kevin/linux
1
Fork 0
Code
67797763c6
linux/drivers/net/sfc/mdio_10g.c
Steve Hodgson 67797763c6 sfc: Test for PHYXS faults whenever we cannot test link state bits 
Depending on the loopback mode, there may be no pertinent link state
bits.  In this case we test the PHYXS RX fault bit instead.  Make
sure to do this in all cases where there are no link state bits.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-30 14:06:31 -08:00

586 lines
16 KiB
C
Raw Blame History

/****************************************************************************
* Driver for Solarflare Solarstorm network controllers and boards
* Copyright 2006-2008 Solarflare Communications Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation, incorporated herein by reference.
*/
/*
* Useful functions for working with MDIO clause 45 PHYs
*/
#include <linux/types.h>
#include <linux/ethtool.h>
#include <linux/delay.h>
#include "net_driver.h"
#include "mdio_10g.h"
#include "boards.h"
#include "workarounds.h"
int mdio_clause45_reset_mmd(struct efx_nic *port, int mmd,
int spins, int spintime)
{
u32 ctrl;
int phy_id = port->mii.phy_id;
/* Catch callers passing values in the wrong units (or just silly) */
EFX_BUG_ON_PARANOID(spins * spintime >= 5000);
mdio_clause45_write(port, phy_id, mmd, MDIO_MMDREG_CTRL1,
(1 << MDIO_MMDREG_CTRL1_RESET_LBN));
/* Wait for the reset bit to clear. */
do {
msleep(spintime);
ctrl = mdio_clause45_read(port, phy_id, mmd, MDIO_MMDREG_CTRL1);
spins--;
} while (spins && (ctrl & (1 << MDIO_MMDREG_CTRL1_RESET_LBN)));
return spins ? spins : -ETIMEDOUT;
}
static int mdio_clause45_check_mmd(struct efx_nic *efx, int mmd,
int fault_fatal)
{
int status;
int phy_id = efx->mii.phy_id;
if (LOOPBACK_INTERNAL(efx))
return 0;
if (mmd != MDIO_MMD_AN) {
/* Read MMD STATUS2 to check it is responding. */
status = mdio_clause45_read(efx, phy_id, mmd,
MDIO_MMDREG_STAT2);
if (((status >> MDIO_MMDREG_STAT2_PRESENT_LBN) &
((1 << MDIO_MMDREG_STAT2_PRESENT_WIDTH) - 1)) !=
MDIO_MMDREG_STAT2_PRESENT_VAL) {
EFX_ERR(efx, "PHY MMD %d not responding.\n", mmd);
return -EIO;
}
}
/* Read MMD STATUS 1 to check for fault. */
status = mdio_clause45_read(efx, phy_id, mmd, MDIO_MMDREG_STAT1);
if ((status & (1 << MDIO_MMDREG_STAT1_FAULT_LBN)) != 0) {
if (fault_fatal) {
EFX_ERR(efx, "PHY MMD %d reporting fatal"
" fault: status %x\n", mmd, status);
return -EIO;
} else {
EFX_LOG(efx, "PHY MMD %d reporting status"
" %x (expected)\n", mmd, status);
}
}
return 0;
}
/* This ought to be ridiculous overkill. We expect it to fail rarely */
#define MDIO45_RESET_TIME 1000 /* ms */
#define MDIO45_RESET_ITERS 100
int mdio_clause45_wait_reset_mmds(struct efx_nic *efx,
unsigned int mmd_mask)
{
const int spintime = MDIO45_RESET_TIME / MDIO45_RESET_ITERS;
int tries = MDIO45_RESET_ITERS;
int rc = 0;
int in_reset;
while (tries) {
int mask = mmd_mask;
int mmd = 0;
int stat;
in_reset = 0;
while (mask) {
if (mask & 1) {
stat = mdio_clause45_read(efx,
efx->mii.phy_id,
mmd,
MDIO_MMDREG_CTRL1);
if (stat < 0) {
EFX_ERR(efx, "failed to read status of"
" MMD %d\n", mmd);
return -EIO;
}
if (stat & (1 << MDIO_MMDREG_CTRL1_RESET_LBN))
in_reset |= (1 << mmd);
}
mask = mask >> 1;
mmd++;
}
if (!in_reset)
break;
tries--;
msleep(spintime);
}
if (in_reset != 0) {
EFX_ERR(efx, "not all MMDs came out of reset in time."
" MMDs still in reset: %x\n", in_reset);
rc = -ETIMEDOUT;
}
return rc;
}
int mdio_clause45_check_mmds(struct efx_nic *efx,
unsigned int mmd_mask, unsigned int fatal_mask)
{
u32 devices;
int mmd = 0, probe_mmd;
/* Historically we have probed the PHYXS to find out what devices are
* present,but that doesn't work so well if the PHYXS isn't expected
* to exist, if so just find the first item in the list supplied. */
probe_mmd = (mmd_mask & MDIO_MMDREG_DEVS_PHYXS) ? MDIO_MMD_PHYXS :
__ffs(mmd_mask);
devices = (mdio_clause45_read(efx, efx->mii.phy_id,
probe_mmd, MDIO_MMDREG_DEVS0) |
mdio_clause45_read(efx, efx->mii.phy_id,
probe_mmd, MDIO_MMDREG_DEVS1) << 16);
/* Check all the expected MMDs are present */
if (devices < 0) {
EFX_ERR(efx, "failed to read devices present\n");
return -EIO;
}
if ((devices & mmd_mask) != mmd_mask) {
EFX_ERR(efx, "required MMDs not present: got %x, "
"wanted %x\n", devices, mmd_mask);
return -ENODEV;
}
EFX_TRACE(efx, "Devices present: %x\n", devices);
/* Check all required MMDs are responding and happy. */
while (mmd_mask) {
if (mmd_mask & 1) {
int fault_fatal = fatal_mask & 1;
if (mdio_clause45_check_mmd(efx, mmd, fault_fatal))
return -EIO;
}
mmd_mask = mmd_mask >> 1;
fatal_mask = fatal_mask >> 1;
mmd++;
}
return 0;
}
bool mdio_clause45_links_ok(struct efx_nic *efx, unsigned int mmd_mask)
{
int phy_id = efx->mii.phy_id;
u32 reg;
bool ok = true;
int mmd = 0;
/* If the port is in loopback, then we should only consider a subset
* of mmd's */
if (LOOPBACK_INTERNAL(efx))
return true;
else if (efx->loopback_mode == LOOPBACK_NETWORK)
return false;
else if (efx_phy_mode_disabled(efx->phy_mode))
return false;
else if (efx->loopback_mode == LOOPBACK_PHYXS)
mmd_mask &= ~(MDIO_MMDREG_DEVS_PHYXS |
MDIO_MMDREG_DEVS_PCS |
MDIO_MMDREG_DEVS_PMAPMD |
MDIO_MMDREG_DEVS_AN);
else if (efx->loopback_mode == LOOPBACK_PCS)
mmd_mask &= ~(MDIO_MMDREG_DEVS_PCS |
MDIO_MMDREG_DEVS_PMAPMD |
MDIO_MMDREG_DEVS_AN);
else if (efx->loopback_mode == LOOPBACK_PMAPMD)
mmd_mask &= ~(MDIO_MMDREG_DEVS_PMAPMD |
MDIO_MMDREG_DEVS_AN);
if (!mmd_mask) {
/* Use presence of XGMII faults in leui of link state */
reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PHYXS,
MDIO_PHYXS_STATUS2);
return !(reg & (1 << MDIO_PHYXS_STATUS2_RX_FAULT_LBN));
}
while (mmd_mask) {
if (mmd_mask & 1) {
/* Double reads because link state is latched, and a
* read moves the current state into the register */
reg = mdio_clause45_read(efx, phy_id,
mmd, MDIO_MMDREG_STAT1);
reg = mdio_clause45_read(efx, phy_id,
mmd, MDIO_MMDREG_STAT1);
ok = ok && (reg & (1 << MDIO_MMDREG_STAT1_LINK_LBN));
}
mmd_mask = (mmd_mask >> 1);
mmd++;
}
return ok;
}
void mdio_clause45_transmit_disable(struct efx_nic *efx)
{
mdio_clause45_set_flag(efx, efx->mii.phy_id, MDIO_MMD_PMAPMD,
MDIO_MMDREG_TXDIS, MDIO_MMDREG_TXDIS_GLOBAL_LBN,
efx->phy_mode & PHY_MODE_TX_DISABLED);
}
void mdio_clause45_phy_reconfigure(struct efx_nic *efx)
{
int phy_id = efx->mii.phy_id;
mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_PMAPMD,
MDIO_MMDREG_CTRL1, MDIO_PMAPMD_CTRL1_LBACK_LBN,
efx->loopback_mode == LOOPBACK_PMAPMD);
mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_PCS,
MDIO_MMDREG_CTRL1, MDIO_MMDREG_CTRL1_LBACK_LBN,
efx->loopback_mode == LOOPBACK_PCS);
mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_PHYXS,
MDIO_MMDREG_CTRL1, MDIO_MMDREG_CTRL1_LBACK_LBN,
efx->loopback_mode == LOOPBACK_NETWORK);
}
static void mdio_clause45_set_mmd_lpower(struct efx_nic *efx,
int lpower, int mmd)
{
int phy = efx->mii.phy_id;
int stat = mdio_clause45_read(efx, phy, mmd, MDIO_MMDREG_STAT1);
EFX_TRACE(efx, "Setting low power mode for MMD %d to %d\n",
mmd, lpower);
if (stat & (1 << MDIO_MMDREG_STAT1_LPABLE_LBN)) {
mdio_clause45_set_flag(efx, phy, mmd, MDIO_MMDREG_CTRL1,
MDIO_MMDREG_CTRL1_LPOWER_LBN, lpower);
}
}
void mdio_clause45_set_mmds_lpower(struct efx_nic *efx,
int low_power, unsigned int mmd_mask)
{
int mmd = 0;
mmd_mask &= ~MDIO_MMDREG_DEVS_AN;
while (mmd_mask) {
if (mmd_mask & 1)
mdio_clause45_set_mmd_lpower(efx, low_power, mmd);
mmd_mask = (mmd_mask >> 1);
mmd++;
}
}
static u32 mdio_clause45_get_an(struct efx_nic *efx, u16 addr, u32 xnp)
{
int phy_id = efx->mii.phy_id;
u32 result = 0;
int reg;
reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN, addr);
if (reg & ADVERTISE_10HALF)
result |= ADVERTISED_10baseT_Half;
if (reg & ADVERTISE_10FULL)
result |= ADVERTISED_10baseT_Full;
if (reg & ADVERTISE_100HALF)
result |= ADVERTISED_100baseT_Half;
if (reg & ADVERTISE_100FULL)
result |= ADVERTISED_100baseT_Full;
if (reg & LPA_RESV)
result |= xnp;
return result;
}
/**
* mdio_clause45_get_settings - Read (some of) the PHY settings over MDIO.
* @efx: Efx NIC
* @ecmd: Buffer for settings
*
* On return the 'port', 'speed', 'supported' and 'advertising' fields of
* ecmd have been filled out.
*/
void mdio_clause45_get_settings(struct efx_nic *efx,
struct ethtool_cmd *ecmd)
{
mdio_clause45_get_settings_ext(efx, ecmd, 0, 0);
}
/**
* mdio_clause45_get_settings_ext - Read (some of) the PHY settings over MDIO.
* @efx: Efx NIC
* @ecmd: Buffer for settings
* @xnp: Advertised Extended Next Page state
* @xnp_lpa: Link Partner's advertised XNP state
*
* On return the 'port', 'speed', 'supported' and 'advertising' fields of
* ecmd have been filled out.
*/
void mdio_clause45_get_settings_ext(struct efx_nic *efx,
struct ethtool_cmd *ecmd,
u32 xnp, u32 xnp_lpa)
{
int phy_id = efx->mii.phy_id;
int reg;
ecmd->transceiver = XCVR_INTERNAL;
ecmd->phy_address = phy_id;
reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PMAPMD,
MDIO_MMDREG_CTRL2);
switch (reg & MDIO_PMAPMD_CTRL2_TYPE_MASK) {
case MDIO_PMAPMD_CTRL2_10G_BT:
case MDIO_PMAPMD_CTRL2_1G_BT:
case MDIO_PMAPMD_CTRL2_100_BT:
case MDIO_PMAPMD_CTRL2_10_BT:
ecmd->port = PORT_TP;
ecmd->supported = SUPPORTED_TP;
reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PMAPMD,
MDIO_MMDREG_SPEED);
if (reg & (1 << MDIO_MMDREG_SPEED_10G_LBN))
ecmd->supported |= SUPPORTED_10000baseT_Full;
if (reg & (1 << MDIO_MMDREG_SPEED_1000M_LBN))
ecmd->supported |= (SUPPORTED_1000baseT_Full |
SUPPORTED_1000baseT_Half);
if (reg & (1 << MDIO_MMDREG_SPEED_100M_LBN))
ecmd->supported |= (SUPPORTED_100baseT_Full |
SUPPORTED_100baseT_Half);
if (reg & (1 << MDIO_MMDREG_SPEED_10M_LBN))
ecmd->supported |= (SUPPORTED_10baseT_Full |
SUPPORTED_10baseT_Half);
ecmd->advertising = ADVERTISED_TP;
break;
/* We represent CX4 as fibre in the absence of anything better */
case MDIO_PMAPMD_CTRL2_10G_CX4:
/* All the other defined modes are flavours of optical */
default:
ecmd->port = PORT_FIBRE;
ecmd->supported = SUPPORTED_FIBRE;
ecmd->advertising = ADVERTISED_FIBRE;
break;
}
if (efx->phy_op->mmds & DEV_PRESENT_BIT(MDIO_MMD_AN)) {
ecmd->supported |= SUPPORTED_Autoneg;
reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN,
MDIO_MMDREG_CTRL1);
if (reg & BMCR_ANENABLE) {
ecmd->autoneg = AUTONEG_ENABLE;
ecmd->advertising |=
ADVERTISED_Autoneg |
mdio_clause45_get_an(efx,
MDIO_AN_ADVERTISE, xnp);
} else
ecmd->autoneg = AUTONEG_DISABLE;
} else
ecmd->autoneg = AUTONEG_DISABLE;
if (ecmd->autoneg) {
/* If AN is complete, report best common mode,
* otherwise report best advertised mode. */
u32 common = ecmd->advertising;
if (mdio_clause45_read(efx, phy_id, MDIO_MMD_AN,
MDIO_MMDREG_STAT1) &
(1 << MDIO_AN_STATUS_AN_DONE_LBN)) {
common &= mdio_clause45_get_an(efx, MDIO_AN_LPA,
xnp_lpa);
}
if (common & ADVERTISED_10000baseT_Full) {
ecmd->speed = SPEED_10000;
ecmd->duplex = DUPLEX_FULL;
} else if (common & (ADVERTISED_1000baseT_Full |
ADVERTISED_1000baseT_Half)) {
ecmd->speed = SPEED_1000;
ecmd->duplex = !!(common & ADVERTISED_1000baseT_Full);
} else if (common & (ADVERTISED_100baseT_Full |
ADVERTISED_100baseT_Half)) {
ecmd->speed = SPEED_100;
ecmd->duplex = !!(common & ADVERTISED_100baseT_Full);
} else {
ecmd->speed = SPEED_10;
ecmd->duplex = !!(common & ADVERTISED_10baseT_Full);
}
} else {
/* Report forced settings */
reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PMAPMD,
MDIO_MMDREG_CTRL1);
ecmd->speed = (((reg & BMCR_SPEED1000) ? 100 : 1) *
((reg & BMCR_SPEED100) ? 100 : 10));
ecmd->duplex = (reg & BMCR_FULLDPLX ||
ecmd->speed == SPEED_10000);
}
}
/**
* mdio_clause45_set_settings - Set (some of) the PHY settings over MDIO.
* @efx: Efx NIC
* @ecmd: New settings
*/
int mdio_clause45_set_settings(struct efx_nic *efx,
struct ethtool_cmd *ecmd)
{
int phy_id = efx->mii.phy_id;
struct ethtool_cmd prev;
u32 required;
int ctrl1_bits, reg;
efx->phy_op->get_settings(efx, &prev);
if (ecmd->advertising == prev.advertising &&
ecmd->speed == prev.speed &&
ecmd->duplex == prev.duplex &&
ecmd->port == prev.port &&
ecmd->autoneg == prev.autoneg)
return 0;
/* We can only change these settings for -T PHYs */
if (prev.port != PORT_TP || ecmd->port != PORT_TP)
return -EINVAL;
/* Check that PHY supports these settings and work out the
* basic control bits */
if (ecmd->duplex) {
switch (ecmd->speed) {
case SPEED_10:
ctrl1_bits = BMCR_FULLDPLX;
required = SUPPORTED_10baseT_Full;
break;
case SPEED_100:
ctrl1_bits = BMCR_SPEED100 | BMCR_FULLDPLX;
required = SUPPORTED_100baseT_Full;
break;
case SPEED_1000:
ctrl1_bits = BMCR_SPEED1000 | BMCR_FULLDPLX;
required = SUPPORTED_1000baseT_Full;
break;
case SPEED_10000:
ctrl1_bits = (BMCR_SPEED1000 | BMCR_SPEED100 |
BMCR_FULLDPLX);
required = SUPPORTED_10000baseT_Full;
break;
default:
return -EINVAL;
}
} else {
switch (ecmd->speed) {
case SPEED_10:
ctrl1_bits = 0;
required = SUPPORTED_10baseT_Half;
break;
case SPEED_100:
ctrl1_bits = BMCR_SPEED100;
required = SUPPORTED_100baseT_Half;
break;
case SPEED_1000:
ctrl1_bits = BMCR_SPEED1000;
required = SUPPORTED_1000baseT_Half;
break;
default:
return -EINVAL;
}
}
if (ecmd->autoneg)
required |= SUPPORTED_Autoneg;
required |= ecmd->advertising;
if (required & ~prev.supported)
return -EINVAL;
/* Set the basic control bits */
reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PMAPMD,
MDIO_MMDREG_CTRL1);
reg &= ~(BMCR_SPEED1000 | BMCR_SPEED100 | BMCR_FULLDPLX | 0x003c);
reg |= ctrl1_bits;
mdio_clause45_write(efx, phy_id, MDIO_MMD_PMAPMD, MDIO_MMDREG_CTRL1,
reg);
/* Set the AN registers */
if (ecmd->autoneg != prev.autoneg ||
ecmd->advertising != prev.advertising) {
bool xnp = false;
if (efx->phy_op->set_xnp_advertise)
xnp = efx->phy_op->set_xnp_advertise(efx,
ecmd->advertising);
if (ecmd->autoneg) {
reg = 0;
if (ecmd->advertising & ADVERTISED_10baseT_Half)
reg |= ADVERTISE_10HALF;
if (ecmd->advertising & ADVERTISED_10baseT_Full)
reg |= ADVERTISE_10FULL;
if (ecmd->advertising & ADVERTISED_100baseT_Half)
reg |= ADVERTISE_100HALF;
if (ecmd->advertising & ADVERTISED_100baseT_Full)
reg |= ADVERTISE_100FULL;
if (xnp)
reg |= ADVERTISE_RESV;
mdio_clause45_write(efx, phy_id, MDIO_MMD_AN,
MDIO_AN_ADVERTISE, reg);
}
reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN,
MDIO_MMDREG_CTRL1);
if (ecmd->autoneg)
reg |= BMCR_ANENABLE | BMCR_ANRESTART;
else
reg &= ~BMCR_ANENABLE;
if (EFX_WORKAROUND_15195(efx)
&& LOOPBACK_MASK(efx) & efx->phy_op->loopbacks)
reg &= ~BMCR_ANRESTART;
if (xnp)
reg |= 1 << MDIO_AN_CTRL_XNP_LBN;
else
reg &= ~(1 << MDIO_AN_CTRL_XNP_LBN);
mdio_clause45_write(efx, phy_id, MDIO_MMD_AN,
MDIO_MMDREG_CTRL1, reg);
}
return 0;
}
void mdio_clause45_set_pause(struct efx_nic *efx)
{
int phy_id = efx->mii.phy_id;
int reg;
if (efx->phy_op->mmds & DEV_PRESENT_BIT(MDIO_MMD_AN)) {
/* Set pause capability advertising */
reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN,
MDIO_AN_ADVERTISE);
reg &= ~(ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM);
reg |= efx_fc_advertise(efx->wanted_fc);
mdio_clause45_write(efx, phy_id, MDIO_MMD_AN,
MDIO_AN_ADVERTISE, reg);
/* Restart auto-negotiation */
reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN,
MDIO_MMDREG_CTRL1);
if (reg & BMCR_ANENABLE) {
reg |= BMCR_ANRESTART;
mdio_clause45_write(efx, phy_id, MDIO_MMD_AN,
MDIO_MMDREG_CTRL1, reg);
}
}
}
enum efx_fc_type mdio_clause45_get_pause(struct efx_nic *efx)
{
int phy_id = efx->mii.phy_id;
int lpa;
if (!(efx->phy_op->mmds & DEV_PRESENT_BIT(MDIO_MMD_AN)))
return efx->wanted_fc;
lpa = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN, MDIO_AN_LPA);
return efx_fc_resolve(efx->wanted_fc, lpa);
}
void mdio_clause45_set_flag(struct efx_nic *efx, u8 prt, u8 dev,
u16 addr, int bit, bool sense)
{
int old_val = mdio_clause45_read(efx, prt, dev, addr);
int new_val;
if (sense)
new_val = old_val | (1 << bit);
else
new_val = old_val & ~(1 << bit);
if (old_val != new_val)
mdio_clause45_write(efx, prt, dev, addr, new_val);
}
View Git Blame Copy Permalink