kevin/linux
1
Fork 0
Code
7b5dea1234
linux/arch/arm/mach-pxa
History
Russell King 7b5dea1234 [ARM] pxa: Add PXA3 standby code hooked into the IRQ wake scheme 
Wakeup sources on PXA3 are enabled at two levels.  First, the MFP
configuration has to be set to enable which edges a specific pin
will trigger a wakeup.  The pin also has to be routed to a functional
unit.  Lastly, the functional unit must be enabled as a wakeup source
in the appropriate AD*ER registers (AD2D0ER for standby resume.)

This doesn't fit well with the IRQ wake scheme - we currently do a
best effort conversion from IRQ numbers to functional unit wake enable
bits.  For instance, there's several USB client related enable bits but
there's no corresponding IRQs to determine which you'd want.  Conversely,
there's a single enable bit covering several functional units.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-26 15:07:56 +00:00
..
akita-ioexp.c
clock.c [ARM] pxa: introduce clk support for PXA SoC clocks 2007-10-12 21:14:55 +01:00
clock.h [ARM] pxa: introduce clk support for PXA SoC clocks 2007-10-12 21:14:55 +01:00
cm-x270-pci.c [ARM] 4667/1: CM-X270 fixes 2007-12-08 14:35:43 +00:00
cm-x270-pci.h [ARM] 4576/1: CM-X270 machine support 2007-10-15 18:53:57 +01:00
cm-x270.c Driver core: change sysdev classes to use dynamic kobject names 2008-01-24 20:40:40 -08:00
corgi_lcd.c
corgi_pm.c
corgi_ssp.c [ARM] pxa: move SSP register definitions from pxa-regs.h to regs-ssp.h 2008-01-26 15:07:51 +00:00
corgi.c backlight: Convert corgi backlight driver into a more generic driver 2007-10-11 22:24:13 +01:00
cpu-pxa.c [ARM] pxa: move memory controller registers into pxa2xx-regs.h 2008-01-26 15:07:54 +00:00
devices.c [ARM] pxa: move pxa27x_device_ohci out of pxa27x.c for use with pxa3xx 2008-01-26 15:07:54 +00:00
devices.h [ARM] pxa: mmc: add 3rd host controller support for pxa310 2008-01-26 15:07:53 +00:00
dma.c [ARM] 4451/1: pxa: make dma.c generic and remove cpu specific dma code 2007-07-12 14:28:16 +01:00
em-x270.c [ARM] 4475/2: EM-x270 board support 2007-07-20 17:45:15 +01:00
generic.c [ARM] pxa: increase size of memory mapping 2008-01-26 15:07:54 +00:00
generic.h [ARM] pxa: PXA3xx base support 2007-10-15 18:53:43 +01:00
idp.c [ARM] pxa: move platform devices to separate header file 2007-07-12 14:28:21 +01:00
irq.c [ARM] pxa: PXA3xx base support 2007-10-15 18:53:43 +01:00
Kconfig [ARM] 4576/1: CM-X270 machine support 2007-10-15 18:53:57 +01:00
leds-idp.c
leds-lubbock.c
leds-mainstone.c
leds-trizeps4.c
leds.c
leds.h
lpd270.c [ARM] pxa: move memory controller registers into pxa2xx-regs.h 2008-01-26 15:07:54 +00:00
lubbock.c [ARM] pxa: move memory controller registers into pxa2xx-regs.h 2008-01-26 15:07:54 +00:00
mainstone.c [ARM] pxa: move memory controller registers into pxa2xx-regs.h 2008-01-26 15:07:54 +00:00
Makefile [ARM] pxa: omit PXA25x or PXA27x standby/sleep code as appropriate 2008-01-26 15:07:56 +00:00
Makefile.boot
mfp.c [ARM] pxa: program MFPs for low power mode when suspending 2008-01-26 15:07:56 +00:00
pm.c PM: Rename struct pm_ops and related things 2007-10-18 14:37:18 -07:00
poodle.c [ARM] pxa: move platform devices to separate header file 2007-07-12 14:28:21 +01:00
pxa3xx.c [ARM] pxa: Add PXA3 standby code hooked into the IRQ wake scheme 2008-01-26 15:07:56 +00:00
pxa25x.c [ARM] pxa: clean up pxa{27x,25x}_init_pm() to empty if CONFIG_PM not defined 2008-01-26 15:07:54 +00:00
pxa27x.c [ARM] pxa: clean up pxa{27x,25x}_init_pm() to empty if CONFIG_PM not defined 2008-01-26 15:07:54 +00:00
pxa300.c [ARM] 4635/1: pxa: Change Eric Miao's email address to eric.miao@marvell.com 2007-10-31 15:21:48 +00:00
pxa320.c [ARM] 4675/1: pxa: fix mfp address definition error for pxa320 2007-11-29 20:52:54 +00:00
sharpsl_pm.c
sharpsl.h
sleep.S [ARM] pxa: omit PXA25x or PXA27x standby/sleep code as appropriate 2008-01-26 15:07:56 +00:00
spitz_pm.c
spitz.c backlight: Convert corgi backlight driver into a more generic driver 2007-10-11 22:24:13 +01:00
ssp.c [ARM] pxa: ensure SSP TX FIFO is empty instead of not full for pxa3xx 2008-01-26 15:07:53 +00:00
standby.S [ARM] pxa: Add PXA3 standby code hooked into the IRQ wake scheme 2008-01-26 15:07:56 +00:00
time.c [ARM] pxa: Don't wind OSCR backwards over suspend/resume 2008-01-26 15:07:51 +00:00
tosa.c [ARM] pxa: move platform devices to separate header file 2007-07-12 14:28:21 +01:00
trizeps4.c [ARM] pxa: move platform devices to separate header file 2007-07-12 14:28:21 +01:00
zylonite_pxa300.c [ARM] pxa: Add zylonite MFP wakeup configurations 2008-01-26 15:07:56 +00:00
zylonite_pxa320.c [ARM] pxa: Add zylonite MFP wakeup configurations 2008-01-26 15:07:56 +00:00
zylonite.c [ARM] pxa: mmc: add 3rd host controller support for pxa310 2008-01-26 15:07:53 +00:00