87f3dd7797
1. DRCMRxx is no longer recommended, use DRCMR(xx) instead, and pass DRCMR index by "struct resource" if possible 2. DCSRxx, DDADRxx, DSADRxx, DTADRxx, DCMDxx is never used, use DCSR(), DDADR(), DSADR(), DTADR(), DCMD() instead Signed-off-by: Eric Miao <eric.miao@marvell.com> Acked-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
877 lines
40 KiB
C
877 lines
40 KiB
C
/*
|
|
* arch/arm/mach-pxa/include/mach/pxa-regs.h
|
|
*
|
|
* Author: Nicolas Pitre
|
|
* Created: Jun 15, 2001
|
|
* Copyright: MontaVista Software Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#ifndef __PXA_REGS_H
|
|
#define __PXA_REGS_H
|
|
|
|
|
|
/*
|
|
* PXA Chip selects
|
|
*/
|
|
|
|
#define PXA_CS0_PHYS 0x00000000
|
|
#define PXA_CS1_PHYS 0x04000000
|
|
#define PXA_CS2_PHYS 0x08000000
|
|
#define PXA_CS3_PHYS 0x0C000000
|
|
#define PXA_CS4_PHYS 0x10000000
|
|
#define PXA_CS5_PHYS 0x14000000
|
|
|
|
|
|
/*
|
|
* Personal Computer Memory Card International Association (PCMCIA) sockets
|
|
*/
|
|
|
|
#define PCMCIAPrtSp 0x04000000 /* PCMCIA Partition Space [byte] */
|
|
#define PCMCIASp (4*PCMCIAPrtSp) /* PCMCIA Space [byte] */
|
|
#define PCMCIAIOSp PCMCIAPrtSp /* PCMCIA I/O Space [byte] */
|
|
#define PCMCIAAttrSp PCMCIAPrtSp /* PCMCIA Attribute Space [byte] */
|
|
#define PCMCIAMemSp PCMCIAPrtSp /* PCMCIA Memory Space [byte] */
|
|
|
|
#define PCMCIA0Sp PCMCIASp /* PCMCIA 0 Space [byte] */
|
|
#define PCMCIA0IOSp PCMCIAIOSp /* PCMCIA 0 I/O Space [byte] */
|
|
#define PCMCIA0AttrSp PCMCIAAttrSp /* PCMCIA 0 Attribute Space [byte] */
|
|
#define PCMCIA0MemSp PCMCIAMemSp /* PCMCIA 0 Memory Space [byte] */
|
|
|
|
#define PCMCIA1Sp PCMCIASp /* PCMCIA 1 Space [byte] */
|
|
#define PCMCIA1IOSp PCMCIAIOSp /* PCMCIA 1 I/O Space [byte] */
|
|
#define PCMCIA1AttrSp PCMCIAAttrSp /* PCMCIA 1 Attribute Space [byte] */
|
|
#define PCMCIA1MemSp PCMCIAMemSp /* PCMCIA 1 Memory Space [byte] */
|
|
|
|
#define _PCMCIA(Nb) /* PCMCIA [0..1] */ \
|
|
(0x20000000 + (Nb)*PCMCIASp)
|
|
#define _PCMCIAIO(Nb) _PCMCIA (Nb) /* PCMCIA I/O [0..1] */
|
|
#define _PCMCIAAttr(Nb) /* PCMCIA Attribute [0..1] */ \
|
|
(_PCMCIA (Nb) + 2*PCMCIAPrtSp)
|
|
#define _PCMCIAMem(Nb) /* PCMCIA Memory [0..1] */ \
|
|
(_PCMCIA (Nb) + 3*PCMCIAPrtSp)
|
|
|
|
#define _PCMCIA0 _PCMCIA (0) /* PCMCIA 0 */
|
|
#define _PCMCIA0IO _PCMCIAIO (0) /* PCMCIA 0 I/O */
|
|
#define _PCMCIA0Attr _PCMCIAAttr (0) /* PCMCIA 0 Attribute */
|
|
#define _PCMCIA0Mem _PCMCIAMem (0) /* PCMCIA 0 Memory */
|
|
|
|
#define _PCMCIA1 _PCMCIA (1) /* PCMCIA 1 */
|
|
#define _PCMCIA1IO _PCMCIAIO (1) /* PCMCIA 1 I/O */
|
|
#define _PCMCIA1Attr _PCMCIAAttr (1) /* PCMCIA 1 Attribute */
|
|
#define _PCMCIA1Mem _PCMCIAMem (1) /* PCMCIA 1 Memory */
|
|
|
|
|
|
|
|
/*
|
|
* DMA Controller
|
|
*/
|
|
#define DCSR(x) __REG2(0x40000000, (x) << 2)
|
|
|
|
#define DCSR_RUN (1 << 31) /* Run Bit (read / write) */
|
|
#define DCSR_NODESC (1 << 30) /* No-Descriptor Fetch (read / write) */
|
|
#define DCSR_STOPIRQEN (1 << 29) /* Stop Interrupt Enable (read / write) */
|
|
#define DCSR_REQPEND (1 << 8) /* Request Pending (read-only) */
|
|
#define DCSR_STOPSTATE (1 << 3) /* Stop State (read-only) */
|
|
#define DCSR_ENDINTR (1 << 2) /* End Interrupt (read / write) */
|
|
#define DCSR_STARTINTR (1 << 1) /* Start Interrupt (read / write) */
|
|
#define DCSR_BUSERR (1 << 0) /* Bus Error Interrupt (read / write) */
|
|
|
|
#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
|
|
#define DCSR_EORIRQEN (1 << 28) /* End of Receive Interrupt Enable (R/W) */
|
|
#define DCSR_EORJMPEN (1 << 27) /* Jump to next descriptor on EOR */
|
|
#define DCSR_EORSTOPEN (1 << 26) /* STOP on an EOR */
|
|
#define DCSR_SETCMPST (1 << 25) /* Set Descriptor Compare Status */
|
|
#define DCSR_CLRCMPST (1 << 24) /* Clear Descriptor Compare Status */
|
|
#define DCSR_CMPST (1 << 10) /* The Descriptor Compare Status */
|
|
#define DCSR_EORINTR (1 << 9) /* The end of Receive */
|
|
#endif
|
|
|
|
#define DALGN __REG(0x400000a0) /* DMA Alignment Register */
|
|
#define DINT __REG(0x400000f0) /* DMA Interrupt Register */
|
|
|
|
#define DRCMR(n) (*(((n) < 64) ? \
|
|
&__REG2(0x40000100, ((n) & 0x3f) << 2) : \
|
|
&__REG2(0x40001100, ((n) & 0x3f) << 2)))
|
|
|
|
#define DRCMR_MAPVLD (1 << 7) /* Map Valid (read / write) */
|
|
#define DRCMR_CHLNUM 0x1f /* mask for Channel Number (read / write) */
|
|
|
|
#define DDADR(x) __REG2(0x40000200, (x) << 4)
|
|
#define DSADR(x) __REG2(0x40000204, (x) << 4)
|
|
#define DTADR(x) __REG2(0x40000208, (x) << 4)
|
|
#define DCMD(x) __REG2(0x4000020c, (x) << 4)
|
|
|
|
#define DDADR_DESCADDR 0xfffffff0 /* Address of next descriptor (mask) */
|
|
#define DDADR_STOP (1 << 0) /* Stop (read / write) */
|
|
|
|
#define DCMD_INCSRCADDR (1 << 31) /* Source Address Increment Setting. */
|
|
#define DCMD_INCTRGADDR (1 << 30) /* Target Address Increment Setting. */
|
|
#define DCMD_FLOWSRC (1 << 29) /* Flow Control by the source. */
|
|
#define DCMD_FLOWTRG (1 << 28) /* Flow Control by the target. */
|
|
#define DCMD_STARTIRQEN (1 << 22) /* Start Interrupt Enable */
|
|
#define DCMD_ENDIRQEN (1 << 21) /* End Interrupt Enable */
|
|
#define DCMD_ENDIAN (1 << 18) /* Device Endian-ness. */
|
|
#define DCMD_BURST8 (1 << 16) /* 8 byte burst */
|
|
#define DCMD_BURST16 (2 << 16) /* 16 byte burst */
|
|
#define DCMD_BURST32 (3 << 16) /* 32 byte burst */
|
|
#define DCMD_WIDTH1 (1 << 14) /* 1 byte width */
|
|
#define DCMD_WIDTH2 (2 << 14) /* 2 byte width (HalfWord) */
|
|
#define DCMD_WIDTH4 (3 << 14) /* 4 byte width (Word) */
|
|
#define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */
|
|
|
|
|
|
/*
|
|
* UARTs
|
|
*/
|
|
|
|
/* Full Function UART (FFUART) */
|
|
#define FFUART FFRBR
|
|
#define FFRBR __REG(0x40100000) /* Receive Buffer Register (read only) */
|
|
#define FFTHR __REG(0x40100000) /* Transmit Holding Register (write only) */
|
|
#define FFIER __REG(0x40100004) /* Interrupt Enable Register (read/write) */
|
|
#define FFIIR __REG(0x40100008) /* Interrupt ID Register (read only) */
|
|
#define FFFCR __REG(0x40100008) /* FIFO Control Register (write only) */
|
|
#define FFLCR __REG(0x4010000C) /* Line Control Register (read/write) */
|
|
#define FFMCR __REG(0x40100010) /* Modem Control Register (read/write) */
|
|
#define FFLSR __REG(0x40100014) /* Line Status Register (read only) */
|
|
#define FFMSR __REG(0x40100018) /* Modem Status Register (read only) */
|
|
#define FFSPR __REG(0x4010001C) /* Scratch Pad Register (read/write) */
|
|
#define FFISR __REG(0x40100020) /* Infrared Selection Register (read/write) */
|
|
#define FFDLL __REG(0x40100000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */
|
|
#define FFDLH __REG(0x40100004) /* Divisor Latch High Register (DLAB = 1) (read/write) */
|
|
|
|
/* Bluetooth UART (BTUART) */
|
|
#define BTUART BTRBR
|
|
#define BTRBR __REG(0x40200000) /* Receive Buffer Register (read only) */
|
|
#define BTTHR __REG(0x40200000) /* Transmit Holding Register (write only) */
|
|
#define BTIER __REG(0x40200004) /* Interrupt Enable Register (read/write) */
|
|
#define BTIIR __REG(0x40200008) /* Interrupt ID Register (read only) */
|
|
#define BTFCR __REG(0x40200008) /* FIFO Control Register (write only) */
|
|
#define BTLCR __REG(0x4020000C) /* Line Control Register (read/write) */
|
|
#define BTMCR __REG(0x40200010) /* Modem Control Register (read/write) */
|
|
#define BTLSR __REG(0x40200014) /* Line Status Register (read only) */
|
|
#define BTMSR __REG(0x40200018) /* Modem Status Register (read only) */
|
|
#define BTSPR __REG(0x4020001C) /* Scratch Pad Register (read/write) */
|
|
#define BTISR __REG(0x40200020) /* Infrared Selection Register (read/write) */
|
|
#define BTDLL __REG(0x40200000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */
|
|
#define BTDLH __REG(0x40200004) /* Divisor Latch High Register (DLAB = 1) (read/write) */
|
|
|
|
/* Standard UART (STUART) */
|
|
#define STUART STRBR
|
|
#define STRBR __REG(0x40700000) /* Receive Buffer Register (read only) */
|
|
#define STTHR __REG(0x40700000) /* Transmit Holding Register (write only) */
|
|
#define STIER __REG(0x40700004) /* Interrupt Enable Register (read/write) */
|
|
#define STIIR __REG(0x40700008) /* Interrupt ID Register (read only) */
|
|
#define STFCR __REG(0x40700008) /* FIFO Control Register (write only) */
|
|
#define STLCR __REG(0x4070000C) /* Line Control Register (read/write) */
|
|
#define STMCR __REG(0x40700010) /* Modem Control Register (read/write) */
|
|
#define STLSR __REG(0x40700014) /* Line Status Register (read only) */
|
|
#define STMSR __REG(0x40700018) /* Reserved */
|
|
#define STSPR __REG(0x4070001C) /* Scratch Pad Register (read/write) */
|
|
#define STISR __REG(0x40700020) /* Infrared Selection Register (read/write) */
|
|
#define STDLL __REG(0x40700000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */
|
|
#define STDLH __REG(0x40700004) /* Divisor Latch High Register (DLAB = 1) (read/write) */
|
|
|
|
/* Hardware UART (HWUART) */
|
|
#define HWUART HWRBR
|
|
#define HWRBR __REG(0x41600000) /* Receive Buffer Register (read only) */
|
|
#define HWTHR __REG(0x41600000) /* Transmit Holding Register (write only) */
|
|
#define HWIER __REG(0x41600004) /* Interrupt Enable Register (read/write) */
|
|
#define HWIIR __REG(0x41600008) /* Interrupt ID Register (read only) */
|
|
#define HWFCR __REG(0x41600008) /* FIFO Control Register (write only) */
|
|
#define HWLCR __REG(0x4160000C) /* Line Control Register (read/write) */
|
|
#define HWMCR __REG(0x41600010) /* Modem Control Register (read/write) */
|
|
#define HWLSR __REG(0x41600014) /* Line Status Register (read only) */
|
|
#define HWMSR __REG(0x41600018) /* Modem Status Register (read only) */
|
|
#define HWSPR __REG(0x4160001C) /* Scratch Pad Register (read/write) */
|
|
#define HWISR __REG(0x41600020) /* Infrared Selection Register (read/write) */
|
|
#define HWFOR __REG(0x41600024) /* Receive FIFO Occupancy Register (read only) */
|
|
#define HWABR __REG(0x41600028) /* Auto-Baud Control Register (read/write) */
|
|
#define HWACR __REG(0x4160002C) /* Auto-Baud Count Register (read only) */
|
|
#define HWDLL __REG(0x41600000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */
|
|
#define HWDLH __REG(0x41600004) /* Divisor Latch High Register (DLAB = 1) (read/write) */
|
|
|
|
#define IER_DMAE (1 << 7) /* DMA Requests Enable */
|
|
#define IER_UUE (1 << 6) /* UART Unit Enable */
|
|
#define IER_NRZE (1 << 5) /* NRZ coding Enable */
|
|
#define IER_RTIOE (1 << 4) /* Receiver Time Out Interrupt Enable */
|
|
#define IER_MIE (1 << 3) /* Modem Interrupt Enable */
|
|
#define IER_RLSE (1 << 2) /* Receiver Line Status Interrupt Enable */
|
|
#define IER_TIE (1 << 1) /* Transmit Data request Interrupt Enable */
|
|
#define IER_RAVIE (1 << 0) /* Receiver Data Available Interrupt Enable */
|
|
|
|
#define IIR_FIFOES1 (1 << 7) /* FIFO Mode Enable Status */
|
|
#define IIR_FIFOES0 (1 << 6) /* FIFO Mode Enable Status */
|
|
#define IIR_TOD (1 << 3) /* Time Out Detected */
|
|
#define IIR_IID2 (1 << 2) /* Interrupt Source Encoded */
|
|
#define IIR_IID1 (1 << 1) /* Interrupt Source Encoded */
|
|
#define IIR_IP (1 << 0) /* Interrupt Pending (active low) */
|
|
|
|
#define FCR_ITL2 (1 << 7) /* Interrupt Trigger Level */
|
|
#define FCR_ITL1 (1 << 6) /* Interrupt Trigger Level */
|
|
#define FCR_RESETTF (1 << 2) /* Reset Transmitter FIFO */
|
|
#define FCR_RESETRF (1 << 1) /* Reset Receiver FIFO */
|
|
#define FCR_TRFIFOE (1 << 0) /* Transmit and Receive FIFO Enable */
|
|
#define FCR_ITL_1 (0)
|
|
#define FCR_ITL_8 (FCR_ITL1)
|
|
#define FCR_ITL_16 (FCR_ITL2)
|
|
#define FCR_ITL_32 (FCR_ITL2|FCR_ITL1)
|
|
|
|
#define LCR_DLAB (1 << 7) /* Divisor Latch Access Bit */
|
|
#define LCR_SB (1 << 6) /* Set Break */
|
|
#define LCR_STKYP (1 << 5) /* Sticky Parity */
|
|
#define LCR_EPS (1 << 4) /* Even Parity Select */
|
|
#define LCR_PEN (1 << 3) /* Parity Enable */
|
|
#define LCR_STB (1 << 2) /* Stop Bit */
|
|
#define LCR_WLS1 (1 << 1) /* Word Length Select */
|
|
#define LCR_WLS0 (1 << 0) /* Word Length Select */
|
|
|
|
#define LSR_FIFOE (1 << 7) /* FIFO Error Status */
|
|
#define LSR_TEMT (1 << 6) /* Transmitter Empty */
|
|
#define LSR_TDRQ (1 << 5) /* Transmit Data Request */
|
|
#define LSR_BI (1 << 4) /* Break Interrupt */
|
|
#define LSR_FE (1 << 3) /* Framing Error */
|
|
#define LSR_PE (1 << 2) /* Parity Error */
|
|
#define LSR_OE (1 << 1) /* Overrun Error */
|
|
#define LSR_DR (1 << 0) /* Data Ready */
|
|
|
|
#define MCR_LOOP (1 << 4)
|
|
#define MCR_OUT2 (1 << 3) /* force MSR_DCD in loopback mode */
|
|
#define MCR_OUT1 (1 << 2) /* force MSR_RI in loopback mode */
|
|
#define MCR_RTS (1 << 1) /* Request to Send */
|
|
#define MCR_DTR (1 << 0) /* Data Terminal Ready */
|
|
|
|
#define MSR_DCD (1 << 7) /* Data Carrier Detect */
|
|
#define MSR_RI (1 << 6) /* Ring Indicator */
|
|
#define MSR_DSR (1 << 5) /* Data Set Ready */
|
|
#define MSR_CTS (1 << 4) /* Clear To Send */
|
|
#define MSR_DDCD (1 << 3) /* Delta Data Carrier Detect */
|
|
#define MSR_TERI (1 << 2) /* Trailing Edge Ring Indicator */
|
|
#define MSR_DDSR (1 << 1) /* Delta Data Set Ready */
|
|
#define MSR_DCTS (1 << 0) /* Delta Clear To Send */
|
|
|
|
/*
|
|
* IrSR (Infrared Selection Register)
|
|
*/
|
|
#define STISR_RXPL (1 << 4) /* Receive Data Polarity */
|
|
#define STISR_TXPL (1 << 3) /* Transmit Data Polarity */
|
|
#define STISR_XMODE (1 << 2) /* Transmit Pulse Width Select */
|
|
#define STISR_RCVEIR (1 << 1) /* Receiver SIR Enable */
|
|
#define STISR_XMITIR (1 << 0) /* Transmitter SIR Enable */
|
|
|
|
|
|
/*
|
|
* I2C registers - moved into drivers/i2c/busses/i2c-pxa.c
|
|
*/
|
|
|
|
/*
|
|
* Serial Audio Controller
|
|
*/
|
|
|
|
#define SACR0 __REG(0x40400000) /* Global Control Register */
|
|
#define SACR1 __REG(0x40400004) /* Serial Audio I 2 S/MSB-Justified Control Register */
|
|
#define SASR0 __REG(0x4040000C) /* Serial Audio I 2 S/MSB-Justified Interface and FIFO Status Register */
|
|
#define SAIMR __REG(0x40400014) /* Serial Audio Interrupt Mask Register */
|
|
#define SAICR __REG(0x40400018) /* Serial Audio Interrupt Clear Register */
|
|
#define SADIV __REG(0x40400060) /* Audio Clock Divider Register. */
|
|
#define SADR __REG(0x40400080) /* Serial Audio Data Register (TX and RX FIFO access Register). */
|
|
|
|
#define SACR0_RFTH(x) ((x) << 12) /* Rx FIFO Interrupt or DMA Trigger Threshold */
|
|
#define SACR0_TFTH(x) ((x) << 8) /* Tx FIFO Interrupt or DMA Trigger Threshold */
|
|
#define SACR0_STRF (1 << 5) /* FIFO Select for EFWR Special Function */
|
|
#define SACR0_EFWR (1 << 4) /* Enable EFWR Function */
|
|
#define SACR0_RST (1 << 3) /* FIFO, i2s Register Reset */
|
|
#define SACR0_BCKD (1 << 2) /* Bit Clock Direction */
|
|
#define SACR0_ENB (1 << 0) /* Enable I2S Link */
|
|
#define SACR1_ENLBF (1 << 5) /* Enable Loopback */
|
|
#define SACR1_DRPL (1 << 4) /* Disable Replaying Function */
|
|
#define SACR1_DREC (1 << 3) /* Disable Recording Function */
|
|
#define SACR1_AMSL (1 << 0) /* Specify Alternate Mode */
|
|
|
|
#define SASR0_I2SOFF (1 << 7) /* Controller Status */
|
|
#define SASR0_ROR (1 << 6) /* Rx FIFO Overrun */
|
|
#define SASR0_TUR (1 << 5) /* Tx FIFO Underrun */
|
|
#define SASR0_RFS (1 << 4) /* Rx FIFO Service Request */
|
|
#define SASR0_TFS (1 << 3) /* Tx FIFO Service Request */
|
|
#define SASR0_BSY (1 << 2) /* I2S Busy */
|
|
#define SASR0_RNE (1 << 1) /* Rx FIFO Not Empty */
|
|
#define SASR0_TNF (1 << 0) /* Tx FIFO Not Empty */
|
|
|
|
#define SAICR_ROR (1 << 6) /* Clear Rx FIFO Overrun Interrupt */
|
|
#define SAICR_TUR (1 << 5) /* Clear Tx FIFO Underrun Interrupt */
|
|
|
|
#define SAIMR_ROR (1 << 6) /* Enable Rx FIFO Overrun Condition Interrupt */
|
|
#define SAIMR_TUR (1 << 5) /* Enable Tx FIFO Underrun Condition Interrupt */
|
|
#define SAIMR_RFS (1 << 4) /* Enable Rx FIFO Service Interrupt */
|
|
#define SAIMR_TFS (1 << 3) /* Enable Tx FIFO Service Interrupt */
|
|
|
|
/*
|
|
* AC97 Controller registers
|
|
*/
|
|
|
|
#define POCR __REG(0x40500000) /* PCM Out Control Register */
|
|
#define POCR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */
|
|
#define POCR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */
|
|
|
|
#define PICR __REG(0x40500004) /* PCM In Control Register */
|
|
#define PICR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */
|
|
#define PICR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */
|
|
|
|
#define MCCR __REG(0x40500008) /* Mic In Control Register */
|
|
#define MCCR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */
|
|
#define MCCR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */
|
|
|
|
#define GCR __REG(0x4050000C) /* Global Control Register */
|
|
#ifdef CONFIG_PXA3xx
|
|
#define GCR_CLKBPB (1 << 31) /* Internal clock enable */
|
|
#endif
|
|
#define GCR_nDMAEN (1 << 24) /* non DMA Enable */
|
|
#define GCR_CDONE_IE (1 << 19) /* Command Done Interrupt Enable */
|
|
#define GCR_SDONE_IE (1 << 18) /* Status Done Interrupt Enable */
|
|
#define GCR_SECRDY_IEN (1 << 9) /* Secondary Ready Interrupt Enable */
|
|
#define GCR_PRIRDY_IEN (1 << 8) /* Primary Ready Interrupt Enable */
|
|
#define GCR_SECRES_IEN (1 << 5) /* Secondary Resume Interrupt Enable */
|
|
#define GCR_PRIRES_IEN (1 << 4) /* Primary Resume Interrupt Enable */
|
|
#define GCR_ACLINK_OFF (1 << 3) /* AC-link Shut Off */
|
|
#define GCR_WARM_RST (1 << 2) /* AC97 Warm Reset */
|
|
#define GCR_COLD_RST (1 << 1) /* AC'97 Cold Reset (0 = active) */
|
|
#define GCR_GIE (1 << 0) /* Codec GPI Interrupt Enable */
|
|
|
|
#define POSR __REG(0x40500010) /* PCM Out Status Register */
|
|
#define POSR_FIFOE (1 << 4) /* FIFO error */
|
|
#define POSR_FSR (1 << 2) /* FIFO Service Request */
|
|
|
|
#define PISR __REG(0x40500014) /* PCM In Status Register */
|
|
#define PISR_FIFOE (1 << 4) /* FIFO error */
|
|
#define PISR_EOC (1 << 3) /* DMA End-of-Chain (exclusive clear) */
|
|
#define PISR_FSR (1 << 2) /* FIFO Service Request */
|
|
|
|
#define MCSR __REG(0x40500018) /* Mic In Status Register */
|
|
#define MCSR_FIFOE (1 << 4) /* FIFO error */
|
|
#define MCSR_EOC (1 << 3) /* DMA End-of-Chain (exclusive clear) */
|
|
#define MCSR_FSR (1 << 2) /* FIFO Service Request */
|
|
|
|
#define GSR __REG(0x4050001C) /* Global Status Register */
|
|
#define GSR_CDONE (1 << 19) /* Command Done */
|
|
#define GSR_SDONE (1 << 18) /* Status Done */
|
|
#define GSR_RDCS (1 << 15) /* Read Completion Status */
|
|
#define GSR_BIT3SLT12 (1 << 14) /* Bit 3 of slot 12 */
|
|
#define GSR_BIT2SLT12 (1 << 13) /* Bit 2 of slot 12 */
|
|
#define GSR_BIT1SLT12 (1 << 12) /* Bit 1 of slot 12 */
|
|
#define GSR_SECRES (1 << 11) /* Secondary Resume Interrupt */
|
|
#define GSR_PRIRES (1 << 10) /* Primary Resume Interrupt */
|
|
#define GSR_SCR (1 << 9) /* Secondary Codec Ready */
|
|
#define GSR_PCR (1 << 8) /* Primary Codec Ready */
|
|
#define GSR_MCINT (1 << 7) /* Mic In Interrupt */
|
|
#define GSR_POINT (1 << 6) /* PCM Out Interrupt */
|
|
#define GSR_PIINT (1 << 5) /* PCM In Interrupt */
|
|
#define GSR_ACOFFD (1 << 3) /* AC-link Shut Off Done */
|
|
#define GSR_MOINT (1 << 2) /* Modem Out Interrupt */
|
|
#define GSR_MIINT (1 << 1) /* Modem In Interrupt */
|
|
#define GSR_GSCI (1 << 0) /* Codec GPI Status Change Interrupt */
|
|
|
|
#define CAR __REG(0x40500020) /* CODEC Access Register */
|
|
#define CAR_CAIP (1 << 0) /* Codec Access In Progress */
|
|
|
|
#define PCDR __REG(0x40500040) /* PCM FIFO Data Register */
|
|
#define MCDR __REG(0x40500060) /* Mic-in FIFO Data Register */
|
|
|
|
#define MOCR __REG(0x40500100) /* Modem Out Control Register */
|
|
#define MOCR_FEIE (1 << 3) /* FIFO Error */
|
|
#define MOCR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */
|
|
|
|
#define MICR __REG(0x40500108) /* Modem In Control Register */
|
|
#define MICR_FEIE (1 << 3) /* FIFO Error */
|
|
#define MICR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */
|
|
|
|
#define MOSR __REG(0x40500110) /* Modem Out Status Register */
|
|
#define MOSR_FIFOE (1 << 4) /* FIFO error */
|
|
#define MOSR_FSR (1 << 2) /* FIFO Service Request */
|
|
|
|
#define MISR __REG(0x40500118) /* Modem In Status Register */
|
|
#define MISR_FIFOE (1 << 4) /* FIFO error */
|
|
#define MISR_EOC (1 << 3) /* DMA End-of-Chain (exclusive clear) */
|
|
#define MISR_FSR (1 << 2) /* FIFO Service Request */
|
|
|
|
#define MODR __REG(0x40500140) /* Modem FIFO Data Register */
|
|
|
|
#define PAC_REG_BASE __REG(0x40500200) /* Primary Audio Codec */
|
|
#define SAC_REG_BASE __REG(0x40500300) /* Secondary Audio Codec */
|
|
#define PMC_REG_BASE __REG(0x40500400) /* Primary Modem Codec */
|
|
#define SMC_REG_BASE __REG(0x40500500) /* Secondary Modem Codec */
|
|
|
|
|
|
/*
|
|
* Fast Infrared Communication Port
|
|
*/
|
|
|
|
#define FICP __REG(0x40800000) /* Start of FICP area */
|
|
#define ICCR0 __REG(0x40800000) /* ICP Control Register 0 */
|
|
#define ICCR1 __REG(0x40800004) /* ICP Control Register 1 */
|
|
#define ICCR2 __REG(0x40800008) /* ICP Control Register 2 */
|
|
#define ICDR __REG(0x4080000c) /* ICP Data Register */
|
|
#define ICSR0 __REG(0x40800014) /* ICP Status Register 0 */
|
|
#define ICSR1 __REG(0x40800018) /* ICP Status Register 1 */
|
|
|
|
#define ICCR0_AME (1 << 7) /* Address match enable */
|
|
#define ICCR0_TIE (1 << 6) /* Transmit FIFO interrupt enable */
|
|
#define ICCR0_RIE (1 << 5) /* Recieve FIFO interrupt enable */
|
|
#define ICCR0_RXE (1 << 4) /* Receive enable */
|
|
#define ICCR0_TXE (1 << 3) /* Transmit enable */
|
|
#define ICCR0_TUS (1 << 2) /* Transmit FIFO underrun select */
|
|
#define ICCR0_LBM (1 << 1) /* Loopback mode */
|
|
#define ICCR0_ITR (1 << 0) /* IrDA transmission */
|
|
|
|
#define ICCR2_RXP (1 << 3) /* Receive Pin Polarity select */
|
|
#define ICCR2_TXP (1 << 2) /* Transmit Pin Polarity select */
|
|
#define ICCR2_TRIG (3 << 0) /* Receive FIFO Trigger threshold */
|
|
#define ICCR2_TRIG_8 (0 << 0) /* >= 8 bytes */
|
|
#define ICCR2_TRIG_16 (1 << 0) /* >= 16 bytes */
|
|
#define ICCR2_TRIG_32 (2 << 0) /* >= 32 bytes */
|
|
|
|
#ifdef CONFIG_PXA27x
|
|
#define ICSR0_EOC (1 << 6) /* DMA End of Descriptor Chain */
|
|
#endif
|
|
#define ICSR0_FRE (1 << 5) /* Framing error */
|
|
#define ICSR0_RFS (1 << 4) /* Receive FIFO service request */
|
|
#define ICSR0_TFS (1 << 3) /* Transnit FIFO service request */
|
|
#define ICSR0_RAB (1 << 2) /* Receiver abort */
|
|
#define ICSR0_TUR (1 << 1) /* Trunsmit FIFO underun */
|
|
#define ICSR0_EIF (1 << 0) /* End/Error in FIFO */
|
|
|
|
#define ICSR1_ROR (1 << 6) /* Receiver FIFO underrun */
|
|
#define ICSR1_CRE (1 << 5) /* CRC error */
|
|
#define ICSR1_EOF (1 << 4) /* End of frame */
|
|
#define ICSR1_TNF (1 << 3) /* Transmit FIFO not full */
|
|
#define ICSR1_RNE (1 << 2) /* Receive FIFO not empty */
|
|
#define ICSR1_TBY (1 << 1) /* Tramsmiter busy flag */
|
|
#define ICSR1_RSY (1 << 0) /* Recevier synchronized flag */
|
|
|
|
|
|
/*
|
|
* Real Time Clock
|
|
*/
|
|
|
|
#define RCNR __REG(0x40900000) /* RTC Count Register */
|
|
#define RTAR __REG(0x40900004) /* RTC Alarm Register */
|
|
#define RTSR __REG(0x40900008) /* RTC Status Register */
|
|
#define RTTR __REG(0x4090000C) /* RTC Timer Trim Register */
|
|
#define PIAR __REG(0x40900038) /* Periodic Interrupt Alarm Register */
|
|
|
|
#define RTSR_PICE (1 << 15) /* Periodic interrupt count enable */
|
|
#define RTSR_PIALE (1 << 14) /* Periodic interrupt Alarm enable */
|
|
#define RTSR_HZE (1 << 3) /* HZ interrupt enable */
|
|
#define RTSR_ALE (1 << 2) /* RTC alarm interrupt enable */
|
|
#define RTSR_HZ (1 << 1) /* HZ rising-edge detected */
|
|
#define RTSR_AL (1 << 0) /* RTC alarm detected */
|
|
|
|
|
|
/*
|
|
* OS Timer & Match Registers
|
|
*/
|
|
|
|
#define OSMR0 __REG(0x40A00000) /* */
|
|
#define OSMR1 __REG(0x40A00004) /* */
|
|
#define OSMR2 __REG(0x40A00008) /* */
|
|
#define OSMR3 __REG(0x40A0000C) /* */
|
|
#define OSMR4 __REG(0x40A00080) /* */
|
|
#define OSCR __REG(0x40A00010) /* OS Timer Counter Register */
|
|
#define OSCR4 __REG(0x40A00040) /* OS Timer Counter Register */
|
|
#define OMCR4 __REG(0x40A000C0) /* */
|
|
#define OSSR __REG(0x40A00014) /* OS Timer Status Register */
|
|
#define OWER __REG(0x40A00018) /* OS Timer Watchdog Enable Register */
|
|
#define OIER __REG(0x40A0001C) /* OS Timer Interrupt Enable Register */
|
|
|
|
#define OSSR_M3 (1 << 3) /* Match status channel 3 */
|
|
#define OSSR_M2 (1 << 2) /* Match status channel 2 */
|
|
#define OSSR_M1 (1 << 1) /* Match status channel 1 */
|
|
#define OSSR_M0 (1 << 0) /* Match status channel 0 */
|
|
|
|
#define OWER_WME (1 << 0) /* Watchdog Match Enable */
|
|
|
|
#define OIER_E3 (1 << 3) /* Interrupt enable channel 3 */
|
|
#define OIER_E2 (1 << 2) /* Interrupt enable channel 2 */
|
|
#define OIER_E1 (1 << 1) /* Interrupt enable channel 1 */
|
|
#define OIER_E0 (1 << 0) /* Interrupt enable channel 0 */
|
|
|
|
|
|
/*
|
|
* Pulse Width Modulator
|
|
*/
|
|
|
|
#define PWM_CTRL0 __REG(0x40B00000) /* PWM 0 Control Register */
|
|
#define PWM_PWDUTY0 __REG(0x40B00004) /* PWM 0 Duty Cycle Register */
|
|
#define PWM_PERVAL0 __REG(0x40B00008) /* PWM 0 Period Control Register */
|
|
|
|
#define PWM_CTRL1 __REG(0x40C00000) /* PWM 1Control Register */
|
|
#define PWM_PWDUTY1 __REG(0x40C00004) /* PWM 1 Duty Cycle Register */
|
|
#define PWM_PERVAL1 __REG(0x40C00008) /* PWM 1 Period Control Register */
|
|
|
|
|
|
/*
|
|
* Interrupt Controller
|
|
*/
|
|
|
|
#define ICIP __REG(0x40D00000) /* Interrupt Controller IRQ Pending Register */
|
|
#define ICMR __REG(0x40D00004) /* Interrupt Controller Mask Register */
|
|
#define ICLR __REG(0x40D00008) /* Interrupt Controller Level Register */
|
|
#define ICFP __REG(0x40D0000C) /* Interrupt Controller FIQ Pending Register */
|
|
#define ICPR __REG(0x40D00010) /* Interrupt Controller Pending Register */
|
|
#define ICCR __REG(0x40D00014) /* Interrupt Controller Control Register */
|
|
|
|
#define ICIP2 __REG(0x40D0009C) /* Interrupt Controller IRQ Pending Register 2 */
|
|
#define ICMR2 __REG(0x40D000A0) /* Interrupt Controller Mask Register 2 */
|
|
#define ICLR2 __REG(0x40D000A4) /* Interrupt Controller Level Register 2 */
|
|
#define ICFP2 __REG(0x40D000A8) /* Interrupt Controller FIQ Pending Register 2 */
|
|
#define ICPR2 __REG(0x40D000AC) /* Interrupt Controller Pending Register 2 */
|
|
|
|
/*
|
|
* General Purpose I/O
|
|
*/
|
|
|
|
#define GPIO0_BASE ((void __iomem *)io_p2v(0x40E00000))
|
|
#define GPIO1_BASE ((void __iomem *)io_p2v(0x40E00004))
|
|
#define GPIO2_BASE ((void __iomem *)io_p2v(0x40E00008))
|
|
#define GPIO3_BASE ((void __iomem *)io_p2v(0x40E00100))
|
|
|
|
#define GPLR_OFFSET 0x00
|
|
#define GPDR_OFFSET 0x0C
|
|
#define GPSR_OFFSET 0x18
|
|
#define GPCR_OFFSET 0x24
|
|
#define GRER_OFFSET 0x30
|
|
#define GFER_OFFSET 0x3C
|
|
#define GEDR_OFFSET 0x48
|
|
|
|
#define GPLR0 __REG(0x40E00000) /* GPIO Pin-Level Register GPIO<31:0> */
|
|
#define GPLR1 __REG(0x40E00004) /* GPIO Pin-Level Register GPIO<63:32> */
|
|
#define GPLR2 __REG(0x40E00008) /* GPIO Pin-Level Register GPIO<80:64> */
|
|
|
|
#define GPDR0 __REG(0x40E0000C) /* GPIO Pin Direction Register GPIO<31:0> */
|
|
#define GPDR1 __REG(0x40E00010) /* GPIO Pin Direction Register GPIO<63:32> */
|
|
#define GPDR2 __REG(0x40E00014) /* GPIO Pin Direction Register GPIO<80:64> */
|
|
|
|
#define GPSR0 __REG(0x40E00018) /* GPIO Pin Output Set Register GPIO<31:0> */
|
|
#define GPSR1 __REG(0x40E0001C) /* GPIO Pin Output Set Register GPIO<63:32> */
|
|
#define GPSR2 __REG(0x40E00020) /* GPIO Pin Output Set Register GPIO<80:64> */
|
|
|
|
#define GPCR0 __REG(0x40E00024) /* GPIO Pin Output Clear Register GPIO<31:0> */
|
|
#define GPCR1 __REG(0x40E00028) /* GPIO Pin Output Clear Register GPIO <63:32> */
|
|
#define GPCR2 __REG(0x40E0002C) /* GPIO Pin Output Clear Register GPIO <80:64> */
|
|
|
|
#define GRER0 __REG(0x40E00030) /* GPIO Rising-Edge Detect Register GPIO<31:0> */
|
|
#define GRER1 __REG(0x40E00034) /* GPIO Rising-Edge Detect Register GPIO<63:32> */
|
|
#define GRER2 __REG(0x40E00038) /* GPIO Rising-Edge Detect Register GPIO<80:64> */
|
|
|
|
#define GFER0 __REG(0x40E0003C) /* GPIO Falling-Edge Detect Register GPIO<31:0> */
|
|
#define GFER1 __REG(0x40E00040) /* GPIO Falling-Edge Detect Register GPIO<63:32> */
|
|
#define GFER2 __REG(0x40E00044) /* GPIO Falling-Edge Detect Register GPIO<80:64> */
|
|
|
|
#define GEDR0 __REG(0x40E00048) /* GPIO Edge Detect Status Register GPIO<31:0> */
|
|
#define GEDR1 __REG(0x40E0004C) /* GPIO Edge Detect Status Register GPIO<63:32> */
|
|
#define GEDR2 __REG(0x40E00050) /* GPIO Edge Detect Status Register GPIO<80:64> */
|
|
|
|
#define GAFR0_L __REG(0x40E00054) /* GPIO Alternate Function Select Register GPIO<15:0> */
|
|
#define GAFR0_U __REG(0x40E00058) /* GPIO Alternate Function Select Register GPIO<31:16> */
|
|
#define GAFR1_L __REG(0x40E0005C) /* GPIO Alternate Function Select Register GPIO<47:32> */
|
|
#define GAFR1_U __REG(0x40E00060) /* GPIO Alternate Function Select Register GPIO<63:48> */
|
|
#define GAFR2_L __REG(0x40E00064) /* GPIO Alternate Function Select Register GPIO<79:64> */
|
|
#define GAFR2_U __REG(0x40E00068) /* GPIO Alternate Function Select Register GPIO<95-80> */
|
|
#define GAFR3_L __REG(0x40E0006C) /* GPIO Alternate Function Select Register GPIO<111:96> */
|
|
#define GAFR3_U __REG(0x40E00070) /* GPIO Alternate Function Select Register GPIO<127:112> */
|
|
|
|
#define GPLR3 __REG(0x40E00100) /* GPIO Pin-Level Register GPIO<127:96> */
|
|
#define GPDR3 __REG(0x40E0010C) /* GPIO Pin Direction Register GPIO<127:96> */
|
|
#define GPSR3 __REG(0x40E00118) /* GPIO Pin Output Set Register GPIO<127:96> */
|
|
#define GPCR3 __REG(0x40E00124) /* GPIO Pin Output Clear Register GPIO<127:96> */
|
|
#define GRER3 __REG(0x40E00130) /* GPIO Rising-Edge Detect Register GPIO<127:96> */
|
|
#define GFER3 __REG(0x40E0013C) /* GPIO Falling-Edge Detect Register GPIO<127:96> */
|
|
#define GEDR3 __REG(0x40E00148) /* GPIO Edge Detect Status Register GPIO<127:96> */
|
|
|
|
/* More handy macros. The argument is a literal GPIO number. */
|
|
|
|
#define GPIO_bit(x) (1 << ((x) & 0x1f))
|
|
|
|
#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
|
|
|
|
/* Interrupt Controller */
|
|
|
|
#define _GPLR(x) __REG2(0x40E00000, ((x) & 0x60) >> 3)
|
|
#define _GPDR(x) __REG2(0x40E0000C, ((x) & 0x60) >> 3)
|
|
#define _GPSR(x) __REG2(0x40E00018, ((x) & 0x60) >> 3)
|
|
#define _GPCR(x) __REG2(0x40E00024, ((x) & 0x60) >> 3)
|
|
#define _GRER(x) __REG2(0x40E00030, ((x) & 0x60) >> 3)
|
|
#define _GFER(x) __REG2(0x40E0003C, ((x) & 0x60) >> 3)
|
|
#define _GEDR(x) __REG2(0x40E00048, ((x) & 0x60) >> 3)
|
|
#define _GAFR(x) __REG2(0x40E00054, ((x) & 0x70) >> 2)
|
|
|
|
#define GPLR(x) (*((((x) & 0x7f) < 96) ? &_GPLR(x) : &GPLR3))
|
|
#define GPDR(x) (*((((x) & 0x7f) < 96) ? &_GPDR(x) : &GPDR3))
|
|
#define GPSR(x) (*((((x) & 0x7f) < 96) ? &_GPSR(x) : &GPSR3))
|
|
#define GPCR(x) (*((((x) & 0x7f) < 96) ? &_GPCR(x) : &GPCR3))
|
|
#define GRER(x) (*((((x) & 0x7f) < 96) ? &_GRER(x) : &GRER3))
|
|
#define GFER(x) (*((((x) & 0x7f) < 96) ? &_GFER(x) : &GFER3))
|
|
#define GEDR(x) (*((((x) & 0x7f) < 96) ? &_GEDR(x) : &GEDR3))
|
|
#define GAFR(x) (*((((x) & 0x7f) < 96) ? &_GAFR(x) : \
|
|
((((x) & 0x7f) < 112) ? &GAFR3_L : &GAFR3_U)))
|
|
#else
|
|
|
|
#define GPLR(x) __REG2(0x40E00000, ((x) & 0x60) >> 3)
|
|
#define GPDR(x) __REG2(0x40E0000C, ((x) & 0x60) >> 3)
|
|
#define GPSR(x) __REG2(0x40E00018, ((x) & 0x60) >> 3)
|
|
#define GPCR(x) __REG2(0x40E00024, ((x) & 0x60) >> 3)
|
|
#define GRER(x) __REG2(0x40E00030, ((x) & 0x60) >> 3)
|
|
#define GFER(x) __REG2(0x40E0003C, ((x) & 0x60) >> 3)
|
|
#define GEDR(x) __REG2(0x40E00048, ((x) & 0x60) >> 3)
|
|
#define GAFR(x) __REG2(0x40E00054, ((x) & 0x70) >> 2)
|
|
|
|
#endif
|
|
|
|
/*
|
|
* Power Manager - see pxa2xx-regs.h
|
|
*/
|
|
|
|
/*
|
|
* SSP Serial Port Registers - see arch/arm/mach-pxa/include/mach/regs-ssp.h
|
|
*/
|
|
|
|
/*
|
|
* MultiMediaCard (MMC) controller - see drivers/mmc/host/pxamci.h
|
|
*/
|
|
|
|
/*
|
|
* Core Clock - see arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
|
|
*/
|
|
|
|
#ifdef CONFIG_PXA27x
|
|
|
|
/* Camera Interface */
|
|
#define CICR0 __REG(0x50000000)
|
|
#define CICR1 __REG(0x50000004)
|
|
#define CICR2 __REG(0x50000008)
|
|
#define CICR3 __REG(0x5000000C)
|
|
#define CICR4 __REG(0x50000010)
|
|
#define CISR __REG(0x50000014)
|
|
#define CIFR __REG(0x50000018)
|
|
#define CITOR __REG(0x5000001C)
|
|
#define CIBR0 __REG(0x50000028)
|
|
#define CIBR1 __REG(0x50000030)
|
|
#define CIBR2 __REG(0x50000038)
|
|
|
|
#define CICR0_DMAEN (1 << 31) /* DMA request enable */
|
|
#define CICR0_PAR_EN (1 << 30) /* Parity enable */
|
|
#define CICR0_SL_CAP_EN (1 << 29) /* Capture enable for slave mode */
|
|
#define CICR0_ENB (1 << 28) /* Camera interface enable */
|
|
#define CICR0_DIS (1 << 27) /* Camera interface disable */
|
|
#define CICR0_SIM (0x7 << 24) /* Sensor interface mode mask */
|
|
#define CICR0_TOM (1 << 9) /* Time-out mask */
|
|
#define CICR0_RDAVM (1 << 8) /* Receive-data-available mask */
|
|
#define CICR0_FEM (1 << 7) /* FIFO-empty mask */
|
|
#define CICR0_EOLM (1 << 6) /* End-of-line mask */
|
|
#define CICR0_PERRM (1 << 5) /* Parity-error mask */
|
|
#define CICR0_QDM (1 << 4) /* Quick-disable mask */
|
|
#define CICR0_CDM (1 << 3) /* Disable-done mask */
|
|
#define CICR0_SOFM (1 << 2) /* Start-of-frame mask */
|
|
#define CICR0_EOFM (1 << 1) /* End-of-frame mask */
|
|
#define CICR0_FOM (1 << 0) /* FIFO-overrun mask */
|
|
|
|
#define CICR1_TBIT (1 << 31) /* Transparency bit */
|
|
#define CICR1_RGBT_CONV (0x3 << 29) /* RGBT conversion mask */
|
|
#define CICR1_PPL (0x7ff << 15) /* Pixels per line mask */
|
|
#define CICR1_RGB_CONV (0x7 << 12) /* RGB conversion mask */
|
|
#define CICR1_RGB_F (1 << 11) /* RGB format */
|
|
#define CICR1_YCBCR_F (1 << 10) /* YCbCr format */
|
|
#define CICR1_RGB_BPP (0x7 << 7) /* RGB bis per pixel mask */
|
|
#define CICR1_RAW_BPP (0x3 << 5) /* Raw bis per pixel mask */
|
|
#define CICR1_COLOR_SP (0x3 << 3) /* Color space mask */
|
|
#define CICR1_DW (0x7 << 0) /* Data width mask */
|
|
|
|
#define CICR2_BLW (0xff << 24) /* Beginning-of-line pixel clock
|
|
wait count mask */
|
|
#define CICR2_ELW (0xff << 16) /* End-of-line pixel clock
|
|
wait count mask */
|
|
#define CICR2_HSW (0x3f << 10) /* Horizontal sync pulse width mask */
|
|
#define CICR2_BFPW (0x3f << 3) /* Beginning-of-frame pixel clock
|
|
wait count mask */
|
|
#define CICR2_FSW (0x7 << 0) /* Frame stabilization
|
|
wait count mask */
|
|
|
|
#define CICR3_BFW (0xff << 24) /* Beginning-of-frame line clock
|
|
wait count mask */
|
|
#define CICR3_EFW (0xff << 16) /* End-of-frame line clock
|
|
wait count mask */
|
|
#define CICR3_VSW (0x3f << 10) /* Vertical sync pulse width mask */
|
|
#define CICR3_BFPW (0x3f << 3) /* Beginning-of-frame pixel clock
|
|
wait count mask */
|
|
#define CICR3_LPF (0x7ff << 0) /* Lines per frame mask */
|
|
|
|
#define CICR4_MCLK_DLY (0x3 << 24) /* MCLK Data Capture Delay mask */
|
|
#define CICR4_PCLK_EN (1 << 23) /* Pixel clock enable */
|
|
#define CICR4_PCP (1 << 22) /* Pixel clock polarity */
|
|
#define CICR4_HSP (1 << 21) /* Horizontal sync polarity */
|
|
#define CICR4_VSP (1 << 20) /* Vertical sync polarity */
|
|
#define CICR4_MCLK_EN (1 << 19) /* MCLK enable */
|
|
#define CICR4_FR_RATE (0x7 << 8) /* Frame rate mask */
|
|
#define CICR4_DIV (0xff << 0) /* Clock divisor mask */
|
|
|
|
#define CISR_FTO (1 << 15) /* FIFO time-out */
|
|
#define CISR_RDAV_2 (1 << 14) /* Channel 2 receive data available */
|
|
#define CISR_RDAV_1 (1 << 13) /* Channel 1 receive data available */
|
|
#define CISR_RDAV_0 (1 << 12) /* Channel 0 receive data available */
|
|
#define CISR_FEMPTY_2 (1 << 11) /* Channel 2 FIFO empty */
|
|
#define CISR_FEMPTY_1 (1 << 10) /* Channel 1 FIFO empty */
|
|
#define CISR_FEMPTY_0 (1 << 9) /* Channel 0 FIFO empty */
|
|
#define CISR_EOL (1 << 8) /* End of line */
|
|
#define CISR_PAR_ERR (1 << 7) /* Parity error */
|
|
#define CISR_CQD (1 << 6) /* Camera interface quick disable */
|
|
#define CISR_CDD (1 << 5) /* Camera interface disable done */
|
|
#define CISR_SOF (1 << 4) /* Start of frame */
|
|
#define CISR_EOF (1 << 3) /* End of frame */
|
|
#define CISR_IFO_2 (1 << 2) /* FIFO overrun for Channel 2 */
|
|
#define CISR_IFO_1 (1 << 1) /* FIFO overrun for Channel 1 */
|
|
#define CISR_IFO_0 (1 << 0) /* FIFO overrun for Channel 0 */
|
|
|
|
#define CIFR_FLVL2 (0x7f << 23) /* FIFO 2 level mask */
|
|
#define CIFR_FLVL1 (0x7f << 16) /* FIFO 1 level mask */
|
|
#define CIFR_FLVL0 (0xff << 8) /* FIFO 0 level mask */
|
|
#define CIFR_THL_0 (0x3 << 4) /* Threshold Level for Channel 0 FIFO */
|
|
#define CIFR_RESET_F (1 << 3) /* Reset input FIFOs */
|
|
#define CIFR_FEN2 (1 << 2) /* FIFO enable for channel 2 */
|
|
#define CIFR_FEN1 (1 << 1) /* FIFO enable for channel 1 */
|
|
#define CIFR_FEN0 (1 << 0) /* FIFO enable for channel 0 */
|
|
|
|
#define SRAM_SIZE 0x40000 /* 4x64K */
|
|
|
|
#define SRAM_MEM_PHYS 0x5C000000
|
|
|
|
#define IMPMCR __REG(0x58000000) /* IM Power Management Control Reg */
|
|
#define IMPMSR __REG(0x58000008) /* IM Power Management Status Reg */
|
|
|
|
#define IMPMCR_PC3 (0x3 << 22) /* Bank 3 Power Control */
|
|
#define IMPMCR_PC3_RUN_MODE (0x0 << 22) /* Run mode */
|
|
#define IMPMCR_PC3_STANDBY_MODE (0x1 << 22) /* Standby mode */
|
|
#define IMPMCR_PC3_AUTO_MODE (0x3 << 22) /* Automatically controlled */
|
|
|
|
#define IMPMCR_PC2 (0x3 << 20) /* Bank 2 Power Control */
|
|
#define IMPMCR_PC2_RUN_MODE (0x0 << 20) /* Run mode */
|
|
#define IMPMCR_PC2_STANDBY_MODE (0x1 << 20) /* Standby mode */
|
|
#define IMPMCR_PC2_AUTO_MODE (0x3 << 20) /* Automatically controlled */
|
|
|
|
#define IMPMCR_PC1 (0x3 << 18) /* Bank 1 Power Control */
|
|
#define IMPMCR_PC1_RUN_MODE (0x0 << 18) /* Run mode */
|
|
#define IMPMCR_PC1_STANDBY_MODE (0x1 << 18) /* Standby mode */
|
|
#define IMPMCR_PC1_AUTO_MODE (0x3 << 18) /* Automatically controlled */
|
|
|
|
#define IMPMCR_PC0 (0x3 << 16) /* Bank 0 Power Control */
|
|
#define IMPMCR_PC0_RUN_MODE (0x0 << 16) /* Run mode */
|
|
#define IMPMCR_PC0_STANDBY_MODE (0x1 << 16) /* Standby mode */
|
|
#define IMPMCR_PC0_AUTO_MODE (0x3 << 16) /* Automatically controlled */
|
|
|
|
#define IMPMCR_AW3 (1 << 11) /* Bank 3 Automatic Wake-up enable */
|
|
#define IMPMCR_AW2 (1 << 10) /* Bank 2 Automatic Wake-up enable */
|
|
#define IMPMCR_AW1 (1 << 9) /* Bank 1 Automatic Wake-up enable */
|
|
#define IMPMCR_AW0 (1 << 8) /* Bank 0 Automatic Wake-up enable */
|
|
|
|
#define IMPMCR_DST (0xFF << 0) /* Delay Standby Time, ms */
|
|
|
|
#define IMPMSR_PS3 (0x3 << 6) /* Bank 3 Power Status: */
|
|
#define IMPMSR_PS3_RUN_MODE (0x0 << 6) /* Run mode */
|
|
#define IMPMSR_PS3_STANDBY_MODE (0x1 << 6) /* Standby mode */
|
|
|
|
#define IMPMSR_PS2 (0x3 << 4) /* Bank 2 Power Status: */
|
|
#define IMPMSR_PS2_RUN_MODE (0x0 << 4) /* Run mode */
|
|
#define IMPMSR_PS2_STANDBY_MODE (0x1 << 4) /* Standby mode */
|
|
|
|
#define IMPMSR_PS1 (0x3 << 2) /* Bank 1 Power Status: */
|
|
#define IMPMSR_PS1_RUN_MODE (0x0 << 2) /* Run mode */
|
|
#define IMPMSR_PS1_STANDBY_MODE (0x1 << 2) /* Standby mode */
|
|
|
|
#define IMPMSR_PS0 (0x3 << 0) /* Bank 0 Power Status: */
|
|
#define IMPMSR_PS0_RUN_MODE (0x0 << 0) /* Run mode */
|
|
#define IMPMSR_PS0_STANDBY_MODE (0x1 << 0) /* Standby mode */
|
|
|
|
#endif
|
|
|
|
#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
|
|
/*
|
|
* UHC: USB Host Controller (OHCI-like) register definitions
|
|
*/
|
|
#define UHC_BASE_PHYS (0x4C000000)
|
|
#define UHCREV __REG(0x4C000000) /* UHC HCI Spec Revision */
|
|
#define UHCHCON __REG(0x4C000004) /* UHC Host Control Register */
|
|
#define UHCCOMS __REG(0x4C000008) /* UHC Command Status Register */
|
|
#define UHCINTS __REG(0x4C00000C) /* UHC Interrupt Status Register */
|
|
#define UHCINTE __REG(0x4C000010) /* UHC Interrupt Enable */
|
|
#define UHCINTD __REG(0x4C000014) /* UHC Interrupt Disable */
|
|
#define UHCHCCA __REG(0x4C000018) /* UHC Host Controller Comm. Area */
|
|
#define UHCPCED __REG(0x4C00001C) /* UHC Period Current Endpt Descr */
|
|
#define UHCCHED __REG(0x4C000020) /* UHC Control Head Endpt Descr */
|
|
#define UHCCCED __REG(0x4C000024) /* UHC Control Current Endpt Descr */
|
|
#define UHCBHED __REG(0x4C000028) /* UHC Bulk Head Endpt Descr */
|
|
#define UHCBCED __REG(0x4C00002C) /* UHC Bulk Current Endpt Descr */
|
|
#define UHCDHEAD __REG(0x4C000030) /* UHC Done Head */
|
|
#define UHCFMI __REG(0x4C000034) /* UHC Frame Interval */
|
|
#define UHCFMR __REG(0x4C000038) /* UHC Frame Remaining */
|
|
#define UHCFMN __REG(0x4C00003C) /* UHC Frame Number */
|
|
#define UHCPERS __REG(0x4C000040) /* UHC Periodic Start */
|
|
#define UHCLS __REG(0x4C000044) /* UHC Low Speed Threshold */
|
|
|
|
#define UHCRHDA __REG(0x4C000048) /* UHC Root Hub Descriptor A */
|
|
#define UHCRHDA_NOCP (1 << 12) /* No over current protection */
|
|
|
|
#define UHCRHDB __REG(0x4C00004C) /* UHC Root Hub Descriptor B */
|
|
#define UHCRHS __REG(0x4C000050) /* UHC Root Hub Status */
|
|
#define UHCRHPS1 __REG(0x4C000054) /* UHC Root Hub Port 1 Status */
|
|
#define UHCRHPS2 __REG(0x4C000058) /* UHC Root Hub Port 2 Status */
|
|
#define UHCRHPS3 __REG(0x4C00005C) /* UHC Root Hub Port 3 Status */
|
|
|
|
#define UHCSTAT __REG(0x4C000060) /* UHC Status Register */
|
|
#define UHCSTAT_UPS3 (1 << 16) /* USB Power Sense Port3 */
|
|
#define UHCSTAT_SBMAI (1 << 15) /* System Bus Master Abort Interrupt*/
|
|
#define UHCSTAT_SBTAI (1 << 14) /* System Bus Target Abort Interrupt*/
|
|
#define UHCSTAT_UPRI (1 << 13) /* USB Port Resume Interrupt */
|
|
#define UHCSTAT_UPS2 (1 << 12) /* USB Power Sense Port 2 */
|
|
#define UHCSTAT_UPS1 (1 << 11) /* USB Power Sense Port 1 */
|
|
#define UHCSTAT_HTA (1 << 10) /* HCI Target Abort */
|
|
#define UHCSTAT_HBA (1 << 8) /* HCI Buffer Active */
|
|
#define UHCSTAT_RWUE (1 << 7) /* HCI Remote Wake Up Event */
|
|
|
|
#define UHCHR __REG(0x4C000064) /* UHC Reset Register */
|
|
#define UHCHR_SSEP3 (1 << 11) /* Sleep Standby Enable for Port3 */
|
|
#define UHCHR_SSEP2 (1 << 10) /* Sleep Standby Enable for Port2 */
|
|
#define UHCHR_SSEP1 (1 << 9) /* Sleep Standby Enable for Port1 */
|
|
#define UHCHR_PCPL (1 << 7) /* Power control polarity low */
|
|
#define UHCHR_PSPL (1 << 6) /* Power sense polarity low */
|
|
#define UHCHR_SSE (1 << 5) /* Sleep Standby Enable */
|
|
#define UHCHR_UIT (1 << 4) /* USB Interrupt Test */
|
|
#define UHCHR_SSDC (1 << 3) /* Simulation Scale Down Clock */
|
|
#define UHCHR_CGR (1 << 2) /* Clock Generation Reset */
|
|
#define UHCHR_FHR (1 << 1) /* Force Host Controller Reset */
|
|
#define UHCHR_FSBIR (1 << 0) /* Force System Bus Iface Reset */
|
|
|
|
#define UHCHIE __REG(0x4C000068) /* UHC Interrupt Enable Register*/
|
|
#define UHCHIE_UPS3IE (1 << 14) /* Power Sense Port3 IntEn */
|
|
#define UHCHIE_UPRIE (1 << 13) /* Port Resume IntEn */
|
|
#define UHCHIE_UPS2IE (1 << 12) /* Power Sense Port2 IntEn */
|
|
#define UHCHIE_UPS1IE (1 << 11) /* Power Sense Port1 IntEn */
|
|
#define UHCHIE_TAIE (1 << 10) /* HCI Interface Transfer Abort
|
|
Interrupt Enable*/
|
|
#define UHCHIE_HBAIE (1 << 8) /* HCI Buffer Active IntEn */
|
|
#define UHCHIE_RWIE (1 << 7) /* Remote Wake-up IntEn */
|
|
|
|
#define UHCHIT __REG(0x4C00006C) /* UHC Interrupt Test register */
|
|
|
|
#endif /* CONFIG_PXA27x || CONFIG_PXA3xx */
|
|
|
|
/* PWRMODE register M field values */
|
|
|
|
#define PWRMODE_IDLE 0x1
|
|
#define PWRMODE_STANDBY 0x2
|
|
#define PWRMODE_SLEEP 0x3
|
|
#define PWRMODE_DEEPSLEEP 0x7
|
|
|
|
#endif
|