1
linux/drivers/usb
David Brownell 4051770706 USB: atmel_usba_udc fixes, mostly disconnect()
Various fixes to Atmel's high speed UDC driver.

  * Issue some missing disconnect() calls.  Currently they are only made
    when VBUS power goes away (on boards where the driver can sense such
    changes), but that's not enough for gadget drivers to clean out all
    the state that's needed.  Missing calls were:

      - After USB reset, before starting enumeration.
      - When unregistering a gadget driver, before unbind().

  * Don't assume gadget drivers provide disconnect callbacks; make sure
    to not call through a null pointer!

  * When the driver doesn't provide an unbind() callback, refuse to
    unregister it.

Also remove two bogus "error" messages:

  * Related to mis-handling of disconnect() ... don't emit error messages
    for disconnect() handlers that disable endpoints.  All of them should
    be doing that; the problem is (unfixed) oddness in atmel_usba_udc.

  * Don't emit a diagnostic for a curious and transient nonfatal error
    that shows up sometimes with EP0.

Those messages spammed syslog, for no good reason.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-14 10:00:30 -07:00
..
atm USB: Remove redundant dependencies on USB_ATM. 2008-05-02 10:25:57 -07:00
c67x00 Fix c67x00-ll-hpi compilation failure (bug #10627) 2008-05-12 07:30:36 -07:00
class USB: add Zoom Telephonics Model 3095F V.92 USB Mini External modem to cdc-acm 2008-05-14 10:00:27 -07:00
core USB: create attributes before sending uevent 2008-05-14 10:00:26 -07:00
gadget USB: atmel_usba_udc fixes, mostly disconnect() 2008-05-14 10:00:30 -07:00
host usb: fix compile warning in isp1760 2008-05-14 10:00:28 -07:00
image usb: replace remaining __PRETTY_FUNCTION__ occurrences 2008-04-24 21:16:48 -07:00
misc usbtest: comment on why this code "expects" negative and positive errnos 2008-05-14 10:00:29 -07:00
mon usbmon: restore mmap 2008-04-24 21:16:43 -07:00
serial USB: option: add new Dell 5520 HSDPA variant 2008-05-14 10:00:29 -07:00
storage USB: unusual_devs: Add support for GI 0401 SD-Card interface 2008-05-14 10:00:29 -07:00
Kconfig USB: add support for SuperH OHCI 2008-02-01 14:35:03 -08:00
Makefile USB: add Cypress c67x00 OTG controller HCD driver 2008-05-02 10:25:57 -07:00
README
usb-skeleton.c USB: remove unnecessary type casting of urb->context 2008-04-24 21:16:55 -07:00

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.