tx_carrier_errors++;
|
|
if (tx_status & 0x0200) np->stats.tx_window_errors++;
|
|
if (tx_status & 0x0002) np->stats.tx_fifo_errors++;
|
|
if ((tx_status & 0x0080) && np->mii_if.full_duplex == 0)
|
|
np->stats.tx_heartbeat_errors++;
|
|
} else {
|
|
#ifndef final_version
|
|
if (debug > 3)
|
|
printk(KERN_DEBUG "%s: Transmit slot %d ok, Tx status %8.8x.\n",
|
|
dev->name, entry, tx_status);
|
|
#endif
|
|
np->stats.tx_bytes += np->tx_skbuff[entry]->len;
|
|
np->stats.collisions += (tx_status >> 3) & 15;
|
|
np->stats.tx_packets++;
|
|
}
|
|
/* Free the original skb. */
|
|
pci_unmap_single(np->pci_dev,np->tx_addr[entry],
|
|
np->tx_skbuff[entry]->len,
|
|
PCI_DMA_TODEVICE);
|
|
np->tx_q_bytes -= np->tx_skbuff[entry]->len;
|
|
dev_kfree_skb_irq(np->tx_skbuff[entry]);
|
|
np->tx_skbuff[entry] = NULL;
|
|
}
|
|
if (np->tx_full &&
|
|
np->cur_tx - np->dirty_tx < TX_QUEUE_LEN_RESTART &&
|
|
np->tx_q_bytes < TX_BUG_FIFO_LIMIT) {
|
|
/* The ring is no longer full, clear tbusy. */
|
|
np->tx_full = 0;
|
|
wmb();
|
|
netif_wake_queue(dev);
|
|
}
|
|
}
|
|
|
|
/* The interrupt handler does all of the Rx thread work and cleans up
|
|
after the Tx thread. */
|
|
static irqreturn_t intr_handler(int irq, void *dev_instance)
|
|
{
|
|
struct net_device *dev = (struct net_device *)dev_instance;
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
void __iomem *ioaddr = np->base_addr;
|
|
int work_limit = max_interrupt_work;
|
|
int handled = 0;
|
|
|
|
if (!netif_device_present(dev))
|
|
return IRQ_NONE;
|
|
do {
|
|
u32 intr_status = ioread32(ioaddr + IntrStatus);
|
|
|
|
/* Acknowledge all of the current interrupt sources ASAP. */
|
|
iowrite32(intr_status & 0x001ffff, ioaddr + IntrStatus);
|
|
|
|
if (debug > 4)
|
|
printk(KERN_DEBUG "%s: Interrupt, status %4.4x.\n",
|
|
dev->name, intr_status);
|
|
|
|
if ((intr_status & (NormalIntr|AbnormalIntr)) == 0)
|
|
break;
|
|
|
|
handled = 1;
|
|
|
|
if (intr_status & (RxIntr | RxNoBuf))
|
|
netdev_rx(dev);
|
|
if (intr_status & RxNoBuf)
|
|
iowrite32(0, ioaddr + RxStartDemand);
|
|
|
|
if (intr_status & (TxNoBuf | TxIntr) &&
|
|
np->cur_tx != np->dirty_tx) {
|
|
spin_lock(&np->lock);
|
|
netdev_tx_done(dev);
|
|
spin_unlock(&np->lock);
|
|
}
|
|
|
|
/* Abnormal error summary/uncommon events handlers. */
|
|
if (intr_status & (AbnormalIntr | TxFIFOUnderflow | SystemError |
|
|
TimerInt | TxDied))
|
|
netdev_error(dev, intr_status);
|
|
|
|
if (--work_limit < 0) {
|
|
printk(KERN_WARNING "%s: Too much work at interrupt, "
|
|
"status=0x%4.4x.\n", dev->name, intr_status);
|
|
/* Set the timer to re-enable the other interrupts after
|
|
10*82usec ticks. */
|
|
spin_lock(&np->lock);
|
|
if (netif_device_present(dev)) {
|
|
iowrite32(AbnormalIntr | TimerInt, ioaddr + IntrEnable);
|
|
iowrite32(10, ioaddr + GPTimer);
|
|
}
|
|
spin_unlock(&np->lock);
|
|
break;
|
|
}
|
|
} while (1);
|
|
|
|
if (debug > 3)
|
|
printk(KERN_DEBUG "%s: exiting interrupt, status=%#4.4x.\n",
|
|
dev->name, ioread32(ioaddr + IntrStatus));
|
|
return IRQ_RETVAL(handled);
|
|
}
|
|
|
|
/* This routine is logically part of the interrupt handler, but separated
|
|
for clarity and better register allocation. */
|
|
static int netdev_rx(struct net_device *dev)
|
|
{
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
int entry = np->cur_rx % RX_RING_SIZE;
|
|
int work_limit = np->dirty_rx + RX_RING_SIZE - np->cur_rx;
|
|
|
|
if (debug > 4) {
|
|
printk(KERN_DEBUG " In netdev_rx(), entry %d status %4.4x.\n",
|
|
entry, np->rx_ring[entry].status);
|
|
}
|
|
|
|
/* If EOP is set on the next entry, it's a new packet. Send it up. */
|
|
while (--work_limit >= 0) {
|
|
struct w840_rx_desc *desc = np->rx_head_desc;
|
|
s32 status = desc->status;
|
|
|
|
if (debug > 4)
|
|
printk(KERN_DEBUG " netdev_rx() status was %8.8x.\n",
|
|
status);
|
|
if (status < 0)
|
|
break;
|
|
if ((status & 0x38008300) != 0x0300) {
|
|
if ((status & 0x38000300) != 0x0300) {
|
|
/* Ingore earlier buffers. */
|
|
if ((status & 0xffff) != 0x7fff) {
|
|
printk(KERN_WARNING "%s: Oversized Ethernet frame spanned "
|
|
"multiple buffers, entry %#x status %4.4x!\n",
|
|
dev->name, np->cur_rx, status);
|
|
np->stats.rx_length_errors++;
|
|
}
|
|
} else if (status & 0x8000) {
|
|
/* There was a fatal error. */
|
|
if (debug > 2)
|
|
printk(KERN_DEBUG "%s: Receive error, Rx status %8.8x.\n",
|
|
dev->name, status);
|
|
np->stats.rx_errors++; /* end of a packet.*/
|
|
if (status & 0x0890) np->stats.rx_length_errors++;
|
|
if (status & 0x004C) np->stats.rx_frame_errors++;
|
|
if (status & 0x0002) np->stats.rx_crc_errors++;
|
|
}
|
|
} else {
|
|
struct sk_buff *skb;
|
|
/* Omit the four octet CRC from the length. */
|
|
int pkt_len = ((status >> 16) & 0x7ff) - 4;
|
|
|
|
#ifndef final_version
|
|
if (debug > 4)
|
|
printk(KERN_DEBUG " netdev_rx() normal Rx pkt length %d"
|
|
" status %x.\n", pkt_len, status);
|
|
#endif
|
|
/* Check if the packet is long enough to accept without copying
|
|
to a minimally-sized skbuff. */
|
|
if (pkt_len < rx_copybreak
|
|
&& (skb = dev_alloc_skb(pkt_len + 2)) != NULL) {
|
|
skb_reserve(skb, 2); /* 16 byte align the IP header */
|
|
pci_dma_sync_single_for_cpu(np->pci_dev,np->rx_addr[entry],
|
|
np->rx_skbuff[entry]->len,
|
|
PCI_DMA_FROMDEVICE);
|
|
skb_copy_to_linear_data(skb, np->rx_skbuff[entry]->data, pkt_len);
|
|
skb_put(skb, pkt_len);
|
|
pci_dma_sync_single_for_device(np->pci_dev,np->rx_addr[entry],
|
|
np->rx_skbuff[entry]->len,
|
|
PCI_DMA_FROMDEVICE);
|
|
} else {
|
|
pci_unmap_single(np->pci_dev,np->rx_addr[entry],
|
|
np->rx_skbuff[entry]->len,
|
|
PCI_DMA_FROMDEVICE);
|
|
skb_put(skb = np->rx_skbuff[entry], pkt_len);
|
|
np->rx_skbuff[entry] = NULL;
|
|
}
|
|
#ifndef final_version /* Remove after testing. */
|
|
/* You will want this info for the initial debug. */
|
|
if (debug > 5)
|
|
printk(KERN_DEBUG " Rx data %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:"
|
|
"%2.2x %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x %2.2x%2.2x "
|
|
"%d.%d.%d.%d.\n",
|
|
skb->data[0], skb->data[1], skb->data[2], skb->data[3],
|
|
skb->data[4], skb->data[5], skb->data[6], skb->data[7],
|
|
skb->data[8], skb->data[9], skb->data[10],
|
|
skb->data[11], skb->data[12], skb->data[13],
|
|
skb->data[14], skb->data[15], skb->data[16],
|
|
skb->data[17]);
|
|
#endif
|
|
skb->protocol = eth_type_trans(skb, dev);
|
|
netif_rx(skb);
|
|
dev->last_rx = jiffies;
|
|
np->stats.rx_packets++;
|
|
np->stats.rx_bytes += pkt_len;
|
|
}
|
|
entry = (++np->cur_rx) % RX_RING_SIZE;
|
|
np->rx_head_desc = &np->rx_ring[entry];
|
|
}
|
|
|
|
/* Refill the Rx ring buffers. */
|
|
for (; np->cur_rx - np->dirty_rx > 0; np->dirty_rx++) {
|
|
struct sk_buff *skb;
|
|
entry = np->dirty_rx % RX_RING_SIZE;
|
|
if (np->rx_skbuff[entry] == NULL) {
|
|
skb = dev_alloc_skb(np->rx_buf_sz);
|
|
np->rx_skbuff[entry] = skb;
|
|
if (skb == NULL)
|
|
break; /* Better luck next round. */
|
|
np->rx_addr[entry] = pci_map_single(np->pci_dev,
|
|
skb->data,
|
|
np->rx_buf_sz, PCI_DMA_FROMDEVICE);
|
|
np->rx_ring[entry].buffer1 = np->rx_addr[entry];
|
|
}
|
|
wmb();
|
|
np->rx_ring[entry].status = DescOwned;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void netdev_error(struct net_device *dev, int intr_status)
|
|
{
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
void __iomem *ioaddr = np->base_addr;
|
|
|
|
if (debug > 2)
|
|
printk(KERN_DEBUG "%s: Abnormal event, %8.8x.\n",
|
|
dev->name, intr_status);
|
|
if (intr_status == 0xffffffff)
|
|
return;
|
|
spin_lock(&np->lock);
|
|
if (intr_status & TxFIFOUnderflow) {
|
|
int new;
|
|
/* Bump up the Tx threshold */
|
|
#if 0
|
|
/* This causes lots of dropped packets,
|
|
* and under high load even tx_timeouts
|
|
*/
|
|
new = np->csr6 + 0x4000;
|
|
#else
|
|
new = (np->csr6 >> 14)&0x7f;
|
|
if (new < 64)
|
|
new *= 2;
|
|
else
|
|
new = 127; /* load full packet before starting */
|
|
new = (np->csr6 & ~(0x7F << 14)) | (new<<14);
|
|
#endif
|
|
printk(KERN_DEBUG "%s: Tx underflow, new csr6 %8.8x.\n",
|
|
dev->name, new);
|
|
update_csr6(dev, new);
|
|
}
|
|
if (intr_status & RxDied) { /* Missed a Rx frame. */
|
|
np->stats.rx_errors++;
|
|
}
|
|
if (intr_status & TimerInt) {
|
|
/* Re-enable other interrupts. */
|
|
if (netif_device_present(dev))
|
|
iowrite32(0x1A0F5, ioaddr + IntrEnable);
|
|
}
|
|
np->stats.rx_missed_errors += ioread32(ioaddr + RxMissed) & 0xffff;
|
|
iowrite32(0, ioaddr + RxStartDemand);
|
|
spin_unlock(&np->lock);
|
|
}
|
|
|
|
static struct net_device_stats *get_stats(struct net_device *dev)
|
|
{
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
void __iomem *ioaddr = np->base_addr;
|
|
|
|
/* The chip only need report frame silently dropped. */
|
|
spin_lock_irq(&np->lock);
|
|
if (netif_running(dev) && netif_device_present(dev))
|
|
np->stats.rx_missed_errors += ioread32(ioaddr + RxMissed) & 0xffff;
|
|
spin_unlock_irq(&np->lock);
|
|
|
|
return &np->stats;
|
|
}
|
|
|
|
|
|
static u32 __set_rx_mode(struct net_device *dev)
|
|
{
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
void __iomem *ioaddr = np->base_addr;
|
|
u32 mc_filter[2]; /* Multicast hash filter */
|
|
u32 rx_mode;
|
|
|
|
if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */
|
|
memset(mc_filter, 0xff, sizeof(mc_filter));
|
|
rx_mode = RxAcceptBroadcast | AcceptMulticast | RxAcceptAllPhys
|
|
| AcceptMyPhys;
|
|
} else if ((dev->mc_count > multicast_filter_limit)
|
|
|| (dev->flags & IFF_ALLMULTI)) {
|
|
/* Too many to match, or accept all multicasts. */
|
|
memset(mc_filter, 0xff, sizeof(mc_filter));
|
|
rx_mode = RxAcceptBroadcast | AcceptMulticast | AcceptMyPhys;
|
|
} else {
|
|
struct dev_mc_list *mclist;
|
|
int i;
|
|
memset(mc_filter, 0, sizeof(mc_filter));
|
|
for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
|
|
i++, mclist = mclist->next) {
|
|
int filterbit = (ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26) ^ 0x3F;
|
|
filterbit &= 0x3f;
|
|
mc_filter[filterbit >> 5] |= 1 << (filterbit & 31);
|
|
}
|
|
rx_mode = RxAcceptBroadcast | AcceptMulticast | AcceptMyPhys;
|
|
}
|
|
iowrite32(mc_filter[0], ioaddr + MulticastFilter0);
|
|
iowrite32(mc_filter[1], ioaddr + MulticastFilter1);
|
|
return rx_mode;
|
|
}
|
|
|
|
static void set_rx_mode(struct net_device *dev)
|
|
{
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
u32 rx_mode = __set_rx_mode(dev);
|
|
spin_lock_irq(&np->lock);
|
|
update_csr6(dev, (np->csr6 & ~0x00F8) | rx_mode);
|
|
spin_unlock_irq(&np->lock);
|
|
}
|
|
|
|
static void netdev_get_drvinfo (struct net_device *dev, struct ethtool_drvinfo *info)
|
|
{
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
|
|
strcpy (info->driver, DRV_NAME);
|
|
strcpy (info->version, DRV_VERSION);
|
|
strcpy (info->bus_info, pci_name(np->pci_dev));
|
|
}
|
|
|
|
static int netdev_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
|
|
{
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
int rc;
|
|
|
|
spin_lock_irq(&np->lock);
|
|
rc = mii_ethtool_gset(&np->mii_if, cmd);
|
|
spin_unlock_irq(&np->lock);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int netdev_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
|
|
{
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
int rc;
|
|
|
|
spin_lock_irq(&np->lock);
|
|
rc = mii_ethtool_sset(&np->mii_if, cmd);
|
|
spin_unlock_irq(&np->lock);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int netdev_nway_reset(struct net_device *dev)
|
|
{
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
return mii_nway_restart(&np->mii_if);
|
|
}
|
|
|
|
static u32 netdev_get_link(struct net_device *dev)
|
|
{
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
return mii_link_ok(&np->mii_if);
|
|
}
|
|
|
|
static u32 netdev_get_msglevel(struct net_device *dev)
|
|
{
|
|
return debug;
|
|
}
|
|
|
|
static void netdev_set_msglevel(struct net_device *dev, u32 value)
|
|
{
|
|
debug = value;
|
|
}
|
|
|
|
static const struct ethtool_ops netdev_ethtool_ops = {
|
|
.get_drvinfo = netdev_get_drvinfo,
|
|
.get_settings = netdev_get_settings,
|
|
.set_settings = netdev_set_settings,
|
|
.nway_reset = netdev_nway_reset,
|
|
.get_link = netdev_get_link,
|
|
.get_msglevel = netdev_get_msglevel,
|
|
.set_msglevel = netdev_set_msglevel,
|
|
};
|
|
|
|
static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
|
|
{
|
|
struct mii_ioctl_data *data = if_mii(rq);
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
|
|
switch(cmd) {
|
|
case SIOCGMIIPHY: /* Get address of MII PHY in use. */
|
|
data->phy_id = ((struct netdev_private *)netdev_priv(dev))->phys[0] & 0x1f;
|
|
/* Fall Through */
|
|
|
|
case SIOCGMIIREG: /* Read MII PHY register. */
|
|
spin_lock_irq(&np->lock);
|
|
data->val_out = mdio_read(dev, data->phy_id & 0x1f, data->reg_num & 0x1f);
|
|
spin_unlock_irq(&np->lock);
|
|
return 0;
|
|
|
|
case SIOCSMIIREG: /* Write MII PHY register. */
|
|
if (!capable(CAP_NET_ADMIN))
|
|
return -EPERM;
|
|
spin_lock_irq(&np->lock);
|
|
mdio_write(dev, data->phy_id & 0x1f, data->reg_num & 0x1f, data->val_in);
|
|
spin_unlock_irq(&np->lock);
|
|
return 0;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
|
|
static int netdev_close(struct net_device *dev)
|
|
{
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
void __iomem *ioaddr = np->base_addr;
|
|
|
|
netif_stop_queue(dev);
|
|
|
|
if (debug > 1) {
|
|
printk(KERN_DEBUG "%s: Shutting down ethercard, status was %8.8x "
|
|
"Config %8.8x.\n", dev->name, ioread32(ioaddr + IntrStatus),
|
|
ioread32(ioaddr + NetworkConfig));
|
|
printk(KERN_DEBUG "%s: Queue pointers were Tx %d / %d, Rx %d / %d.\n",
|
|
dev->name, np->cur_tx, np->dirty_tx, np->cur_rx, np->dirty_rx);
|
|
}
|
|
|
|
/* Stop the chip's Tx and Rx processes. */
|
|
spin_lock_irq(&np->lock);
|
|
netif_device_detach(dev);
|
|
update_csr6(dev, 0);
|
|
iowrite32(0x0000, ioaddr + IntrEnable);
|
|
spin_unlock_irq(&np->lock);
|
|
|
|
free_irq(dev->irq, dev);
|
|
wmb();
|
|
netif_device_attach(dev);
|
|
|
|
if (ioread32(ioaddr + NetworkConfig) != 0xffffffff)
|
|
np->stats.rx_missed_errors += ioread32(ioaddr + RxMissed) & 0xffff;
|
|
|
|
#ifdef __i386__
|
|
if (debug > 2) {
|
|
int i;
|
|
|
|
printk(KERN_DEBUG" Tx ring at %8.8x:\n",
|
|
(int)np->tx_ring);
|
|
for (i = 0; i < TX_RING_SIZE; i++)
|
|
printk(KERN_DEBUG " #%d desc. %4.4x %4.4x %8.8x.\n",
|
|
i, np->tx_ring[i].length,
|
|
np->tx_ring[i].status, np->tx_ring[i].buffer1);
|
|
printk("\n"KERN_DEBUG " Rx ring %8.8x:\n",
|
|
(int)np->rx_ring);
|
|
for (i = 0; i < RX_RING_SIZE; i++) {
|
|
printk(KERN_DEBUG " #%d desc. %4.4x %4.4x %8.8x\n",
|
|
i, np->rx_ring[i].length,
|
|
np->rx_ring[i].status, np->rx_ring[i].buffer1);
|
|
}
|
|
}
|
|
#endif /* __i386__ debugging only */
|
|
|
|
del_timer_sync(&np->timer);
|
|
|
|
free_rxtx_rings(np);
|
|
free_ringdesc(np);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void __devexit w840_remove1 (struct pci_dev *pdev)
|
|
{
|
|
struct net_device *dev = pci_get_drvdata(pdev);
|
|
|
|
if (dev) {
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
unregister_netdev(dev);
|
|
pci_release_regions(pdev);
|
|
pci_iounmap(pdev, np->base_addr);
|
|
free_netdev(dev);
|
|
}
|
|
|
|
pci_set_drvdata(pdev, NULL);
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
|
|
/*
|
|
* suspend/resume synchronization:
|
|
* - open, close, do_ioctl:
|
|
* rtnl_lock, & netif_device_detach after the rtnl_unlock.
|
|
* - get_stats:
|
|
* spin_lock_irq(np->lock), doesn't touch hw if not present
|
|
* - hard_start_xmit:
|
|
* synchronize_irq + netif_tx_disable;
|
|
* - tx_timeout:
|
|
* netif_device_detach + netif_tx_disable;
|
|
* - set_multicast_list
|
|
* netif_device_detach + netif_tx_disable;
|
|
* - interrupt handler
|
|
* doesn't touch hw if not present, synchronize_irq waits for
|
|
* running instances of the interrupt handler.
|
|
*
|
|
* Disabling hw requires clearing csr6 & IntrEnable.
|
|
* update_csr6 & all function that write IntrEnable check netif_device_present
|
|
* before settings any bits.
|
|
*
|
|
* Detach must occur under spin_unlock_irq(), interrupts from a detached
|
|
* device would cause an irq storm.
|
|
*/
|
|
static int w840_suspend (struct pci_dev *pdev, pm_message_t state)
|
|
{
|
|
struct net_device *dev = pci_get_drvdata (pdev);
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
void __iomem *ioaddr = np->base_addr;
|
|
|
|
rtnl_lock();
|
|
if (netif_running (dev)) {
|
|
del_timer_sync(&np->timer);
|
|
|
|
spin_lock_irq(&np->lock);
|
|
netif_device_detach(dev);
|
|
update_csr6(dev, 0);
|
|
iowrite32(0, ioaddr + IntrEnable);
|
|
spin_unlock_irq(&np->lock);
|
|
|
|
synchronize_irq(dev->irq);
|
|
netif_tx_disable(dev);
|
|
|
|
np->stats.rx_missed_errors += ioread32(ioaddr + RxMissed) & 0xffff;
|
|
|
|
/* no more hardware accesses behind this line. */
|
|
|
|
BUG_ON(np->csr6);
|
|
if (ioread32(ioaddr + IntrEnable)) BUG();
|
|
|
|
/* pci_power_off(pdev, -1); */
|
|
|
|
free_rxtx_rings(np);
|
|
} else {
|
|
netif_device_detach(dev);
|
|
}
|
|
rtnl_unlock();
|
|
return 0;
|
|
}
|
|
|
|
static int w840_resume (struct pci_dev *pdev)
|
|
{
|
|
struct net_device *dev = pci_get_drvdata (pdev);
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
int retval = 0;
|
|
|
|
rtnl_lock();
|
|
if (netif_device_present(dev))
|
|
goto out; /* device not suspended */
|
|
if (netif_running(dev)) {
|
|
if ((retval = pci_enable_device(pdev))) {
|
|
printk (KERN_ERR
|
|
"%s: pci_enable_device failed in resume\n",
|
|
dev->name);
|
|
goto out;
|
|
}
|
|
spin_lock_irq(&np->lock);
|
|
iowrite32(1, np->base_addr+PCIBusCfg);
|
|
ioread32(np->base_addr+PCIBusCfg);
|
|
udelay(1);
|
|
netif_device_attach(dev);
|
|
init_rxtx_rings(dev);
|
|
init_registers(dev);
|
|
spin_unlock_irq(&np->lock);
|
|
|
|
netif_wake_queue(dev);
|
|
|
|
mod_timer(&np->timer, jiffies + 1*HZ);
|
|
} else {
|
|
netif_device_attach(dev);
|
|
}
|
|
out:
|
|
rtnl_unlock();
|
|
return retval;
|
|
}
|
|
#endif
|
|
|
|
static struct pci_driver w840_driver = {
|
|
.name = DRV_NAME,
|
|
.id_table = w840_pci_tbl,
|
|
.probe = w840_probe1,
|
|
.remove = __devexit_p(w840_remove1),
|
|
#ifdef CONFIG_PM
|
|
.suspend = w840_suspend,
|
|
.resume = w840_resume,
|
|
#endif
|
|
};
|
|
|
|
static int __init w840_init(void)
|
|
{
|
|
printk(version);
|
|
return pci_register_driver(&w840_driver);
|
|
}
|
|
|
|
static void __exit w840_exit(void)
|
|
{
|
|
pci_unregister_driver(&w840_driver);
|
|
}
|
|
|
|
module_init(w840_init);
|
|
module_exit(w840_exit);
|