17cf803a57
This updates the copyright notices of the new EMAC driver to avoid confusion as who is to be blamed for new bugs. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
362 lines
8.2 KiB
C
362 lines
8.2 KiB
C
/*
|
|
* drivers/net/ibm_newemac/core.h
|
|
*
|
|
* Driver for PowerPC 4xx on-chip ethernet controller.
|
|
*
|
|
* Copyright 2007 Benjamin Herrenschmidt, IBM Corp.
|
|
* <benh@kernel.crashing.org>
|
|
*
|
|
* Based on the arch/ppc version of the driver:
|
|
*
|
|
* Copyright (c) 2004, 2005 Zultys Technologies.
|
|
* Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
|
|
*
|
|
* Based on original work by
|
|
* Armin Kuster <akuster@mvista.com>
|
|
* Johnnie Peters <jpeters@mvista.com>
|
|
* Copyright 2000, 2001 MontaVista Softare Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
*/
|
|
#ifndef __IBM_NEWEMAC_CORE_H
|
|
#define __IBM_NEWEMAC_CORE_H
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/list.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/spinlock.h>
|
|
|
|
#include <asm/of_platform.h>
|
|
#include <asm/io.h>
|
|
#include <asm/dcr.h>
|
|
|
|
#include "emac.h"
|
|
#include "phy.h"
|
|
#include "zmii.h"
|
|
#include "rgmii.h"
|
|
#include "mal.h"
|
|
#include "tah.h"
|
|
#include "debug.h"
|
|
|
|
#define NUM_TX_BUFF CONFIG_IBM_NEW_EMAC_TXB
|
|
#define NUM_RX_BUFF CONFIG_IBM_NEW_EMAC_RXB
|
|
|
|
/* Simple sanity check */
|
|
#if NUM_TX_BUFF > 256 || NUM_RX_BUFF > 256
|
|
#error Invalid number of buffer descriptors (greater than 256)
|
|
#endif
|
|
|
|
#define EMAC_MIN_MTU 46
|
|
|
|
/* Maximum L2 header length (VLAN tagged, no FCS) */
|
|
#define EMAC_MTU_OVERHEAD (6 * 2 + 2 + 4)
|
|
|
|
/* RX BD size for the given MTU */
|
|
static inline int emac_rx_size(int mtu)
|
|
{
|
|
if (mtu > ETH_DATA_LEN)
|
|
return MAL_MAX_RX_SIZE;
|
|
else
|
|
return mal_rx_size(ETH_DATA_LEN + EMAC_MTU_OVERHEAD);
|
|
}
|
|
|
|
#define EMAC_DMA_ALIGN(x) ALIGN((x), dma_get_cache_alignment())
|
|
|
|
#define EMAC_RX_SKB_HEADROOM \
|
|
EMAC_DMA_ALIGN(CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM)
|
|
|
|
/* Size of RX skb for the given MTU */
|
|
static inline int emac_rx_skb_size(int mtu)
|
|
{
|
|
int size = max(mtu + EMAC_MTU_OVERHEAD, emac_rx_size(mtu));
|
|
return EMAC_DMA_ALIGN(size + 2) + EMAC_RX_SKB_HEADROOM;
|
|
}
|
|
|
|
/* RX DMA sync size */
|
|
static inline int emac_rx_sync_size(int mtu)
|
|
{
|
|
return EMAC_DMA_ALIGN(emac_rx_size(mtu) + 2);
|
|
}
|
|
|
|
/* Driver statistcs is split into two parts to make it more cache friendly:
|
|
* - normal statistics (packet count, etc)
|
|
* - error statistics
|
|
*
|
|
* When statistics is requested by ethtool, these parts are concatenated,
|
|
* normal one goes first.
|
|
*
|
|
* Please, keep these structures in sync with emac_stats_keys.
|
|
*/
|
|
|
|
/* Normal TX/RX Statistics */
|
|
struct emac_stats {
|
|
u64 rx_packets;
|
|
u64 rx_bytes;
|
|
u64 tx_packets;
|
|
u64 tx_bytes;
|
|
u64 rx_packets_csum;
|
|
u64 tx_packets_csum;
|
|
};
|
|
|
|
/* Error statistics */
|
|
struct emac_error_stats {
|
|
u64 tx_undo;
|
|
|
|
/* Software RX Errors */
|
|
u64 rx_dropped_stack;
|
|
u64 rx_dropped_oom;
|
|
u64 rx_dropped_error;
|
|
u64 rx_dropped_resize;
|
|
u64 rx_dropped_mtu;
|
|
u64 rx_stopped;
|
|
/* BD reported RX errors */
|
|
u64 rx_bd_errors;
|
|
u64 rx_bd_overrun;
|
|
u64 rx_bd_bad_packet;
|
|
u64 rx_bd_runt_packet;
|
|
u64 rx_bd_short_event;
|
|
u64 rx_bd_alignment_error;
|
|
u64 rx_bd_bad_fcs;
|
|
u64 rx_bd_packet_too_long;
|
|
u64 rx_bd_out_of_range;
|
|
u64 rx_bd_in_range;
|
|
/* EMAC IRQ reported RX errors */
|
|
u64 rx_parity;
|
|
u64 rx_fifo_overrun;
|
|
u64 rx_overrun;
|
|
u64 rx_bad_packet;
|
|
u64 rx_runt_packet;
|
|
u64 rx_short_event;
|
|
u64 rx_alignment_error;
|
|
u64 rx_bad_fcs;
|
|
u64 rx_packet_too_long;
|
|
u64 rx_out_of_range;
|
|
u64 rx_in_range;
|
|
|
|
/* Software TX Errors */
|
|
u64 tx_dropped;
|
|
/* BD reported TX errors */
|
|
u64 tx_bd_errors;
|
|
u64 tx_bd_bad_fcs;
|
|
u64 tx_bd_carrier_loss;
|
|
u64 tx_bd_excessive_deferral;
|
|
u64 tx_bd_excessive_collisions;
|
|
u64 tx_bd_late_collision;
|
|
u64 tx_bd_multple_collisions;
|
|
u64 tx_bd_single_collision;
|
|
u64 tx_bd_underrun;
|
|
u64 tx_bd_sqe;
|
|
/* EMAC IRQ reported TX errors */
|
|
u64 tx_parity;
|
|
u64 tx_underrun;
|
|
u64 tx_sqe;
|
|
u64 tx_errors;
|
|
};
|
|
|
|
#define EMAC_ETHTOOL_STATS_COUNT ((sizeof(struct emac_stats) + \
|
|
sizeof(struct emac_error_stats)) \
|
|
/ sizeof(u64))
|
|
|
|
struct emac_instance {
|
|
struct net_device *ndev;
|
|
struct resource rsrc_regs;
|
|
struct emac_regs __iomem *emacp;
|
|
struct of_device *ofdev;
|
|
struct device_node **blist; /* bootlist entry */
|
|
|
|
/* MAL linkage */
|
|
u32 mal_ph;
|
|
struct of_device *mal_dev;
|
|
u32 mal_rx_chan;
|
|
u32 mal_tx_chan;
|
|
struct mal_instance *mal;
|
|
struct mal_commac commac;
|
|
|
|
/* PHY infos */
|
|
u32 phy_mode;
|
|
u32 phy_map;
|
|
u32 phy_address;
|
|
u32 phy_feat_exc;
|
|
struct mii_phy phy;
|
|
struct mutex link_lock;
|
|
struct delayed_work link_work;
|
|
int link_polling;
|
|
|
|
/* Shared MDIO if any */
|
|
u32 mdio_ph;
|
|
struct of_device *mdio_dev;
|
|
struct emac_instance *mdio_instance;
|
|
struct mutex mdio_lock;
|
|
|
|
/* ZMII infos if any */
|
|
u32 zmii_ph;
|
|
u32 zmii_port;
|
|
struct of_device *zmii_dev;
|
|
|
|
/* RGMII infos if any */
|
|
u32 rgmii_ph;
|
|
u32 rgmii_port;
|
|
struct of_device *rgmii_dev;
|
|
|
|
/* TAH infos if any */
|
|
u32 tah_ph;
|
|
u32 tah_port;
|
|
struct of_device *tah_dev;
|
|
|
|
/* IRQs */
|
|
int wol_irq;
|
|
int emac_irq;
|
|
|
|
/* OPB bus frequency in Mhz */
|
|
u32 opb_bus_freq;
|
|
|
|
/* Cell index within an ASIC (for clk mgmnt) */
|
|
u32 cell_index;
|
|
|
|
/* Max supported MTU */
|
|
u32 max_mtu;
|
|
|
|
/* Feature bits (from probe table) */
|
|
unsigned int features;
|
|
|
|
/* Tx and Rx fifo sizes & other infos in bytes */
|
|
u32 tx_fifo_size;
|
|
u32 tx_fifo_size_gige;
|
|
u32 rx_fifo_size;
|
|
u32 rx_fifo_size_gige;
|
|
u32 fifo_entry_size;
|
|
u32 mal_burst_size; /* move to MAL ? */
|
|
|
|
/* Descriptor management
|
|
*/
|
|
struct mal_descriptor *tx_desc;
|
|
int tx_cnt;
|
|
int tx_slot;
|
|
int ack_slot;
|
|
|
|
struct mal_descriptor *rx_desc;
|
|
int rx_slot;
|
|
struct sk_buff *rx_sg_skb; /* 1 */
|
|
int rx_skb_size;
|
|
int rx_sync_size;
|
|
|
|
struct sk_buff *tx_skb[NUM_TX_BUFF];
|
|
struct sk_buff *rx_skb[NUM_RX_BUFF];
|
|
|
|
/* Stats
|
|
*/
|
|
struct emac_error_stats estats;
|
|
struct net_device_stats nstats;
|
|
struct emac_stats stats;
|
|
|
|
/* Misc
|
|
*/
|
|
int reset_failed;
|
|
int stop_timeout; /* in us */
|
|
int no_mcast;
|
|
int mcast_pending;
|
|
int opened;
|
|
struct work_struct reset_work;
|
|
spinlock_t lock;
|
|
};
|
|
|
|
/*
|
|
* Features of various EMAC implementations
|
|
*/
|
|
|
|
/*
|
|
* No flow control on 40x according to the original driver
|
|
*/
|
|
#define EMAC_FTR_NO_FLOW_CONTROL_40x 0x00000001
|
|
/*
|
|
* Cell is an EMAC4
|
|
*/
|
|
#define EMAC_FTR_EMAC4 0x00000002
|
|
/*
|
|
* For the 440SPe, AMCC inexplicably changed the polarity of
|
|
* the "operation complete" bit in the MII control register.
|
|
*/
|
|
#define EMAC_FTR_STACR_OC_INVERT 0x00000004
|
|
/*
|
|
* Set if we have a TAH.
|
|
*/
|
|
#define EMAC_FTR_HAS_TAH 0x00000008
|
|
/*
|
|
* Set if we have a ZMII.
|
|
*/
|
|
#define EMAC_FTR_HAS_ZMII 0x00000010
|
|
/*
|
|
* Set if we have a RGMII.
|
|
*/
|
|
#define EMAC_FTR_HAS_RGMII 0x00000020
|
|
/*
|
|
* Set if we have new type STACR with STAOPC
|
|
*/
|
|
#define EMAC_FTR_HAS_NEW_STACR 0x00000040
|
|
|
|
|
|
/* Right now, we don't quite handle the always/possible masks on the
|
|
* most optimal way as we don't have a way to say something like
|
|
* always EMAC4. Patches welcome.
|
|
*/
|
|
enum {
|
|
EMAC_FTRS_ALWAYS = 0,
|
|
|
|
EMAC_FTRS_POSSIBLE =
|
|
#ifdef CONFIG_IBM_NEW_EMAC_EMAC4
|
|
EMAC_FTR_EMAC4 | EMAC_FTR_HAS_NEW_STACR |
|
|
EMAC_FTR_STACR_OC_INVERT |
|
|
#endif
|
|
#ifdef CONFIG_IBM_NEW_EMAC_TAH
|
|
EMAC_FTR_HAS_TAH |
|
|
#endif
|
|
#ifdef CONFIG_IBM_NEW_EMAC_ZMII
|
|
EMAC_FTR_HAS_ZMII |
|
|
#endif
|
|
#ifdef CONFIG_IBM_NEW_EMAC_RGMII
|
|
EMAC_FTR_HAS_RGMII |
|
|
#endif
|
|
0,
|
|
};
|
|
|
|
static inline int emac_has_feature(struct emac_instance *dev,
|
|
unsigned long feature)
|
|
{
|
|
return (EMAC_FTRS_ALWAYS & feature) ||
|
|
(EMAC_FTRS_POSSIBLE & dev->features & feature);
|
|
}
|
|
|
|
|
|
/* Ethtool get_regs complex data.
|
|
* We want to get not just EMAC registers, but also MAL, ZMII, RGMII, TAH
|
|
* when available.
|
|
*
|
|
* Returned BLOB consists of the ibm_emac_ethtool_regs_hdr,
|
|
* MAL registers, EMAC registers and optional ZMII, RGMII, TAH registers.
|
|
* Each register component is preceded with emac_ethtool_regs_subhdr.
|
|
* Order of the optional headers follows their relative bit posititions
|
|
* in emac_ethtool_regs_hdr.components
|
|
*/
|
|
#define EMAC_ETHTOOL_REGS_ZMII 0x00000001
|
|
#define EMAC_ETHTOOL_REGS_RGMII 0x00000002
|
|
#define EMAC_ETHTOOL_REGS_TAH 0x00000004
|
|
|
|
struct emac_ethtool_regs_hdr {
|
|
u32 components;
|
|
};
|
|
|
|
struct emac_ethtool_regs_subhdr {
|
|
u32 version;
|
|
u32 index;
|
|
};
|
|
|
|
#endif /* __IBM_NEWEMAC_CORE_H */
|