cec148c247
Most of the protocol modules for the pata_parport driver are missing a module description, causing warnings such as: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/ata/pata_parport/aten.o when compiling with W=1. Add the missing MODULE_DESCRIPTION() definitions to avoid these warnings. While at it, also add the missing MODULE_AUTHOR() definitions. Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
145 lines
3.1 KiB
C
145 lines
3.1 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* (c) 1997-8 Grant R. Guenther <grant@torque.net>
|
|
*
|
|
* aten.c is a low-level protocol driver for the ATEN EH-100
|
|
* parallel port adapter. The EH-100 supports 4-bit and 8-bit
|
|
* modes only. There is also an EH-132 which supports EPP mode
|
|
* transfers. The EH-132 is not yet supported.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/wait.h>
|
|
#include <linux/types.h>
|
|
#include <asm/io.h>
|
|
#include "pata_parport.h"
|
|
|
|
#define j44(a,b) ((((a>>4)&0x0f)|(b&0xf0))^0x88)
|
|
|
|
/*
|
|
* cont = 0 - access the IDE register file
|
|
* cont = 1 - access the IDE command set
|
|
*/
|
|
static int cont_map[2] = { 0x08, 0x20 };
|
|
|
|
static void aten_write_regr(struct pi_adapter *pi, int cont, int regr, int val)
|
|
{
|
|
int r = regr + cont_map[cont] + 0x80;
|
|
|
|
w0(r); w2(0xe); w2(6); w0(val); w2(7); w2(6); w2(0xc);
|
|
}
|
|
|
|
static int aten_read_regr(struct pi_adapter *pi, int cont, int regr)
|
|
{
|
|
int a, b, r;
|
|
|
|
r = regr + cont_map[cont] + 0x40;
|
|
|
|
switch (pi->mode) {
|
|
|
|
case 0:
|
|
w0(r); w2(0xe); w2(6);
|
|
w2(7); w2(6); w2(0);
|
|
a = r1(); w0(0x10); b = r1(); w2(0xc);
|
|
return j44(a,b);
|
|
|
|
case 1:
|
|
r |= 0x10;
|
|
w0(r); w2(0xe); w2(6); w0(0xff);
|
|
w2(0x27); w2(0x26); w2(0x20);
|
|
a = r0();
|
|
w2(0x26); w2(0xc);
|
|
return a;
|
|
}
|
|
return -1;
|
|
}
|
|
|
|
static void aten_read_block(struct pi_adapter *pi, char *buf, int count)
|
|
{
|
|
int k, a, b, c, d;
|
|
|
|
switch (pi->mode) {
|
|
|
|
case 0:
|
|
w0(0x48); w2(0xe); w2(6);
|
|
for (k = 0; k < count / 2; k++) {
|
|
w2(7); w2(6); w2(2);
|
|
a = r1(); w0(0x58); b = r1();
|
|
w2(0); d = r1(); w0(0x48); c = r1();
|
|
buf[2 * k] = j44(c, d);
|
|
buf[2 * k + 1] = j44(a, b);
|
|
}
|
|
w2(0xc);
|
|
break;
|
|
|
|
case 1:
|
|
w0(0x58); w2(0xe); w2(6);
|
|
for (k = 0; k < count / 2; k++) {
|
|
w2(0x27); w2(0x26); w2(0x22);
|
|
a = r0(); w2(0x20); b = r0();
|
|
buf[2 * k] = b;
|
|
buf[2 * k + 1] = a;
|
|
}
|
|
w2(0x26); w2(0xc);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void aten_write_block(struct pi_adapter *pi, char *buf, int count)
|
|
{
|
|
int k;
|
|
|
|
w0(0x88); w2(0xe); w2(6);
|
|
for (k = 0; k < count / 2; k++) {
|
|
w0(buf[2 * k + 1]); w2(0xe); w2(6);
|
|
w0(buf[2 * k]); w2(7); w2(6);
|
|
}
|
|
w2(0xc);
|
|
}
|
|
|
|
static void aten_connect(struct pi_adapter *pi)
|
|
{
|
|
pi->saved_r0 = r0();
|
|
pi->saved_r2 = r2();
|
|
w2(0xc);
|
|
}
|
|
|
|
static void aten_disconnect(struct pi_adapter *pi)
|
|
{
|
|
w0(pi->saved_r0);
|
|
w2(pi->saved_r2);
|
|
}
|
|
|
|
static void aten_log_adapter(struct pi_adapter *pi)
|
|
{
|
|
char *mode_string[2] = { "4-bit", "8-bit" };
|
|
|
|
dev_info(&pi->dev,
|
|
"ATEN EH-100 at 0x%x, mode %d (%s), delay %d\n",
|
|
pi->port, pi->mode, mode_string[pi->mode], pi->delay);
|
|
}
|
|
|
|
static struct pi_protocol aten = {
|
|
.owner = THIS_MODULE,
|
|
.name = "aten",
|
|
.max_mode = 2,
|
|
.epp_first = 2,
|
|
.default_delay = 1,
|
|
.max_units = 1,
|
|
.write_regr = aten_write_regr,
|
|
.read_regr = aten_read_regr,
|
|
.write_block = aten_write_block,
|
|
.read_block = aten_read_block,
|
|
.connect = aten_connect,
|
|
.disconnect = aten_disconnect,
|
|
.log_adapter = aten_log_adapter,
|
|
};
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("Grant R. Guenther <grant@torque.net>");
|
|
MODULE_DESCRIPTION("ATEN EH-100 parallel port IDE adapter protocol driver");
|
|
module_pata_parport_driver(aten);
|