kevin/linux
1
Fork 0
Code
7b9c7321ca
linux/include/asm-generic/vmlinux.lds.h
Steven Rostedt 9fd49328fc ftrace: Sort all function addresses, not just per page 
Instead of just sorting the ip's of the functions per ftrace page,
sort the entire list before adding them to the ftrace pages.

This will allow the bsearch algorithm to be sped up as it can
also sort by pages, not just records within a page.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-16 19:58:44 -04:00

806 lines
24 KiB
C
Raw Blame History

/*
* Helper macros to support writing architecture specific
* linker scripts.
*
* A minimal linker scripts has following content:
* [This is a sample, architectures may have special requiriements]
*
* OUTPUT_FORMAT(...)
* OUTPUT_ARCH(...)
* ENTRY(...)
* SECTIONS
* {
* . = START;
* __init_begin = .;
* HEAD_TEXT_SECTION
* INIT_TEXT_SECTION(PAGE_SIZE)
* INIT_DATA_SECTION(...)
* PERCPU_SECTION(CACHELINE_SIZE)
* __init_end = .;
*
* _stext = .;
* TEXT_SECTION = 0
* _etext = .;
*
* _sdata = .;
* RO_DATA_SECTION(PAGE_SIZE)
* RW_DATA_SECTION(...)
* _edata = .;
*
* EXCEPTION_TABLE(...)
* NOTES
*
* BSS_SECTION(0, 0, 0)
* _end = .;
*
* STABS_DEBUG
* DWARF_DEBUG
*
* DISCARDS // must be the last
* }
*
* [__init_begin, __init_end] is the init section that may be freed after init
* [_stext, _etext] is the text section
* [_sdata, _edata] is the data section
*
* Some of the included output section have their own set of constants.
* Examples are: [__initramfs_start, __initramfs_end] for initramfs and
* [__nosave_begin, __nosave_end] for the nosave data
*/
#ifndef LOAD_OFFSET
#define LOAD_OFFSET 0
#endif
#ifndef SYMBOL_PREFIX
#define VMLINUX_SYMBOL(sym) sym
#else
#define PASTE2(x,y) x##y
#define PASTE(x,y) PASTE2(x,y)
#define VMLINUX_SYMBOL(sym) PASTE(SYMBOL_PREFIX, sym)
#endif
/* Align . to a 8 byte boundary equals to maximum function alignment. */
#define ALIGN_FUNCTION() . = ALIGN(8)
/*
* Align to a 32 byte boundary equal to the
* alignment gcc 4.5 uses for a struct
*/
#define STRUCT_ALIGNMENT 32
#define STRUCT_ALIGN() . = ALIGN(STRUCT_ALIGNMENT)
/* The actual configuration determine if the init/exit sections
* are handled as text/data or they can be discarded (which
* often happens at runtime)
*/
#ifdef CONFIG_HOTPLUG
#define DEV_KEEP(sec) *(.dev##sec)
#define DEV_DISCARD(sec)
#else
#define DEV_KEEP(sec)
#define DEV_DISCARD(sec) *(.dev##sec)
#endif
#ifdef CONFIG_HOTPLUG_CPU
#define CPU_KEEP(sec) *(.cpu##sec)
#define CPU_DISCARD(sec)
#else
#define CPU_KEEP(sec)
#define CPU_DISCARD(sec) *(.cpu##sec)
#endif
#if defined(CONFIG_MEMORY_HOTPLUG)
#define MEM_KEEP(sec) *(.mem##sec)
#define MEM_DISCARD(sec)
#else
#define MEM_KEEP(sec)
#define MEM_DISCARD(sec) *(.mem##sec)
#endif
#ifdef CONFIG_FTRACE_MCOUNT_RECORD
#define MCOUNT_REC() . = ALIGN(8); \
VMLINUX_SYMBOL(__start_mcount_loc) = .; \
*(__mcount_loc) \
VMLINUX_SYMBOL(__stop_mcount_loc) = .;
#else
#define MCOUNT_REC()
#endif
#ifdef CONFIG_TRACE_BRANCH_PROFILING
#define LIKELY_PROFILE() VMLINUX_SYMBOL(__start_annotated_branch_profile) = .; \
*(_ftrace_annotated_branch) \
VMLINUX_SYMBOL(__stop_annotated_branch_profile) = .;
#else
#define LIKELY_PROFILE()
#endif
#ifdef CONFIG_PROFILE_ALL_BRANCHES
#define BRANCH_PROFILE() VMLINUX_SYMBOL(__start_branch_profile) = .; \
*(_ftrace_branch) \
VMLINUX_SYMBOL(__stop_branch_profile) = .;
#else
#define BRANCH_PROFILE()
#endif
#ifdef CONFIG_EVENT_TRACING
#define FTRACE_EVENTS() . = ALIGN(8); \
VMLINUX_SYMBOL(__start_ftrace_events) = .; \
*(_ftrace_events) \
VMLINUX_SYMBOL(__stop_ftrace_events) = .;
#else
#define FTRACE_EVENTS()
#endif
#ifdef CONFIG_TRACING
#define TRACE_PRINTKS() VMLINUX_SYMBOL(__start___trace_bprintk_fmt) = .; \
*(__trace_printk_fmt) /* Trace_printk fmt' pointer */ \
VMLINUX_SYMBOL(__stop___trace_bprintk_fmt) = .;
#else
#define TRACE_PRINTKS()
#endif
#ifdef CONFIG_FTRACE_SYSCALLS
#define TRACE_SYSCALLS() . = ALIGN(8); \
VMLINUX_SYMBOL(__start_syscalls_metadata) = .; \
*(__syscalls_metadata) \
VMLINUX_SYMBOL(__stop_syscalls_metadata) = .;
#else
#define TRACE_SYSCALLS()
#endif
#define KERNEL_DTB() \
STRUCT_ALIGN(); \
VMLINUX_SYMBOL(__dtb_start) = .; \
*(.dtb.init.rodata) \
VMLINUX_SYMBOL(__dtb_end) = .;
/* .data section */
#define DATA_DATA \
*(.data) \
*(.ref.data) \
*(.data..shared_aligned) /* percpu related */ \
DEV_KEEP(init.data) \
DEV_KEEP(exit.data) \
CPU_KEEP(init.data) \
CPU_KEEP(exit.data) \
MEM_KEEP(init.data) \
MEM_KEEP(exit.data) \
*(.data.unlikely) \
STRUCT_ALIGN(); \
*(__tracepoints) \
/* implement dynamic printk debug */ \
. = ALIGN(8); \
VMLINUX_SYMBOL(__start___jump_table) = .; \
*(__jump_table) \
VMLINUX_SYMBOL(__stop___jump_table) = .; \
. = ALIGN(8); \
VMLINUX_SYMBOL(__start___verbose) = .; \
*(__verbose) \
VMLINUX_SYMBOL(__stop___verbose) = .; \
LIKELY_PROFILE() \
BRANCH_PROFILE() \
TRACE_PRINTKS()
/*
* Data section helpers
*/
#define NOSAVE_DATA \
. = ALIGN(PAGE_SIZE); \
VMLINUX_SYMBOL(__nosave_begin) = .; \
*(.data..nosave) \
. = ALIGN(PAGE_SIZE); \
VMLINUX_SYMBOL(__nosave_end) = .;
#define PAGE_ALIGNED_DATA(page_align) \
. = ALIGN(page_align); \
*(.data..page_aligned)
#define READ_MOSTLY_DATA(align) \
. = ALIGN(align); \
*(.data..read_mostly) \
. = ALIGN(align);
#define CACHELINE_ALIGNED_DATA(align) \
. = ALIGN(align); \
*(.data..cacheline_aligned)
#define INIT_TASK_DATA(align) \
. = ALIGN(align); \
*(.data..init_task)
/*
* Read only Data
*/
#define RO_DATA_SECTION(align) \
. = ALIGN((align)); \
.rodata : AT(ADDR(.rodata) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__start_rodata) = .; \
*(.rodata) *(.rodata.*) \
*(__vermagic) /* Kernel version magic */ \
. = ALIGN(8); \
VMLINUX_SYMBOL(__start___tracepoints_ptrs) = .; \
*(__tracepoints_ptrs) /* Tracepoints: pointer array */\
VMLINUX_SYMBOL(__stop___tracepoints_ptrs) = .; \
*(__tracepoints_strings)/* Tracepoints: strings */ \
} \
\
.rodata1 : AT(ADDR(.rodata1) - LOAD_OFFSET) { \
*(.rodata1) \
} \
\
BUG_TABLE \
\
/* PCI quirks */ \
.pci_fixup : AT(ADDR(.pci_fixup) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__start_pci_fixups_early) = .; \
*(.pci_fixup_early) \
VMLINUX_SYMBOL(__end_pci_fixups_early) = .; \
VMLINUX_SYMBOL(__start_pci_fixups_header) = .; \
*(.pci_fixup_header) \
VMLINUX_SYMBOL(__end_pci_fixups_header) = .; \
VMLINUX_SYMBOL(__start_pci_fixups_final) = .; \
*(.pci_fixup_final) \
VMLINUX_SYMBOL(__end_pci_fixups_final) = .; \
VMLINUX_SYMBOL(__start_pci_fixups_enable) = .; \
*(.pci_fixup_enable) \
VMLINUX_SYMBOL(__end_pci_fixups_enable) = .; \
VMLINUX_SYMBOL(__start_pci_fixups_resume) = .; \
*(.pci_fixup_resume) \
VMLINUX_SYMBOL(__end_pci_fixups_resume) = .; \
VMLINUX_SYMBOL(__start_pci_fixups_resume_early) = .; \
*(.pci_fixup_resume_early) \
VMLINUX_SYMBOL(__end_pci_fixups_resume_early) = .; \
VMLINUX_SYMBOL(__start_pci_fixups_suspend) = .; \
*(.pci_fixup_suspend) \
VMLINUX_SYMBOL(__end_pci_fixups_suspend) = .; \
} \
\
/* Built-in firmware blobs */ \
.builtin_fw : AT(ADDR(.builtin_fw) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__start_builtin_fw) = .; \
*(.builtin_fw) \
VMLINUX_SYMBOL(__end_builtin_fw) = .; \
} \
\
/* RapidIO route ops */ \
.rio_ops : AT(ADDR(.rio_ops) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__start_rio_switch_ops) = .; \
*(.rio_switch_ops) \
VMLINUX_SYMBOL(__end_rio_switch_ops) = .; \
} \
\
TRACEDATA \
\
/* Kernel symbol table: Normal symbols */ \
__ksymtab : AT(ADDR(__ksymtab) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__start___ksymtab) = .; \
*(SORT(___ksymtab+*)) \
VMLINUX_SYMBOL(__stop___ksymtab) = .; \
} \
\
/* Kernel symbol table: GPL-only symbols */ \
__ksymtab_gpl : AT(ADDR(__ksymtab_gpl) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__start___ksymtab_gpl) = .; \
*(SORT(___ksymtab_gpl+*)) \
VMLINUX_SYMBOL(__stop___ksymtab_gpl) = .; \
} \
\
/* Kernel symbol table: Normal unused symbols */ \
__ksymtab_unused : AT(ADDR(__ksymtab_unused) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__start___ksymtab_unused) = .; \
*(SORT(___ksymtab_unused+*)) \
VMLINUX_SYMBOL(__stop___ksymtab_unused) = .; \
} \
\
/* Kernel symbol table: GPL-only unused symbols */ \
__ksymtab_unused_gpl : AT(ADDR(__ksymtab_unused_gpl) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__start___ksymtab_unused_gpl) = .; \
*(SORT(___ksymtab_unused_gpl+*)) \
VMLINUX_SYMBOL(__stop___ksymtab_unused_gpl) = .; \
} \
\
/* Kernel symbol table: GPL-future-only symbols */ \
__ksymtab_gpl_future : AT(ADDR(__ksymtab_gpl_future) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__start___ksymtab_gpl_future) = .; \
*(SORT(___ksymtab_gpl_future+*)) \
VMLINUX_SYMBOL(__stop___ksymtab_gpl_future) = .; \
} \
\
/* Kernel symbol table: Normal symbols */ \
__kcrctab : AT(ADDR(__kcrctab) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__start___kcrctab) = .; \
*(SORT(___kcrctab+*)) \
VMLINUX_SYMBOL(__stop___kcrctab) = .; \
} \
\
/* Kernel symbol table: GPL-only symbols */ \
__kcrctab_gpl : AT(ADDR(__kcrctab_gpl) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__start___kcrctab_gpl) = .; \
*(SORT(___kcrctab_gpl+*)) \
VMLINUX_SYMBOL(__stop___kcrctab_gpl) = .; \
} \
\
/* Kernel symbol table: Normal unused symbols */ \
__kcrctab_unused : AT(ADDR(__kcrctab_unused) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__start___kcrctab_unused) = .; \
*(SORT(___kcrctab_unused+*)) \
VMLINUX_SYMBOL(__stop___kcrctab_unused) = .; \
} \
\
/* Kernel symbol table: GPL-only unused symbols */ \
__kcrctab_unused_gpl : AT(ADDR(__kcrctab_unused_gpl) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__start___kcrctab_unused_gpl) = .; \
*(SORT(___kcrctab_unused_gpl+*)) \
VMLINUX_SYMBOL(__stop___kcrctab_unused_gpl) = .; \
} \
\
/* Kernel symbol table: GPL-future-only symbols */ \
__kcrctab_gpl_future : AT(ADDR(__kcrctab_gpl_future) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__start___kcrctab_gpl_future) = .; \
*(SORT(___kcrctab_gpl_future+*)) \
VMLINUX_SYMBOL(__stop___kcrctab_gpl_future) = .; \
} \
\
/* Kernel symbol table: strings */ \
__ksymtab_strings : AT(ADDR(__ksymtab_strings) - LOAD_OFFSET) { \
*(__ksymtab_strings) \
} \
\
/* __*init sections */ \
__init_rodata : AT(ADDR(__init_rodata) - LOAD_OFFSET) { \
*(.ref.rodata) \
DEV_KEEP(init.rodata) \
DEV_KEEP(exit.rodata) \
CPU_KEEP(init.rodata) \
CPU_KEEP(exit.rodata) \
MEM_KEEP(init.rodata) \
MEM_KEEP(exit.rodata) \
} \
\
/* Built-in module parameters. */ \
__param : AT(ADDR(__param) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__start___param) = .; \
*(__param) \
VMLINUX_SYMBOL(__stop___param) = .; \
} \
\
/* Built-in module versions. */ \
__modver : AT(ADDR(__modver) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__start___modver) = .; \
*(__modver) \
VMLINUX_SYMBOL(__stop___modver) = .; \
. = ALIGN((align)); \
VMLINUX_SYMBOL(__end_rodata) = .; \
} \
. = ALIGN((align));
/* RODATA & RO_DATA provided for backward compatibility.
* All archs are supposed to use RO_DATA() */
#define RODATA RO_DATA_SECTION(4096)
#define RO_DATA(align) RO_DATA_SECTION(align)
#define SECURITY_INIT \
.security_initcall.init : AT(ADDR(.security_initcall.init) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__security_initcall_start) = .; \
*(.security_initcall.init) \
VMLINUX_SYMBOL(__security_initcall_end) = .; \
}
/* .text section. Map to function alignment to avoid address changes
* during second ld run in second ld pass when generating System.map */
#define TEXT_TEXT \
ALIGN_FUNCTION(); \
*(.text.hot) \
*(.text) \
*(.ref.text) \
DEV_KEEP(init.text) \
DEV_KEEP(exit.text) \
CPU_KEEP(init.text) \
CPU_KEEP(exit.text) \
MEM_KEEP(init.text) \
MEM_KEEP(exit.text) \
*(.text.unlikely)
/* sched.text is aling to function alignment to secure we have same
* address even at second ld pass when generating System.map */
#define SCHED_TEXT \
ALIGN_FUNCTION(); \
VMLINUX_SYMBOL(__sched_text_start) = .; \
*(.sched.text) \
VMLINUX_SYMBOL(__sched_text_end) = .;
/* spinlock.text is aling to function alignment to secure we have same
* address even at second ld pass when generating System.map */
#define LOCK_TEXT \
ALIGN_FUNCTION(); \
VMLINUX_SYMBOL(__lock_text_start) = .; \
*(.spinlock.text) \
VMLINUX_SYMBOL(__lock_text_end) = .;
#define KPROBES_TEXT \
ALIGN_FUNCTION(); \
VMLINUX_SYMBOL(__kprobes_text_start) = .; \
*(.kprobes.text) \
VMLINUX_SYMBOL(__kprobes_text_end) = .;
#define ENTRY_TEXT \
ALIGN_FUNCTION(); \
VMLINUX_SYMBOL(__entry_text_start) = .; \
*(.entry.text) \
VMLINUX_SYMBOL(__entry_text_end) = .;
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
#define IRQENTRY_TEXT \
ALIGN_FUNCTION(); \
VMLINUX_SYMBOL(__irqentry_text_start) = .; \
*(.irqentry.text) \
VMLINUX_SYMBOL(__irqentry_text_end) = .;
#else
#define IRQENTRY_TEXT
#endif
/* Section used for early init (in .S files) */
#define HEAD_TEXT *(.head.text)
#define HEAD_TEXT_SECTION \
.head.text : AT(ADDR(.head.text) - LOAD_OFFSET) { \
HEAD_TEXT \
}
/*
* Exception table
*/
#define EXCEPTION_TABLE(align) \
. = ALIGN(align); \
__ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__start___ex_table) = .; \
*(__ex_table) \
VMLINUX_SYMBOL(__stop___ex_table) = .; \
}
/*
* Init task
*/
#define INIT_TASK_DATA_SECTION(align) \
. = ALIGN(align); \
.data..init_task : AT(ADDR(.data..init_task) - LOAD_OFFSET) { \
INIT_TASK_DATA(align) \
}
#ifdef CONFIG_CONSTRUCTORS
#define KERNEL_CTORS() . = ALIGN(8); \
VMLINUX_SYMBOL(__ctors_start) = .; \
*(.ctors) \
VMLINUX_SYMBOL(__ctors_end) = .;
#else
#define KERNEL_CTORS()
#endif
/* init and exit section handling */
#define INIT_DATA \
*(.init.data) \
DEV_DISCARD(init.data) \
CPU_DISCARD(init.data) \
MEM_DISCARD(init.data) \
KERNEL_CTORS() \
MCOUNT_REC() \
*(.init.rodata) \
FTRACE_EVENTS() \
TRACE_SYSCALLS() \
DEV_DISCARD(init.rodata) \
CPU_DISCARD(init.rodata) \
MEM_DISCARD(init.rodata) \
KERNEL_DTB()
#define INIT_TEXT \
*(.init.text) \
DEV_DISCARD(init.text) \
CPU_DISCARD(init.text) \
MEM_DISCARD(init.text)
#define EXIT_DATA \
*(.exit.data) \
DEV_DISCARD(exit.data) \
DEV_DISCARD(exit.rodata) \
CPU_DISCARD(exit.data) \
CPU_DISCARD(exit.rodata) \
MEM_DISCARD(exit.data) \
MEM_DISCARD(exit.rodata)
#define EXIT_TEXT \
*(.exit.text) \
DEV_DISCARD(exit.text) \
CPU_DISCARD(exit.text) \
MEM_DISCARD(exit.text)
#define EXIT_CALL \
*(.exitcall.exit)
/*
* bss (Block Started by Symbol) - uninitialized data
* zeroed during startup
*/
#define SBSS(sbss_align) \
. = ALIGN(sbss_align); \
.sbss : AT(ADDR(.sbss) - LOAD_OFFSET) { \
*(.sbss) \
*(.scommon) \
}
#define BSS(bss_align) \
. = ALIGN(bss_align); \
.bss : AT(ADDR(.bss) - LOAD_OFFSET) { \
*(.bss..page_aligned) \
*(.dynbss) \
*(.bss) \
*(COMMON) \
}
/*
* DWARF debug sections.
* Symbols in the DWARF debugging sections are relative to
* the beginning of the section so we begin them at 0.
*/
#define DWARF_DEBUG \
/* DWARF 1 */ \
.debug 0 : { *(.debug) } \
.line 0 : { *(.line) } \
/* GNU DWARF 1 extensions */ \
.debug_srcinfo 0 : { *(.debug_srcinfo) } \
.debug_sfnames 0 : { *(.debug_sfnames) } \
/* DWARF 1.1 and DWARF 2 */ \
.debug_aranges 0 : { *(.debug_aranges) } \
.debug_pubnames 0 : { *(.debug_pubnames) } \
/* DWARF 2 */ \
.debug_info 0 : { *(.debug_info \
.gnu.linkonce.wi.*) } \
.debug_abbrev 0 : { *(.debug_abbrev) } \
.debug_line 0 : { *(.debug_line) } \
.debug_frame 0 : { *(.debug_frame) } \
.debug_str 0 : { *(.debug_str) } \
.debug_loc 0 : { *(.debug_loc) } \
.debug_macinfo 0 : { *(.debug_macinfo) } \
/* SGI/MIPS DWARF 2 extensions */ \
.debug_weaknames 0 : { *(.debug_weaknames) } \
.debug_funcnames 0 : { *(.debug_funcnames) } \
.debug_typenames 0 : { *(.debug_typenames) } \
.debug_varnames 0 : { *(.debug_varnames) } \
/* Stabs debugging sections. */
#define STABS_DEBUG \
.stab 0 : { *(.stab) } \
.stabstr 0 : { *(.stabstr) } \
.stab.excl 0 : { *(.stab.excl) } \
.stab.exclstr 0 : { *(.stab.exclstr) } \
.stab.index 0 : { *(.stab.index) } \
.stab.indexstr 0 : { *(.stab.indexstr) } \
.comment 0 : { *(.comment) }
#ifdef CONFIG_GENERIC_BUG
#define BUG_TABLE \
. = ALIGN(8); \
__bug_table : AT(ADDR(__bug_table) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__start___bug_table) = .; \
*(__bug_table) \
VMLINUX_SYMBOL(__stop___bug_table) = .; \
}
#else
#define BUG_TABLE
#endif
#ifdef CONFIG_PM_TRACE
#define TRACEDATA \
. = ALIGN(4); \
.tracedata : AT(ADDR(.tracedata) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__tracedata_start) = .; \
*(.tracedata) \
VMLINUX_SYMBOL(__tracedata_end) = .; \
}
#else
#define TRACEDATA
#endif
#define NOTES \
.notes : AT(ADDR(.notes) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__start_notes) = .; \
*(.note.*) \
VMLINUX_SYMBOL(__stop_notes) = .; \
}
#define INIT_SETUP(initsetup_align) \
. = ALIGN(initsetup_align); \
VMLINUX_SYMBOL(__setup_start) = .; \
*(.init.setup) \
VMLINUX_SYMBOL(__setup_end) = .;
#define INIT_CALLS_LEVEL(level) \
VMLINUX_SYMBOL(__initcall##level##_start) = .; \
*(.initcall##level##.init) \
*(.initcall##level##s.init) \
#define INIT_CALLS \
VMLINUX_SYMBOL(__initcall_start) = .; \
*(.initcallearly.init) \
INIT_CALLS_LEVEL(0) \
INIT_CALLS_LEVEL(1) \
INIT_CALLS_LEVEL(2) \
INIT_CALLS_LEVEL(3) \
INIT_CALLS_LEVEL(4) \
INIT_CALLS_LEVEL(5) \
INIT_CALLS_LEVEL(rootfs) \
INIT_CALLS_LEVEL(6) \
INIT_CALLS_LEVEL(7) \
VMLINUX_SYMBOL(__initcall_end) = .;
#define CON_INITCALL \
VMLINUX_SYMBOL(__con_initcall_start) = .; \
*(.con_initcall.init) \
VMLINUX_SYMBOL(__con_initcall_end) = .;
#define SECURITY_INITCALL \
VMLINUX_SYMBOL(__security_initcall_start) = .; \
*(.security_initcall.init) \
VMLINUX_SYMBOL(__security_initcall_end) = .;
#ifdef CONFIG_BLK_DEV_INITRD
#define INIT_RAM_FS \
. = ALIGN(4); \
VMLINUX_SYMBOL(__initramfs_start) = .; \
*(.init.ramfs) \
. = ALIGN(8); \
*(.init.ramfs.info)
#else
#define INIT_RAM_FS
#endif
/*
* Default discarded sections.
*
* Some archs want to discard exit text/data at runtime rather than
* link time due to cross-section references such as alt instructions,
* bug table, eh_frame, etc. DISCARDS must be the last of output
* section definitions so that such archs put those in earlier section
* definitions.
*/
#define DISCARDS \
/DISCARD/ : { \
EXIT_TEXT \
EXIT_DATA \
EXIT_CALL \
*(.discard) \
*(.discard.*) \
}
/**
* PERCPU_INPUT - the percpu input sections
* @cacheline: cacheline size
*
* The core percpu section names and core symbols which do not rely
* directly upon load addresses.
*
* @cacheline is used to align subsections to avoid false cacheline
* sharing between subsections for different purposes.
*/
#define PERCPU_INPUT(cacheline) \
VMLINUX_SYMBOL(__per_cpu_start) = .; \
*(.data..percpu..first) \
. = ALIGN(PAGE_SIZE); \
*(.data..percpu..page_aligned) \
. = ALIGN(cacheline); \
*(.data..percpu..readmostly) \
. = ALIGN(cacheline); \
*(.data..percpu) \
*(.data..percpu..shared_aligned) \
VMLINUX_SYMBOL(__per_cpu_end) = .;
/**
* PERCPU_VADDR - define output section for percpu area
* @cacheline: cacheline size
* @vaddr: explicit base address (optional)
* @phdr: destination PHDR (optional)
*
* Macro which expands to output section for percpu area.
*
* @cacheline is used to align subsections to avoid false cacheline
* sharing between subsections for different purposes.
*
* If @vaddr is not blank, it specifies explicit base address and all
* percpu symbols will be offset from the given address. If blank,
* @vaddr always equals @laddr + LOAD_OFFSET.
*
* @phdr defines the output PHDR to use if not blank. Be warned that
* output PHDR is sticky. If @phdr is specified, the next output
* section in the linker script will go there too. @phdr should have
* a leading colon.
*
* Note that this macros defines __per_cpu_load as an absolute symbol.
* If there is no need to put the percpu section at a predetermined
* address, use PERCPU_SECTION.
*/
#define PERCPU_VADDR(cacheline, vaddr, phdr) \
VMLINUX_SYMBOL(__per_cpu_load) = .; \
.data..percpu vaddr : AT(VMLINUX_SYMBOL(__per_cpu_load) \
- LOAD_OFFSET) { \
PERCPU_INPUT(cacheline) \
} phdr \
. = VMLINUX_SYMBOL(__per_cpu_load) + SIZEOF(.data..percpu);
/**
* PERCPU_SECTION - define output section for percpu area, simple version
* @cacheline: cacheline size
*
* Align to PAGE_SIZE and outputs output section for percpu area. This
* macro doesn't manipulate @vaddr or @phdr and __per_cpu_load and
* __per_cpu_start will be identical.
*
* This macro is equivalent to ALIGN(PAGE_SIZE); PERCPU_VADDR(@cacheline,,)
* except that __per_cpu_load is defined as a relative symbol against
* .data..percpu which is required for relocatable x86_32 configuration.
*/
#define PERCPU_SECTION(cacheline) \
. = ALIGN(PAGE_SIZE); \
.data..percpu : AT(ADDR(.data..percpu) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__per_cpu_load) = .; \
PERCPU_INPUT(cacheline) \
}
/*
* Definition of the high level *_SECTION macros
* They will fit only a subset of the architectures
*/
/*
* Writeable data.
* All sections are combined in a single .data section.
* The sections following CONSTRUCTORS are arranged so their
* typical alignment matches.
* A cacheline is typical/always less than a PAGE_SIZE so
* the sections that has this restriction (or similar)
* is located before the ones requiring PAGE_SIZE alignment.
* NOSAVE_DATA starts and ends with a PAGE_SIZE alignment which
* matches the requirement of PAGE_ALIGNED_DATA.
*
* use 0 as page_align if page_aligned data is not used */
#define RW_DATA_SECTION(cacheline, pagealigned, inittask) \
. = ALIGN(PAGE_SIZE); \
.data : AT(ADDR(.data) - LOAD_OFFSET) { \
INIT_TASK_DATA(inittask) \
NOSAVE_DATA \
PAGE_ALIGNED_DATA(pagealigned) \
CACHELINE_ALIGNED_DATA(cacheline) \
READ_MOSTLY_DATA(cacheline) \
DATA_DATA \
CONSTRUCTORS \
}
#define INIT_TEXT_SECTION(inittext_align) \
. = ALIGN(inittext_align); \
.init.text : AT(ADDR(.init.text) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(_sinittext) = .; \
INIT_TEXT \
VMLINUX_SYMBOL(_einittext) = .; \
}
#define INIT_DATA_SECTION(initsetup_align) \
.init.data : AT(ADDR(.init.data) - LOAD_OFFSET) { \
INIT_DATA \
INIT_SETUP(initsetup_align) \
INIT_CALLS \
CON_INITCALL \
SECURITY_INITCALL \
INIT_RAM_FS \
}
#define BSS_SECTION(sbss_align, bss_align, stop_align) \
. = ALIGN(sbss_align); \
VMLINUX_SYMBOL(__bss_start) = .; \
SBSS(sbss_align) \
BSS(bss_align) \
. = ALIGN(stop_align); \
VMLINUX_SYMBOL(__bss_stop) = .;
View Git Blame Copy Permalink