1
linux/arch/arm/mach-omap2/mcbsp.c
Eduardo Valentin 78673bc898 ARM: OMAP: McBSP: Add support for mcbsp on mach-omap2
This patch adds support for mach-omap2 based on current
mcbsp platform driver.

Signed-off-by: Eduardo Valentin <eduardo.valentin@indt.org.br>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-07-03 12:24:40 +03:00

209 lines
5.1 KiB
C

/*
* linux/arch/arm/mach-omap2/mcbsp.c
*
* Copyright (C) 2008 Instituto Nokia de Tecnologia
* Contact: Eduardo Valentin <eduardo.valentin@indt.org.br>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Multichannel mode not supported.
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/platform_device.h>
#include <asm/arch/dma.h>
#include <asm/arch/mux.h>
#include <asm/arch/cpu.h>
#include <asm/arch/mcbsp.h>
struct mcbsp_internal_clk {
struct clk clk;
struct clk **childs;
int n_childs;
};
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
static void omap_mcbsp_clk_init(struct mcbsp_internal_clk *mclk)
{
const char *clk_names[] = { "mcbsp_ick", "mcbsp_fck" };
int i;
mclk->n_childs = ARRAY_SIZE(clk_names);
mclk->childs = kzalloc(mclk->n_childs * sizeof(struct clk *),
GFP_KERNEL);
for (i = 0; i < mclk->n_childs; i++) {
/* We fake a platform device to get correct device id */
struct platform_device pdev;
pdev.dev.bus = &platform_bus_type;
pdev.id = mclk->clk.id;
mclk->childs[i] = clk_get(&pdev.dev, clk_names[i]);
if (IS_ERR(mclk->childs[i]))
printk(KERN_ERR "Could not get clock %s (%d).\n",
clk_names[i], mclk->clk.id);
}
}
static int omap_mcbsp_clk_enable(struct clk *clk)
{
struct mcbsp_internal_clk *mclk = container_of(clk,
struct mcbsp_internal_clk, clk);
int i;
for (i = 0; i < mclk->n_childs; i++)
clk_enable(mclk->childs[i]);
return 0;
}
static void omap_mcbsp_clk_disable(struct clk *clk)
{
struct mcbsp_internal_clk *mclk = container_of(clk,
struct mcbsp_internal_clk, clk);
int i;
for (i = 0; i < mclk->n_childs; i++)
clk_disable(mclk->childs[i]);
}
static struct mcbsp_internal_clk omap_mcbsp_clks[] = {
{
.clk = {
.name = "mcbsp_clk",
.id = 1,
.enable = omap_mcbsp_clk_enable,
.disable = omap_mcbsp_clk_disable,
},
},
{
.clk = {
.name = "mcbsp_clk",
.id = 2,
.enable = omap_mcbsp_clk_enable,
.disable = omap_mcbsp_clk_disable,
},
},
};
#define omap_mcbsp_clks_size ARRAY_SIZE(omap_mcbsp_clks)
#else
#define omap_mcbsp_clks_size 0
static struct mcbsp_internal_clk __initdata *omap_mcbsp_clks;
static inline void omap_mcbsp_clk_init(struct clk *clk)
{ }
#endif
static void omap2_mcbsp2_mux_setup(void)
{
omap_cfg_reg(Y15_24XX_MCBSP2_CLKX);
omap_cfg_reg(R14_24XX_MCBSP2_FSX);
omap_cfg_reg(W15_24XX_MCBSP2_DR);
omap_cfg_reg(V15_24XX_MCBSP2_DX);
omap_cfg_reg(V14_24XX_GPIO117);
/*
* TODO: Need to add MUX settings for OMAP 2430 SDP
*/
}
static void omap2_mcbsp_request(unsigned int id)
{
if (cpu_is_omap2420() && (id == OMAP_MCBSP2))
omap2_mcbsp2_mux_setup();
}
static int omap2_mcbsp_check(unsigned int id)
{
if (id > OMAP_MAX_MCBSP_COUNT - 1) {
printk(KERN_ERR "OMAP-McBSP: McBSP%d doesn't exist\n", id + 1);
return -ENODEV;
}
return 0;
}
static struct omap_mcbsp_ops omap2_mcbsp_ops = {
.request = omap2_mcbsp_request,
.check = omap2_mcbsp_check,
};
#ifdef CONFIG_ARCH_OMAP24XX
static struct omap_mcbsp_platform_data omap24xx_mcbsp_pdata[] = {
{
.virt_base = IO_ADDRESS(OMAP24XX_MCBSP1_BASE),
.dma_rx_sync = OMAP24XX_DMA_MCBSP1_RX,
.dma_tx_sync = OMAP24XX_DMA_MCBSP1_TX,
.rx_irq = INT_24XX_MCBSP1_IRQ_RX,
.tx_irq = INT_24XX_MCBSP1_IRQ_TX,
.ops = &omap2_mcbsp_ops,
.clk_name = "mcbsp_clk",
},
{
.virt_base = IO_ADDRESS(OMAP24XX_MCBSP2_BASE),
.dma_rx_sync = OMAP24XX_DMA_MCBSP2_RX,
.dma_tx_sync = OMAP24XX_DMA_MCBSP2_TX,
.rx_irq = INT_24XX_MCBSP2_IRQ_RX,
.tx_irq = INT_24XX_MCBSP2_IRQ_TX,
.ops = &omap2_mcbsp_ops,
.clk_name = "mcbsp_clk",
},
};
#define OMAP24XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap24xx_mcbsp_pdata)
#else
#define omap24xx_mcbsp_pdata NULL
#define OMAP24XX_MCBSP_PDATA_SZ 0
#endif
#ifdef CONFIG_ARCH_OMAP34XX
static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
{
.virt_base = IO_ADDRESS(OMAP34XX_MCBSP1_BASE),
.dma_rx_sync = OMAP24XX_DMA_MCBSP1_RX,
.dma_tx_sync = OMAP24XX_DMA_MCBSP1_TX,
.rx_irq = INT_24XX_MCBSP1_IRQ_RX,
.tx_irq = INT_24XX_MCBSP1_IRQ_TX,
.ops = &omap2_mcbsp_ops,
.clk_name = "mcbsp_clk",
},
{
.virt_base = IO_ADDRESS(OMAP34XX_MCBSP2_BASE),
.dma_rx_sync = OMAP24XX_DMA_MCBSP2_RX,
.dma_tx_sync = OMAP24XX_DMA_MCBSP2_TX,
.rx_irq = INT_24XX_MCBSP2_IRQ_RX,
.tx_irq = INT_24XX_MCBSP2_IRQ_TX,
.ops = &omap2_mcbsp_ops,
.clk_name = "mcbsp_clk",
},
};
#define OMAP34XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap34xx_mcbsp_pdata)
#else
#define omap34xx_mcbsp_pdata NULL
#define OMAP34XX_MCBSP_PDATA_SZ 0
#endif
int __init omap2_mcbsp_init(void)
{
int i;
for (i = 0; i < omap_mcbsp_clks_size; i++) {
/* Once we call clk_get inside init, we do not register it */
omap_mcbsp_clk_init(&omap_mcbsp_clks[i]);
clk_register(&omap_mcbsp_clks[i].clk);
}
if (cpu_is_omap24xx())
omap_mcbsp_register_board_cfg(omap24xx_mcbsp_pdata,
OMAP24XX_MCBSP_PDATA_SZ);
if (cpu_is_omap34xx())
omap_mcbsp_register_board_cfg(omap34xx_mcbsp_pdata,
OMAP34XX_MCBSP_PDATA_SZ);
return omap_mcbsp_init();
}
arch_initcall(omap2_mcbsp_init);