kevin/linux
1
Fork 0
Code
77640aabd7
linux/arch/arm/mach-omap1/board-htcherald.c
Varadarajan, Charulatha 77640aabd7 OMAP: GPIO: Implement GPIO as a platform device 
Implement GPIO as a platform device.

GPIO APIs are used in machine_init functions. Hence it is
required to complete GPIO probe before board_init. Therefore
GPIO device register and driver register are implemented as
postcore_initcalls.

omap_gpio_init() does nothing now and this function would be
removed in the next patch as it's usage is spread across most
of the board files.

Inorder to convert GPIO as platform device, modifications are
required in clockxxxx_data.c file for OMAP1 so that device names
can be used to obtain clock instead of getting clocks by
name/NULL ptr.

Use runtime pm APIs (pm_runtime_put*/pm_runtime_get*) for enabling
or disabling the clocks, modify sysconfig settings and remove usage
of clock FW APIs.
Note 1: Converting GPIO driver to use runtime PM APIs is not done as a
separate patch because GPIO clock names are different for various OMAPs
and are different for some of the banks in the same CPU. This would need
usage of cpu_is checks and bank id checks while using clock FW APIs in
the gpio driver. Hence while making GPIO a platform driver framework,
PM runtime APIs are used directly.

Note 2: While implementing GPIO as a platform device, pm runtime APIs
are used as mentioned above and modification is not done in gpio's
prepare for idle/ resume after idle functions. This would be done
in the next patch series and GPIO driver would be made to use dev_pm_ops
instead of sysdev_class in that series only.

Due to the above, the GPIO driver implicitly relies on
CM_AUTOIDLE = 1 on its iclk for power management to work, since the
driver never disables its iclk.
This would be taken care in the next patch series (see Note 3 below).

Refer to
http://www.mail-archive.com/linux-omap@vger.kernel.org/msg39112.html
for more details.

Note 3: only pm_runtime_get_sync is called in gpio's probe() and
pm_runtime_put* is never called. This is to make the implementation
similar to the existing GPIO code. Another patch series would be sent
to correct this.

In OMAP3 and OMAP4 gpio's debounce clocks are optional clocks. They
are enabled/ disabled whenever required using clock framework APIs

TODO:
1. Cleanup the GPIO driver. Use function pointers and register
offest pointers instead of using hardcoded values
2. Remove all cpu_is_ checks and OMAP specific macros
3. Remove usage of gpio_bank array so that only
   instance specific information is used in driver code
4. Rename 'method'/ avoid it's usage
5. Fix the non-wakeup gpios handling for OMAP2430, OMAP3 & OMAP4
6. Modify gpio's prepare for idle/ resume after idle functions
   to use runtime pm implentation.

Signed-off-by: Charulatha V <charu@ti.com>
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Reviewed-by: Basak, Partha <p-basak2@ti.com>
Acked-by: Kevin Hilman <khilman@deeprootsystems.com>
[tony@atomide.com: updated for bank specific revision and updated boards]
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-07 16:26:57 -08:00

617 lines
17 KiB
C
Raw Blame History

/*
* HTC Herald board configuration
* Copyright (C) 2009 Cory Maccarrone <darkstar6262@gmail.com>
* Copyright (C) 2009 Wing Linux
*
* Based on the board-htcwizard.c file from the linwizard project:
* Copyright (C) 2006 Unai Uribarri
* Copyright (C) 2008 linwizard.sourceforge.net
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
* 02110-1301, USA.
*
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/input.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/gpio_keys.h>
#include <linux/i2c.h>
#include <linux/i2c-gpio.h>
#include <linux/htcpld.h>
#include <linux/leds.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <plat/omap7xx.h>
#include <plat/common.h>
#include <plat/board.h>
#include <plat/keypad.h>
#include <plat/usb.h>
#include <plat/mmc.h>
#include <mach/irqs.h>
#include <linux/delay.h>
/* LCD register definition */
#define OMAP_LCDC_CONTROL (0xfffec000 + 0x00)
#define OMAP_LCDC_STATUS (0xfffec000 + 0x10)
#define OMAP_DMA_LCD_CCR (0xfffee300 + 0xc2)
#define OMAP_DMA_LCD_CTRL (0xfffee300 + 0xc4)
#define OMAP_LCDC_CTRL_LCD_EN (1 << 0)
#define OMAP_LCDC_STAT_DONE (1 << 0)
/* GPIO definitions for the power button and keyboard slide switch */
#define HTCHERALD_GPIO_POWER 139
#define HTCHERALD_GPIO_SLIDE 174
#define HTCHERALD_GIRQ_BTNS 141
/* GPIO definitions for the touchscreen */
#define HTCHERALD_GPIO_TS 76
/* HTCPLD definitions */
/*
* CPLD Logic
*
* Chip 3 - 0x03
*
* Function 7 6 5 4 3 2 1 0
* ------------------------------------
* DPAD light x x x x x x x 1
* SoundDev x x x x 1 x x x
* Screen white 1 x x x x x x x
* MMC power on x x x x x 1 x x
* Happy times (n) 0 x x x x 1 x x
*
* Chip 4 - 0x04
*
* Function 7 6 5 4 3 2 1 0
* ------------------------------------
* Keyboard light x x x x x x x 1
* LCD Bright (4) x x x x x 1 1 x
* LCD Bright (3) x x x x x 0 1 x
* LCD Bright (2) x x x x x 1 0 x
* LCD Bright (1) x x x x x 0 0 x
* LCD Off x x x x 0 x x x
* LCD image (fb) 1 x x x x x x x
* LCD image (white) 0 x x x x x x x
* Caps lock LED x x 1 x x x x x
*
* Chip 5 - 0x05
*
* Function 7 6 5 4 3 2 1 0
* ------------------------------------
* Red (solid) x x x x x 1 x x
* Red (flash) x x x x x x 1 x
* Green (GSM flash) x x x x 1 x x x
* Green (GSM solid) x x x 1 x x x x
* Green (wifi flash) x x 1 x x x x x
* Blue (bt flash) x 1 x x x x x x
* DPAD Int Enable 1 x x x x x x 0
*
* (Combinations of the above can be made for different colors.)
* The direction pad interrupt enable must be set each time the
* interrupt is handled.
*
* Chip 6 - 0x06
*
* Function 7 6 5 4 3 2 1 0
* ------------------------------------
* Vibrator x x x x 1 x x x
* Alt LED x x x 1 x x x x
* Screen white 1 x x x x x x x
* Screen white x x 1 x x x x x
* Screen white x 0 x x x x x x
* Enable kbd dpad x x x x x x 0 x
* Happy Times 0 1 0 x x x 0 x
*/
/*
* HTCPLD GPIO lines start 16 after OMAP_MAX_GPIO_LINES to account
* for the 16 MPUIO lines.
*/
#define HTCPLD_GPIO_START_OFFSET (OMAP_MAX_GPIO_LINES + 16)
#define HTCPLD_IRQ(chip, offset) (OMAP_IRQ_END + 8 * (chip) + (offset))
#define HTCPLD_BASE(chip, offset) \
(HTCPLD_GPIO_START_OFFSET + 8 * (chip) + (offset))
#define HTCPLD_GPIO_LED_DPAD HTCPLD_BASE(0, 0)
#define HTCPLD_GPIO_LED_KBD HTCPLD_BASE(1, 0)
#define HTCPLD_GPIO_LED_CAPS HTCPLD_BASE(1, 5)
#define HTCPLD_GPIO_LED_RED_FLASH HTCPLD_BASE(2, 1)
#define HTCPLD_GPIO_LED_RED_SOLID HTCPLD_BASE(2, 2)
#define HTCPLD_GPIO_LED_GREEN_FLASH HTCPLD_BASE(2, 3)
#define HTCPLD_GPIO_LED_GREEN_SOLID HTCPLD_BASE(2, 4)
#define HTCPLD_GPIO_LED_WIFI HTCPLD_BASE(2, 5)
#define HTCPLD_GPIO_LED_BT HTCPLD_BASE(2, 6)
#define HTCPLD_GPIO_LED_VIBRATE HTCPLD_BASE(3, 3)
#define HTCPLD_GPIO_LED_ALT HTCPLD_BASE(3, 4)
#define HTCPLD_GPIO_RIGHT_KBD HTCPLD_BASE(6, 7)
#define HTCPLD_GPIO_UP_KBD HTCPLD_BASE(6, 6)
#define HTCPLD_GPIO_LEFT_KBD HTCPLD_BASE(6, 5)
#define HTCPLD_GPIO_DOWN_KBD HTCPLD_BASE(6, 4)
#define HTCPLD_GPIO_RIGHT_DPAD HTCPLD_BASE(7, 7)
#define HTCPLD_GPIO_UP_DPAD HTCPLD_BASE(7, 6)
#define HTCPLD_GPIO_LEFT_DPAD HTCPLD_BASE(7, 5)
#define HTCPLD_GPIO_DOWN_DPAD HTCPLD_BASE(7, 4)
#define HTCPLD_GPIO_ENTER_DPAD HTCPLD_BASE(7, 3)
/*
* The htcpld chip requires a gpio write to a specific line
* to re-enable interrupts after one has occurred.
*/
#define HTCPLD_GPIO_INT_RESET_HI HTCPLD_BASE(2, 7)
#define HTCPLD_GPIO_INT_RESET_LO HTCPLD_BASE(2, 0)
/* Chip 5 */
#define HTCPLD_IRQ_RIGHT_KBD HTCPLD_IRQ(0, 7)
#define HTCPLD_IRQ_UP_KBD HTCPLD_IRQ(0, 6)
#define HTCPLD_IRQ_LEFT_KBD HTCPLD_IRQ(0, 5)
#define HTCPLD_IRQ_DOWN_KBD HTCPLD_IRQ(0, 4)
/* Chip 6 */
#define HTCPLD_IRQ_RIGHT_DPAD HTCPLD_IRQ(1, 7)
#define HTCPLD_IRQ_UP_DPAD HTCPLD_IRQ(1, 6)
#define HTCPLD_IRQ_LEFT_DPAD HTCPLD_IRQ(1, 5)
#define HTCPLD_IRQ_DOWN_DPAD HTCPLD_IRQ(1, 4)
#define HTCPLD_IRQ_ENTER_DPAD HTCPLD_IRQ(1, 3)
/* Keyboard definition */
static int htc_herald_keymap[] = {
KEY(0, 0, KEY_RECORD), /* Mail button */
KEY(0, 1, KEY_CAMERA), /* Camera */
KEY(0, 2, KEY_PHONE), /* Send key */
KEY(0, 3, KEY_VOLUMEUP), /* Volume up */
KEY(0, 4, KEY_F2), /* Right bar (landscape) */
KEY(0, 5, KEY_MAIL), /* Win key (portrait) */
KEY(0, 6, KEY_DIRECTORY), /* Right bar (protrait) */
KEY(1, 0, KEY_LEFTCTRL), /* Windows key */
KEY(1, 1, KEY_COMMA),
KEY(1, 2, KEY_M),
KEY(1, 3, KEY_K),
KEY(1, 4, KEY_SLASH), /* OK key */
KEY(1, 5, KEY_I),
KEY(1, 6, KEY_U),
KEY(2, 0, KEY_LEFTALT),
KEY(2, 1, KEY_TAB),
KEY(2, 2, KEY_N),
KEY(2, 3, KEY_J),
KEY(2, 4, KEY_ENTER),
KEY(2, 5, KEY_H),
KEY(2, 6, KEY_Y),
KEY(3, 0, KEY_SPACE),
KEY(3, 1, KEY_L),
KEY(3, 2, KEY_B),
KEY(3, 3, KEY_V),
KEY(3, 4, KEY_BACKSPACE),
KEY(3, 5, KEY_G),
KEY(3, 6, KEY_T),
KEY(4, 0, KEY_CAPSLOCK), /* Shift */
KEY(4, 1, KEY_C),
KEY(4, 2, KEY_F),
KEY(4, 3, KEY_R),
KEY(4, 4, KEY_O),
KEY(4, 5, KEY_E),
KEY(4, 6, KEY_D),
KEY(5, 0, KEY_X),
KEY(5, 1, KEY_Z),
KEY(5, 2, KEY_S),
KEY(5, 3, KEY_W),
KEY(5, 4, KEY_P),
KEY(5, 5, KEY_Q),
KEY(5, 6, KEY_A),
KEY(6, 0, KEY_CONNECT), /* Voice button */
KEY(6, 2, KEY_CANCEL), /* End key */
KEY(6, 3, KEY_VOLUMEDOWN), /* Volume down */
KEY(6, 4, KEY_F1), /* Left bar (landscape) */
KEY(6, 5, KEY_WWW), /* OK button (portrait) */
KEY(6, 6, KEY_CALENDAR), /* Left bar (portrait) */
0
};
struct omap_kp_platform_data htcherald_kp_data = {
.rows = 7,
.cols = 7,
.delay = 20,
.rep = 1,
.keymap = htc_herald_keymap,
};
static struct resource kp_resources[] = {
[0] = {
.start = INT_7XX_MPUIO_KEYPAD,
.end = INT_7XX_MPUIO_KEYPAD,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device kp_device = {
.name = "omap-keypad",
.id = -1,
.dev = {
.platform_data = &htcherald_kp_data,
},
.num_resources = ARRAY_SIZE(kp_resources),
.resource = kp_resources,
};
/* GPIO buttons for keyboard slide and power button */
static struct gpio_keys_button herald_gpio_keys_table[] = {
{BTN_0, HTCHERALD_GPIO_POWER, 1, "POWER", EV_KEY, 1, 20},
{SW_LID, HTCHERALD_GPIO_SLIDE, 0, "SLIDE", EV_SW, 1, 20},
{KEY_LEFT, HTCPLD_GPIO_LEFT_KBD, 1, "LEFT", EV_KEY, 1, 20},
{KEY_RIGHT, HTCPLD_GPIO_RIGHT_KBD, 1, "RIGHT", EV_KEY, 1, 20},
{KEY_UP, HTCPLD_GPIO_UP_KBD, 1, "UP", EV_KEY, 1, 20},
{KEY_DOWN, HTCPLD_GPIO_DOWN_KBD, 1, "DOWN", EV_KEY, 1, 20},
{KEY_LEFT, HTCPLD_GPIO_LEFT_DPAD, 1, "DLEFT", EV_KEY, 1, 20},
{KEY_RIGHT, HTCPLD_GPIO_RIGHT_DPAD, 1, "DRIGHT", EV_KEY, 1, 20},
{KEY_UP, HTCPLD_GPIO_UP_DPAD, 1, "DUP", EV_KEY, 1, 20},
{KEY_DOWN, HTCPLD_GPIO_DOWN_DPAD, 1, "DDOWN", EV_KEY, 1, 20},
{KEY_ENTER, HTCPLD_GPIO_ENTER_DPAD, 1, "DENTER", EV_KEY, 1, 20},
};
static struct gpio_keys_platform_data herald_gpio_keys_data = {
.buttons = herald_gpio_keys_table,
.nbuttons = ARRAY_SIZE(herald_gpio_keys_table),
.rep = 1,
};
static struct platform_device herald_gpiokeys_device = {
.name = "gpio-keys",
.id = -1,
.dev = {
.platform_data = &herald_gpio_keys_data,
},
};
/* LEDs for the Herald. These connect to the HTCPLD GPIO device. */
static struct gpio_led gpio_leds[] = {
{"dpad", NULL, HTCPLD_GPIO_LED_DPAD, 0, 0, LEDS_GPIO_DEFSTATE_OFF},
{"kbd", NULL, HTCPLD_GPIO_LED_KBD, 0, 0, LEDS_GPIO_DEFSTATE_OFF},
{"vibrate", NULL, HTCPLD_GPIO_LED_VIBRATE, 0, 0, LEDS_GPIO_DEFSTATE_OFF},
{"green_solid", NULL, HTCPLD_GPIO_LED_GREEN_SOLID, 0, 0, LEDS_GPIO_DEFSTATE_OFF},
{"green_flash", NULL, HTCPLD_GPIO_LED_GREEN_FLASH, 0, 0, LEDS_GPIO_DEFSTATE_OFF},
{"red_solid", "mmc0", HTCPLD_GPIO_LED_RED_SOLID, 0, 0, LEDS_GPIO_DEFSTATE_OFF},
{"red_flash", NULL, HTCPLD_GPIO_LED_RED_FLASH, 0, 0, LEDS_GPIO_DEFSTATE_OFF},
{"wifi", NULL, HTCPLD_GPIO_LED_WIFI, 0, 0, LEDS_GPIO_DEFSTATE_OFF},
{"bt", NULL, HTCPLD_GPIO_LED_BT, 0, 0, LEDS_GPIO_DEFSTATE_OFF},
{"caps", NULL, HTCPLD_GPIO_LED_CAPS, 0, 0, LEDS_GPIO_DEFSTATE_OFF},
{"alt", NULL, HTCPLD_GPIO_LED_ALT, 0, 0, LEDS_GPIO_DEFSTATE_OFF},
};
static struct gpio_led_platform_data gpio_leds_data = {
.leds = gpio_leds,
.num_leds = ARRAY_SIZE(gpio_leds),
};
static struct platform_device gpio_leds_device = {
.name = "leds-gpio",
.id = 0,
.dev = {
.platform_data = &gpio_leds_data,
},
};
/* HTC PLD chips */
static struct resource htcpld_resources[] = {
[0] = {
.start = OMAP_GPIO_IRQ(HTCHERALD_GIRQ_BTNS),
.end = OMAP_GPIO_IRQ(HTCHERALD_GIRQ_BTNS),
.flags = IORESOURCE_IRQ,
},
};
struct htcpld_chip_platform_data htcpld_chips[] = {
[0] = {
.addr = 0x03,
.reset = 0x04,
.num_gpios = 8,
.gpio_out_base = HTCPLD_BASE(0, 0),
.gpio_in_base = HTCPLD_BASE(4, 0),
},
[1] = {
.addr = 0x04,
.reset = 0x8e,
.num_gpios = 8,
.gpio_out_base = HTCPLD_BASE(1, 0),
.gpio_in_base = HTCPLD_BASE(5, 0),
},
[2] = {
.addr = 0x05,
.reset = 0x80,
.num_gpios = 8,
.gpio_out_base = HTCPLD_BASE(2, 0),
.gpio_in_base = HTCPLD_BASE(6, 0),
.irq_base = HTCPLD_IRQ(0, 0),
.num_irqs = 8,
},
[3] = {
.addr = 0x06,
.reset = 0x40,
.num_gpios = 8,
.gpio_out_base = HTCPLD_BASE(3, 0),
.gpio_in_base = HTCPLD_BASE(7, 0),
.irq_base = HTCPLD_IRQ(1, 0),
.num_irqs = 8,
},
};
struct htcpld_core_platform_data htcpld_pfdata = {
.int_reset_gpio_hi = HTCPLD_GPIO_INT_RESET_HI,
.int_reset_gpio_lo = HTCPLD_GPIO_INT_RESET_LO,
.i2c_adapter_id = 1,
.chip = htcpld_chips,
.num_chip = ARRAY_SIZE(htcpld_chips),
};
static struct platform_device htcpld_device = {
.name = "i2c-htcpld",
.id = -1,
.resource = htcpld_resources,
.num_resources = ARRAY_SIZE(htcpld_resources),
.dev = {
.platform_data = &htcpld_pfdata,
},
};
/* USB Device */
static struct omap_usb_config htcherald_usb_config __initdata = {
.otg = 0,
.register_host = 0,
.register_dev = 1,
.hmc_mode = 4,
.pins[0] = 2,
};
/* LCD Device resources */
static struct omap_lcd_config htcherald_lcd_config __initdata = {
.ctrl_name = "internal",
};
static struct omap_board_config_kernel htcherald_config[] __initdata = {
{ OMAP_TAG_LCD, &htcherald_lcd_config },
};
static struct platform_device lcd_device = {
.name = "lcd_htcherald",
.id = -1,
};
/* MMC Card */
#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
static struct omap_mmc_platform_data htc_mmc1_data = {
.nr_slots = 1,
.switch_slot = NULL,
.slots[0] = {
.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
.name = "mmcblk",
.nomux = 1,
.wires = 4,
.switch_pin = -1,
},
};
static struct omap_mmc_platform_data *htc_mmc_data[1];
#endif
/* Platform devices for the Herald */
static struct platform_device *devices[] __initdata = {
&kp_device,
&lcd_device,
&htcpld_device,
&gpio_leds_device,
&herald_gpiokeys_device,
};
/*
* Touchscreen
*/
static const struct ads7846_platform_data htcherald_ts_platform_data = {
.model = 7846,
.keep_vref_on = 1,
.x_plate_ohms = 496,
.gpio_pendown = HTCHERALD_GPIO_TS,
.pressure_max = 100000,
.pressure_min = 5000,
.x_min = 528,
.x_max = 3760,
.y_min = 624,
.y_max = 3760,
};
static struct spi_board_info __initdata htcherald_spi_board_info[] = {
{
.modalias = "ads7846",
.platform_data = &htcherald_ts_platform_data,
.irq = OMAP_GPIO_IRQ(HTCHERALD_GPIO_TS),
.max_speed_hz = 2500000,
.bus_num = 2,
.chip_select = 1,
}
};
/*
* Init functions from here on
*/
static void __init htcherald_lcd_init(void)
{
u32 reg;
unsigned int tries = 200;
/* disable controller if active */
reg = omap_readl(OMAP_LCDC_CONTROL);
if (reg & OMAP_LCDC_CTRL_LCD_EN) {
reg &= ~OMAP_LCDC_CTRL_LCD_EN;
omap_writel(reg, OMAP_LCDC_CONTROL);
/* wait for end of frame */
while (!(omap_readl(OMAP_LCDC_STATUS) & OMAP_LCDC_STAT_DONE)) {
tries--;
if (!tries)
break;
}
if (!tries)
printk(KERN_WARNING "Timeout waiting for end of frame "
"-- LCD may not be available\n");
/* turn off DMA */
reg = omap_readw(OMAP_DMA_LCD_CCR);
reg &= ~(1 << 7);
omap_writew(reg, OMAP_DMA_LCD_CCR);
reg = omap_readw(OMAP_DMA_LCD_CTRL);
reg &= ~(1 << 8);
omap_writew(reg, OMAP_DMA_LCD_CTRL);
}
}
static void __init htcherald_map_io(void)
{
omap1_map_common_io();
/*
* The LCD panel must be disabled and DMA turned off here, as doing
* it later causes the LCD never to reinitialize.
*/
htcherald_lcd_init();
printk(KERN_INFO "htcherald_map_io done.\n");
}
static void __init htcherald_disable_watchdog(void)
{
/* Disable watchdog if running */
if (omap_readl(OMAP_WDT_TIMER_MODE) & 0x8000) {
/*
* disable a potentially running watchdog timer before
* it kills us.
*/
printk(KERN_WARNING "OMAP850 Watchdog seems to be activated, disabling it for now.\n");
omap_writel(0xF5, OMAP_WDT_TIMER_MODE);
omap_writel(0xA0, OMAP_WDT_TIMER_MODE);
}
}
#define HTCHERALD_GPIO_USB_EN1 33
#define HTCHERALD_GPIO_USB_EN2 73
#define HTCHERALD_GPIO_USB_DM 35
#define HTCHERALD_GPIO_USB_DP 36
static void __init htcherald_usb_enable(void)
{
unsigned int tries = 20;
unsigned int value = 0;
/* Request the GPIOs we need to control here */
if (gpio_request(HTCHERALD_GPIO_USB_EN1, "herald_usb") < 0)
goto err1;
if (gpio_request(HTCHERALD_GPIO_USB_EN2, "herald_usb") < 0)
goto err2;
if (gpio_request(HTCHERALD_GPIO_USB_DM, "herald_usb") < 0)
goto err3;
if (gpio_request(HTCHERALD_GPIO_USB_DP, "herald_usb") < 0)
goto err4;
/* force USB_EN GPIO to 0 */
do {
/* output low */
gpio_direction_output(HTCHERALD_GPIO_USB_EN1, 0);
} while ((value = gpio_get_value(HTCHERALD_GPIO_USB_EN1)) == 1 &&
--tries);
if (value == 1)
printk(KERN_WARNING "Unable to reset USB, trying to continue\n");
gpio_direction_output(HTCHERALD_GPIO_USB_EN2, 0); /* output low */
gpio_direction_input(HTCHERALD_GPIO_USB_DM); /* input */
gpio_direction_input(HTCHERALD_GPIO_USB_DP); /* input */
goto done;
err4:
gpio_free(HTCHERALD_GPIO_USB_DM);
err3:
gpio_free(HTCHERALD_GPIO_USB_EN2);
err2:
gpio_free(HTCHERALD_GPIO_USB_EN1);
err1:
printk(KERN_ERR "Unabled to request GPIO for USB\n");
done:
printk(KERN_INFO "USB setup complete.\n");
}
static void __init htcherald_init(void)
{
printk(KERN_INFO "HTC Herald init.\n");
/* Do board initialization before we register all the devices */
omap_board_config = htcherald_config;
omap_board_config_size = ARRAY_SIZE(htcherald_config);
platform_add_devices(devices, ARRAY_SIZE(devices));
htcherald_disable_watchdog();
htcherald_usb_enable();
omap1_usb_init(&htcherald_usb_config);
spi_register_board_info(htcherald_spi_board_info,
ARRAY_SIZE(htcherald_spi_board_info));
omap_register_i2c_bus(1, 100, NULL, 0);
#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
htc_mmc_data[0] = &htc_mmc1_data;
omap1_init_mmc(htc_mmc_data, 1);
#endif
}
static void __init htcherald_init_irq(void)
{
printk(KERN_INFO "htcherald_init_irq.\n");
omap1_init_common_hw();
omap_init_irq();
}
MACHINE_START(HERALD, "HTC Herald")
/* Maintainer: Cory Maccarrone <darkstar6262@gmail.com> */
/* Maintainer: wing-linux.sourceforge.net */
.boot_params = 0x10000100,
.map_io = htcherald_map_io,
.reserve = omap_reserve,
.init_irq = htcherald_init_irq,
.init_machine = htcherald_init,
.timer = &omap_timer,
MACHINE_END
View Git Blame Copy Permalink