kevin/linux
1
Fork 0
Code
881ac6a535
linux/drivers/net/wireless/ath/ath9k/ar9003_phy.c
Luis R. Rodriguez aea702b70a ath9k_hw: add support for the AR9003 baseband watchdog 
The baseband watchdog will monitor blocks of the baseband
through timers and will issue an interrupt when things are
detected to be stalled. It is only available on the AR9003
family.

Cc: Sam Ng <sam.ng@atheros.com>
Cc: Paul Shaw <paul.shaw@atheros.com>
Cc: Don Breslin <don.breslin@atheros.com>
Cc: Cliff Holden <cliff.holden@atheros.com
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-02 16:13:00 -04:00

1254 lines
36 KiB
C
Raw Blame History

/*
* Copyright (c) 2010 Atheros Communications Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#include "hw.h"
#include "ar9003_phy.h"
/**
* ar9003_hw_set_channel - set channel on single-chip device
* @ah: atheros hardware structure
* @chan:
*
* This is the function to change channel on single-chip devices, that is
* all devices after ar9280.
*
* This function takes the channel value in MHz and sets
* hardware channel value. Assumes writes have been enabled to analog bus.
*
* Actual Expression,
*
* For 2GHz channel,
* Channel Frequency = (3/4) * freq_ref * (chansel[8:0] + chanfrac[16:0]/2^17)
* (freq_ref = 40MHz)
*
* For 5GHz channel,
* Channel Frequency = (3/2) * freq_ref * (chansel[8:0] + chanfrac[16:0]/2^10)
* (freq_ref = 40MHz/(24>>amodeRefSel))
*
* For 5GHz channels which are 5MHz spaced,
* Channel Frequency = (3/2) * freq_ref * (chansel[8:0] + chanfrac[16:0]/2^17)
* (freq_ref = 40MHz)
*/
static int ar9003_hw_set_channel(struct ath_hw *ah, struct ath9k_channel *chan)
{
u16 bMode, fracMode = 0, aModeRefSel = 0;
u32 freq, channelSel = 0, reg32 = 0;
struct chan_centers centers;
int loadSynthChannel;
ath9k_hw_get_channel_centers(ah, chan, &centers);
freq = centers.synth_center;
if (freq < 4800) { /* 2 GHz, fractional mode */
channelSel = CHANSEL_2G(freq);
/* Set to 2G mode */
bMode = 1;
} else {
channelSel = CHANSEL_5G(freq);
/* Doubler is ON, so, divide channelSel by 2. */
channelSel >>= 1;
/* Set to 5G mode */
bMode = 0;
}
/* Enable fractional mode for all channels */
fracMode = 1;
aModeRefSel = 0;
loadSynthChannel = 0;
reg32 = (bMode << 29);
REG_WRITE(ah, AR_PHY_SYNTH_CONTROL, reg32);
/* Enable Long shift Select for Synthesizer */
REG_RMW_FIELD(ah, AR_PHY_65NM_CH0_SYNTH4,
AR_PHY_SYNTH4_LONG_SHIFT_SELECT, 1);
/* Program Synth. setting */
reg32 = (channelSel << 2) | (fracMode << 30) |
(aModeRefSel << 28) | (loadSynthChannel << 31);
REG_WRITE(ah, AR_PHY_65NM_CH0_SYNTH7, reg32);
/* Toggle Load Synth channel bit */
loadSynthChannel = 1;
reg32 = (channelSel << 2) | (fracMode << 30) |
(aModeRefSel << 28) | (loadSynthChannel << 31);
REG_WRITE(ah, AR_PHY_65NM_CH0_SYNTH7, reg32);
ah->curchan = chan;
ah->curchan_rad_index = -1;
return 0;
}
/**
* ar9003_hw_spur_mitigate - convert baseband spur frequency
* @ah: atheros hardware structure
* @chan:
*
* For single-chip solutions. Converts to baseband spur frequency given the
* input channel frequency and compute register settings below.
*
* Spur mitigation for MRC CCK
*/
static void ar9003_hw_spur_mitigate_mrc_cck(struct ath_hw *ah,
struct ath9k_channel *chan)
{
u32 spur_freq[4] = { 2420, 2440, 2464, 2480 };
int cur_bb_spur, negative = 0, cck_spur_freq;
int i;
/*
* Need to verify range +/- 10 MHz in control channel, otherwise spur
* is out-of-band and can be ignored.
*/
for (i = 0; i < 4; i++) {
negative = 0;
cur_bb_spur = spur_freq[i] - chan->channel;
if (cur_bb_spur < 0) {
negative = 1;
cur_bb_spur = -cur_bb_spur;
}
if (cur_bb_spur < 10) {
cck_spur_freq = (int)((cur_bb_spur << 19) / 11);
if (negative == 1)
cck_spur_freq = -cck_spur_freq;
cck_spur_freq = cck_spur_freq & 0xfffff;
REG_RMW_FIELD(ah, AR_PHY_AGC_CONTROL,
AR_PHY_AGC_CONTROL_YCOK_MAX, 0x7);
REG_RMW_FIELD(ah, AR_PHY_CCK_SPUR_MIT,
AR_PHY_CCK_SPUR_MIT_SPUR_RSSI_THR, 0x7f);
REG_RMW_FIELD(ah, AR_PHY_CCK_SPUR_MIT,
AR_PHY_CCK_SPUR_MIT_SPUR_FILTER_TYPE,
0x2);
REG_RMW_FIELD(ah, AR_PHY_CCK_SPUR_MIT,
AR_PHY_CCK_SPUR_MIT_USE_CCK_SPUR_MIT,
0x1);
REG_RMW_FIELD(ah, AR_PHY_CCK_SPUR_MIT,
AR_PHY_CCK_SPUR_MIT_CCK_SPUR_FREQ,
cck_spur_freq);
return;
}
}
REG_RMW_FIELD(ah, AR_PHY_AGC_CONTROL,
AR_PHY_AGC_CONTROL_YCOK_MAX, 0x5);
REG_RMW_FIELD(ah, AR_PHY_CCK_SPUR_MIT,
AR_PHY_CCK_SPUR_MIT_USE_CCK_SPUR_MIT, 0x0);
REG_RMW_FIELD(ah, AR_PHY_CCK_SPUR_MIT,
AR_PHY_CCK_SPUR_MIT_CCK_SPUR_FREQ, 0x0);
}
/* Clean all spur register fields */
static void ar9003_hw_spur_ofdm_clear(struct ath_hw *ah)
{
REG_RMW_FIELD(ah, AR_PHY_TIMING4,
AR_PHY_TIMING4_ENABLE_SPUR_FILTER, 0);
REG_RMW_FIELD(ah, AR_PHY_TIMING11,
AR_PHY_TIMING11_SPUR_FREQ_SD, 0);
REG_RMW_FIELD(ah, AR_PHY_TIMING11,
AR_PHY_TIMING11_SPUR_DELTA_PHASE, 0);
REG_RMW_FIELD(ah, AR_PHY_SFCORR_EXT,
AR_PHY_SFCORR_EXT_SPUR_SUBCHANNEL_SD, 0);
REG_RMW_FIELD(ah, AR_PHY_TIMING11,
AR_PHY_TIMING11_USE_SPUR_FILTER_IN_AGC, 0);
REG_RMW_FIELD(ah, AR_PHY_TIMING11,
AR_PHY_TIMING11_USE_SPUR_FILTER_IN_SELFCOR, 0);
REG_RMW_FIELD(ah, AR_PHY_TIMING4,
AR_PHY_TIMING4_ENABLE_SPUR_RSSI, 0);
REG_RMW_FIELD(ah, AR_PHY_SPUR_REG,
AR_PHY_SPUR_REG_EN_VIT_SPUR_RSSI, 0);
REG_RMW_FIELD(ah, AR_PHY_SPUR_REG,
AR_PHY_SPUR_REG_ENABLE_NF_RSSI_SPUR_MIT, 0);
REG_RMW_FIELD(ah, AR_PHY_SPUR_REG,
AR_PHY_SPUR_REG_ENABLE_MASK_PPM, 0);
REG_RMW_FIELD(ah, AR_PHY_TIMING4,
AR_PHY_TIMING4_ENABLE_PILOT_MASK, 0);
REG_RMW_FIELD(ah, AR_PHY_TIMING4,
AR_PHY_TIMING4_ENABLE_CHAN_MASK, 0);
REG_RMW_FIELD(ah, AR_PHY_PILOT_SPUR_MASK,
AR_PHY_PILOT_SPUR_MASK_CF_PILOT_MASK_IDX_A, 0);
REG_RMW_FIELD(ah, AR_PHY_SPUR_MASK_A,
AR_PHY_SPUR_MASK_A_CF_PUNC_MASK_IDX_A, 0);
REG_RMW_FIELD(ah, AR_PHY_CHAN_SPUR_MASK,
AR_PHY_CHAN_SPUR_MASK_CF_CHAN_MASK_IDX_A, 0);
REG_RMW_FIELD(ah, AR_PHY_PILOT_SPUR_MASK,
AR_PHY_PILOT_SPUR_MASK_CF_PILOT_MASK_A, 0);
REG_RMW_FIELD(ah, AR_PHY_CHAN_SPUR_MASK,
AR_PHY_CHAN_SPUR_MASK_CF_CHAN_MASK_A, 0);
REG_RMW_FIELD(ah, AR_PHY_SPUR_MASK_A,
AR_PHY_SPUR_MASK_A_CF_PUNC_MASK_A, 0);
REG_RMW_FIELD(ah, AR_PHY_SPUR_REG,
AR_PHY_SPUR_REG_MASK_RATE_CNTL, 0);
}
static void ar9003_hw_spur_ofdm(struct ath_hw *ah,
int freq_offset,
int spur_freq_sd,
int spur_delta_phase,
int spur_subchannel_sd)
{
int mask_index = 0;
/* OFDM Spur mitigation */
REG_RMW_FIELD(ah, AR_PHY_TIMING4,
AR_PHY_TIMING4_ENABLE_SPUR_FILTER, 0x1);
REG_RMW_FIELD(ah, AR_PHY_TIMING11,
AR_PHY_TIMING11_SPUR_FREQ_SD, spur_freq_sd);
REG_RMW_FIELD(ah, AR_PHY_TIMING11,
AR_PHY_TIMING11_SPUR_DELTA_PHASE, spur_delta_phase);
REG_RMW_FIELD(ah, AR_PHY_SFCORR_EXT,
AR_PHY_SFCORR_EXT_SPUR_SUBCHANNEL_SD, spur_subchannel_sd);
REG_RMW_FIELD(ah, AR_PHY_TIMING11,
AR_PHY_TIMING11_USE_SPUR_FILTER_IN_AGC, 0x1);
REG_RMW_FIELD(ah, AR_PHY_TIMING11,
AR_PHY_TIMING11_USE_SPUR_FILTER_IN_SELFCOR, 0x1);
REG_RMW_FIELD(ah, AR_PHY_TIMING4,
AR_PHY_TIMING4_ENABLE_SPUR_RSSI, 0x1);
REG_RMW_FIELD(ah, AR_PHY_SPUR_REG,
AR_PHY_SPUR_REG_SPUR_RSSI_THRESH, 34);
REG_RMW_FIELD(ah, AR_PHY_SPUR_REG,
AR_PHY_SPUR_REG_EN_VIT_SPUR_RSSI, 1);
if (REG_READ_FIELD(ah, AR_PHY_MODE,
AR_PHY_MODE_DYNAMIC) == 0x1)
REG_RMW_FIELD(ah, AR_PHY_SPUR_REG,
AR_PHY_SPUR_REG_ENABLE_NF_RSSI_SPUR_MIT, 1);
mask_index = (freq_offset << 4) / 5;
if (mask_index < 0)
mask_index = mask_index - 1;
mask_index = mask_index & 0x7f;
REG_RMW_FIELD(ah, AR_PHY_SPUR_REG,
AR_PHY_SPUR_REG_ENABLE_MASK_PPM, 0x1);
REG_RMW_FIELD(ah, AR_PHY_TIMING4,
AR_PHY_TIMING4_ENABLE_PILOT_MASK, 0x1);
REG_RMW_FIELD(ah, AR_PHY_TIMING4,
AR_PHY_TIMING4_ENABLE_CHAN_MASK, 0x1);
REG_RMW_FIELD(ah, AR_PHY_PILOT_SPUR_MASK,
AR_PHY_PILOT_SPUR_MASK_CF_PILOT_MASK_IDX_A, mask_index);
REG_RMW_FIELD(ah, AR_PHY_SPUR_MASK_A,
AR_PHY_SPUR_MASK_A_CF_PUNC_MASK_IDX_A, mask_index);
REG_RMW_FIELD(ah, AR_PHY_CHAN_SPUR_MASK,
AR_PHY_CHAN_SPUR_MASK_CF_CHAN_MASK_IDX_A, mask_index);
REG_RMW_FIELD(ah, AR_PHY_PILOT_SPUR_MASK,
AR_PHY_PILOT_SPUR_MASK_CF_PILOT_MASK_A, 0xc);
REG_RMW_FIELD(ah, AR_PHY_CHAN_SPUR_MASK,
AR_PHY_CHAN_SPUR_MASK_CF_CHAN_MASK_A, 0xc);
REG_RMW_FIELD(ah, AR_PHY_SPUR_MASK_A,
AR_PHY_SPUR_MASK_A_CF_PUNC_MASK_A, 0xa0);
REG_RMW_FIELD(ah, AR_PHY_SPUR_REG,
AR_PHY_SPUR_REG_MASK_RATE_CNTL, 0xff);
}
static void ar9003_hw_spur_ofdm_work(struct ath_hw *ah,
struct ath9k_channel *chan,
int freq_offset)
{
int spur_freq_sd = 0;
int spur_subchannel_sd = 0;
int spur_delta_phase = 0;
if (IS_CHAN_HT40(chan)) {
if (freq_offset < 0) {
if (REG_READ_FIELD(ah, AR_PHY_GEN_CTRL,
AR_PHY_GC_DYN2040_PRI_CH) == 0x0)
spur_subchannel_sd = 1;
else
spur_subchannel_sd = 0;
spur_freq_sd = ((freq_offset + 10) << 9) / 11;
} else {
if (REG_READ_FIELD(ah, AR_PHY_GEN_CTRL,
AR_PHY_GC_DYN2040_PRI_CH) == 0x0)
spur_subchannel_sd = 0;
else
spur_subchannel_sd = 1;
spur_freq_sd = ((freq_offset - 10) << 9) / 11;
}
spur_delta_phase = (freq_offset << 17) / 5;
} else {
spur_subchannel_sd = 0;
spur_freq_sd = (freq_offset << 9) /11;
spur_delta_phase = (freq_offset << 18) / 5;
}
spur_freq_sd = spur_freq_sd & 0x3ff;
spur_delta_phase = spur_delta_phase & 0xfffff;
ar9003_hw_spur_ofdm(ah,
freq_offset,
spur_freq_sd,
spur_delta_phase,
spur_subchannel_sd);
}
/* Spur mitigation for OFDM */
static void ar9003_hw_spur_mitigate_ofdm(struct ath_hw *ah,
struct ath9k_channel *chan)
{
int synth_freq;
int range = 10;
int freq_offset = 0;
int mode;
u8* spurChansPtr;
unsigned int i;
struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
if (IS_CHAN_5GHZ(chan)) {
spurChansPtr = &(eep->modalHeader5G.spurChans[0]);
mode = 0;
}
else {
spurChansPtr = &(eep->modalHeader2G.spurChans[0]);
mode = 1;
}
if (spurChansPtr[0] == 0)
return; /* No spur in the mode */
if (IS_CHAN_HT40(chan)) {
range = 19;
if (REG_READ_FIELD(ah, AR_PHY_GEN_CTRL,
AR_PHY_GC_DYN2040_PRI_CH) == 0x0)
synth_freq = chan->channel - 10;
else
synth_freq = chan->channel + 10;
} else {
range = 10;
synth_freq = chan->channel;
}
ar9003_hw_spur_ofdm_clear(ah);
for (i = 0; spurChansPtr[i] && i < 5; i++) {
freq_offset = FBIN2FREQ(spurChansPtr[i], mode) - synth_freq;
if (abs(freq_offset) < range) {
ar9003_hw_spur_ofdm_work(ah, chan, freq_offset);
break;
}
}
}
static void ar9003_hw_spur_mitigate(struct ath_hw *ah,
struct ath9k_channel *chan)
{
ar9003_hw_spur_mitigate_mrc_cck(ah, chan);
ar9003_hw_spur_mitigate_ofdm(ah, chan);
}
static u32 ar9003_hw_compute_pll_control(struct ath_hw *ah,
struct ath9k_channel *chan)
{
u32 pll;
pll = SM(0x5, AR_RTC_9300_PLL_REFDIV);
if (chan && IS_CHAN_HALF_RATE(chan))
pll |= SM(0x1, AR_RTC_9300_PLL_CLKSEL);
else if (chan && IS_CHAN_QUARTER_RATE(chan))
pll |= SM(0x2, AR_RTC_9300_PLL_CLKSEL);
pll |= SM(0x2c, AR_RTC_9300_PLL_DIV);
return pll;
}
static void ar9003_hw_set_channel_regs(struct ath_hw *ah,
struct ath9k_channel *chan)
{
u32 phymode;
u32 enableDacFifo = 0;
enableDacFifo =
(REG_READ(ah, AR_PHY_GEN_CTRL) & AR_PHY_GC_ENABLE_DAC_FIFO);
/* Enable 11n HT, 20 MHz */
phymode = AR_PHY_GC_HT_EN | AR_PHY_GC_SINGLE_HT_LTF1 | AR_PHY_GC_WALSH |
AR_PHY_GC_SHORT_GI_40 | enableDacFifo;
/* Configure baseband for dynamic 20/40 operation */
if (IS_CHAN_HT40(chan)) {
phymode |= AR_PHY_GC_DYN2040_EN;
/* Configure control (primary) channel at +-10MHz */
if ((chan->chanmode == CHANNEL_A_HT40PLUS) ||
(chan->chanmode == CHANNEL_G_HT40PLUS))
phymode |= AR_PHY_GC_DYN2040_PRI_CH;
}
/* make sure we preserve INI settings */
phymode |= REG_READ(ah, AR_PHY_GEN_CTRL);
/* turn off Green Field detection for STA for now */
phymode &= ~AR_PHY_GC_GF_DETECT_EN;
REG_WRITE(ah, AR_PHY_GEN_CTRL, phymode);
/* Configure MAC for 20/40 operation */
ath9k_hw_set11nmac2040(ah);
/* global transmit timeout (25 TUs default)*/
REG_WRITE(ah, AR_GTXTO, 25 << AR_GTXTO_TIMEOUT_LIMIT_S);
/* carrier sense timeout */
REG_WRITE(ah, AR_CST, 0xF << AR_CST_TIMEOUT_LIMIT_S);
}
static void ar9003_hw_init_bb(struct ath_hw *ah,
struct ath9k_channel *chan)
{
u32 synthDelay;
/*
* Wait for the frequency synth to settle (synth goes on
* via AR_PHY_ACTIVE_EN). Read the phy active delay register.
* Value is in 100ns increments.
*/
synthDelay = REG_READ(ah, AR_PHY_RX_DELAY) & AR_PHY_RX_DELAY_DELAY;
if (IS_CHAN_B(chan))
synthDelay = (4 * synthDelay) / 22;
else
synthDelay /= 10;
/* Activate the PHY (includes baseband activate + synthesizer on) */
REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_EN);
/*
* There is an issue if the AP starts the calibration before
* the base band timeout completes. This could result in the
* rx_clear false triggering. As a workaround we add delay an
* extra BASE_ACTIVATE_DELAY usecs to ensure this condition
* does not happen.
*/
udelay(synthDelay + BASE_ACTIVATE_DELAY);
}
void ar9003_hw_set_chain_masks(struct ath_hw *ah, u8 rx, u8 tx)
{
switch (rx) {
case 0x5:
REG_SET_BIT(ah, AR_PHY_ANALOG_SWAP,
AR_PHY_SWAP_ALT_CHAIN);
case 0x3:
case 0x1:
case 0x2:
case 0x7:
REG_WRITE(ah, AR_PHY_RX_CHAINMASK, rx);
REG_WRITE(ah, AR_PHY_CAL_CHAINMASK, rx);
break;
default:
break;
}
REG_WRITE(ah, AR_SELFGEN_MASK, tx);
if (tx == 0x5) {
REG_SET_BIT(ah, AR_PHY_ANALOG_SWAP,
AR_PHY_SWAP_ALT_CHAIN);
}
}
/*
* Override INI values with chip specific configuration.
*/
static void ar9003_hw_override_ini(struct ath_hw *ah)
{
u32 val;
/*
* Set the RX_ABORT and RX_DIS and clear it only after
* RXE is set for MAC. This prevents frames with
* corrupted descriptor status.
*/
REG_SET_BIT(ah, AR_DIAG_SW, (AR_DIAG_RX_DIS | AR_DIAG_RX_ABORT));
/*
* For AR9280 and above, there is a new feature that allows
* Multicast search based on both MAC Address and Key ID. By default,
* this feature is enabled. But since the driver is not using this
* feature, we switch it off; otherwise multicast search based on
* MAC addr only will fail.
*/
val = REG_READ(ah, AR_PCU_MISC_MODE2) & (~AR_ADHOC_MCAST_KEYID_ENABLE);
REG_WRITE(ah, AR_PCU_MISC_MODE2,
val | AR_AGG_WEP_ENABLE_FIX | AR_AGG_WEP_ENABLE);
}
static void ar9003_hw_prog_ini(struct ath_hw *ah,
struct ar5416IniArray *iniArr,
int column)
{
unsigned int i, regWrites = 0;
/* New INI format: Array may be undefined (pre, core, post arrays) */
if (!iniArr->ia_array)
return;
/*
* New INI format: Pre, core, and post arrays for a given subsystem
* may be modal (> 2 columns) or non-modal (2 columns). Determine if
* the array is non-modal and force the column to 1.
*/
if (column >= iniArr->ia_columns)
column = 1;
for (i = 0; i < iniArr->ia_rows; i++) {
u32 reg = INI_RA(iniArr, i, 0);
u32 val = INI_RA(iniArr, i, column);
REG_WRITE(ah, reg, val);
/*
* Determine if this is a shift register value, and insert the
* configured delay if so.
*/
if (reg >= 0x16000 && reg < 0x17000
&& ah->config.analog_shiftreg)
udelay(100);
DO_DELAY(regWrites);
}
}
static int ar9003_hw_process_ini(struct ath_hw *ah,
struct ath9k_channel *chan)
{
struct ath_regulatory *regulatory = ath9k_hw_regulatory(ah);
unsigned int regWrites = 0, i;
struct ieee80211_channel *channel = chan->chan;
u32 modesIndex, freqIndex;
switch (chan->chanmode) {
case CHANNEL_A:
case CHANNEL_A_HT20:
modesIndex = 1;
freqIndex = 1;
break;
case CHANNEL_A_HT40PLUS:
case CHANNEL_A_HT40MINUS:
modesIndex = 2;
freqIndex = 1;
break;
case CHANNEL_G:
case CHANNEL_G_HT20:
case CHANNEL_B:
modesIndex = 4;
freqIndex = 2;
break;
case CHANNEL_G_HT40PLUS:
case CHANNEL_G_HT40MINUS:
modesIndex = 3;
freqIndex = 2;
break;
default:
return -EINVAL;
}
for (i = 0; i < ATH_INI_NUM_SPLIT; i++) {
ar9003_hw_prog_ini(ah, &ah->iniSOC[i], modesIndex);
ar9003_hw_prog_ini(ah, &ah->iniMac[i], modesIndex);
ar9003_hw_prog_ini(ah, &ah->iniBB[i], modesIndex);
ar9003_hw_prog_ini(ah, &ah->iniRadio[i], modesIndex);
}
REG_WRITE_ARRAY(&ah->iniModesRxGain, 1, regWrites);
REG_WRITE_ARRAY(&ah->iniModesTxGain, modesIndex, regWrites);
/*
* For 5GHz channels requiring Fast Clock, apply
* different modal values.
*/
if (IS_CHAN_A_FAST_CLOCK(ah, chan))
REG_WRITE_ARRAY(&ah->iniModesAdditional,
modesIndex, regWrites);
ar9003_hw_override_ini(ah);
ar9003_hw_set_channel_regs(ah, chan);
ar9003_hw_set_chain_masks(ah, ah->rxchainmask, ah->txchainmask);
/* Set TX power */
ah->eep_ops->set_txpower(ah, chan,
ath9k_regd_get_ctl(regulatory, chan),
channel->max_antenna_gain * 2,
channel->max_power * 2,
min((u32) MAX_RATE_POWER,
(u32) regulatory->power_limit));
return 0;
}
static void ar9003_hw_set_rfmode(struct ath_hw *ah,
struct ath9k_channel *chan)
{
u32 rfMode = 0;
if (chan == NULL)
return;
rfMode |= (IS_CHAN_B(chan) || IS_CHAN_G(chan))
? AR_PHY_MODE_DYNAMIC : AR_PHY_MODE_OFDM;
if (IS_CHAN_A_FAST_CLOCK(ah, chan))
rfMode |= (AR_PHY_MODE_DYNAMIC | AR_PHY_MODE_DYN_CCK_DISABLE);
REG_WRITE(ah, AR_PHY_MODE, rfMode);
}
static void ar9003_hw_mark_phy_inactive(struct ath_hw *ah)
{
REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_DIS);
}
static void ar9003_hw_set_delta_slope(struct ath_hw *ah,
struct ath9k_channel *chan)
{
u32 coef_scaled, ds_coef_exp, ds_coef_man;
u32 clockMhzScaled = 0x64000000;
struct chan_centers centers;
/*
* half and quarter rate can divide the scaled clock by 2 or 4
* scale for selected channel bandwidth
*/
if (IS_CHAN_HALF_RATE(chan))
clockMhzScaled = clockMhzScaled >> 1;
else if (IS_CHAN_QUARTER_RATE(chan))
clockMhzScaled = clockMhzScaled >> 2;
/*
* ALGO -> coef = 1e8/fcarrier*fclock/40;
* scaled coef to provide precision for this floating calculation
*/
ath9k_hw_get_channel_centers(ah, chan, &centers);
coef_scaled = clockMhzScaled / centers.synth_center;
ath9k_hw_get_delta_slope_vals(ah, coef_scaled, &ds_coef_man,
&ds_coef_exp);
REG_RMW_FIELD(ah, AR_PHY_TIMING3,
AR_PHY_TIMING3_DSC_MAN, ds_coef_man);
REG_RMW_FIELD(ah, AR_PHY_TIMING3,
AR_PHY_TIMING3_DSC_EXP, ds_coef_exp);
/*
* For Short GI,
* scaled coeff is 9/10 that of normal coeff
*/
coef_scaled = (9 * coef_scaled) / 10;
ath9k_hw_get_delta_slope_vals(ah, coef_scaled, &ds_coef_man,
&ds_coef_exp);
/* for short gi */
REG_RMW_FIELD(ah, AR_PHY_SGI_DELTA,
AR_PHY_SGI_DSC_MAN, ds_coef_man);
REG_RMW_FIELD(ah, AR_PHY_SGI_DELTA,
AR_PHY_SGI_DSC_EXP, ds_coef_exp);
}
static bool ar9003_hw_rfbus_req(struct ath_hw *ah)
{
REG_WRITE(ah, AR_PHY_RFBUS_REQ, AR_PHY_RFBUS_REQ_EN);
return ath9k_hw_wait(ah, AR_PHY_RFBUS_GRANT, AR_PHY_RFBUS_GRANT_EN,
AR_PHY_RFBUS_GRANT_EN, AH_WAIT_TIMEOUT);
}
/*
* Wait for the frequency synth to settle (synth goes on via PHY_ACTIVE_EN).
* Read the phy active delay register. Value is in 100ns increments.
*/
static void ar9003_hw_rfbus_done(struct ath_hw *ah)
{
u32 synthDelay = REG_READ(ah, AR_PHY_RX_DELAY) & AR_PHY_RX_DELAY_DELAY;
if (IS_CHAN_B(ah->curchan))
synthDelay = (4 * synthDelay) / 22;
else
synthDelay /= 10;
udelay(synthDelay + BASE_ACTIVATE_DELAY);
REG_WRITE(ah, AR_PHY_RFBUS_REQ, 0);
}
/*
* Set the interrupt and GPIO values so the ISR can disable RF
* on a switch signal. Assumes GPIO port and interrupt polarity
* are set prior to call.
*/
static void ar9003_hw_enable_rfkill(struct ath_hw *ah)
{
/* Connect rfsilent_bb_l to baseband */
REG_SET_BIT(ah, AR_GPIO_INPUT_EN_VAL,
AR_GPIO_INPUT_EN_VAL_RFSILENT_BB);
/* Set input mux for rfsilent_bb_l to GPIO #0 */
REG_CLR_BIT(ah, AR_GPIO_INPUT_MUX2,
AR_GPIO_INPUT_MUX2_RFSILENT);
/*
* Configure the desired GPIO port for input and
* enable baseband rf silence.
*/
ath9k_hw_cfg_gpio_input(ah, ah->rfkill_gpio);
REG_SET_BIT(ah, AR_PHY_TEST, RFSILENT_BB);
}
static void ar9003_hw_set_diversity(struct ath_hw *ah, bool value)
{
u32 v = REG_READ(ah, AR_PHY_CCK_DETECT);
if (value)
v |= AR_PHY_CCK_DETECT_BB_ENABLE_ANT_FAST_DIV;
else
v &= ~AR_PHY_CCK_DETECT_BB_ENABLE_ANT_FAST_DIV;
REG_WRITE(ah, AR_PHY_CCK_DETECT, v);
}
static bool ar9003_hw_ani_control(struct ath_hw *ah,
enum ath9k_ani_cmd cmd, int param)
{
struct ar5416AniState *aniState = ah->curani;
struct ath_common *common = ath9k_hw_common(ah);
switch (cmd & ah->ani_function) {
case ATH9K_ANI_NOISE_IMMUNITY_LEVEL:{
u32 level = param;
if (level >= ARRAY_SIZE(ah->totalSizeDesired)) {
ath_print(common, ATH_DBG_ANI,
"level out of range (%u > %u)\n",
level,
(unsigned)ARRAY_SIZE(ah->totalSizeDesired));
return false;
}
REG_RMW_FIELD(ah, AR_PHY_DESIRED_SZ,
AR_PHY_DESIRED_SZ_TOT_DES,
ah->totalSizeDesired[level]);
REG_RMW_FIELD(ah, AR_PHY_AGC,
AR_PHY_AGC_COARSE_LOW,
ah->coarse_low[level]);
REG_RMW_FIELD(ah, AR_PHY_AGC,
AR_PHY_AGC_COARSE_HIGH,
ah->coarse_high[level]);
REG_RMW_FIELD(ah, AR_PHY_FIND_SIG,
AR_PHY_FIND_SIG_FIRPWR, ah->firpwr[level]);
if (level > aniState->noiseImmunityLevel)
ah->stats.ast_ani_niup++;
else if (level < aniState->noiseImmunityLevel)
ah->stats.ast_ani_nidown++;
aniState->noiseImmunityLevel = level;
break;
}
case ATH9K_ANI_OFDM_WEAK_SIGNAL_DETECTION:{
const int m1ThreshLow[] = { 127, 50 };
const int m2ThreshLow[] = { 127, 40 };
const int m1Thresh[] = { 127, 0x4d };
const int m2Thresh[] = { 127, 0x40 };
const int m2CountThr[] = { 31, 16 };
const int m2CountThrLow[] = { 63, 48 };
u32 on = param ? 1 : 0;
REG_RMW_FIELD(ah, AR_PHY_SFCORR_LOW,
AR_PHY_SFCORR_LOW_M1_THRESH_LOW,
m1ThreshLow[on]);
REG_RMW_FIELD(ah, AR_PHY_SFCORR_LOW,
AR_PHY_SFCORR_LOW_M2_THRESH_LOW,
m2ThreshLow[on]);
REG_RMW_FIELD(ah, AR_PHY_SFCORR,
AR_PHY_SFCORR_M1_THRESH, m1Thresh[on]);
REG_RMW_FIELD(ah, AR_PHY_SFCORR,
AR_PHY_SFCORR_M2_THRESH, m2Thresh[on]);
REG_RMW_FIELD(ah, AR_PHY_SFCORR,
AR_PHY_SFCORR_M2COUNT_THR, m2CountThr[on]);
REG_RMW_FIELD(ah, AR_PHY_SFCORR_LOW,
AR_PHY_SFCORR_LOW_M2COUNT_THR_LOW,
m2CountThrLow[on]);
REG_RMW_FIELD(ah, AR_PHY_SFCORR_EXT,
AR_PHY_SFCORR_EXT_M1_THRESH_LOW, m1ThreshLow[on]);
REG_RMW_FIELD(ah, AR_PHY_SFCORR_EXT,
AR_PHY_SFCORR_EXT_M2_THRESH_LOW, m2ThreshLow[on]);
REG_RMW_FIELD(ah, AR_PHY_SFCORR_EXT,
AR_PHY_SFCORR_EXT_M1_THRESH, m1Thresh[on]);
REG_RMW_FIELD(ah, AR_PHY_SFCORR_EXT,
AR_PHY_SFCORR_EXT_M2_THRESH, m2Thresh[on]);
if (on)
REG_SET_BIT(ah, AR_PHY_SFCORR_LOW,
AR_PHY_SFCORR_LOW_USE_SELF_CORR_LOW);
else
REG_CLR_BIT(ah, AR_PHY_SFCORR_LOW,
AR_PHY_SFCORR_LOW_USE_SELF_CORR_LOW);
if (!on != aniState->ofdmWeakSigDetectOff) {
if (on)
ah->stats.ast_ani_ofdmon++;
else
ah->stats.ast_ani_ofdmoff++;
aniState->ofdmWeakSigDetectOff = !on;
}
break;
}
case ATH9K_ANI_CCK_WEAK_SIGNAL_THR:{
const int weakSigThrCck[] = { 8, 6 };
u32 high = param ? 1 : 0;
REG_RMW_FIELD(ah, AR_PHY_CCK_DETECT,
AR_PHY_CCK_DETECT_WEAK_SIG_THR_CCK,
weakSigThrCck[high]);
if (high != aniState->cckWeakSigThreshold) {
if (high)
ah->stats.ast_ani_cckhigh++;
else
ah->stats.ast_ani_ccklow++;
aniState->cckWeakSigThreshold = high;
}
break;
}
case ATH9K_ANI_FIRSTEP_LEVEL:{
const int firstep[] = { 0, 4, 8 };
u32 level = param;
if (level >= ARRAY_SIZE(firstep)) {
ath_print(common, ATH_DBG_ANI,
"level out of range (%u > %u)\n",
level,
(unsigned) ARRAY_SIZE(firstep));
return false;
}
REG_RMW_FIELD(ah, AR_PHY_FIND_SIG,
AR_PHY_FIND_SIG_FIRSTEP,
firstep[level]);
if (level > aniState->firstepLevel)
ah->stats.ast_ani_stepup++;
else if (level < aniState->firstepLevel)
ah->stats.ast_ani_stepdown++;
aniState->firstepLevel = level;
break;
}
case ATH9K_ANI_SPUR_IMMUNITY_LEVEL:{
const int cycpwrThr1[] = { 2, 4, 6, 8, 10, 12, 14, 16 };
u32 level = param;
if (level >= ARRAY_SIZE(cycpwrThr1)) {
ath_print(common, ATH_DBG_ANI,
"level out of range (%u > %u)\n",
level,
(unsigned) ARRAY_SIZE(cycpwrThr1));
return false;
}
REG_RMW_FIELD(ah, AR_PHY_TIMING5,
AR_PHY_TIMING5_CYCPWR_THR1,
cycpwrThr1[level]);
if (level > aniState->spurImmunityLevel)
ah->stats.ast_ani_spurup++;
else if (level < aniState->spurImmunityLevel)
ah->stats.ast_ani_spurdown++;
aniState->spurImmunityLevel = level;
break;
}
case ATH9K_ANI_PRESENT:
break;
default:
ath_print(common, ATH_DBG_ANI,
"invalid cmd %u\n", cmd);
return false;
}
ath_print(common, ATH_DBG_ANI, "ANI parameters:\n");
ath_print(common, ATH_DBG_ANI,
"noiseImmunityLevel=%d, spurImmunityLevel=%d, "
"ofdmWeakSigDetectOff=%d\n",
aniState->noiseImmunityLevel,
aniState->spurImmunityLevel,
!aniState->ofdmWeakSigDetectOff);
ath_print(common, ATH_DBG_ANI,
"cckWeakSigThreshold=%d, "
"firstepLevel=%d, listenTime=%d\n",
aniState->cckWeakSigThreshold,
aniState->firstepLevel,
aniState->listenTime);
ath_print(common, ATH_DBG_ANI,
"cycleCount=%d, ofdmPhyErrCount=%d, cckPhyErrCount=%d\n\n",
aniState->cycleCount,
aniState->ofdmPhyErrCount,
aniState->cckPhyErrCount);
return true;
}
static void ar9003_hw_nf_sanitize_2g(struct ath_hw *ah, s16 *nf)
{
struct ath_common *common = ath9k_hw_common(ah);
if (*nf > ah->nf_2g_max) {
ath_print(common, ATH_DBG_CALIBRATE,
"2 GHz NF (%d) > MAX (%d), "
"correcting to MAX",
*nf, ah->nf_2g_max);
*nf = ah->nf_2g_max;
} else if (*nf < ah->nf_2g_min) {
ath_print(common, ATH_DBG_CALIBRATE,
"2 GHz NF (%d) < MIN (%d), "
"correcting to MIN",
*nf, ah->nf_2g_min);
*nf = ah->nf_2g_min;
}
}
static void ar9003_hw_nf_sanitize_5g(struct ath_hw *ah, s16 *nf)
{
struct ath_common *common = ath9k_hw_common(ah);
if (*nf > ah->nf_5g_max) {
ath_print(common, ATH_DBG_CALIBRATE,
"5 GHz NF (%d) > MAX (%d), "
"correcting to MAX",
*nf, ah->nf_5g_max);
*nf = ah->nf_5g_max;
} else if (*nf < ah->nf_5g_min) {
ath_print(common, ATH_DBG_CALIBRATE,
"5 GHz NF (%d) < MIN (%d), "
"correcting to MIN",
*nf, ah->nf_5g_min);
*nf = ah->nf_5g_min;
}
}
static void ar9003_hw_nf_sanitize(struct ath_hw *ah, s16 *nf)
{
if (IS_CHAN_2GHZ(ah->curchan))
ar9003_hw_nf_sanitize_2g(ah, nf);
else
ar9003_hw_nf_sanitize_5g(ah, nf);
}
static void ar9003_hw_do_getnf(struct ath_hw *ah,
int16_t nfarray[NUM_NF_READINGS])
{
struct ath_common *common = ath9k_hw_common(ah);
int16_t nf;
nf = MS(REG_READ(ah, AR_PHY_CCA_0), AR_PHY_MINCCA_PWR);
if (nf & 0x100)
nf = 0 - ((nf ^ 0x1ff) + 1);
ar9003_hw_nf_sanitize(ah, &nf);
ath_print(common, ATH_DBG_CALIBRATE,
"NF calibrated [ctl] [chain 0] is %d\n", nf);
nfarray[0] = nf;
nf = MS(REG_READ(ah, AR_PHY_CCA_1), AR_PHY_CH1_MINCCA_PWR);
if (nf & 0x100)
nf = 0 - ((nf ^ 0x1ff) + 1);
ar9003_hw_nf_sanitize(ah, &nf);
ath_print(common, ATH_DBG_CALIBRATE,
"NF calibrated [ctl] [chain 1] is %d\n", nf);
nfarray[1] = nf;
nf = MS(REG_READ(ah, AR_PHY_CCA_2), AR_PHY_CH2_MINCCA_PWR);
if (nf & 0x100)
nf = 0 - ((nf ^ 0x1ff) + 1);
ar9003_hw_nf_sanitize(ah, &nf);
ath_print(common, ATH_DBG_CALIBRATE,
"NF calibrated [ctl] [chain 2] is %d\n", nf);
nfarray[2] = nf;
nf = MS(REG_READ(ah, AR_PHY_EXT_CCA), AR_PHY_EXT_MINCCA_PWR);
if (nf & 0x100)
nf = 0 - ((nf ^ 0x1ff) + 1);
ar9003_hw_nf_sanitize(ah, &nf);
ath_print(common, ATH_DBG_CALIBRATE,
"NF calibrated [ext] [chain 0] is %d\n", nf);
nfarray[3] = nf;
nf = MS(REG_READ(ah, AR_PHY_EXT_CCA_1), AR_PHY_CH1_EXT_MINCCA_PWR);
if (nf & 0x100)
nf = 0 - ((nf ^ 0x1ff) + 1);
ar9003_hw_nf_sanitize(ah, &nf);
ath_print(common, ATH_DBG_CALIBRATE,
"NF calibrated [ext] [chain 1] is %d\n", nf);
nfarray[4] = nf;
nf = MS(REG_READ(ah, AR_PHY_EXT_CCA_2), AR_PHY_CH2_EXT_MINCCA_PWR);
if (nf & 0x100)
nf = 0 - ((nf ^ 0x1ff) + 1);
ar9003_hw_nf_sanitize(ah, &nf);
ath_print(common, ATH_DBG_CALIBRATE,
"NF calibrated [ext] [chain 2] is %d\n", nf);
nfarray[5] = nf;
}
void ar9003_hw_set_nf_limits(struct ath_hw *ah)
{
ah->nf_2g_max = AR_PHY_CCA_MAX_GOOD_VAL_9300_2GHZ;
ah->nf_2g_min = AR_PHY_CCA_MIN_GOOD_VAL_9300_2GHZ;
ah->nf_5g_max = AR_PHY_CCA_MAX_GOOD_VAL_9300_5GHZ;
ah->nf_5g_min = AR_PHY_CCA_MIN_GOOD_VAL_9300_5GHZ;
}
/*
* Find out which of the RX chains are enabled
*/
static u32 ar9003_hw_get_rx_chainmask(struct ath_hw *ah)
{
u32 chain = REG_READ(ah, AR_PHY_RX_CHAINMASK);
/*
* The bits [2:0] indicate the rx chain mask and are to be
* interpreted as follows:
* 00x => Only chain 0 is enabled
* 01x => Chain 1 and 0 enabled
* 1xx => Chain 2,1 and 0 enabled
*/
return chain & 0x7;
}
static void ar9003_hw_loadnf(struct ath_hw *ah, struct ath9k_channel *chan)
{
struct ath9k_nfcal_hist *h;
unsigned i, j;
int32_t val;
const u32 ar9300_cca_regs[6] = {
AR_PHY_CCA_0,
AR_PHY_CCA_1,
AR_PHY_CCA_2,
AR_PHY_EXT_CCA,
AR_PHY_EXT_CCA_1,
AR_PHY_EXT_CCA_2,
};
u8 chainmask, rx_chain_status;
struct ath_common *common = ath9k_hw_common(ah);
rx_chain_status = ar9003_hw_get_rx_chainmask(ah);
chainmask = 0x3F;
h = ah->nfCalHist;
for (i = 0; i < NUM_NF_READINGS; i++) {
if (chainmask & (1 << i)) {
val = REG_READ(ah, ar9300_cca_regs[i]);
val &= 0xFFFFFE00;
val |= (((u32) (h[i].privNF) << 1) & 0x1ff);
REG_WRITE(ah, ar9300_cca_regs[i], val);
}
}
/*
* Load software filtered NF value into baseband internal minCCApwr
* variable.
*/
REG_CLR_BIT(ah, AR_PHY_AGC_CONTROL,
AR_PHY_AGC_CONTROL_ENABLE_NF);
REG_CLR_BIT(ah, AR_PHY_AGC_CONTROL,
AR_PHY_AGC_CONTROL_NO_UPDATE_NF);
REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_NF);
/*
* Wait for load to complete, should be fast, a few 10s of us.
* The max delay was changed from an original 250us to 10000us
* since 250us often results in NF load timeout and causes deaf
* condition during stress testing 12/12/2009
*/
for (j = 0; j < 1000; j++) {
if ((REG_READ(ah, AR_PHY_AGC_CONTROL) &
AR_PHY_AGC_CONTROL_NF) == 0)
break;
udelay(10);
}
/*
* We timed out waiting for the noisefloor to load, probably due to an
* in-progress rx. Simply return here and allow the load plenty of time
* to complete before the next calibration interval. We need to avoid
* trying to load -50 (which happens below) while the previous load is
* still in progress as this can cause rx deafness. Instead by returning
* here, the baseband nf cal will just be capped by our present
* noisefloor until the next calibration timer.
*/
if (j == 1000) {
ath_print(common, ATH_DBG_ANY, "Timeout while waiting for nf "
"to load: AR_PHY_AGC_CONTROL=0x%x\n",
REG_READ(ah, AR_PHY_AGC_CONTROL));
return;
}
/*
* Restore maxCCAPower register parameter again so that we're not capped
* by the median we just loaded. This will be initial (and max) value
* of next noise floor calibration the baseband does.
*/
for (i = 0; i < NUM_NF_READINGS; i++) {
if (chainmask & (1 << i)) {
val = REG_READ(ah, ar9300_cca_regs[i]);
val &= 0xFFFFFE00;
val |= (((u32) (-50) << 1) & 0x1ff);
REG_WRITE(ah, ar9300_cca_regs[i], val);
}
}
}
void ar9003_hw_attach_phy_ops(struct ath_hw *ah)
{
struct ath_hw_private_ops *priv_ops = ath9k_hw_private_ops(ah);
priv_ops->rf_set_freq = ar9003_hw_set_channel;
priv_ops->spur_mitigate_freq = ar9003_hw_spur_mitigate;
priv_ops->compute_pll_control = ar9003_hw_compute_pll_control;
priv_ops->set_channel_regs = ar9003_hw_set_channel_regs;
priv_ops->init_bb = ar9003_hw_init_bb;
priv_ops->process_ini = ar9003_hw_process_ini;
priv_ops->set_rfmode = ar9003_hw_set_rfmode;
priv_ops->mark_phy_inactive = ar9003_hw_mark_phy_inactive;
priv_ops->set_delta_slope = ar9003_hw_set_delta_slope;
priv_ops->rfbus_req = ar9003_hw_rfbus_req;
priv_ops->rfbus_done = ar9003_hw_rfbus_done;
priv_ops->enable_rfkill = ar9003_hw_enable_rfkill;
priv_ops->set_diversity = ar9003_hw_set_diversity;
priv_ops->ani_control = ar9003_hw_ani_control;
priv_ops->do_getnf = ar9003_hw_do_getnf;
priv_ops->loadnf = ar9003_hw_loadnf;
}
void ar9003_hw_bb_watchdog_config(struct ath_hw *ah)
{
struct ath_common *common = ath9k_hw_common(ah);
u32 idle_tmo_ms = ah->bb_watchdog_timeout_ms;
u32 val, idle_count;
if (!idle_tmo_ms) {
/* disable IRQ, disable chip-reset for BB panic */
REG_WRITE(ah, AR_PHY_WATCHDOG_CTL_2,
REG_READ(ah, AR_PHY_WATCHDOG_CTL_2) &
~(AR_PHY_WATCHDOG_RST_ENABLE |
AR_PHY_WATCHDOG_IRQ_ENABLE));
/* disable watchdog in non-IDLE mode, disable in IDLE mode */
REG_WRITE(ah, AR_PHY_WATCHDOG_CTL_1,
REG_READ(ah, AR_PHY_WATCHDOG_CTL_1) &
~(AR_PHY_WATCHDOG_NON_IDLE_ENABLE |
AR_PHY_WATCHDOG_IDLE_ENABLE));
ath_print(common, ATH_DBG_RESET, "Disabled BB Watchdog\n");
return;
}
/* enable IRQ, disable chip-reset for BB watchdog */
val = REG_READ(ah, AR_PHY_WATCHDOG_CTL_2) & AR_PHY_WATCHDOG_CNTL2_MASK;
REG_WRITE(ah, AR_PHY_WATCHDOG_CTL_2,
(val | AR_PHY_WATCHDOG_IRQ_ENABLE) &
~AR_PHY_WATCHDOG_RST_ENABLE);
/* bound limit to 10 secs */
if (idle_tmo_ms > 10000)
idle_tmo_ms = 10000;
/*
* The time unit for watchdog event is 2^15 44/88MHz cycles.
*
* For HT20 we have a time unit of 2^15/44 MHz = .74 ms per tick
* For HT40 we have a time unit of 2^15/88 MHz = .37 ms per tick
*
* Given we use fast clock now in 5 GHz, these time units should
* be common for both 2 GHz and 5 GHz.
*/
idle_count = (100 * idle_tmo_ms) / 74;
if (ah->curchan && IS_CHAN_HT40(ah->curchan))
idle_count = (100 * idle_tmo_ms) / 37;
/*
* enable watchdog in non-IDLE mode, disable in IDLE mode,
* set idle time-out.
*/
REG_WRITE(ah, AR_PHY_WATCHDOG_CTL_1,
AR_PHY_WATCHDOG_NON_IDLE_ENABLE |
AR_PHY_WATCHDOG_IDLE_MASK |
(AR_PHY_WATCHDOG_NON_IDLE_MASK & (idle_count << 2)));
ath_print(common, ATH_DBG_RESET,
"Enabled BB Watchdog timeout (%u ms)\n",
idle_tmo_ms);
}
void ar9003_hw_bb_watchdog_read(struct ath_hw *ah)
{
/*
* we want to avoid printing in ISR context so we save the
* watchdog status to be printed later in bottom half context.
*/
ah->bb_watchdog_last_status = REG_READ(ah, AR_PHY_WATCHDOG_STATUS);
/*
* the watchdog timer should reset on status read but to be sure
* sure we write 0 to the watchdog status bit.
*/
REG_WRITE(ah, AR_PHY_WATCHDOG_STATUS,
ah->bb_watchdog_last_status & ~AR_PHY_WATCHDOG_STATUS_CLR);
}
void ar9003_hw_bb_watchdog_dbg_info(struct ath_hw *ah)
{
struct ath_common *common = ath9k_hw_common(ah);
u32 rxc_pcnt = 0, rxf_pcnt = 0, txf_pcnt = 0, status;
if (likely(!(common->debug_mask & ATH_DBG_RESET)))
return;
status = ah->bb_watchdog_last_status;
ath_print(common, ATH_DBG_RESET,
"\n==== BB update: BB status=0x%08x ====\n", status);
ath_print(common, ATH_DBG_RESET,
"** BB state: wd=%u det=%u rdar=%u rOFDM=%d "
"rCCK=%u tOFDM=%u tCCK=%u agc=%u src=%u **\n",
MS(status, AR_PHY_WATCHDOG_INFO),
MS(status, AR_PHY_WATCHDOG_DET_HANG),
MS(status, AR_PHY_WATCHDOG_RADAR_SM),
MS(status, AR_PHY_WATCHDOG_RX_OFDM_SM),
MS(status, AR_PHY_WATCHDOG_RX_CCK_SM),
MS(status, AR_PHY_WATCHDOG_TX_OFDM_SM),
MS(status, AR_PHY_WATCHDOG_TX_CCK_SM),
MS(status, AR_PHY_WATCHDOG_AGC_SM),
MS(status,AR_PHY_WATCHDOG_SRCH_SM));
ath_print(common, ATH_DBG_RESET,
"** BB WD cntl: cntl1=0x%08x cntl2=0x%08x **\n",
REG_READ(ah, AR_PHY_WATCHDOG_CTL_1),
REG_READ(ah, AR_PHY_WATCHDOG_CTL_2));
ath_print(common, ATH_DBG_RESET,
"** BB mode: BB_gen_controls=0x%08x **\n",
REG_READ(ah, AR_PHY_GEN_CTRL));
if (ath9k_hw_GetMibCycleCountsPct(ah, &rxc_pcnt, &rxf_pcnt, &txf_pcnt))
ath_print(common, ATH_DBG_RESET,
"** BB busy times: rx_clear=%d%%, "
"rx_frame=%d%%, tx_frame=%d%% **\n",
rxc_pcnt, rxf_pcnt, txf_pcnt);
ath_print(common, ATH_DBG_RESET,
"==== BB update: done ====\n\n");
}
EXPORT_SYMBOL(ar9003_hw_bb_watchdog_dbg_info);
View Git Blame Copy Permalink