1
linux/net/mac80211/ieee80211_rate.h
Johannes Berg 8318d78a44 cfg80211 API for channels/bitrates, mac80211 and driver conversion
This patch creates new cfg80211 wiphy API for channel and bitrate
registration and converts mac80211 and drivers to the new API. The
old mac80211 API is completely ripped out. All drivers (except ath5k)
are updated to the new API, in many cases I expect that optimisations
can be done.

Along with the regulatory code I've also ripped out the
IEEE80211_HW_DEFAULT_REG_DOMAIN_CONFIGURED flag, I believe it to be
unnecessary if the hardware simply gives us whatever channels it wants
to support and we then enable/disable them as required, which is pretty
much required for travelling.

Additionally, the patch adds proper "basic" rate handling for STA
mode interface, AP mode interface will have to have new API added
to allow userspace to set the basic rate set, currently it'll be
empty... However, the basic rate handling will need to be moved to
the BSS conf stuff.

I do expect there to be bugs in this, especially wrt. transmit
power handling where I'm basically clueless about how it should work.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29 15:19:32 -05:00

204 lines
5.5 KiB
C

/*
* Copyright 2002-2005, Instant802 Networks, Inc.
* Copyright 2005, Devicescape Software, Inc.
* Copyright (c) 2006 Jiri Benc <jbenc@suse.cz>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef IEEE80211_RATE_H
#define IEEE80211_RATE_H
#include <linux/netdevice.h>
#include <linux/skbuff.h>
#include <linux/types.h>
#include <net/mac80211.h>
#include "ieee80211_i.h"
#include "sta_info.h"
/* TODO: kdoc */
struct rate_selection {
/* Selected transmission rate */
struct ieee80211_rate *rate;
/* Non-ERP rate to use if mac80211 decides it cannot use an ERP rate */
struct ieee80211_rate *nonerp;
/* probe with this rate, or NULL for no probing */
struct ieee80211_rate *probe;
};
struct rate_control_ops {
struct module *module;
const char *name;
void (*tx_status)(void *priv, struct net_device *dev,
struct sk_buff *skb,
struct ieee80211_tx_status *status);
void (*get_rate)(void *priv, struct net_device *dev,
struct ieee80211_supported_band *band,
struct sk_buff *skb,
struct rate_selection *sel);
void (*rate_init)(void *priv, void *priv_sta,
struct ieee80211_local *local, struct sta_info *sta);
void (*clear)(void *priv);
void *(*alloc)(struct ieee80211_local *local);
void (*free)(void *priv);
void *(*alloc_sta)(void *priv, gfp_t gfp);
void (*free_sta)(void *priv, void *priv_sta);
int (*add_attrs)(void *priv, struct kobject *kobj);
void (*remove_attrs)(void *priv, struct kobject *kobj);
void (*add_sta_debugfs)(void *priv, void *priv_sta,
struct dentry *dir);
void (*remove_sta_debugfs)(void *priv, void *priv_sta);
};
struct rate_control_ref {
struct rate_control_ops *ops;
void *priv;
struct kref kref;
};
int ieee80211_rate_control_register(struct rate_control_ops *ops);
void ieee80211_rate_control_unregister(struct rate_control_ops *ops);
/* Get a reference to the rate control algorithm. If `name' is NULL, get the
* first available algorithm. */
struct rate_control_ref *rate_control_alloc(const char *name,
struct ieee80211_local *local);
void rate_control_get_rate(struct net_device *dev,
struct ieee80211_supported_band *sband,
struct sk_buff *skb,
struct rate_selection *sel);
struct rate_control_ref *rate_control_get(struct rate_control_ref *ref);
void rate_control_put(struct rate_control_ref *ref);
static inline void rate_control_tx_status(struct net_device *dev,
struct sk_buff *skb,
struct ieee80211_tx_status *status)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct rate_control_ref *ref = local->rate_ctrl;
ref->ops->tx_status(ref->priv, dev, skb, status);
}
static inline void rate_control_rate_init(struct sta_info *sta,
struct ieee80211_local *local)
{
struct rate_control_ref *ref = sta->rate_ctrl;
ref->ops->rate_init(ref->priv, sta->rate_ctrl_priv, local, sta);
}
static inline void rate_control_clear(struct ieee80211_local *local)
{
struct rate_control_ref *ref = local->rate_ctrl;
ref->ops->clear(ref->priv);
}
static inline void *rate_control_alloc_sta(struct rate_control_ref *ref,
gfp_t gfp)
{
return ref->ops->alloc_sta(ref->priv, gfp);
}
static inline void rate_control_free_sta(struct rate_control_ref *ref,
void *priv)
{
ref->ops->free_sta(ref->priv, priv);
}
static inline void rate_control_add_sta_debugfs(struct sta_info *sta)
{
#ifdef CONFIG_MAC80211_DEBUGFS
struct rate_control_ref *ref = sta->rate_ctrl;
if (sta->debugfs.dir && ref->ops->add_sta_debugfs)
ref->ops->add_sta_debugfs(ref->priv, sta->rate_ctrl_priv,
sta->debugfs.dir);
#endif
}
static inline void rate_control_remove_sta_debugfs(struct sta_info *sta)
{
#ifdef CONFIG_MAC80211_DEBUGFS
struct rate_control_ref *ref = sta->rate_ctrl;
if (ref->ops->remove_sta_debugfs)
ref->ops->remove_sta_debugfs(ref->priv, sta->rate_ctrl_priv);
#endif
}
static inline int rate_supported(struct sta_info *sta,
enum ieee80211_band band,
int index)
{
return (sta == NULL || sta->supp_rates[band] & BIT(index));
}
static inline int
rate_lowest_index(struct ieee80211_local *local,
struct ieee80211_supported_band *sband,
struct sta_info *sta)
{
int i;
for (i = 0; i < sband->n_bitrates; i++)
if (rate_supported(sta, sband->band, i))
return i;
/* warn when we cannot find a rate. */
WARN_ON(1);
return 0;
}
static inline struct ieee80211_rate *
rate_lowest(struct ieee80211_local *local,
struct ieee80211_supported_band *sband,
struct sta_info *sta)
{
return &sband->bitrates[rate_lowest_index(local, sband, sta)];
}
/* functions for rate control related to a device */
int ieee80211_init_rate_ctrl_alg(struct ieee80211_local *local,
const char *name);
void rate_control_deinitialize(struct ieee80211_local *local);
/* Rate control algorithms */
#if defined(RC80211_SIMPLE_COMPILE) || \
(defined(CONFIG_MAC80211_RC_SIMPLE) && \
!defined(CONFIG_MAC80211_RC_SIMPLE_MODULE))
extern int rc80211_simple_init(void);
extern void rc80211_simple_exit(void);
#else
static inline int rc80211_simple_init(void)
{
return 0;
}
static inline void rc80211_simple_exit(void)
{
}
#endif
#if defined(RC80211_PID_COMPILE) || \
(defined(CONFIG_MAC80211_RC_PID) && \
!defined(CONFIG_MAC80211_RC_PID_MODULE))
extern int rc80211_pid_init(void);
extern void rc80211_pid_exit(void);
#else
static inline int rc80211_pid_init(void)
{
return 0;
}
static inline void rc80211_pid_exit(void)
{
}
#endif
#endif /* IEEE80211_RATE_H */