kevin/linux
1
Fork 0
Code
87f5032e0c
linux/drivers/media/video/tda7432.c
Hans Verkuil 8bf2f8e747 V4L/DVB (3577): Cleanup audio input handling 
Cleanup audio input handling in bttv and tvaudio:
- inputs were specified that were never used
- mute was handled as a special input which led to confusing code
- confusing naming made it difficult to see if the setting was for
  i2c or gpio.
The old audiochip.h input names moved to tvaudio.h. Currently this
is used both by tvaudio and msp3400 until the msp3400 implements the
new msp3400-specific inputs.
Detect in bttv the tvaudio and msp3400 i2c clients and use these
client pointers to set the inputs directly instead of broadcasting the
command.
Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be
replaced again later by the new ROUTING commands.
Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is
a user level command and not to be used internally. It wasn't called at
all anyway.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-24 16:26:56 -03:00

527 lines
14 KiB
C
Raw Blame History

/*
* For the STS-Thompson TDA7432 audio processor chip
*
* Handles audio functions: volume, balance, tone, loudness
* This driver will not complain if used with any
* other i2c device with the same address.
*
* Muting and tone control by Jonathan Isom <jisom@ematic.com>
*
* Copyright (c) 2000 Eric Sandeen <eric_sandeen@bigfoot.com>
* This code is placed under the terms of the GNU General Public License
* Based on tda9855.c by Steve VanDeBogart (vandebo@uclink.berkeley.edu)
* Which was based on tda8425.c by Greg Alexander (c) 1998
*
* OPTIONS:
* debug - set to 1 if you'd like to see debug messages
* set to 2 if you'd like to be inundated with debug messages
*
* loudness - set between 0 and 15 for varying degrees of loudness effect
*
* maxvol - set maximium volume to +20db (1), default is 0db(0)
*
*
* Revision: 0.7 - maxvol module parm to set maximium volume 0db or +20db
* store if muted so we can return it
* change balance only if flaged to
* Revision: 0.6 - added tone controls
* Revision: 0.5 - Fixed odd balance problem
* Revision: 0.4 - added muting
* Revision: 0.3 - Fixed silly reversed volume controls. :)
* Revision: 0.2 - Cleaned up #defines
* fixed volume control
* Added I2C_DRIVERID_TDA7432
* added loudness insmod control
* Revision: 0.1 - initial version
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/string.h>
#include <linux/timer.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/videodev.h>
#include <linux/i2c.h>
#include <linux/i2c-algo-bit.h>
#include <media/v4l2-common.h>
#include <media/i2c-addr.h>
#ifndef VIDEO_AUDIO_BALANCE
# define VIDEO_AUDIO_BALANCE 32
#endif
MODULE_AUTHOR("Eric Sandeen <eric_sandeen@bigfoot.com>");
MODULE_DESCRIPTION("bttv driver for the tda7432 audio processor chip");
MODULE_LICENSE("GPL");
static int maxvol;
static int loudness; /* disable loudness by default */
static int debug; /* insmod parameter */
module_param(debug, int, S_IRUGO | S_IWUSR);
module_param(loudness, int, S_IRUGO);
MODULE_PARM_DESC(maxvol,"Set maximium volume to +20db (0), default is 0db(1)");
module_param(maxvol, int, S_IRUGO | S_IWUSR);
/* Address to scan (I2C address of this chip) */
static unsigned short normal_i2c[] = {
I2C_ADDR_TDA7432 >> 1,
I2C_CLIENT_END,
};
I2C_CLIENT_INSMOD;
/* Structure of address and subaddresses for the tda7432 */
struct tda7432 {
int addr;
int input;
int volume;
int muted;
int bass, treble;
int lf, lr, rf, rr;
int loud;
struct i2c_client c;
};
static struct i2c_driver driver;
static struct i2c_client client_template;
/* The TDA7432 is made by STS-Thompson
* http://www.st.com
* http://us.st.com/stonline/books/pdf/docs/4056.pdf
*
* TDA7432: I2C-bus controlled basic audio processor
*
* The TDA7432 controls basic audio functions like volume, balance,
* and tone control (including loudness). It also has four channel
* output (for front and rear). Since most vidcap cards probably
* don't have 4 channel output, this driver will set front & rear
* together (no independent control).
*/
/* Subaddresses for TDA7432 */
#define TDA7432_IN 0x00 /* Input select */
#define TDA7432_VL 0x01 /* Volume */
#define TDA7432_TN 0x02 /* Bass, Treble (Tone) */
#define TDA7432_LF 0x03 /* Attenuation LF (Left Front) */
#define TDA7432_LR 0x04 /* Attenuation LR (Left Rear) */
#define TDA7432_RF 0x05 /* Attenuation RF (Right Front) */
#define TDA7432_RR 0x06 /* Attenuation RR (Right Rear) */
#define TDA7432_LD 0x07 /* Loudness */
/* Masks for bits in TDA7432 subaddresses */
/* Many of these not used - just for documentation */
/* Subaddress 0x00 - Input selection and bass control */
/* Bits 0,1,2 control input:
* 0x00 - Stereo input
* 0x02 - Mono input
* 0x03 - Mute (Using Attenuators Plays better with modules)
* Mono probably isn't used - I'm guessing only the stereo
* input is connected on most cards, so we'll set it to stereo.
*
* Bit 3 controls bass cut: 0/1 is non-symmetric/symmetric bass cut
* Bit 4 controls bass range: 0/1 is extended/standard bass range
*
* Highest 3 bits not used
*/
#define TDA7432_STEREO_IN 0
#define TDA7432_MONO_IN 2 /* Probably won't be used */
#define TDA7432_BASS_SYM 1 << 3
#define TDA7432_BASS_NORM 1 << 4
/* Subaddress 0x01 - Volume */
/* Lower 7 bits control volume from -79dB to +32dB in 1dB steps
* Recommended maximum is +20 dB
*
* +32dB: 0x00
* +20dB: 0x0c
* 0dB: 0x20
* -79dB: 0x6f
*
* MSB (bit 7) controls loudness: 1/0 is loudness on/off
*/
#define TDA7432_VOL_0DB 0x20
#define TDA7432_LD_ON 1 << 7
/* Subaddress 0x02 - Tone control */
/* Bits 0,1,2 control absolute treble gain from 0dB to 14dB
* 0x0 is 14dB, 0x7 is 0dB
*
* Bit 3 controls treble attenuation/gain (sign)
* 1 = gain (+)
* 0 = attenuation (-)
*
* Bits 4,5,6 control absolute bass gain from 0dB to 14dB
* (This is only true for normal base range, set in 0x00)
* 0x0 << 4 is 14dB, 0x7 is 0dB
*
* Bit 7 controls bass attenuation/gain (sign)
* 1 << 7 = gain (+)
* 0 << 7 = attenuation (-)
*
* Example:
* 1 1 0 1 0 1 0 1 is +4dB bass, -4dB treble
*/
#define TDA7432_TREBLE_0DB 0xf
#define TDA7432_TREBLE 7
#define TDA7432_TREBLE_GAIN 1 << 3
#define TDA7432_BASS_0DB 0xf
#define TDA7432_BASS 7 << 4
#define TDA7432_BASS_GAIN 1 << 7
/* Subaddress 0x03 - Left Front attenuation */
/* Subaddress 0x04 - Left Rear attenuation */
/* Subaddress 0x05 - Right Front attenuation */
/* Subaddress 0x06 - Right Rear attenuation */
/* Bits 0,1,2,3,4 control attenuation from 0dB to -37.5dB
* in 1.5dB steps.
*
* 0x00 is 0dB
* 0x1f is -37.5dB
*
* Bit 5 mutes that channel when set (1 = mute, 0 = unmute)
* We'll use the mute on the input, though (above)
* Bits 6,7 unused
*/
#define TDA7432_ATTEN_0DB 0x00
#define TDA7432_MUTE 0x1 << 5
/* Subaddress 0x07 - Loudness Control */
/* Bits 0,1,2,3 control loudness from 0dB to -15dB in 1dB steps
* when bit 4 is NOT set
*
* 0x0 is 0dB
* 0xf is -15dB
*
* If bit 4 is set, then there is a flat attenuation according to
* the lower 4 bits, as above.
*
* Bits 5,6,7 unused
*/
/* Begin code */
static int tda7432_write(struct i2c_client *client, int subaddr, int val)
{
unsigned char buffer[2];
v4l_dbg(2, debug,client,"In tda7432_write\n");
v4l_dbg(1, debug,client,"Writing %d 0x%x\n", subaddr, val);
buffer[0] = subaddr;
buffer[1] = val;
if (2 != i2c_master_send(client,buffer,2)) {
v4l_err(client,"I/O error, trying (write %d 0x%x)\n",
subaddr, val);
return -1;
}
return 0;
}
/* I don't think we ever actually _read_ the chip... */
static int tda7432_set(struct i2c_client *client)
{
struct tda7432 *t = i2c_get_clientdata(client);
unsigned char buf[16];
v4l_dbg(2, debug,client,"In tda7432_set\n");
v4l_dbg(1, debug,client,
"tda7432: 7432_set(0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x)\n",
t->input,t->volume,t->bass,t->treble,t->lf,t->lr,t->rf,t->rr,t->loud);
buf[0] = TDA7432_IN;
buf[1] = t->input;
buf[2] = t->volume;
buf[3] = t->bass;
buf[4] = t->treble;
buf[5] = t->lf;
buf[6] = t->lr;
buf[7] = t->rf;
buf[8] = t->rr;
buf[9] = t->loud;
if (10 != i2c_master_send(client,buf,10)) {
v4l_err(client,"I/O error, trying tda7432_set\n");
return -1;
}
return 0;
}
static void do_tda7432_init(struct i2c_client *client)
{
struct tda7432 *t = i2c_get_clientdata(client);
v4l_dbg(2, debug,client,"In tda7432_init\n");
t->input = TDA7432_STEREO_IN | /* Main (stereo) input */
TDA7432_BASS_SYM | /* Symmetric bass cut */
TDA7432_BASS_NORM; /* Normal bass range */
t->volume = 0x3b ; /* -27dB Volume */
if (loudness) /* Turn loudness on? */
t->volume |= TDA7432_LD_ON;
t->muted = VIDEO_AUDIO_MUTE;
t->treble = TDA7432_TREBLE_0DB; /* 0dB Treble */
t->bass = TDA7432_BASS_0DB; /* 0dB Bass */
t->lf = TDA7432_ATTEN_0DB; /* 0dB attenuation */
t->lr = TDA7432_ATTEN_0DB; /* 0dB attenuation */
t->rf = TDA7432_ATTEN_0DB; /* 0dB attenuation */
t->rr = TDA7432_ATTEN_0DB; /* 0dB attenuation */
t->loud = loudness; /* insmod parameter */
tda7432_set(client);
}
/* *********************** *
* i2c interface functions *
* *********************** */
static int tda7432_attach(struct i2c_adapter *adap, int addr, int kind)
{
struct tda7432 *t;
struct i2c_client *client;
t = kzalloc(sizeof *t,GFP_KERNEL);
if (!t)
return -ENOMEM;
client = &t->c;
memcpy(client,&client_template,sizeof(struct i2c_client));
client->adapter = adap;
client->addr = addr;
i2c_set_clientdata(client, t);
do_tda7432_init(client);
i2c_attach_client(client);
v4l_info(client, "chip found @ 0x%x (%s)\n", addr << 1, adap->name);
return 0;
}
static int tda7432_probe(struct i2c_adapter *adap)
{
if (adap->class & I2C_CLASS_TV_ANALOG)
return i2c_probe(adap, &addr_data, tda7432_attach);
return 0;
}
static int tda7432_detach(struct i2c_client *client)
{
struct tda7432 *t = i2c_get_clientdata(client);
do_tda7432_init(client);
i2c_detach_client(client);
kfree(t);
return 0;
}
static int tda7432_command(struct i2c_client *client,
unsigned int cmd, void *arg)
{
struct tda7432 *t = i2c_get_clientdata(client);
v4l_dbg(2, debug,client,"In tda7432_command\n");
if (debug>1)
v4l_i2c_print_ioctl(client,cmd);
switch (cmd) {
/* --- v4l ioctls --- */
/* take care: bttv does userspace copying, we'll get a
kernel pointer here... */
/* Query card - scale from TDA7432 settings to V4L settings */
case VIDIOCGAUDIO:
{
struct video_audio *va = arg;
va->flags |= VIDEO_AUDIO_VOLUME |
VIDEO_AUDIO_BASS |
VIDEO_AUDIO_TREBLE |
VIDEO_AUDIO_MUTABLE;
if (t->muted)
va->flags |= VIDEO_AUDIO_MUTE;
va->mode |= VIDEO_SOUND_STEREO;
/* Master volume control
* V4L volume is min 0, max 65535
* TDA7432 Volume:
* Min (-79dB) is 0x6f
* Max (+20dB) is 0x07 (630)
* Max (0dB) is 0x20 (829)
* (Mask out bit 7 of vol - it's for the loudness setting)
*/
if (!maxvol){ /* max +20db */
va->volume = ( 0x6f - (t->volume & 0x7F) ) * 630;
} else { /* max 0db */
va->volume = ( 0x6f - (t->volume & 0x7F) ) * 829;
}
/* Balance depends on L,R attenuation
* V4L balance is 0 to 65535, middle is 32768
* TDA7432 attenuation: min (0dB) is 0, max (-37.5dB) is 0x1f
* to scale up to V4L numbers, mult by 1057
* attenuation exists for lf, lr, rf, rr
* we use only lf and rf (front channels)
*/
if ( (t->lf) < (t->rf) )
/* right is attenuated, balance shifted left */
va->balance = (32768 - 1057*(t->rf));
else
/* left is attenuated, balance shifted right */
va->balance = (32768 + 1057*(t->lf));
/* Bass/treble 4 bits each */
va->bass=t->bass;
if(va->bass >= 0x8)
va->bass = ~(va->bass - 0x8) & 0xf;
va->bass = (va->bass << 12)+(va->bass << 8)+(va->bass << 4)+(va->bass);
va->treble=t->treble;
if(va->treble >= 0x8)
va->treble = ~(va->treble - 0x8) & 0xf;
va->treble = (va->treble << 12)+(va->treble << 8)+(va->treble << 4)+(va->treble);
break; /* VIDIOCGAUDIO case */
}
/* Set card - scale from V4L settings to TDA7432 settings */
case VIDIOCSAUDIO:
{
struct video_audio *va = arg;
if(va->flags & VIDEO_AUDIO_VOLUME){
if(!maxvol){ /* max +20db */
t->volume = 0x6f - ((va->volume)/630);
} else { /* max 0db */
t->volume = 0x6f - ((va->volume)/829);
}
if (loudness) /* Turn on the loudness bit */
t->volume |= TDA7432_LD_ON;
tda7432_write(client,TDA7432_VL, t->volume);
}
if(va->flags & VIDEO_AUDIO_BASS)
{
t->bass = va->bass >> 12;
if(t->bass>= 0x8)
t->bass = (~t->bass & 0xf) + 0x8 ;
}
if(va->flags & VIDEO_AUDIO_TREBLE)
{
t->treble= va->treble >> 12;
if(t->treble>= 0x8)
t->treble = (~t->treble & 0xf) + 0x8 ;
}
if(va->flags & (VIDEO_AUDIO_TREBLE| VIDEO_AUDIO_BASS))
tda7432_write(client,TDA7432_TN, 0x10 | (t->bass << 4) | t->treble );
if(va->flags & VIDEO_AUDIO_BALANCE) {
if (va->balance < 32768)
{
/* shifted to left, attenuate right */
t->rr = (32768 - va->balance)/1057;
t->rf = t->rr;
t->lr = TDA7432_ATTEN_0DB;
t->lf = TDA7432_ATTEN_0DB;
}
else if(va->balance > 32769)
{
/* shifted to right, attenuate left */
t->lf = (va->balance - 32768)/1057;
t->lr = t->lf;
t->rr = TDA7432_ATTEN_0DB;
t->rf = TDA7432_ATTEN_0DB;
}
else
{
/* centered */
t->rr = TDA7432_ATTEN_0DB;
t->rf = TDA7432_ATTEN_0DB;
t->lf = TDA7432_ATTEN_0DB;
t->lr = TDA7432_ATTEN_0DB;
}
}
t->muted=(va->flags & VIDEO_AUDIO_MUTE);
if (t->muted)
{
/* Mute & update balance*/
tda7432_write(client,TDA7432_LF, t->lf | TDA7432_MUTE);
tda7432_write(client,TDA7432_LR, t->lr | TDA7432_MUTE);
tda7432_write(client,TDA7432_RF, t->rf | TDA7432_MUTE);
tda7432_write(client,TDA7432_RR, t->rr | TDA7432_MUTE);
} else {
tda7432_write(client,TDA7432_LF, t->lf);
tda7432_write(client,TDA7432_LR, t->lr);
tda7432_write(client,TDA7432_RF, t->rf);
tda7432_write(client,TDA7432_RR, t->rr);
}
break;
} /* end of VIDEOCSAUDIO case */
} /* end of (cmd) switch */
return 0;
}
static struct i2c_driver driver = {
.driver = {
.name = "tda7432",
},
.id = I2C_DRIVERID_TDA7432,
.attach_adapter = tda7432_probe,
.detach_client = tda7432_detach,
.command = tda7432_command,
};
static struct i2c_client client_template =
{
.name = "tda7432",
.driver = &driver,
};
static int __init tda7432_init(void)
{
if ( (loudness < 0) || (loudness > 15) ) {
printk(KERN_ERR "loudness parameter must be between 0 and 15\n");
return -EINVAL;
}
return i2c_add_driver(&driver);
}
static void __exit tda7432_fini(void)
{
i2c_del_driver(&driver);
}
module_init(tda7432_init);
module_exit(tda7432_fini);
/*
* Local variables:
* c-basic-offset: 8
* End:
*/
View Git Blame Copy Permalink