1
linux/net/sctp/associola.c
Linus Torvalds 73287a43cc Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:
 "Highlights (1721 non-merge commits, this has to be a record of some
  sort):

   1) Add 'random' mode to team driver, from Jiri Pirko and Eric
      Dumazet.

   2) Make it so that any driver that supports configuration of multiple
      MAC addresses can provide the forwarding database add and del
      calls by providing a default implementation and hooking that up if
      the driver doesn't have an explicit set of handlers.  From Vlad
      Yasevich.

   3) Support GSO segmentation over tunnels and other encapsulating
      devices such as VXLAN, from Pravin B Shelar.

   4) Support L2 GRE tunnels in the flow dissector, from Michael Dalton.

   5) Implement Tail Loss Probe (TLP) detection in TCP, from Nandita
      Dukkipati.

   6) In the PHY layer, allow supporting wake-on-lan in situations where
      the PHY registers have to be written for it to be configured.

      Use it to support wake-on-lan in mv643xx_eth.

      From Michael Stapelberg.

   7) Significantly improve firewire IPV6 support, from YOSHIFUJI
      Hideaki.

   8) Allow multiple packets to be sent in a single transmission using
      network coding in batman-adv, from Martin Hundebøll.

   9) Add support for T5 cxgb4 chips, from Santosh Rastapur.

  10) Generalize the VXLAN forwarding tables so that there is more
      flexibility in configurating various aspects of the endpoints.
      From David Stevens.

  11) Support RSS and TSO in hardware over GRE tunnels in bxn2x driver,
      from Dmitry Kravkov.

  12) Zero copy support in nfnelink_queue, from Eric Dumazet and Pablo
      Neira Ayuso.

  13) Start adding networking selftests.

  14) In situations of overload on the same AF_PACKET fanout socket, or
      per-cpu packet receive queue, minimize drop by distributing the
      load to other cpus/fanouts.  From Willem de Bruijn and Eric
      Dumazet.

  15) Add support for new payload offset BPF instruction, from Daniel
      Borkmann.

  16) Convert several drivers over to mdoule_platform_driver(), from
      Sachin Kamat.

  17) Provide a minimal BPF JIT image disassembler userspace tool, from
      Daniel Borkmann.

  18) Rewrite F-RTO implementation in TCP to match the final
      specification of it in RFC4138 and RFC5682.  From Yuchung Cheng.

  19) Provide netlink socket diag of netlink sockets ("Yo dawg, I hear
      you like netlink, so I implemented netlink dumping of netlink
      sockets.") From Andrey Vagin.

  20) Remove ugly passing of rtnetlink attributes into rtnl_doit
      functions, from Thomas Graf.

  21) Allow userspace to be able to see if a configuration change occurs
      in the middle of an address or device list dump, from Nicolas
      Dichtel.

  22) Support RFC3168 ECN protection for ipv6 fragments, from Hannes
      Frederic Sowa.

  23) Increase accuracy of packet length used by packet scheduler, from
      Jason Wang.

  24) Beginning set of changes to make ipv4/ipv6 fragment handling more
      scalable and less susceptible to overload and locking contention,
      from Jesper Dangaard Brouer.

  25) Get rid of using non-type-safe NLMSG_* macros and use nlmsg_*()
      instead.  From Hong Zhiguo.

  26) Optimize route usage in IPVS by avoiding reference counting where
      possible, from Julian Anastasov.

  27) Convert IPVS schedulers to RCU, also from Julian Anastasov.

  28) Support cpu fanouts in xt_NFQUEUE netfilter target, from Holger
      Eitzenberger.

  29) Network namespace support for nf_log, ebt_log, xt_LOG, ipt_ULOG,
      nfnetlink_log, and nfnetlink_queue.  From Gao feng.

  30) Implement RFC3168 ECN protection, from Hannes Frederic Sowa.

  31) Support several new r8169 chips, from Hayes Wang.

  32) Support tokenized interface identifiers in ipv6, from Daniel
      Borkmann.

  33) Use usbnet_link_change() helper in USB net driver, from Ming Lei.

  34) Add 802.1ad vlan offload support, from Patrick McHardy.

  35) Support mmap() based netlink communication, also from Patrick
      McHardy.

  36) Support HW timestamping in mlx4 driver, from Amir Vadai.

  37) Rationalize AF_PACKET packet timestamping when transmitting, from
      Willem de Bruijn and Daniel Borkmann.

  38) Bring parity to what's provided by /proc/net/packet socket dumping
      and the info provided by netlink socket dumping of AF_PACKET
      sockets.  From Nicolas Dichtel.

  39) Fix peeking beyond zero sized SKBs in AF_UNIX, from Benjamin
      Poirier"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1722 commits)
  filter: fix va_list build error
  af_unix: fix a fatal race with bit fields
  bnx2x: Prevent memory leak when cnic is absent
  bnx2x: correct reading of speed capabilities
  net: sctp: attribute printl with __printf for gcc fmt checks
  netlink: kconfig: move mmap i/o into netlink kconfig
  netpoll: convert mutex into a semaphore
  netlink: Fix skb ref counting.
  net_sched: act_ipt forward compat with xtables
  mlx4_en: fix a build error on 32bit arches
  Revert "bnx2x: allow nvram test to run when device is down"
  bridge: avoid OOPS if root port not found
  drivers: net: cpsw: fix kernel warn on cpsw irq enable
  sh_eth: use random MAC address if no valid one supplied
  3c509.c: call SET_NETDEV_DEV for all device types (ISA/ISAPnP/EISA)
  tg3: fix to append hardware time stamping flags
  unix/stream: fix peeking with an offset larger than data in queue
  unix/dgram: fix peeking with an offset larger than data in queue
  unix/dgram: peek beyond 0-sized skbs
  openvswitch: Remove unneeded ovs_netdev_get_ifindex()
  ...
2013-05-01 14:08:52 -07:00

1682 lines
47 KiB
C

/* SCTP kernel implementation
* (C) Copyright IBM Corp. 2001, 2004
* Copyright (c) 1999-2000 Cisco, Inc.
* Copyright (c) 1999-2001 Motorola, Inc.
* Copyright (c) 2001 Intel Corp.
* Copyright (c) 2001 La Monte H.P. Yarroll
*
* This file is part of the SCTP kernel implementation
*
* This module provides the abstraction for an SCTP association.
*
* This SCTP implementation is free software;
* you can redistribute it and/or modify it under the terms of
* the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*
* This SCTP implementation is distributed in the hope that it
* will be useful, but WITHOUT ANY WARRANTY; without even the implied
* ************************
* warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
* See the GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with GNU CC; see the file COPYING. If not, write to
* the Free Software Foundation, 59 Temple Place - Suite 330,
* Boston, MA 02111-1307, USA.
*
* Please send any bug reports or fixes you make to the
* email address(es):
* lksctp developers <lksctp-developers@lists.sourceforge.net>
*
* Or submit a bug report through the following website:
* http://www.sf.net/projects/lksctp
*
* Written or modified by:
* La Monte H.P. Yarroll <piggy@acm.org>
* Karl Knutson <karl@athena.chicago.il.us>
* Jon Grimm <jgrimm@us.ibm.com>
* Xingang Guo <xingang.guo@intel.com>
* Hui Huang <hui.huang@nokia.com>
* Sridhar Samudrala <sri@us.ibm.com>
* Daisy Chang <daisyc@us.ibm.com>
* Ryan Layer <rmlayer@us.ibm.com>
* Kevin Gao <kevin.gao@intel.com>
*
* Any bugs reported given to us we will try to fix... any fixes shared will
* be incorporated into the next SCTP release.
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/types.h>
#include <linux/fcntl.h>
#include <linux/poll.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/in.h>
#include <net/ipv6.h>
#include <net/sctp/sctp.h>
#include <net/sctp/sm.h>
/* Forward declarations for internal functions. */
static void sctp_assoc_bh_rcv(struct work_struct *work);
static void sctp_assoc_free_asconf_acks(struct sctp_association *asoc);
static void sctp_assoc_free_asconf_queue(struct sctp_association *asoc);
/* 1st Level Abstractions. */
/* Initialize a new association from provided memory. */
static struct sctp_association *sctp_association_init(struct sctp_association *asoc,
const struct sctp_endpoint *ep,
const struct sock *sk,
sctp_scope_t scope,
gfp_t gfp)
{
struct net *net = sock_net(sk);
struct sctp_sock *sp;
int i;
sctp_paramhdr_t *p;
int err;
/* Retrieve the SCTP per socket area. */
sp = sctp_sk((struct sock *)sk);
/* Discarding const is appropriate here. */
asoc->ep = (struct sctp_endpoint *)ep;
sctp_endpoint_hold(asoc->ep);
/* Hold the sock. */
asoc->base.sk = (struct sock *)sk;
sock_hold(asoc->base.sk);
/* Initialize the common base substructure. */
asoc->base.type = SCTP_EP_TYPE_ASSOCIATION;
/* Initialize the object handling fields. */
atomic_set(&asoc->base.refcnt, 1);
asoc->base.dead = false;
/* Initialize the bind addr area. */
sctp_bind_addr_init(&asoc->base.bind_addr, ep->base.bind_addr.port);
asoc->state = SCTP_STATE_CLOSED;
/* Set these values from the socket values, a conversion between
* millsecons to seconds/microseconds must also be done.
*/
asoc->cookie_life.tv_sec = sp->assocparams.sasoc_cookie_life / 1000;
asoc->cookie_life.tv_usec = (sp->assocparams.sasoc_cookie_life % 1000)
* 1000;
asoc->frag_point = 0;
asoc->user_frag = sp->user_frag;
/* Set the association max_retrans and RTO values from the
* socket values.
*/
asoc->max_retrans = sp->assocparams.sasoc_asocmaxrxt;
asoc->pf_retrans = net->sctp.pf_retrans;
asoc->rto_initial = msecs_to_jiffies(sp->rtoinfo.srto_initial);
asoc->rto_max = msecs_to_jiffies(sp->rtoinfo.srto_max);
asoc->rto_min = msecs_to_jiffies(sp->rtoinfo.srto_min);
asoc->overall_error_count = 0;
/* Initialize the association's heartbeat interval based on the
* sock configured value.
*/
asoc->hbinterval = msecs_to_jiffies(sp->hbinterval);
/* Initialize path max retrans value. */
asoc->pathmaxrxt = sp->pathmaxrxt;
/* Initialize default path MTU. */
asoc->pathmtu = sp->pathmtu;
/* Set association default SACK delay */
asoc->sackdelay = msecs_to_jiffies(sp->sackdelay);
asoc->sackfreq = sp->sackfreq;
/* Set the association default flags controlling
* Heartbeat, SACK delay, and Path MTU Discovery.
*/
asoc->param_flags = sp->param_flags;
/* Initialize the maximum mumber of new data packets that can be sent
* in a burst.
*/
asoc->max_burst = sp->max_burst;
/* initialize association timers */
asoc->timeouts[SCTP_EVENT_TIMEOUT_NONE] = 0;
asoc->timeouts[SCTP_EVENT_TIMEOUT_T1_COOKIE] = asoc->rto_initial;
asoc->timeouts[SCTP_EVENT_TIMEOUT_T1_INIT] = asoc->rto_initial;
asoc->timeouts[SCTP_EVENT_TIMEOUT_T2_SHUTDOWN] = asoc->rto_initial;
asoc->timeouts[SCTP_EVENT_TIMEOUT_T3_RTX] = 0;
asoc->timeouts[SCTP_EVENT_TIMEOUT_T4_RTO] = 0;
/* sctpimpguide Section 2.12.2
* If the 'T5-shutdown-guard' timer is used, it SHOULD be set to the
* recommended value of 5 times 'RTO.Max'.
*/
asoc->timeouts[SCTP_EVENT_TIMEOUT_T5_SHUTDOWN_GUARD]
= 5 * asoc->rto_max;
asoc->timeouts[SCTP_EVENT_TIMEOUT_HEARTBEAT] = 0;
asoc->timeouts[SCTP_EVENT_TIMEOUT_SACK] = asoc->sackdelay;
asoc->timeouts[SCTP_EVENT_TIMEOUT_AUTOCLOSE] =
min_t(unsigned long, sp->autoclose, net->sctp.max_autoclose) * HZ;
/* Initializes the timers */
for (i = SCTP_EVENT_TIMEOUT_NONE; i < SCTP_NUM_TIMEOUT_TYPES; ++i)
setup_timer(&asoc->timers[i], sctp_timer_events[i],
(unsigned long)asoc);
/* Pull default initialization values from the sock options.
* Note: This assumes that the values have already been
* validated in the sock.
*/
asoc->c.sinit_max_instreams = sp->initmsg.sinit_max_instreams;
asoc->c.sinit_num_ostreams = sp->initmsg.sinit_num_ostreams;
asoc->max_init_attempts = sp->initmsg.sinit_max_attempts;
asoc->max_init_timeo =
msecs_to_jiffies(sp->initmsg.sinit_max_init_timeo);
/* Allocate storage for the ssnmap after the inbound and outbound
* streams have been negotiated during Init.
*/
asoc->ssnmap = NULL;
/* Set the local window size for receive.
* This is also the rcvbuf space per association.
* RFC 6 - A SCTP receiver MUST be able to receive a minimum of
* 1500 bytes in one SCTP packet.
*/
if ((sk->sk_rcvbuf/2) < SCTP_DEFAULT_MINWINDOW)
asoc->rwnd = SCTP_DEFAULT_MINWINDOW;
else
asoc->rwnd = sk->sk_rcvbuf/2;
asoc->a_rwnd = asoc->rwnd;
asoc->rwnd_over = 0;
asoc->rwnd_press = 0;
/* Use my own max window until I learn something better. */
asoc->peer.rwnd = SCTP_DEFAULT_MAXWINDOW;
/* Set the sndbuf size for transmit. */
asoc->sndbuf_used = 0;
/* Initialize the receive memory counter */
atomic_set(&asoc->rmem_alloc, 0);
init_waitqueue_head(&asoc->wait);
asoc->c.my_vtag = sctp_generate_tag(ep);
asoc->peer.i.init_tag = 0; /* INIT needs a vtag of 0. */
asoc->c.peer_vtag = 0;
asoc->c.my_ttag = 0;
asoc->c.peer_ttag = 0;
asoc->c.my_port = ep->base.bind_addr.port;
asoc->c.initial_tsn = sctp_generate_tsn(ep);
asoc->next_tsn = asoc->c.initial_tsn;
asoc->ctsn_ack_point = asoc->next_tsn - 1;
asoc->adv_peer_ack_point = asoc->ctsn_ack_point;
asoc->highest_sacked = asoc->ctsn_ack_point;
asoc->last_cwr_tsn = asoc->ctsn_ack_point;
asoc->unack_data = 0;
/* ADDIP Section 4.1 Asconf Chunk Procedures
*
* When an endpoint has an ASCONF signaled change to be sent to the
* remote endpoint it should do the following:
* ...
* A2) a serial number should be assigned to the chunk. The serial
* number SHOULD be a monotonically increasing number. The serial
* numbers SHOULD be initialized at the start of the
* association to the same value as the initial TSN.
*/
asoc->addip_serial = asoc->c.initial_tsn;
INIT_LIST_HEAD(&asoc->addip_chunk_list);
INIT_LIST_HEAD(&asoc->asconf_ack_list);
/* Make an empty list of remote transport addresses. */
INIT_LIST_HEAD(&asoc->peer.transport_addr_list);
asoc->peer.transport_count = 0;
/* RFC 2960 5.1 Normal Establishment of an Association
*
* After the reception of the first data chunk in an
* association the endpoint must immediately respond with a
* sack to acknowledge the data chunk. Subsequent
* acknowledgements should be done as described in Section
* 6.2.
*
* [We implement this by telling a new association that it
* already received one packet.]
*/
asoc->peer.sack_needed = 1;
asoc->peer.sack_cnt = 0;
asoc->peer.sack_generation = 1;
/* Assume that the peer will tell us if he recognizes ASCONF
* as part of INIT exchange.
* The sctp_addip_noauth option is there for backward compatibilty
* and will revert old behavior.
*/
asoc->peer.asconf_capable = 0;
if (net->sctp.addip_noauth)
asoc->peer.asconf_capable = 1;
asoc->asconf_addr_del_pending = NULL;
asoc->src_out_of_asoc_ok = 0;
asoc->new_transport = NULL;
/* Create an input queue. */
sctp_inq_init(&asoc->base.inqueue);
sctp_inq_set_th_handler(&asoc->base.inqueue, sctp_assoc_bh_rcv);
/* Create an output queue. */
sctp_outq_init(asoc, &asoc->outqueue);
if (!sctp_ulpq_init(&asoc->ulpq, asoc))
goto fail_init;
memset(&asoc->peer.tsn_map, 0, sizeof(struct sctp_tsnmap));
asoc->need_ecne = 0;
asoc->assoc_id = 0;
/* Assume that peer would support both address types unless we are
* told otherwise.
*/
asoc->peer.ipv4_address = 1;
if (asoc->base.sk->sk_family == PF_INET6)
asoc->peer.ipv6_address = 1;
INIT_LIST_HEAD(&asoc->asocs);
asoc->autoclose = sp->autoclose;
asoc->default_stream = sp->default_stream;
asoc->default_ppid = sp->default_ppid;
asoc->default_flags = sp->default_flags;
asoc->default_context = sp->default_context;
asoc->default_timetolive = sp->default_timetolive;
asoc->default_rcv_context = sp->default_rcv_context;
/* SCTP_GET_ASSOC_STATS COUNTERS */
memset(&asoc->stats, 0, sizeof(struct sctp_priv_assoc_stats));
/* AUTH related initializations */
INIT_LIST_HEAD(&asoc->endpoint_shared_keys);
err = sctp_auth_asoc_copy_shkeys(ep, asoc, gfp);
if (err)
goto fail_init;
asoc->active_key_id = ep->active_key_id;
asoc->asoc_shared_key = NULL;
asoc->default_hmac_id = 0;
/* Save the hmacs and chunks list into this association */
if (ep->auth_hmacs_list)
memcpy(asoc->c.auth_hmacs, ep->auth_hmacs_list,
ntohs(ep->auth_hmacs_list->param_hdr.length));
if (ep->auth_chunk_list)
memcpy(asoc->c.auth_chunks, ep->auth_chunk_list,
ntohs(ep->auth_chunk_list->param_hdr.length));
/* Get the AUTH random number for this association */
p = (sctp_paramhdr_t *)asoc->c.auth_random;
p->type = SCTP_PARAM_RANDOM;
p->length = htons(sizeof(sctp_paramhdr_t) + SCTP_AUTH_RANDOM_LENGTH);
get_random_bytes(p+1, SCTP_AUTH_RANDOM_LENGTH);
return asoc;
fail_init:
sctp_endpoint_put(asoc->ep);
sock_put(asoc->base.sk);
return NULL;
}
/* Allocate and initialize a new association */
struct sctp_association *sctp_association_new(const struct sctp_endpoint *ep,
const struct sock *sk,
sctp_scope_t scope,
gfp_t gfp)
{
struct sctp_association *asoc;
asoc = t_new(struct sctp_association, gfp);
if (!asoc)
goto fail;
if (!sctp_association_init(asoc, ep, sk, scope, gfp))
goto fail_init;
SCTP_DBG_OBJCNT_INC(assoc);
SCTP_DEBUG_PRINTK("Created asoc %p\n", asoc);
return asoc;
fail_init:
kfree(asoc);
fail:
return NULL;
}
/* Free this association if possible. There may still be users, so
* the actual deallocation may be delayed.
*/
void sctp_association_free(struct sctp_association *asoc)
{
struct sock *sk = asoc->base.sk;
struct sctp_transport *transport;
struct list_head *pos, *temp;
int i;
/* Only real associations count against the endpoint, so
* don't bother for if this is a temporary association.
*/
if (!asoc->temp) {
list_del(&asoc->asocs);
/* Decrement the backlog value for a TCP-style listening
* socket.
*/
if (sctp_style(sk, TCP) && sctp_sstate(sk, LISTENING))
sk->sk_ack_backlog--;
}
/* Mark as dead, so other users can know this structure is
* going away.
*/
asoc->base.dead = true;
/* Dispose of any data lying around in the outqueue. */
sctp_outq_free(&asoc->outqueue);
/* Dispose of any pending messages for the upper layer. */
sctp_ulpq_free(&asoc->ulpq);
/* Dispose of any pending chunks on the inqueue. */
sctp_inq_free(&asoc->base.inqueue);
sctp_tsnmap_free(&asoc->peer.tsn_map);
/* Free ssnmap storage. */
sctp_ssnmap_free(asoc->ssnmap);
/* Clean up the bound address list. */
sctp_bind_addr_free(&asoc->base.bind_addr);
/* Do we need to go through all of our timers and
* delete them? To be safe we will try to delete all, but we
* should be able to go through and make a guess based
* on our state.
*/
for (i = SCTP_EVENT_TIMEOUT_NONE; i < SCTP_NUM_TIMEOUT_TYPES; ++i) {
if (del_timer(&asoc->timers[i]))
sctp_association_put(asoc);
}
/* Free peer's cached cookie. */
kfree(asoc->peer.cookie);
kfree(asoc->peer.peer_random);
kfree(asoc->peer.peer_chunks);
kfree(asoc->peer.peer_hmacs);
/* Release the transport structures. */
list_for_each_safe(pos, temp, &asoc->peer.transport_addr_list) {
transport = list_entry(pos, struct sctp_transport, transports);
list_del_rcu(pos);
sctp_transport_free(transport);
}
asoc->peer.transport_count = 0;
sctp_asconf_queue_teardown(asoc);
/* Free pending address space being deleted */
if (asoc->asconf_addr_del_pending != NULL)
kfree(asoc->asconf_addr_del_pending);
/* AUTH - Free the endpoint shared keys */
sctp_auth_destroy_keys(&asoc->endpoint_shared_keys);
/* AUTH - Free the association shared key */
sctp_auth_key_put(asoc->asoc_shared_key);
sctp_association_put(asoc);
}
/* Cleanup and free up an association. */
static void sctp_association_destroy(struct sctp_association *asoc)
{
SCTP_ASSERT(asoc->base.dead, "Assoc is not dead", return);
sctp_endpoint_put(asoc->ep);
sock_put(asoc->base.sk);
if (asoc->assoc_id != 0) {
spin_lock_bh(&sctp_assocs_id_lock);
idr_remove(&sctp_assocs_id, asoc->assoc_id);
spin_unlock_bh(&sctp_assocs_id_lock);
}
WARN_ON(atomic_read(&asoc->rmem_alloc));
kfree(asoc);
SCTP_DBG_OBJCNT_DEC(assoc);
}
/* Change the primary destination address for the peer. */
void sctp_assoc_set_primary(struct sctp_association *asoc,
struct sctp_transport *transport)
{
int changeover = 0;
/* it's a changeover only if we already have a primary path
* that we are changing
*/
if (asoc->peer.primary_path != NULL &&
asoc->peer.primary_path != transport)
changeover = 1 ;
asoc->peer.primary_path = transport;
/* Set a default msg_name for events. */
memcpy(&asoc->peer.primary_addr, &transport->ipaddr,
sizeof(union sctp_addr));
/* If the primary path is changing, assume that the
* user wants to use this new path.
*/
if ((transport->state == SCTP_ACTIVE) ||
(transport->state == SCTP_UNKNOWN))
asoc->peer.active_path = transport;
/*
* SFR-CACC algorithm:
* Upon the receipt of a request to change the primary
* destination address, on the data structure for the new
* primary destination, the sender MUST do the following:
*
* 1) If CHANGEOVER_ACTIVE is set, then there was a switch
* to this destination address earlier. The sender MUST set
* CYCLING_CHANGEOVER to indicate that this switch is a
* double switch to the same destination address.
*
* Really, only bother is we have data queued or outstanding on
* the association.
*/
if (!asoc->outqueue.outstanding_bytes && !asoc->outqueue.out_qlen)
return;
if (transport->cacc.changeover_active)
transport->cacc.cycling_changeover = changeover;
/* 2) The sender MUST set CHANGEOVER_ACTIVE to indicate that
* a changeover has occurred.
*/
transport->cacc.changeover_active = changeover;
/* 3) The sender MUST store the next TSN to be sent in
* next_tsn_at_change.
*/
transport->cacc.next_tsn_at_change = asoc->next_tsn;
}
/* Remove a transport from an association. */
void sctp_assoc_rm_peer(struct sctp_association *asoc,
struct sctp_transport *peer)
{
struct list_head *pos;
struct sctp_transport *transport;
SCTP_DEBUG_PRINTK_IPADDR("sctp_assoc_rm_peer:association %p addr: ",
" port: %d\n",
asoc,
(&peer->ipaddr),
ntohs(peer->ipaddr.v4.sin_port));
/* If we are to remove the current retran_path, update it
* to the next peer before removing this peer from the list.
*/
if (asoc->peer.retran_path == peer)
sctp_assoc_update_retran_path(asoc);
/* Remove this peer from the list. */
list_del_rcu(&peer->transports);
/* Get the first transport of asoc. */
pos = asoc->peer.transport_addr_list.next;
transport = list_entry(pos, struct sctp_transport, transports);
/* Update any entries that match the peer to be deleted. */
if (asoc->peer.primary_path == peer)
sctp_assoc_set_primary(asoc, transport);
if (asoc->peer.active_path == peer)
asoc->peer.active_path = transport;
if (asoc->peer.retran_path == peer)
asoc->peer.retran_path = transport;
if (asoc->peer.last_data_from == peer)
asoc->peer.last_data_from = transport;
/* If we remove the transport an INIT was last sent to, set it to
* NULL. Combined with the update of the retran path above, this
* will cause the next INIT to be sent to the next available
* transport, maintaining the cycle.
*/
if (asoc->init_last_sent_to == peer)
asoc->init_last_sent_to = NULL;
/* If we remove the transport an SHUTDOWN was last sent to, set it
* to NULL. Combined with the update of the retran path above, this
* will cause the next SHUTDOWN to be sent to the next available
* transport, maintaining the cycle.
*/
if (asoc->shutdown_last_sent_to == peer)
asoc->shutdown_last_sent_to = NULL;
/* If we remove the transport an ASCONF was last sent to, set it to
* NULL.
*/
if (asoc->addip_last_asconf &&
asoc->addip_last_asconf->transport == peer)
asoc->addip_last_asconf->transport = NULL;
/* If we have something on the transmitted list, we have to
* save it off. The best place is the active path.
*/
if (!list_empty(&peer->transmitted)) {
struct sctp_transport *active = asoc->peer.active_path;
struct sctp_chunk *ch;
/* Reset the transport of each chunk on this list */
list_for_each_entry(ch, &peer->transmitted,
transmitted_list) {
ch->transport = NULL;
ch->rtt_in_progress = 0;
}
list_splice_tail_init(&peer->transmitted,
&active->transmitted);
/* Start a T3 timer here in case it wasn't running so
* that these migrated packets have a chance to get
* retrnasmitted.
*/
if (!timer_pending(&active->T3_rtx_timer))
if (!mod_timer(&active->T3_rtx_timer,
jiffies + active->rto))
sctp_transport_hold(active);
}
asoc->peer.transport_count--;
sctp_transport_free(peer);
}
/* Add a transport address to an association. */
struct sctp_transport *sctp_assoc_add_peer(struct sctp_association *asoc,
const union sctp_addr *addr,
const gfp_t gfp,
const int peer_state)
{
struct net *net = sock_net(asoc->base.sk);
struct sctp_transport *peer;
struct sctp_sock *sp;
unsigned short port;
sp = sctp_sk(asoc->base.sk);
/* AF_INET and AF_INET6 share common port field. */
port = ntohs(addr->v4.sin_port);
SCTP_DEBUG_PRINTK_IPADDR("sctp_assoc_add_peer:association %p addr: ",
" port: %d state:%d\n",
asoc,
addr,
port,
peer_state);
/* Set the port if it has not been set yet. */
if (0 == asoc->peer.port)
asoc->peer.port = port;
/* Check to see if this is a duplicate. */
peer = sctp_assoc_lookup_paddr(asoc, addr);
if (peer) {
/* An UNKNOWN state is only set on transports added by
* user in sctp_connectx() call. Such transports should be
* considered CONFIRMED per RFC 4960, Section 5.4.
*/
if (peer->state == SCTP_UNKNOWN) {
peer->state = SCTP_ACTIVE;
}
return peer;
}
peer = sctp_transport_new(net, addr, gfp);
if (!peer)
return NULL;
sctp_transport_set_owner(peer, asoc);
/* Initialize the peer's heartbeat interval based on the
* association configured value.
*/
peer->hbinterval = asoc->hbinterval;
/* Set the path max_retrans. */
peer->pathmaxrxt = asoc->pathmaxrxt;
/* And the partial failure retrnas threshold */
peer->pf_retrans = asoc->pf_retrans;
/* Initialize the peer's SACK delay timeout based on the
* association configured value.
*/
peer->sackdelay = asoc->sackdelay;
peer->sackfreq = asoc->sackfreq;
/* Enable/disable heartbeat, SACK delay, and path MTU discovery
* based on association setting.
*/
peer->param_flags = asoc->param_flags;
sctp_transport_route(peer, NULL, sp);
/* Initialize the pmtu of the transport. */
if (peer->param_flags & SPP_PMTUD_DISABLE) {
if (asoc->pathmtu)
peer->pathmtu = asoc->pathmtu;
else
peer->pathmtu = SCTP_DEFAULT_MAXSEGMENT;
}
/* If this is the first transport addr on this association,
* initialize the association PMTU to the peer's PMTU.
* If not and the current association PMTU is higher than the new
* peer's PMTU, reset the association PMTU to the new peer's PMTU.
*/
if (asoc->pathmtu)
asoc->pathmtu = min_t(int, peer->pathmtu, asoc->pathmtu);
else
asoc->pathmtu = peer->pathmtu;
SCTP_DEBUG_PRINTK("sctp_assoc_add_peer:association %p PMTU set to "
"%d\n", asoc, asoc->pathmtu);
peer->pmtu_pending = 0;
asoc->frag_point = sctp_frag_point(asoc, asoc->pathmtu);
/* The asoc->peer.port might not be meaningful yet, but
* initialize the packet structure anyway.
*/
sctp_packet_init(&peer->packet, peer, asoc->base.bind_addr.port,
asoc->peer.port);
/* 7.2.1 Slow-Start
*
* o The initial cwnd before DATA transmission or after a sufficiently
* long idle period MUST be set to
* min(4*MTU, max(2*MTU, 4380 bytes))
*
* o The initial value of ssthresh MAY be arbitrarily high
* (for example, implementations MAY use the size of the
* receiver advertised window).
*/
peer->cwnd = min(4*asoc->pathmtu, max_t(__u32, 2*asoc->pathmtu, 4380));
/* At this point, we may not have the receiver's advertised window,
* so initialize ssthresh to the default value and it will be set
* later when we process the INIT.
*/
peer->ssthresh = SCTP_DEFAULT_MAXWINDOW;
peer->partial_bytes_acked = 0;
peer->flight_size = 0;
peer->burst_limited = 0;
/* Set the transport's RTO.initial value */
peer->rto = asoc->rto_initial;
sctp_max_rto(asoc, peer);
/* Set the peer's active state. */
peer->state = peer_state;
/* Attach the remote transport to our asoc. */
list_add_tail_rcu(&peer->transports, &asoc->peer.transport_addr_list);
asoc->peer.transport_count++;
/* If we do not yet have a primary path, set one. */
if (!asoc->peer.primary_path) {
sctp_assoc_set_primary(asoc, peer);
asoc->peer.retran_path = peer;
}
if (asoc->peer.active_path == asoc->peer.retran_path &&
peer->state != SCTP_UNCONFIRMED) {
asoc->peer.retran_path = peer;
}
return peer;
}
/* Delete a transport address from an association. */
void sctp_assoc_del_peer(struct sctp_association *asoc,
const union sctp_addr *addr)
{
struct list_head *pos;
struct list_head *temp;
struct sctp_transport *transport;
list_for_each_safe(pos, temp, &asoc->peer.transport_addr_list) {
transport = list_entry(pos, struct sctp_transport, transports);
if (sctp_cmp_addr_exact(addr, &transport->ipaddr)) {
/* Do book keeping for removing the peer and free it. */
sctp_assoc_rm_peer(asoc, transport);
break;
}
}
}
/* Lookup a transport by address. */
struct sctp_transport *sctp_assoc_lookup_paddr(
const struct sctp_association *asoc,
const union sctp_addr *address)
{
struct sctp_transport *t;
/* Cycle through all transports searching for a peer address. */
list_for_each_entry(t, &asoc->peer.transport_addr_list,
transports) {
if (sctp_cmp_addr_exact(address, &t->ipaddr))
return t;
}
return NULL;
}
/* Remove all transports except a give one */
void sctp_assoc_del_nonprimary_peers(struct sctp_association *asoc,
struct sctp_transport *primary)
{
struct sctp_transport *temp;
struct sctp_transport *t;
list_for_each_entry_safe(t, temp, &asoc->peer.transport_addr_list,
transports) {
/* if the current transport is not the primary one, delete it */
if (t != primary)
sctp_assoc_rm_peer(asoc, t);
}
}
/* Engage in transport control operations.
* Mark the transport up or down and send a notification to the user.
* Select and update the new active and retran paths.
*/
void sctp_assoc_control_transport(struct sctp_association *asoc,
struct sctp_transport *transport,
sctp_transport_cmd_t command,
sctp_sn_error_t error)
{
struct sctp_transport *t = NULL;
struct sctp_transport *first;
struct sctp_transport *second;
struct sctp_ulpevent *event;
struct sockaddr_storage addr;
int spc_state = 0;
bool ulp_notify = true;
/* Record the transition on the transport. */
switch (command) {
case SCTP_TRANSPORT_UP:
/* If we are moving from UNCONFIRMED state due
* to heartbeat success, report the SCTP_ADDR_CONFIRMED
* state to the user, otherwise report SCTP_ADDR_AVAILABLE.
*/
if (SCTP_UNCONFIRMED == transport->state &&
SCTP_HEARTBEAT_SUCCESS == error)
spc_state = SCTP_ADDR_CONFIRMED;
else
spc_state = SCTP_ADDR_AVAILABLE;
/* Don't inform ULP about transition from PF to
* active state and set cwnd to 1, see SCTP
* Quick failover draft section 5.1, point 5
*/
if (transport->state == SCTP_PF) {
ulp_notify = false;
transport->cwnd = 1;
}
transport->state = SCTP_ACTIVE;
break;
case SCTP_TRANSPORT_DOWN:
/* If the transport was never confirmed, do not transition it
* to inactive state. Also, release the cached route since
* there may be a better route next time.
*/
if (transport->state != SCTP_UNCONFIRMED)
transport->state = SCTP_INACTIVE;
else {
dst_release(transport->dst);
transport->dst = NULL;
}
spc_state = SCTP_ADDR_UNREACHABLE;
break;
case SCTP_TRANSPORT_PF:
transport->state = SCTP_PF;
ulp_notify = false;
break;
default:
return;
}
/* Generate and send a SCTP_PEER_ADDR_CHANGE notification to the
* user.
*/
if (ulp_notify) {
memset(&addr, 0, sizeof(struct sockaddr_storage));
memcpy(&addr, &transport->ipaddr,
transport->af_specific->sockaddr_len);
event = sctp_ulpevent_make_peer_addr_change(asoc, &addr,
0, spc_state, error, GFP_ATOMIC);
if (event)
sctp_ulpq_tail_event(&asoc->ulpq, event);
}
/* Select new active and retran paths. */
/* Look for the two most recently used active transports.
*
* This code produces the wrong ordering whenever jiffies
* rolls over, but we still get usable transports, so we don't
* worry about it.
*/
first = NULL; second = NULL;
list_for_each_entry(t, &asoc->peer.transport_addr_list,
transports) {
if ((t->state == SCTP_INACTIVE) ||
(t->state == SCTP_UNCONFIRMED) ||
(t->state == SCTP_PF))
continue;
if (!first || t->last_time_heard > first->last_time_heard) {
second = first;
first = t;
}
if (!second || t->last_time_heard > second->last_time_heard)
second = t;
}
/* RFC 2960 6.4 Multi-Homed SCTP Endpoints
*
* By default, an endpoint should always transmit to the
* primary path, unless the SCTP user explicitly specifies the
* destination transport address (and possibly source
* transport address) to use.
*
* [If the primary is active but not most recent, bump the most
* recently used transport.]
*/
if (((asoc->peer.primary_path->state == SCTP_ACTIVE) ||
(asoc->peer.primary_path->state == SCTP_UNKNOWN)) &&
first != asoc->peer.primary_path) {
second = first;
first = asoc->peer.primary_path;
}
/* If we failed to find a usable transport, just camp on the
* primary, even if it is inactive.
*/
if (!first) {
first = asoc->peer.primary_path;
second = asoc->peer.primary_path;
}
/* Set the active and retran transports. */
asoc->peer.active_path = first;
asoc->peer.retran_path = second;
}
/* Hold a reference to an association. */
void sctp_association_hold(struct sctp_association *asoc)
{
atomic_inc(&asoc->base.refcnt);
}
/* Release a reference to an association and cleanup
* if there are no more references.
*/
void sctp_association_put(struct sctp_association *asoc)
{
if (atomic_dec_and_test(&asoc->base.refcnt))
sctp_association_destroy(asoc);
}
/* Allocate the next TSN, Transmission Sequence Number, for the given
* association.
*/
__u32 sctp_association_get_next_tsn(struct sctp_association *asoc)
{
/* From Section 1.6 Serial Number Arithmetic:
* Transmission Sequence Numbers wrap around when they reach
* 2**32 - 1. That is, the next TSN a DATA chunk MUST use
* after transmitting TSN = 2*32 - 1 is TSN = 0.
*/
__u32 retval = asoc->next_tsn;
asoc->next_tsn++;
asoc->unack_data++;
return retval;
}
/* Compare two addresses to see if they match. Wildcard addresses
* only match themselves.
*/
int sctp_cmp_addr_exact(const union sctp_addr *ss1,
const union sctp_addr *ss2)
{
struct sctp_af *af;
af = sctp_get_af_specific(ss1->sa.sa_family);
if (unlikely(!af))
return 0;
return af->cmp_addr(ss1, ss2);
}
/* Return an ecne chunk to get prepended to a packet.
* Note: We are sly and return a shared, prealloced chunk. FIXME:
* No we don't, but we could/should.
*/
struct sctp_chunk *sctp_get_ecne_prepend(struct sctp_association *asoc)
{
struct sctp_chunk *chunk;
/* Send ECNE if needed.
* Not being able to allocate a chunk here is not deadly.
*/
if (asoc->need_ecne)
chunk = sctp_make_ecne(asoc, asoc->last_ecne_tsn);
else
chunk = NULL;
return chunk;
}
/*
* Find which transport this TSN was sent on.
*/
struct sctp_transport *sctp_assoc_lookup_tsn(struct sctp_association *asoc,
__u32 tsn)
{
struct sctp_transport *active;
struct sctp_transport *match;
struct sctp_transport *transport;
struct sctp_chunk *chunk;
__be32 key = htonl(tsn);
match = NULL;
/*
* FIXME: In general, find a more efficient data structure for
* searching.
*/
/*
* The general strategy is to search each transport's transmitted
* list. Return which transport this TSN lives on.
*
* Let's be hopeful and check the active_path first.
* Another optimization would be to know if there is only one
* outbound path and not have to look for the TSN at all.
*
*/
active = asoc->peer.active_path;
list_for_each_entry(chunk, &active->transmitted,
transmitted_list) {
if (key == chunk->subh.data_hdr->tsn) {
match = active;
goto out;
}
}
/* If not found, go search all the other transports. */
list_for_each_entry(transport, &asoc->peer.transport_addr_list,
transports) {
if (transport == active)
continue;
list_for_each_entry(chunk, &transport->transmitted,
transmitted_list) {
if (key == chunk->subh.data_hdr->tsn) {
match = transport;
goto out;
}
}
}
out:
return match;
}
/* Is this the association we are looking for? */
struct sctp_transport *sctp_assoc_is_match(struct sctp_association *asoc,
struct net *net,
const union sctp_addr *laddr,
const union sctp_addr *paddr)
{
struct sctp_transport *transport;
if ((htons(asoc->base.bind_addr.port) == laddr->v4.sin_port) &&
(htons(asoc->peer.port) == paddr->v4.sin_port) &&
net_eq(sock_net(asoc->base.sk), net)) {
transport = sctp_assoc_lookup_paddr(asoc, paddr);
if (!transport)
goto out;
if (sctp_bind_addr_match(&asoc->base.bind_addr, laddr,
sctp_sk(asoc->base.sk)))
goto out;
}
transport = NULL;
out:
return transport;
}
/* Do delayed input processing. This is scheduled by sctp_rcv(). */
static void sctp_assoc_bh_rcv(struct work_struct *work)
{
struct sctp_association *asoc =
container_of(work, struct sctp_association,
base.inqueue.immediate);
struct net *net = sock_net(asoc->base.sk);
struct sctp_endpoint *ep;
struct sctp_chunk *chunk;
struct sctp_inq *inqueue;
int state;
sctp_subtype_t subtype;
int error = 0;
/* The association should be held so we should be safe. */
ep = asoc->ep;
inqueue = &asoc->base.inqueue;
sctp_association_hold(asoc);
while (NULL != (chunk = sctp_inq_pop(inqueue))) {
state = asoc->state;
subtype = SCTP_ST_CHUNK(chunk->chunk_hdr->type);
/* SCTP-AUTH, Section 6.3:
* The receiver has a list of chunk types which it expects
* to be received only after an AUTH-chunk. This list has
* been sent to the peer during the association setup. It
* MUST silently discard these chunks if they are not placed
* after an AUTH chunk in the packet.
*/
if (sctp_auth_recv_cid(subtype.chunk, asoc) && !chunk->auth)
continue;
/* Remember where the last DATA chunk came from so we
* know where to send the SACK.
*/
if (sctp_chunk_is_data(chunk))
asoc->peer.last_data_from = chunk->transport;
else {
SCTP_INC_STATS(net, SCTP_MIB_INCTRLCHUNKS);
asoc->stats.ictrlchunks++;
if (chunk->chunk_hdr->type == SCTP_CID_SACK)
asoc->stats.isacks++;
}
if (chunk->transport)
chunk->transport->last_time_heard = jiffies;
/* Run through the state machine. */
error = sctp_do_sm(net, SCTP_EVENT_T_CHUNK, subtype,
state, ep, asoc, chunk, GFP_ATOMIC);
/* Check to see if the association is freed in response to
* the incoming chunk. If so, get out of the while loop.
*/
if (asoc->base.dead)
break;
/* If there is an error on chunk, discard this packet. */
if (error && chunk)
chunk->pdiscard = 1;
}
sctp_association_put(asoc);
}
/* This routine moves an association from its old sk to a new sk. */
void sctp_assoc_migrate(struct sctp_association *assoc, struct sock *newsk)
{
struct sctp_sock *newsp = sctp_sk(newsk);
struct sock *oldsk = assoc->base.sk;
/* Delete the association from the old endpoint's list of
* associations.
*/
list_del_init(&assoc->asocs);
/* Decrement the backlog value for a TCP-style socket. */
if (sctp_style(oldsk, TCP))
oldsk->sk_ack_backlog--;
/* Release references to the old endpoint and the sock. */
sctp_endpoint_put(assoc->ep);
sock_put(assoc->base.sk);
/* Get a reference to the new endpoint. */
assoc->ep = newsp->ep;
sctp_endpoint_hold(assoc->ep);
/* Get a reference to the new sock. */
assoc->base.sk = newsk;
sock_hold(assoc->base.sk);
/* Add the association to the new endpoint's list of associations. */
sctp_endpoint_add_asoc(newsp->ep, assoc);
}
/* Update an association (possibly from unexpected COOKIE-ECHO processing). */
void sctp_assoc_update(struct sctp_association *asoc,
struct sctp_association *new)
{
struct sctp_transport *trans;
struct list_head *pos, *temp;
/* Copy in new parameters of peer. */
asoc->c = new->c;
asoc->peer.rwnd = new->peer.rwnd;
asoc->peer.sack_needed = new->peer.sack_needed;
asoc->peer.i = new->peer.i;
sctp_tsnmap_init(&asoc->peer.tsn_map, SCTP_TSN_MAP_INITIAL,
asoc->peer.i.initial_tsn, GFP_ATOMIC);
/* Remove any peer addresses not present in the new association. */
list_for_each_safe(pos, temp, &asoc->peer.transport_addr_list) {
trans = list_entry(pos, struct sctp_transport, transports);
if (!sctp_assoc_lookup_paddr(new, &trans->ipaddr)) {
sctp_assoc_rm_peer(asoc, trans);
continue;
}
if (asoc->state >= SCTP_STATE_ESTABLISHED)
sctp_transport_reset(trans);
}
/* If the case is A (association restart), use
* initial_tsn as next_tsn. If the case is B, use
* current next_tsn in case data sent to peer
* has been discarded and needs retransmission.
*/
if (asoc->state >= SCTP_STATE_ESTABLISHED) {
asoc->next_tsn = new->next_tsn;
asoc->ctsn_ack_point = new->ctsn_ack_point;
asoc->adv_peer_ack_point = new->adv_peer_ack_point;
/* Reinitialize SSN for both local streams
* and peer's streams.
*/
sctp_ssnmap_clear(asoc->ssnmap);
/* Flush the ULP reassembly and ordered queue.
* Any data there will now be stale and will
* cause problems.
*/
sctp_ulpq_flush(&asoc->ulpq);
/* reset the overall association error count so
* that the restarted association doesn't get torn
* down on the next retransmission timer.
*/
asoc->overall_error_count = 0;
} else {
/* Add any peer addresses from the new association. */
list_for_each_entry(trans, &new->peer.transport_addr_list,
transports) {
if (!sctp_assoc_lookup_paddr(asoc, &trans->ipaddr))
sctp_assoc_add_peer(asoc, &trans->ipaddr,
GFP_ATOMIC, trans->state);
}
asoc->ctsn_ack_point = asoc->next_tsn - 1;
asoc->adv_peer_ack_point = asoc->ctsn_ack_point;
if (!asoc->ssnmap) {
/* Move the ssnmap. */
asoc->ssnmap = new->ssnmap;
new->ssnmap = NULL;
}
if (!asoc->assoc_id) {
/* get a new association id since we don't have one
* yet.
*/
sctp_assoc_set_id(asoc, GFP_ATOMIC);
}
}
/* SCTP-AUTH: Save the peer parameters from the new assocaitions
* and also move the association shared keys over
*/
kfree(asoc->peer.peer_random);
asoc->peer.peer_random = new->peer.peer_random;
new->peer.peer_random = NULL;
kfree(asoc->peer.peer_chunks);
asoc->peer.peer_chunks = new->peer.peer_chunks;
new->peer.peer_chunks = NULL;
kfree(asoc->peer.peer_hmacs);
asoc->peer.peer_hmacs = new->peer.peer_hmacs;
new->peer.peer_hmacs = NULL;
sctp_auth_key_put(asoc->asoc_shared_key);
sctp_auth_asoc_init_active_key(asoc, GFP_ATOMIC);
}
/* Update the retran path for sending a retransmitted packet.
* Round-robin through the active transports, else round-robin
* through the inactive transports as this is the next best thing
* we can try.
*/
void sctp_assoc_update_retran_path(struct sctp_association *asoc)
{
struct sctp_transport *t, *next;
struct list_head *head = &asoc->peer.transport_addr_list;
struct list_head *pos;
if (asoc->peer.transport_count == 1)
return;
/* Find the next transport in a round-robin fashion. */
t = asoc->peer.retran_path;
pos = &t->transports;
next = NULL;
while (1) {
/* Skip the head. */
if (pos->next == head)
pos = head->next;
else
pos = pos->next;
t = list_entry(pos, struct sctp_transport, transports);
/* We have exhausted the list, but didn't find any
* other active transports. If so, use the next
* transport.
*/
if (t == asoc->peer.retran_path) {
t = next;
break;
}
/* Try to find an active transport. */
if ((t->state == SCTP_ACTIVE) ||
(t->state == SCTP_UNKNOWN)) {
break;
} else {
/* Keep track of the next transport in case
* we don't find any active transport.
*/
if (t->state != SCTP_UNCONFIRMED && !next)
next = t;
}
}
if (t)
asoc->peer.retran_path = t;
else
t = asoc->peer.retran_path;
SCTP_DEBUG_PRINTK_IPADDR("sctp_assoc_update_retran_path:association"
" %p addr: ",
" port: %d\n",
asoc,
(&t->ipaddr),
ntohs(t->ipaddr.v4.sin_port));
}
/* Choose the transport for sending retransmit packet. */
struct sctp_transport *sctp_assoc_choose_alter_transport(
struct sctp_association *asoc, struct sctp_transport *last_sent_to)
{
/* If this is the first time packet is sent, use the active path,
* else use the retran path. If the last packet was sent over the
* retran path, update the retran path and use it.
*/
if (!last_sent_to)
return asoc->peer.active_path;
else {
if (last_sent_to == asoc->peer.retran_path)
sctp_assoc_update_retran_path(asoc);
return asoc->peer.retran_path;
}
}
/* Update the association's pmtu and frag_point by going through all the
* transports. This routine is called when a transport's PMTU has changed.
*/
void sctp_assoc_sync_pmtu(struct sock *sk, struct sctp_association *asoc)
{
struct sctp_transport *t;
__u32 pmtu = 0;
if (!asoc)
return;
/* Get the lowest pmtu of all the transports. */
list_for_each_entry(t, &asoc->peer.transport_addr_list,
transports) {
if (t->pmtu_pending && t->dst) {
sctp_transport_update_pmtu(sk, t, dst_mtu(t->dst));
t->pmtu_pending = 0;
}
if (!pmtu || (t->pathmtu < pmtu))
pmtu = t->pathmtu;
}
if (pmtu) {
asoc->pathmtu = pmtu;
asoc->frag_point = sctp_frag_point(asoc, pmtu);
}
SCTP_DEBUG_PRINTK("%s: asoc:%p, pmtu:%d, frag_point:%d\n",
__func__, asoc, asoc->pathmtu, asoc->frag_point);
}
/* Should we send a SACK to update our peer? */
static inline int sctp_peer_needs_update(struct sctp_association *asoc)
{
struct net *net = sock_net(asoc->base.sk);
switch (asoc->state) {
case SCTP_STATE_ESTABLISHED:
case SCTP_STATE_SHUTDOWN_PENDING:
case SCTP_STATE_SHUTDOWN_RECEIVED:
case SCTP_STATE_SHUTDOWN_SENT:
if ((asoc->rwnd > asoc->a_rwnd) &&
((asoc->rwnd - asoc->a_rwnd) >= max_t(__u32,
(asoc->base.sk->sk_rcvbuf >> net->sctp.rwnd_upd_shift),
asoc->pathmtu)))
return 1;
break;
default:
break;
}
return 0;
}
/* Increase asoc's rwnd by len and send any window update SACK if needed. */
void sctp_assoc_rwnd_increase(struct sctp_association *asoc, unsigned int len)
{
struct sctp_chunk *sack;
struct timer_list *timer;
if (asoc->rwnd_over) {
if (asoc->rwnd_over >= len) {
asoc->rwnd_over -= len;
} else {
asoc->rwnd += (len - asoc->rwnd_over);
asoc->rwnd_over = 0;
}
} else {
asoc->rwnd += len;
}
/* If we had window pressure, start recovering it
* once our rwnd had reached the accumulated pressure
* threshold. The idea is to recover slowly, but up
* to the initial advertised window.
*/
if (asoc->rwnd_press && asoc->rwnd >= asoc->rwnd_press) {
int change = min(asoc->pathmtu, asoc->rwnd_press);
asoc->rwnd += change;
asoc->rwnd_press -= change;
}
SCTP_DEBUG_PRINTK("%s: asoc %p rwnd increased by %d to (%u, %u) "
"- %u\n", __func__, asoc, len, asoc->rwnd,
asoc->rwnd_over, asoc->a_rwnd);
/* Send a window update SACK if the rwnd has increased by at least the
* minimum of the association's PMTU and half of the receive buffer.
* The algorithm used is similar to the one described in
* Section 4.2.3.3 of RFC 1122.
*/
if (sctp_peer_needs_update(asoc)) {
asoc->a_rwnd = asoc->rwnd;
SCTP_DEBUG_PRINTK("%s: Sending window update SACK- asoc: %p "
"rwnd: %u a_rwnd: %u\n", __func__,
asoc, asoc->rwnd, asoc->a_rwnd);
sack = sctp_make_sack(asoc);
if (!sack)
return;
asoc->peer.sack_needed = 0;
sctp_outq_tail(&asoc->outqueue, sack);
/* Stop the SACK timer. */
timer = &asoc->timers[SCTP_EVENT_TIMEOUT_SACK];
if (del_timer(timer))
sctp_association_put(asoc);
}
}
/* Decrease asoc's rwnd by len. */
void sctp_assoc_rwnd_decrease(struct sctp_association *asoc, unsigned int len)
{
int rx_count;
int over = 0;
SCTP_ASSERT(asoc->rwnd, "rwnd zero", return);
SCTP_ASSERT(!asoc->rwnd_over, "rwnd_over not zero", return);
if (asoc->ep->rcvbuf_policy)
rx_count = atomic_read(&asoc->rmem_alloc);
else
rx_count = atomic_read(&asoc->base.sk->sk_rmem_alloc);
/* If we've reached or overflowed our receive buffer, announce
* a 0 rwnd if rwnd would still be positive. Store the
* the pottential pressure overflow so that the window can be restored
* back to original value.
*/
if (rx_count >= asoc->base.sk->sk_rcvbuf)
over = 1;
if (asoc->rwnd >= len) {
asoc->rwnd -= len;
if (over) {
asoc->rwnd_press += asoc->rwnd;
asoc->rwnd = 0;
}
} else {
asoc->rwnd_over = len - asoc->rwnd;
asoc->rwnd = 0;
}
SCTP_DEBUG_PRINTK("%s: asoc %p rwnd decreased by %d to (%u, %u, %u)\n",
__func__, asoc, len, asoc->rwnd,
asoc->rwnd_over, asoc->rwnd_press);
}
/* Build the bind address list for the association based on info from the
* local endpoint and the remote peer.
*/
int sctp_assoc_set_bind_addr_from_ep(struct sctp_association *asoc,
sctp_scope_t scope, gfp_t gfp)
{
int flags;
/* Use scoping rules to determine the subset of addresses from
* the endpoint.
*/
flags = (PF_INET6 == asoc->base.sk->sk_family) ? SCTP_ADDR6_ALLOWED : 0;
if (asoc->peer.ipv4_address)
flags |= SCTP_ADDR4_PEERSUPP;
if (asoc->peer.ipv6_address)
flags |= SCTP_ADDR6_PEERSUPP;
return sctp_bind_addr_copy(sock_net(asoc->base.sk),
&asoc->base.bind_addr,
&asoc->ep->base.bind_addr,
scope, gfp, flags);
}
/* Build the association's bind address list from the cookie. */
int sctp_assoc_set_bind_addr_from_cookie(struct sctp_association *asoc,
struct sctp_cookie *cookie,
gfp_t gfp)
{
int var_size2 = ntohs(cookie->peer_init->chunk_hdr.length);
int var_size3 = cookie->raw_addr_list_len;
__u8 *raw = (__u8 *)cookie->peer_init + var_size2;
return sctp_raw_to_bind_addrs(&asoc->base.bind_addr, raw, var_size3,
asoc->ep->base.bind_addr.port, gfp);
}
/* Lookup laddr in the bind address list of an association. */
int sctp_assoc_lookup_laddr(struct sctp_association *asoc,
const union sctp_addr *laddr)
{
int found = 0;
if ((asoc->base.bind_addr.port == ntohs(laddr->v4.sin_port)) &&
sctp_bind_addr_match(&asoc->base.bind_addr, laddr,
sctp_sk(asoc->base.sk)))
found = 1;
return found;
}
/* Set an association id for a given association */
int sctp_assoc_set_id(struct sctp_association *asoc, gfp_t gfp)
{
bool preload = gfp & __GFP_WAIT;
int ret;
/* If the id is already assigned, keep it. */
if (asoc->assoc_id)
return 0;
if (preload)
idr_preload(gfp);
spin_lock_bh(&sctp_assocs_id_lock);
/* 0 is not a valid assoc_id, must be >= 1 */
ret = idr_alloc_cyclic(&sctp_assocs_id, asoc, 1, 0, GFP_NOWAIT);
spin_unlock_bh(&sctp_assocs_id_lock);
if (preload)
idr_preload_end();
if (ret < 0)
return ret;
asoc->assoc_id = (sctp_assoc_t)ret;
return 0;
}
/* Free the ASCONF queue */
static void sctp_assoc_free_asconf_queue(struct sctp_association *asoc)
{
struct sctp_chunk *asconf;
struct sctp_chunk *tmp;
list_for_each_entry_safe(asconf, tmp, &asoc->addip_chunk_list, list) {
list_del_init(&asconf->list);
sctp_chunk_free(asconf);
}
}
/* Free asconf_ack cache */
static void sctp_assoc_free_asconf_acks(struct sctp_association *asoc)
{
struct sctp_chunk *ack;
struct sctp_chunk *tmp;
list_for_each_entry_safe(ack, tmp, &asoc->asconf_ack_list,
transmitted_list) {
list_del_init(&ack->transmitted_list);
sctp_chunk_free(ack);
}
}
/* Clean up the ASCONF_ACK queue */
void sctp_assoc_clean_asconf_ack_cache(const struct sctp_association *asoc)
{
struct sctp_chunk *ack;
struct sctp_chunk *tmp;
/* We can remove all the entries from the queue up to
* the "Peer-Sequence-Number".
*/
list_for_each_entry_safe(ack, tmp, &asoc->asconf_ack_list,
transmitted_list) {
if (ack->subh.addip_hdr->serial ==
htonl(asoc->peer.addip_serial))
break;
list_del_init(&ack->transmitted_list);
sctp_chunk_free(ack);
}
}
/* Find the ASCONF_ACK whose serial number matches ASCONF */
struct sctp_chunk *sctp_assoc_lookup_asconf_ack(
const struct sctp_association *asoc,
__be32 serial)
{
struct sctp_chunk *ack;
/* Walk through the list of cached ASCONF-ACKs and find the
* ack chunk whose serial number matches that of the request.
*/
list_for_each_entry(ack, &asoc->asconf_ack_list, transmitted_list) {
if (ack->subh.addip_hdr->serial == serial) {
sctp_chunk_hold(ack);
return ack;
}
}
return NULL;
}
void sctp_asconf_queue_teardown(struct sctp_association *asoc)
{
/* Free any cached ASCONF_ACK chunk. */
sctp_assoc_free_asconf_acks(asoc);
/* Free the ASCONF queue. */
sctp_assoc_free_asconf_queue(asoc);
/* Free any cached ASCONF chunk. */
if (asoc->addip_last_asconf)
sctp_chunk_free(asoc->addip_last_asconf);
}