1
linux/include/asm-arm/arch-l7200/hardware.h
Russell King 74d02fb954 [ARM] Move FLUSH_BASE macros to asm/arch/memory.h
FLUSH_BASE must be visible to arch/arm/mm/init.c in order for the
memory region to be setup.  Move these definitions from
asm-arm/arch-*/hardware.h into asm-arm/arch-*/memory.h where mm
stuff can see them.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-07 13:22:21 +01:00

58 lines
1.6 KiB
C

/*
* linux/include/asm-arm/arch-l7200/hardware.h
*
* Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
* Steve Hill (sjhill@cotw.com)
*
* This file contains the hardware definitions for the
* LinkUp Systems L7200 SOC development board.
*
* Changelog:
* 02-01-2000 RS Created L7200 version, derived from rpc code
* 03-21-2000 SJH Cleaned up file
* 04-21-2000 RS Changed mapping of I/O in virtual space
* 04-25-2000 SJH Removed unused symbols and such
* 05-05-2000 SJH Complete rewrite
* 07-31-2000 SJH Added undocumented debug auxillary port to
* get at last two columns for keyboard driver
*/
#ifndef __ASM_ARCH_HARDWARE_H
#define __ASM_ARCH_HARDWARE_H
/* Hardware addresses of major areas.
* *_START is the physical address
* *_SIZE is the size of the region
* *_BASE is the virtual address
*/
#define RAM_START 0xf0000000
#define RAM_SIZE 0x02000000
#define RAM_BASE 0xc0000000
#define IO_START 0x80000000 /* I/O */
#define IO_SIZE 0x01000000
#define IO_BASE 0xd0000000
#define IO_START_2 0x90000000 /* I/O */
#define IO_SIZE_2 0x01000000
#define IO_BASE_2 0xd1000000
#define AUX_START 0x1a000000 /* AUX PORT */
#define AUX_SIZE 0x01000000
#define AUX_BASE 0xd2000000
#define FLASH1_START 0x00000000 /* FLASH BANK 1 */
#define FLASH1_SIZE 0x01000000
#define FLASH1_BASE 0xd3000000
#define FLASH2_START 0x10000000 /* FLASH BANK 2 */
#define FLASH2_SIZE 0x01000000
#define FLASH2_BASE 0xd4000000
#define ISA_START 0x20000000 /* ISA */
#define ISA_SIZE 0x20000000
#define ISA_BASE 0xe0000000
#define PCIO_BASE IO_BASE
#endif