1
linux/drivers/watchdog/rzn1_wdt.c
Christophe JAILLET a42912ac40 watchdog: rzn1: Use devm_clk_get_enabled() helper
The devm_clk_get_enabled() helper:
   - calls devm_clk_get()
   - calls clk_prepare_enable() and registers what is needed in order to
     call clk_disable_unprepare() when needed, as a managed resource.

This simplifies the code and avoids the need of a dedicated function used
with devm_add_action_or_reset().

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/b1f8b5453791035ad534bd5ed36b49798ff4d9b2.1672418166.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2023-02-12 15:32:52 +01:00

188 lines
4.7 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Renesas RZ/N1 Watchdog timer.
* This is a 12-bit timer driver from a (62.5/16384) MHz clock. It can't even
* cope with 2 seconds.
*
* Copyright 2018 Renesas Electronics Europe Ltd.
*
* Derived from Ralink RT288x watchdog timer.
*/
#include <linux/clk.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/platform_device.h>
#include <linux/reboot.h>
#include <linux/watchdog.h>
#define DEFAULT_TIMEOUT 60
#define RZN1_WDT_RETRIGGER 0x0
#define RZN1_WDT_RETRIGGER_RELOAD_VAL 0
#define RZN1_WDT_RETRIGGER_RELOAD_VAL_MASK 0xfff
#define RZN1_WDT_RETRIGGER_PRESCALE BIT(12)
#define RZN1_WDT_RETRIGGER_ENABLE BIT(13)
#define RZN1_WDT_RETRIGGER_WDSI (0x2 << 14)
#define RZN1_WDT_PRESCALER 16384
#define RZN1_WDT_MAX 4095
struct rzn1_watchdog {
struct watchdog_device wdtdev;
void __iomem *base;
unsigned long clk_rate_khz;
};
static inline uint32_t max_heart_beat_ms(unsigned long clk_rate_khz)
{
return (RZN1_WDT_MAX * RZN1_WDT_PRESCALER) / clk_rate_khz;
}
static inline uint32_t compute_reload_value(uint32_t tick_ms,
unsigned long clk_rate_khz)
{
return (tick_ms * clk_rate_khz) / RZN1_WDT_PRESCALER;
}
static int rzn1_wdt_ping(struct watchdog_device *w)
{
struct rzn1_watchdog *wdt = watchdog_get_drvdata(w);
/* Any value retrigggers the watchdog */
writel(0, wdt->base + RZN1_WDT_RETRIGGER);
return 0;
}
static int rzn1_wdt_start(struct watchdog_device *w)
{
struct rzn1_watchdog *wdt = watchdog_get_drvdata(w);
u32 val;
/*
* The hardware allows you to write to this reg only once.
* Since this includes the reload value, there is no way to change the
* timeout once started. Also note that the WDT clock is half the bus
* fabric clock rate, so if the bus fabric clock rate is changed after
* the WDT is started, the WDT interval will be wrong.
*/
val = RZN1_WDT_RETRIGGER_WDSI;
val |= RZN1_WDT_RETRIGGER_ENABLE;
val |= RZN1_WDT_RETRIGGER_PRESCALE;
val |= compute_reload_value(w->max_hw_heartbeat_ms, wdt->clk_rate_khz);
writel(val, wdt->base + RZN1_WDT_RETRIGGER);
return 0;
}
static irqreturn_t rzn1_wdt_irq(int irq, void *_wdt)
{
pr_crit("RZN1 Watchdog. Initiating system reboot\n");
emergency_restart();
return IRQ_HANDLED;
}
static struct watchdog_info rzn1_wdt_info = {
.identity = "RZ/N1 Watchdog",
.options = WDIOF_MAGICCLOSE | WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
};
static const struct watchdog_ops rzn1_wdt_ops = {
.owner = THIS_MODULE,
.start = rzn1_wdt_start,
.ping = rzn1_wdt_ping,
};
static int rzn1_wdt_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct rzn1_watchdog *wdt;
struct device_node *np = dev->of_node;
struct clk *clk;
unsigned long clk_rate;
int ret;
int irq;
wdt = devm_kzalloc(dev, sizeof(*wdt), GFP_KERNEL);
if (!wdt)
return -ENOMEM;
wdt->base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(wdt->base))
return PTR_ERR(wdt->base);
irq = platform_get_irq(pdev, 0);
if (irq < 0)
return irq;
ret = devm_request_irq(dev, irq, rzn1_wdt_irq, 0,
np->name, wdt);
if (ret) {
dev_err(dev, "failed to request irq %d\n", irq);
return ret;
}
clk = devm_clk_get_enabled(dev, NULL);
if (IS_ERR(clk)) {
dev_err(dev, "failed to get the clock\n");
return PTR_ERR(clk);
}
clk_rate = clk_get_rate(clk);
if (!clk_rate) {
dev_err(dev, "failed to get the clock rate\n");
return -EINVAL;
}
wdt->clk_rate_khz = clk_rate / 1000;
wdt->wdtdev.info = &rzn1_wdt_info,
wdt->wdtdev.ops = &rzn1_wdt_ops,
wdt->wdtdev.status = WATCHDOG_NOWAYOUT_INIT_STATUS,
wdt->wdtdev.parent = dev;
/*
* The period of the watchdog cannot be changed once set
* and is limited to a very short period.
* Configure it for a 1s period once and for all, and
* rely on the heart-beat provided by the watchdog core
* to make this usable by the user-space.
*/
wdt->wdtdev.max_hw_heartbeat_ms = max_heart_beat_ms(wdt->clk_rate_khz);
if (wdt->wdtdev.max_hw_heartbeat_ms > 1000)
wdt->wdtdev.max_hw_heartbeat_ms = 1000;
wdt->wdtdev.timeout = DEFAULT_TIMEOUT;
ret = watchdog_init_timeout(&wdt->wdtdev, 0, dev);
if (ret)
return ret;
watchdog_set_drvdata(&wdt->wdtdev, wdt);
return devm_watchdog_register_device(dev, &wdt->wdtdev);
}
static const struct of_device_id rzn1_wdt_match[] = {
{ .compatible = "renesas,rzn1-wdt" },
{},
};
MODULE_DEVICE_TABLE(of, rzn1_wdt_match);
static struct platform_driver rzn1_wdt_driver = {
.probe = rzn1_wdt_probe,
.driver = {
.name = KBUILD_MODNAME,
.of_match_table = rzn1_wdt_match,
},
};
module_platform_driver(rzn1_wdt_driver);
MODULE_DESCRIPTION("Renesas RZ/N1 hardware watchdog");
MODULE_AUTHOR("Phil Edworthy <phil.edworthy@renesas.com>");
MODULE_LICENSE("GPL");