1
linux/include/asm-cris/rtc.h
Jesper Nilsson d8468472e4 CRIS v10: Cleanup rtc.h
- Change RTC_VLOW_RD -> RTC_VL_READ, RTC_VLOW_SET -> RTC_VL_CLR
- Whitespace and formatting.
2008-02-08 11:06:29 +01:00

108 lines
3.3 KiB
C

#ifndef __RTC_H__
#define __RTC_H__
#ifdef CONFIG_ETRAX_DS1302
/* Dallas DS1302 clock/calendar register numbers. */
# define RTC_SECONDS 0
# define RTC_MINUTES 1
# define RTC_HOURS 2
# define RTC_DAY_OF_MONTH 3
# define RTC_MONTH 4
# define RTC_WEEKDAY 5
# define RTC_YEAR 6
# define RTC_CONTROL 7
/* Bits in CONTROL register. */
# define RTC_CONTROL_WRITEPROTECT 0x80
# define RTC_TRICKLECHARGER 8
/* Bits in TRICKLECHARGER register TCS TCS TCS TCS DS DS RS RS. */
# define RTC_TCR_PATTERN 0xA0 /* 1010xxxx */
# define RTC_TCR_1DIOD 0x04 /* xxxx01xx */
# define RTC_TCR_2DIOD 0x08 /* xxxx10xx */
# define RTC_TCR_DISABLED 0x00 /* xxxxxx00 Disabled */
# define RTC_TCR_2KOHM 0x01 /* xxxxxx01 2KOhm */
# define RTC_TCR_4KOHM 0x02 /* xxxxxx10 4kOhm */
# define RTC_TCR_8KOHM 0x03 /* xxxxxx11 8kOhm */
#elif defined(CONFIG_ETRAX_PCF8563)
/* I2C bus slave registers. */
# define RTC_I2C_READ 0xa3
# define RTC_I2C_WRITE 0xa2
/* Phillips PCF8563 registers. */
# define RTC_CONTROL1 0x00 /* Control/Status register 1. */
# define RTC_CONTROL2 0x01 /* Control/Status register 2. */
# define RTC_CLOCKOUT_FREQ 0x0d /* CLKOUT frequency. */
# define RTC_TIMER_CONTROL 0x0e /* Timer control. */
# define RTC_TIMER_CNTDOWN 0x0f /* Timer countdown. */
/* BCD encoded clock registers. */
# define RTC_SECONDS 0x02
# define RTC_MINUTES 0x03
# define RTC_HOURS 0x04
# define RTC_DAY_OF_MONTH 0x05
# define RTC_WEEKDAY 0x06 /* Not coded in BCD! */
# define RTC_MONTH 0x07
# define RTC_YEAR 0x08
# define RTC_MINUTE_ALARM 0x09
# define RTC_HOUR_ALARM 0x0a
# define RTC_DAY_ALARM 0x0b
# define RTC_WEEKDAY_ALARM 0x0c
#endif
#ifdef CONFIG_ETRAX_DS1302
extern unsigned char ds1302_readreg(int reg);
extern void ds1302_writereg(int reg, unsigned char val);
extern int ds1302_init(void);
# define CMOS_READ(x) ds1302_readreg(x)
# define CMOS_WRITE(val,reg) ds1302_writereg(reg,val)
# define RTC_INIT() ds1302_init()
#elif defined(CONFIG_ETRAX_PCF8563)
extern unsigned char pcf8563_readreg(int reg);
extern void pcf8563_writereg(int reg, unsigned char val);
extern int pcf8563_init(void);
# define CMOS_READ(x) pcf8563_readreg(x)
# define CMOS_WRITE(val,reg) pcf8563_writereg(reg,val)
# define RTC_INIT() pcf8563_init()
#else
/* No RTC configured so we shouldn't try to access any. */
# define CMOS_READ(x) 42
# define CMOS_WRITE(x,y)
# define RTC_INIT() (-1)
#endif
/*
* The struct used to pass data via the following ioctl. Similar to the
* struct tm in <time.h>, but it needs to be here so that the kernel
* source is self contained, allowing cross-compiles, etc. etc.
*/
struct rtc_time {
int tm_sec;
int tm_min;
int tm_hour;
int tm_mday;
int tm_mon;
int tm_year;
int tm_wday;
int tm_yday;
int tm_isdst;
};
/* ioctl() calls that are permitted to the /dev/rtc interface. */
#define RTC_MAGIC 'p'
/* Read RTC time. */
#define RTC_RD_TIME _IOR(RTC_MAGIC, 0x09, struct rtc_time)
/* Set RTC time. */
#define RTC_SET_TIME _IOW(RTC_MAGIC, 0x0a, struct rtc_time)
#define RTC_SET_CHARGE _IOW(RTC_MAGIC, 0x0b, int)
/* Voltage low detector */
#define RTC_VL_READ _IOR(RTC_MAGIC, 0x13, int)
/* Clear voltage low information */
#define RTC_VL_CLR _IO(RTC_MAGIC, 0x14)
#define RTC_MAX_IOCTL 0x14
#endif /* __RTC_H__ */