kevin/linux
1
Fork 0
Code
861efc547c
linux/drivers/bluetooth/ath3k.c
Steven.Li 2d25f8b462 Bluetooth: Add Atheros AR3012 one PID/VID supported 
The new Ath3k needs to download patch and radio table,
and it keeps same PID/VID even after downloading the patch and radio
table. This patch is to use the bcdDevice (Device Release Number) to
judge whether the chip has been patched or not. The init bcdDevice
value of the chip is 0x0001, this value increases after patch and
radio table downloading.

Signed-off-by: Steven.Li <yongli@qca.qualcomm.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-07-01 14:48:02 -03:00

444 lines
10 KiB
C
Raw Blame History

/*
* Copyright (c) 2008-2009 Atheros Communications Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/device.h>
#include <linux/firmware.h>
#include <linux/usb.h>
#include <net/bluetooth/bluetooth.h>
#define VERSION "1.0"
#define ATH3K_DNLOAD 0x01
#define ATH3K_GETSTATE 0x05
#define ATH3K_SET_NORMAL_MODE 0x07
#define ATH3K_GETVERSION 0x09
#define USB_REG_SWITCH_VID_PID 0x0a
#define ATH3K_MODE_MASK 0x3F
#define ATH3K_NORMAL_MODE 0x0E
#define ATH3K_PATCH_UPDATE 0x80
#define ATH3K_SYSCFG_UPDATE 0x40
#define ATH3K_XTAL_FREQ_26M 0x00
#define ATH3K_XTAL_FREQ_40M 0x01
#define ATH3K_XTAL_FREQ_19P2 0x02
#define ATH3K_NAME_LEN 0xFF
struct ath3k_version {
unsigned int rom_version;
unsigned int build_version;
unsigned int ram_version;
unsigned char ref_clock;
unsigned char reserved[0x07];
};
static struct usb_device_id ath3k_table[] = {
/* Atheros AR3011 */
{ USB_DEVICE(0x0CF3, 0x3000) },
/* Atheros AR3011 with sflash firmware*/
{ USB_DEVICE(0x0CF3, 0x3002) },
{ USB_DEVICE(0x13d3, 0x3304) },
/* Atheros AR9285 Malbec with sflash firmware */
{ USB_DEVICE(0x03F0, 0x311D) },
/* Atheros AR3012 with sflash firmware*/
{ USB_DEVICE(0x0CF3, 0x3004) },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE02C) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, ath3k_table);
#define BTUSB_ATH3012 0x80
/* This table is to load patch and sysconfig files
* for AR3012 */
static struct usb_device_id ath3k_blist_tbl[] = {
/* Atheros AR3012 with sflash firmware*/
{ USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
{ } /* Terminating entry */
};
#define USB_REQ_DFU_DNLOAD 1
#define BULK_SIZE 4096
#define FW_HDR_SIZE 20
static int ath3k_load_firmware(struct usb_device *udev,
const struct firmware *firmware)
{
u8 *send_buf;
int err, pipe, len, size, sent = 0;
int count = firmware->size;
BT_DBG("udev %p", udev);
pipe = usb_sndctrlpipe(udev, 0);
send_buf = kmalloc(BULK_SIZE, GFP_ATOMIC);
if (!send_buf) {
BT_ERR("Can't allocate memory chunk for firmware");
return -ENOMEM;
}
memcpy(send_buf, firmware->data, 20);
if ((err = usb_control_msg(udev, pipe,
USB_REQ_DFU_DNLOAD,
USB_TYPE_VENDOR, 0, 0,
send_buf, 20, USB_CTRL_SET_TIMEOUT)) < 0) {
BT_ERR("Can't change to loading configuration err");
goto error;
}
sent += 20;
count -= 20;
while (count) {
size = min_t(uint, count, BULK_SIZE);
pipe = usb_sndbulkpipe(udev, 0x02);
memcpy(send_buf, firmware->data + sent, size);
err = usb_bulk_msg(udev, pipe, send_buf, size,
&len, 3000);
if (err || (len != size)) {
BT_ERR("Error in firmware loading err = %d,"
"len = %d, size = %d", err, len, size);
goto error;
}
sent += size;
count -= size;
}
error:
kfree(send_buf);
return err;
}
static int ath3k_get_state(struct usb_device *udev, unsigned char *state)
{
int pipe = 0;
pipe = usb_rcvctrlpipe(udev, 0);
return usb_control_msg(udev, pipe, ATH3K_GETSTATE,
USB_TYPE_VENDOR | USB_DIR_IN, 0, 0,
state, 0x01, USB_CTRL_SET_TIMEOUT);
}
static int ath3k_get_version(struct usb_device *udev,
struct ath3k_version *version)
{
int pipe = 0;
pipe = usb_rcvctrlpipe(udev, 0);
return usb_control_msg(udev, pipe, ATH3K_GETVERSION,
USB_TYPE_VENDOR | USB_DIR_IN, 0, 0, version,
sizeof(struct ath3k_version),
USB_CTRL_SET_TIMEOUT);
}
static int ath3k_load_fwfile(struct usb_device *udev,
const struct firmware *firmware)
{
u8 *send_buf;
int err, pipe, len, size, count, sent = 0;
int ret;
count = firmware->size;
send_buf = kmalloc(BULK_SIZE, GFP_ATOMIC);
if (!send_buf) {
BT_ERR("Can't allocate memory chunk for firmware");
return -ENOMEM;
}
size = min_t(uint, count, FW_HDR_SIZE);
memcpy(send_buf, firmware->data, size);
pipe = usb_sndctrlpipe(udev, 0);
ret = usb_control_msg(udev, pipe, ATH3K_DNLOAD,
USB_TYPE_VENDOR, 0, 0, send_buf,
size, USB_CTRL_SET_TIMEOUT);
if (ret < 0) {
BT_ERR("Can't change to loading configuration err");
kfree(send_buf);
return ret;
}
sent += size;
count -= size;
while (count) {
size = min_t(uint, count, BULK_SIZE);
pipe = usb_sndbulkpipe(udev, 0x02);
memcpy(send_buf, firmware->data + sent, size);
err = usb_bulk_msg(udev, pipe, send_buf, size,
&len, 3000);
if (err || (len != size)) {
BT_ERR("Error in firmware loading err = %d,"
"len = %d, size = %d", err, len, size);
kfree(send_buf);
return err;
}
sent += size;
count -= size;
}
kfree(send_buf);
return 0;
}
static int ath3k_switch_pid(struct usb_device *udev)
{
int pipe = 0;
pipe = usb_sndctrlpipe(udev, 0);
return usb_control_msg(udev, pipe, USB_REG_SWITCH_VID_PID,
USB_TYPE_VENDOR, 0, 0,
NULL, 0, USB_CTRL_SET_TIMEOUT);
}
static int ath3k_set_normal_mode(struct usb_device *udev)
{
unsigned char fw_state;
int pipe = 0, ret;
ret = ath3k_get_state(udev, &fw_state);
if (ret < 0) {
BT_ERR("Can't get state to change to normal mode err");
return ret;
}
if ((fw_state & ATH3K_MODE_MASK) == ATH3K_NORMAL_MODE) {
BT_DBG("firmware was already in normal mode");
return 0;
}
pipe = usb_sndctrlpipe(udev, 0);
return usb_control_msg(udev, pipe, ATH3K_SET_NORMAL_MODE,
USB_TYPE_VENDOR, 0, 0,
NULL, 0, USB_CTRL_SET_TIMEOUT);
}
static int ath3k_load_patch(struct usb_device *udev)
{
unsigned char fw_state;
char filename[ATH3K_NAME_LEN] = {0};
const struct firmware *firmware;
struct ath3k_version fw_version, pt_version;
int ret;
ret = ath3k_get_state(udev, &fw_state);
if (ret < 0) {
BT_ERR("Can't get state to change to load ram patch err");
return ret;
}
if (fw_state & ATH3K_PATCH_UPDATE) {
BT_DBG("Patch was already downloaded");
return 0;
}
ret = ath3k_get_version(udev, &fw_version);
if (ret < 0) {
BT_ERR("Can't get version to change to load ram patch err");
return ret;
}
snprintf(filename, ATH3K_NAME_LEN, "ar3k/AthrBT_0x%08x.dfu",
fw_version.rom_version);
ret = request_firmware(&firmware, filename, &udev->dev);
if (ret < 0) {
BT_ERR("Patch file not found %s", filename);
return ret;
}
pt_version.rom_version = *(int *)(firmware->data + firmware->size - 8);
pt_version.build_version = *(int *)
(firmware->data + firmware->size - 4);
if ((pt_version.rom_version != fw_version.rom_version) ||
(pt_version.build_version <= fw_version.build_version)) {
BT_ERR("Patch file version did not match with firmware");
release_firmware(firmware);
return -EINVAL;
}
ret = ath3k_load_fwfile(udev, firmware);
release_firmware(firmware);
return ret;
}
static int ath3k_load_syscfg(struct usb_device *udev)
{
unsigned char fw_state;
char filename[ATH3K_NAME_LEN] = {0};
const struct firmware *firmware;
struct ath3k_version fw_version;
int clk_value, ret;
ret = ath3k_get_state(udev, &fw_state);
if (ret < 0) {
BT_ERR("Can't get state to change to load configration err");
return -EBUSY;
}
ret = ath3k_get_version(udev, &fw_version);
if (ret < 0) {
BT_ERR("Can't get version to change to load ram patch err");
return ret;
}
switch (fw_version.ref_clock) {
case ATH3K_XTAL_FREQ_26M:
clk_value = 26;
break;
case ATH3K_XTAL_FREQ_40M:
clk_value = 40;
break;
case ATH3K_XTAL_FREQ_19P2:
clk_value = 19;
break;
default:
clk_value = 0;
break;
}
snprintf(filename, ATH3K_NAME_LEN, "ar3k/ramps_0x%08x_%d%s",
fw_version.rom_version, clk_value, ".dfu");
ret = request_firmware(&firmware, filename, &udev->dev);
if (ret < 0) {
BT_ERR("Configuration file not found %s", filename);
return ret;
}
ret = ath3k_load_fwfile(udev, firmware);
release_firmware(firmware);
return ret;
}
static int ath3k_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
const struct firmware *firmware;
struct usb_device *udev = interface_to_usbdev(intf);
int ret;
BT_DBG("intf %p id %p", intf, id);
if (intf->cur_altsetting->desc.bInterfaceNumber != 0)
return -ENODEV;
/* match device ID in ath3k blacklist table */
if (!id->driver_info) {
const struct usb_device_id *match;
match = usb_match_id(intf, ath3k_blist_tbl);
if (match)
id = match;
}
/* load patch and sysconfig files for AR3012 */
if (id->driver_info & BTUSB_ATH3012) {
/* New firmware with patch and sysconfig files already loaded */
if (le16_to_cpu(udev->descriptor.bcdDevice) > 0x0001)
return -ENODEV;
ret = ath3k_load_patch(udev);
if (ret < 0) {
BT_ERR("Loading patch file failed");
return ret;
}
ret = ath3k_load_syscfg(udev);
if (ret < 0) {
BT_ERR("Loading sysconfig file failed");
return ret;
}
ret = ath3k_set_normal_mode(udev);
if (ret < 0) {
BT_ERR("Set normal mode failed");
return ret;
}
ath3k_switch_pid(udev);
return 0;
}
if (request_firmware(&firmware, "ath3k-1.fw", &udev->dev) < 0) {
BT_ERR("Error loading firmware");
return -EIO;
}
ret = ath3k_load_firmware(udev, firmware);
release_firmware(firmware);
return ret;
}
static void ath3k_disconnect(struct usb_interface *intf)
{
BT_DBG("ath3k_disconnect intf %p", intf);
}
static struct usb_driver ath3k_driver = {
.name = "ath3k",
.probe = ath3k_probe,
.disconnect = ath3k_disconnect,
.id_table = ath3k_table,
};
static int __init ath3k_init(void)
{
BT_INFO("Atheros AR30xx firmware driver ver %s", VERSION);
return usb_register(&ath3k_driver);
}
static void __exit ath3k_exit(void)
{
usb_deregister(&ath3k_driver);
}
module_init(ath3k_init);
module_exit(ath3k_exit);
MODULE_AUTHOR("Atheros Communications");
MODULE_DESCRIPTION("Atheros AR30xx firmware driver");
MODULE_VERSION(VERSION);
MODULE_LICENSE("GPL");
MODULE_FIRMWARE("ath3k-1.fw");
View Git Blame Copy Permalink