kevin/linux
1
Fork 0
Code
69458cb194
linux/arch/powerpc/boot/dts/mpc8641_hpcn.dts
Kumar Gala b1b6802586 powerpc/fsl: Removed reg property from 85xx/86xx soc node 
Between the addition of the ecm/mcm law nodes and the fact that the
get_immrbase() has been using the range property of the SoC to determine
the base address of CCSR space we no longer need the reg property at
the soc node level.  It has been ill specified and varied between device
trees to cover either the {e,m}cm-law node, some odd subset of CCSR
space or all of CCSR space.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19 00:50:29 -05:00

629 lines
14 KiB
Plaintext
Raw Blame History

/*
* MPC8641 HPCN Device Tree Source
*
* Copyright 2006 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/dts-v1/;
/ {
model = "MPC8641HPCN";
compatible = "fsl,mpc8641hpcn";
#address-cells = <1>;
#size-cells = <1>;
aliases {
ethernet0 = &enet0;
ethernet1 = &enet1;
ethernet2 = &enet2;
ethernet3 = &enet3;
serial0 = &serial0;
serial1 = &serial1;
pci0 = &pci0;
pci1 = &pci1;
/*
* Only one of Rapid IO or PCI can be present due to HW limitations and
* due to the fact that the 2 now share address space in the new memory
* map. The most likely case is that we have PCI, so comment out the
* rapidio node. Leave it here for reference.
*/
/* rapidio0 = &rapidio0; */
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
PowerPC,8641@0 {
device_type = "cpu";
reg = <0>;
d-cache-line-size = <32>;
i-cache-line-size = <32>;
d-cache-size = <32768>; // L1
i-cache-size = <32768>; // L1
timebase-frequency = <0>; // From uboot
bus-frequency = <0>; // From uboot
clock-frequency = <0>; // From uboot
};
PowerPC,8641@1 {
device_type = "cpu";
reg = <1>;
d-cache-line-size = <32>;
i-cache-line-size = <32>;
d-cache-size = <32768>;
i-cache-size = <32768>;
timebase-frequency = <0>; // From uboot
bus-frequency = <0>; // From uboot
clock-frequency = <0>; // From uboot
};
};
memory {
device_type = "memory";
reg = <0x00000000 0x40000000>; // 1G at 0x0
};
localbus@ffe05000 {
#address-cells = <2>;
#size-cells = <1>;
compatible = "fsl,mpc8641-localbus", "simple-bus";
reg = <0xffe05000 0x1000>;
interrupts = <19 2>;
interrupt-parent = <&mpic>;
ranges = <0 0 0xef800000 0x00800000
2 0 0xffdf8000 0x00008000
3 0 0xffdf0000 0x00008000>;
flash@0,0 {
compatible = "cfi-flash";
reg = <0 0 0x00800000>;
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "kernel";
reg = <0x00000000 0x00300000>;
};
partition@300000 {
label = "firmware b";
reg = <0x00300000 0x00100000>;
read-only;
};
partition@400000 {
label = "fs";
reg = <0x00400000 0x00300000>;
};
partition@700000 {
label = "firmware a";
reg = <0x00700000 0x00100000>;
read-only;
};
};
};
soc8641@ffe00000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
compatible = "simple-bus";
ranges = <0x00000000 0xffe00000 0x00100000>;
bus-frequency = <0>;
mcm-law@0 {
compatible = "fsl,mcm-law";
reg = <0x0 0x1000>;
fsl,num-laws = <10>;
};
mcm@1000 {
compatible = "fsl,mpc8641-mcm", "fsl,mcm";
reg = <0x1000 0x1000>;
interrupts = <17 2>;
interrupt-parent = <&mpic>;
};
i2c@3000 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <0>;
compatible = "fsl-i2c";
reg = <0x3000 0x100>;
interrupts = <43 2>;
interrupt-parent = <&mpic>;
dfsrr;
};
i2c@3100 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <1>;
compatible = "fsl-i2c";
reg = <0x3100 0x100>;
interrupts = <43 2>;
interrupt-parent = <&mpic>;
dfsrr;
};
dma@21300 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma";
reg = <0x21300 0x4>;
ranges = <0x0 0x21100 0x200>;
cell-index = <0>;
dma-channel@0 {
compatible = "fsl,mpc8641-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x0 0x80>;
cell-index = <0>;
interrupt-parent = <&mpic>;
interrupts = <20 2>;
};
dma-channel@80 {
compatible = "fsl,mpc8641-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x80 0x80>;
cell-index = <1>;
interrupt-parent = <&mpic>;
interrupts = <21 2>;
};
dma-channel@100 {
compatible = "fsl,mpc8641-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x100 0x80>;
cell-index = <2>;
interrupt-parent = <&mpic>;
interrupts = <22 2>;
};
dma-channel@180 {
compatible = "fsl,mpc8641-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x180 0x80>;
cell-index = <3>;
interrupt-parent = <&mpic>;
interrupts = <23 2>;
};
};
enet0: ethernet@24000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x520 0x20>;
phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <10 1>;
reg = <0>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <10 1>;
reg = <1>;
device_type = "ethernet-phy";
};
phy2: ethernet-phy@2 {
interrupt-parent = <&mpic>;
interrupts = <10 1>;
reg = <2>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupt-parent = <&mpic>;
interrupts = <10 1>;
reg = <3>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
};
enet1: ethernet@25000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
};
enet2: ethernet@26000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <2>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x26000 0x1000>;
ranges = <0x0 0x26000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <31 2 32 2 33 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi2>;
phy-handle = <&phy2>;
phy-connection-type = "rgmii-id";
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x520 0x20>;
tbi2: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
};
enet3: ethernet@27000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <3>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x27000 0x1000>;
ranges = <0x0 0x27000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <37 2 38 2 39 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi3>;
phy-handle = <&phy3>;
phy-connection-type = "rgmii-id";
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x520 0x20>;
tbi3: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
};
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
compatible = "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
interrupts = <42 2>;
interrupt-parent = <&mpic>;
};
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
compatible = "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
interrupts = <28 2>;
interrupt-parent = <&mpic>;
};
mpic: pic@40000 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
reg = <0x40000 0x40000>;
compatible = "chrp,open-pic";
device_type = "open-pic";
};
global-utilities@e0000 {
compatible = "fsl,mpc8641-guts";
reg = <0xe0000 0x1000>;
fsl,has-rstcr;
};
};
pci0: pcie@ffe08000 {
compatible = "fsl,mpc8641-pcie";
device_type = "pci";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <0xffe08000 0x1000>;
bus-range = <0x0 0xff>;
ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x20000000
0x01000000 0x0 0x00000000 0xffc00000 0x0 0x00010000>;
clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
interrupts = <24 2>;
interrupt-map-mask = <0xff00 0 0 7>;
interrupt-map = <
/* IDSEL 0x11 func 0 - PCI slot 1 */
0x8800 0 0 1 &mpic 2 1
0x8800 0 0 2 &mpic 3 1
0x8800 0 0 3 &mpic 4 1
0x8800 0 0 4 &mpic 1 1
/* IDSEL 0x11 func 1 - PCI slot 1 */
0x8900 0 0 1 &mpic 2 1
0x8900 0 0 2 &mpic 3 1
0x8900 0 0 3 &mpic 4 1
0x8900 0 0 4 &mpic 1 1
/* IDSEL 0x11 func 2 - PCI slot 1 */
0x8a00 0 0 1 &mpic 2 1
0x8a00 0 0 2 &mpic 3 1
0x8a00 0 0 3 &mpic 4 1
0x8a00 0 0 4 &mpic 1 1
/* IDSEL 0x11 func 3 - PCI slot 1 */
0x8b00 0 0 1 &mpic 2 1
0x8b00 0 0 2 &mpic 3 1
0x8b00 0 0 3 &mpic 4 1
0x8b00 0 0 4 &mpic 1 1
/* IDSEL 0x11 func 4 - PCI slot 1 */
0x8c00 0 0 1 &mpic 2 1
0x8c00 0 0 2 &mpic 3 1
0x8c00 0 0 3 &mpic 4 1
0x8c00 0 0 4 &mpic 1 1
/* IDSEL 0x11 func 5 - PCI slot 1 */
0x8d00 0 0 1 &mpic 2 1
0x8d00 0 0 2 &mpic 3 1
0x8d00 0 0 3 &mpic 4 1
0x8d00 0 0 4 &mpic 1 1
/* IDSEL 0x11 func 6 - PCI slot 1 */
0x8e00 0 0 1 &mpic 2 1
0x8e00 0 0 2 &mpic 3 1
0x8e00 0 0 3 &mpic 4 1
0x8e00 0 0 4 &mpic 1 1
/* IDSEL 0x11 func 7 - PCI slot 1 */
0x8f00 0 0 1 &mpic 2 1
0x8f00 0 0 2 &mpic 3 1
0x8f00 0 0 3 &mpic 4 1
0x8f00 0 0 4 &mpic 1 1
/* IDSEL 0x12 func 0 - PCI slot 2 */
0x9000 0 0 1 &mpic 3 1
0x9000 0 0 2 &mpic 4 1
0x9000 0 0 3 &mpic 1 1
0x9000 0 0 4 &mpic 2 1
/* IDSEL 0x12 func 1 - PCI slot 2 */
0x9100 0 0 1 &mpic 3 1
0x9100 0 0 2 &mpic 4 1
0x9100 0 0 3 &mpic 1 1
0x9100 0 0 4 &mpic 2 1
/* IDSEL 0x12 func 2 - PCI slot 2 */
0x9200 0 0 1 &mpic 3 1
0x9200 0 0 2 &mpic 4 1
0x9200 0 0 3 &mpic 1 1
0x9200 0 0 4 &mpic 2 1
/* IDSEL 0x12 func 3 - PCI slot 2 */
0x9300 0 0 1 &mpic 3 1
0x9300 0 0 2 &mpic 4 1
0x9300 0 0 3 &mpic 1 1
0x9300 0 0 4 &mpic 2 1
/* IDSEL 0x12 func 4 - PCI slot 2 */
0x9400 0 0 1 &mpic 3 1
0x9400 0 0 2 &mpic 4 1
0x9400 0 0 3 &mpic 1 1
0x9400 0 0 4 &mpic 2 1
/* IDSEL 0x12 func 5 - PCI slot 2 */
0x9500 0 0 1 &mpic 3 1
0x9500 0 0 2 &mpic 4 1
0x9500 0 0 3 &mpic 1 1
0x9500 0 0 4 &mpic 2 1
/* IDSEL 0x12 func 6 - PCI slot 2 */
0x9600 0 0 1 &mpic 3 1
0x9600 0 0 2 &mpic 4 1
0x9600 0 0 3 &mpic 1 1
0x9600 0 0 4 &mpic 2 1
/* IDSEL 0x12 func 7 - PCI slot 2 */
0x9700 0 0 1 &mpic 3 1
0x9700 0 0 2 &mpic 4 1
0x9700 0 0 3 &mpic 1 1
0x9700 0 0 4 &mpic 2 1
// IDSEL 0x1c USB
0xe000 0 0 1 &i8259 12 2
0xe100 0 0 2 &i8259 9 2
0xe200 0 0 3 &i8259 10 2
0xe300 0 0 4 &i8259 11 2
// IDSEL 0x1d Audio
0xe800 0 0 1 &i8259 6 2
// IDSEL 0x1e Legacy
0xf000 0 0 1 &i8259 7 2
0xf100 0 0 1 &i8259 7 2
// IDSEL 0x1f IDE/SATA
0xf800 0 0 1 &i8259 14 2
0xf900 0 0 1 &i8259 5 2
>;
pcie@0 {
reg = <0 0 0 0 0>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
ranges = <0x02000000 0x0 0x80000000
0x02000000 0x0 0x80000000
0x0 0x20000000
0x01000000 0x0 0x00000000
0x01000000 0x0 0x00000000
0x0 0x00010000>;
uli1575@0 {
reg = <0 0 0 0 0>;
#size-cells = <2>;
#address-cells = <3>;
ranges = <0x02000000 0x0 0x80000000
0x02000000 0x0 0x80000000
0x0 0x20000000
0x01000000 0x0 0x00000000
0x01000000 0x0 0x00000000
0x0 0x00010000>;
isa@1e {
device_type = "isa";
#interrupt-cells = <2>;
#size-cells = <1>;
#address-cells = <2>;
reg = <0xf000 0 0 0 0>;
ranges = <1 0 0x01000000 0 0
0x00001000>;
interrupt-parent = <&i8259>;
i8259: interrupt-controller@20 {
reg = <1 0x20 2
1 0xa0 2
1 0x4d0 2>;
interrupt-controller;
device_type = "interrupt-controller";
#address-cells = <0>;
#interrupt-cells = <2>;
compatible = "chrp,iic";
interrupts = <9 2>;
interrupt-parent = <&mpic>;
};
i8042@60 {
#size-cells = <0>;
#address-cells = <1>;
reg = <1 0x60 1 1 0x64 1>;
interrupts = <1 3 12 3>;
interrupt-parent =
<&i8259>;
keyboard@0 {
reg = <0>;
compatible = "pnpPNP,303";
};
mouse@1 {
reg = <1>;
compatible = "pnpPNP,f03";
};
};
rtc@70 {
compatible =
"pnpPNP,b00";
reg = <1 0x70 2>;
};
gpio@400 {
reg = <1 0x400 0x80>;
};
};
};
};
};
pci1: pcie@ffe09000 {
compatible = "fsl,mpc8641-pcie";
device_type = "pci";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <0xffe09000 0x1000>;
bus-range = <0 0xff>;
ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
0x01000000 0x0 0x00000000 0xffc10000 0x0 0x00010000>;
clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
interrupts = <25 2>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0x0000 0 0 1 &mpic 4 1
0x0000 0 0 2 &mpic 5 1
0x0000 0 0 3 &mpic 6 1
0x0000 0 0 4 &mpic 7 1
>;
pcie@0 {
reg = <0 0 0 0 0>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
ranges = <0x02000000 0x0 0xa0000000
0x02000000 0x0 0xa0000000
0x0 0x20000000
0x01000000 0x0 0x00000000
0x01000000 0x0 0x00000000
0x0 0x00010000>;
};
};
/*
rapidio0: rapidio@ffec0000 {
#address-cells = <2>;
#size-cells = <2>;
compatible = "fsl,rapidio-delta";
reg = <0xffec0000 0x20000>;
ranges = <0 0 0x80000000 0 0x20000000>;
interrupt-parent = <&mpic>;
// err_irq bell_outb_irq bell_inb_irq
// msg1_tx_irq msg1_rx_irq msg2_tx_irq msg2_rx_irq
interrupts = <48 2 49 2 50 2 53 2 54 2 55 2 56 2>;
};
*/
};
View Git Blame Copy Permalink