1
linux/include/asm-arm/arch-pxa
Guennadi Liakhovetski 3f3acefb63 [ARM] pxa: V4L2 soc_camera driver for PXA270
This patch adds a driver for the Quick Capture Interface on the PXA270.
It is based on the original driver from Intel, but has been re-worked
multiple times since then, now it also supports the V4L2 API.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-19 17:14:30 +01:00
..
akita.h
audio.h [ALSA] Remove sound/driver.h 2008-01-31 17:29:48 +01:00
bitfield.h
camera.h [ARM] pxa: V4L2 soc_camera driver for PXA270 2008-04-19 17:14:30 +01:00
cm-x270.h [ARM] 4576/1: CM-X270 machine support 2007-10-15 18:53:57 +01:00
colibri.h [ARM] 4762/1: Basic support for Toradex Colibri module 2008-01-28 13:13:27 +00:00
corgi.h [ARM] 4737/1: Refactor corgi_lcd to improve readability + bugfix 2008-01-28 13:13:25 +00:00
debug-macro.S
dma.h [ARM] 4576/1: CM-X270 machine support 2007-10-15 18:53:57 +01:00
entry-macro.S [ARM] 4840/1: pxa: fix the typo in get_irqnr_and_base 2008-02-29 22:47:23 +00:00
gpio.h gpiolib support for the PXA architecture 2008-02-05 09:44:13 -08:00
gumstix.h [ARM] 4867/1: Adds flash, udc, mci support for gumstix F boards 2008-04-19 11:29:06 +01:00
hardware.h [ARM] pxa: silence warnings from cpu_is_xxx() macros 2008-01-10 12:33:54 +00:00
i2c.h i2c-pxa: Add polling transfer 2008-01-27 18:14:50 +01:00
idp.h
io.h
irda.h [ARM] 4971/1: pxaficp_ir: provide startup and shutdown hooks 2008-04-19 11:29:08 +01:00
irqs.h [ARM] 4948/1: magician: use htc-egpio to drive the GPIO/IRQ expander CPLD 2008-04-19 11:29:07 +01:00
littleton.h [ARM] pxa: add basic support for Littleton (PXA3xx Form Factor Platform) 2008-01-28 13:13:17 +00:00
lpd270.h
lubbock.h
magician.h [ARM] 4952/1: magician: add LCD detection, LCD power switching, update pxafb settings 2008-04-19 11:29:07 +01:00
mainstone.h
memory.h [ARM] 4576/1: CM-X270 machine support 2007-10-15 18:53:57 +01:00
mfp-pxa2xx.h [ARM] pxa: allow dynamic enable/disable of GPIO wakeup for pxa{25x,27x} 2008-04-19 11:29:05 +01:00
mfp-pxa3xx.h [ARM] pxa: make MFP configuration processor independent 2008-01-26 15:07:56 +00:00
mfp-pxa25x.h [ARM] pxa: add MFP-alike pin configuration support for pxa{25x, 27x} 2008-04-19 11:29:04 +01:00
mfp-pxa27x.h [ARM] pxa: allow dynamic enable/disable of GPIO wakeup for pxa{25x,27x} 2008-04-19 11:29:05 +01:00
mfp-pxa300.h [ARM] pxa: introduce a new file mfp-pxa3xx.h for common pin configurations 2008-01-26 15:07:56 +00:00
mfp-pxa320.h [ARM] pxa: introduce a new file mfp-pxa3xx.h for common pin configurations 2008-01-26 15:07:56 +00:00
mfp.h [ARM] pxa: make MFP configuration processor independent 2008-01-26 15:07:56 +00:00
mmc.h [ARM] pxa: mmc: add 3rd host controller support for pxa310 2008-01-26 15:07:53 +00:00
mtd-xip.h
ohci.h
pcm027.h [ARM] 4744/1: pcm027: add support for phyCORE-PXA270 CPU module 2008-01-28 13:13:20 +00:00
pcm990_baseboard.h [ARM] 4747/1: pcm027: support for pcm990 baseboard for phyCORE-PXA270 2008-01-28 13:13:24 +00:00
pm.h PM: Move definition of struct pm_ops to suspend.h 2007-10-18 14:37:18 -07:00
poodle.h
pxa2xx_spi.h [ARM] pxa: make pxa2xx_spi driver use ssp_request()/ssp_free() 2008-01-26 15:07:52 +00:00
pxa2xx-gpio.h [ARM] pxa: V4L2 soc_camera driver for PXA270 2008-04-19 17:14:30 +01:00
pxa2xx-regs.h [ARM] pxa: move memory controller registers into pxa2xx-regs.h 2008-01-26 15:07:54 +00:00
pxa3xx-regs.h [ARM] 4830/1: Add support for the CLK_POUT pin on PXA3xx CPUs 2008-04-19 11:29:02 +01:00
pxa27x_keypad.h [ARM] pxa: add pxa27x_keypad device and pxa_set_keypad_info() 2008-04-19 11:29:05 +01:00
pxa-regs.h [ARM] 4959/1: PXA: Fix misprint in CICR1_RGBT_CONV 2008-04-19 11:29:07 +01:00
pxafb.h pxafb: Add support for other palette formats 2007-10-16 09:43:15 -07:00
regs-ssp.h spi: pxa2xx_spi clock polarity fix 2008-02-23 17:12:14 -08:00
sharpsl.h [ARM] 4737/1: Refactor corgi_lcd to improve readability + bugfix 2008-01-28 13:13:25 +00:00
spitz.h [ARM] 4737/1: Refactor corgi_lcd to improve readability + bugfix 2008-01-28 13:13:25 +00:00
ssp.h [ARM] pxa: define "struct ssp_device" and add ssp_request()/ssp_free() 2008-01-26 15:07:51 +00:00
system.h
timex.h [ARM] pxa: PXA3xx base support 2007-10-15 18:53:43 +01:00
tosa.h [ARM] 5002/1: tosa: add two more leds 2008-04-19 11:29:09 +01:00
trizeps4.h
udc.h USB: pxa2xx_udc: use generic gpio layer 2007-07-12 16:34:42 -07:00
uncompress.h [ARM] 4718/1: Fix redefinition warnings in PXA uncompressor code 2008-01-26 15:07:52 +00:00
vmalloc.h
zylonite.h [ARM] 4976/1: zylonite: Configure GPIO for WM9713 IRQ line 2008-04-19 11:29:09 +01:00