1
linux/drivers/ide/legacy/falconide.c
Bartlomiej Zolnierkiewicz c413b9b94d ide: add struct ide_port_info instances to legacy host drivers
* Remove 'struct pci_dev *dev' argument from ide_hwif_setup_dma().

* Un-static ide_hwif_setup_dma() and add CONFIG_BLK_DEV_IDEDMA_PCI=n version.

* Add 'const struct ide_port_info *d' argument to ide_device_add[_all]().

* Factor out generic ports init from ide_pci_setup_ports() to ide_init_port(),
  move it to ide-probe.c and call it in in ide_device_add_all() instead of
  ide_pci_setup_ports().

* Move ->mate setup to ide_device_add_all() from ide_port_init().

* Add IDE_HFLAG_NO_AUTOTUNE host flag for host drivers that don't enable
  ->autotune currently.

* Setup hwif->chipset in ide_init_port() but iff pi->chipset is set
  (to not override setup done by ide_hwif_configure()).

* Add ETRAX host handling to ide_device_add_all().

* cmd640.c: set IDE_HFLAG_ABUSE_* also for CONFIG_BLK_DEV_CMD640_ENHANCED=n.

* pmac.c: make pmac_ide_setup_dma() return an error value and move DMA masks
  setup to pmac_ide_setup_device().

* Add 'struct ide_port_info' instances to legacy host drivers, pass them to
  ide_device_add() calls and then remove open-coded ports initialization.

Reviewed-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02 19:56:31 +01:00

94 lines
2.1 KiB
C

/*
* Atari Falcon IDE Driver
*
* Created 12 Jul 1997 by Geert Uytterhoeven
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive for
* more details.
*/
#include <linux/module.h>
#include <linux/types.h>
#include <linux/mm.h>
#include <linux/interrupt.h>
#include <linux/blkdev.h>
#include <linux/hdreg.h>
#include <linux/ide.h>
#include <linux/init.h>
#include <asm/setup.h>
#include <asm/atarihw.h>
#include <asm/atariints.h>
#include <asm/atari_stdma.h>
/*
* Base of the IDE interface
*/
#define ATA_HD_BASE 0xfff00000
/*
* Offsets from the above base
*/
#define ATA_HD_DATA 0x00
#define ATA_HD_ERROR 0x05 /* see err-bits */
#define ATA_HD_NSECTOR 0x09 /* nr of sectors to read/write */
#define ATA_HD_SECTOR 0x0d /* starting sector */
#define ATA_HD_LCYL 0x11 /* starting cylinder */
#define ATA_HD_HCYL 0x15 /* high byte of starting cyl */
#define ATA_HD_SELECT 0x19 /* 101dhhhh , d=drive, hhhh=head */
#define ATA_HD_STATUS 0x1d /* see status-bits */
#define ATA_HD_CONTROL 0x39
static int falconide_offsets[IDE_NR_PORTS] __initdata = {
ATA_HD_DATA, ATA_HD_ERROR, ATA_HD_NSECTOR, ATA_HD_SECTOR, ATA_HD_LCYL,
ATA_HD_HCYL, ATA_HD_SELECT, ATA_HD_STATUS, ATA_HD_CONTROL, -1
};
/*
* falconide_intr_lock is used to obtain access to the IDE interrupt,
* which is shared between several drivers.
*/
int falconide_intr_lock;
EXPORT_SYMBOL(falconide_intr_lock);
/*
* Probe for a Falcon IDE interface
*/
static int __init falconide_init(void)
{
if (MACH_IS_ATARI && ATARIHW_PRESENT(IDE)) {
hw_regs_t hw;
ide_hwif_t *hwif;
printk(KERN_INFO "ide: Falcon IDE controller\n");
ide_setup_ports(&hw, ATA_HD_BASE, falconide_offsets,
0, 0, NULL,
// falconide_iops,
IRQ_MFP_IDE);
hwif = ide_find_port(hw.io_ports[IDE_DATA_OFFSET]);
if (hwif) {
u8 index = hwif->index;
u8 idx[4] = { index, 0xff, 0xff, 0xff };
ide_init_port_data(hwif, index);
ide_init_port_hw(hwif, &hw);
ide_device_add(idx, NULL);
}
}
return 0;
}
module_init(falconide_init);