kevin/linux
1
Fork 0
Code
63906e41fe
linux/drivers/usb/net/rtl8150.c
Alan Stern b375a0495f [PATCH] USB: URB_ASYNC_UNLINK flag removed from the kernel 
29 July 2005, Cambridge, MA:

This afternoon Alan Stern submitted a patch to remove the URB_ASYNC_UNLINK
flag from the Linux kernel.  Mr. Stern explained, "This flag is a relic
from an earlier, less-well-designed system.  For over a year it hasn't
been used for anything other than printing warning messages."

An anonymous spokesman for the Linux kernel development community
commented, "This is exactly the sort of thing we see happening all the
time.  As the kernel evolves, support for old techniques and old code can
be jettisoned and replaced by newer, better approaches.  Proprietary
operating systems do not have the freedom or flexibility to change so
quickly."

Mr. Stern, a staff member at Harvard University's Rowland Institute who
works on Linux only as a hobby, noted that the patch (labelled as548) did
not update two files, keyspan.c and option.c, in the USB drivers' "serial"
subdirectory.  "Those files need more extensive changes," he remarked.
"They examine the status field of several URBs at times when they're not
supposed to.  That will need to be fixed before the URB_ASYNC_UNLINK flag
is removed."

Greg Kroah-Hartman, the kernel maintainer responsible for overseeing all
of Linux's USB drivers, did not respond to our inquiries or return our
calls.  His only comment was "Applied, thanks."

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-08 16:23:04 -07:00

940 lines
22 KiB
C
Raw Blame History

/*
* Copyright (c) 2002 Petko Manolov (petkan@users.sourceforge.net)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*/
#include <linux/config.h>
#include <linux/sched.h>
#include <linux/init.h>
#include <linux/signal.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/mii.h>
#include <linux/ethtool.h>
#include <linux/usb.h>
#include <asm/uaccess.h>
/* Version Information */
#define DRIVER_VERSION "v0.6.2 (2004/08/27)"
#define DRIVER_AUTHOR "Petko Manolov <petkan@users.sourceforge.net>"
#define DRIVER_DESC "rtl8150 based usb-ethernet driver"
#define IDR 0x0120
#define MAR 0x0126
#define CR 0x012e
#define TCR 0x012f
#define RCR 0x0130
#define TSR 0x0132
#define RSR 0x0133
#define CON0 0x0135
#define CON1 0x0136
#define MSR 0x0137
#define PHYADD 0x0138
#define PHYDAT 0x0139
#define PHYCNT 0x013b
#define GPPC 0x013d
#define BMCR 0x0140
#define BMSR 0x0142
#define ANAR 0x0144
#define ANLP 0x0146
#define AER 0x0148
#define CSCR 0x014C /* This one has the link status */
#define CSCR_LINK_STATUS (1 << 3)
#define IDR_EEPROM 0x1202
#define PHY_READ 0
#define PHY_WRITE 0x20
#define PHY_GO 0x40
#define MII_TIMEOUT 10
#define INTBUFSIZE 8
#define RTL8150_REQT_READ 0xc0
#define RTL8150_REQT_WRITE 0x40
#define RTL8150_REQ_GET_REGS 0x05
#define RTL8150_REQ_SET_REGS 0x05
/* Transmit status register errors */
#define TSR_ECOL (1<<5)
#define TSR_LCOL (1<<4)
#define TSR_LOSS_CRS (1<<3)
#define TSR_JBR (1<<2)
#define TSR_ERRORS (TSR_ECOL | TSR_LCOL | TSR_LOSS_CRS | TSR_JBR)
/* Receive status register errors */
#define RSR_CRC (1<<2)
#define RSR_FAE (1<<1)
#define RSR_ERRORS (RSR_CRC | RSR_FAE)
/* Media status register definitions */
#define MSR_DUPLEX (1<<4)
#define MSR_SPEED (1<<3)
#define MSR_LINK (1<<2)
/* Interrupt pipe data */
#define INT_TSR 0x00
#define INT_RSR 0x01
#define INT_MSR 0x02
#define INT_WAKSR 0x03
#define INT_TXOK_CNT 0x04
#define INT_RXLOST_CNT 0x05
#define INT_CRERR_CNT 0x06
#define INT_COL_CNT 0x07
/* Transmit status register errors */
#define TSR_ECOL (1<<5)
#define TSR_LCOL (1<<4)
#define TSR_LOSS_CRS (1<<3)
#define TSR_JBR (1<<2)
#define TSR_ERRORS (TSR_ECOL | TSR_LCOL | TSR_LOSS_CRS | TSR_JBR)
/* Receive status register errors */
#define RSR_CRC (1<<2)
#define RSR_FAE (1<<1)
#define RSR_ERRORS (RSR_CRC | RSR_FAE)
/* Media status register definitions */
#define MSR_DUPLEX (1<<4)
#define MSR_SPEED (1<<3)
#define MSR_LINK (1<<2)
/* Interrupt pipe data */
#define INT_TSR 0x00
#define INT_RSR 0x01
#define INT_MSR 0x02
#define INT_WAKSR 0x03
#define INT_TXOK_CNT 0x04
#define INT_RXLOST_CNT 0x05
#define INT_CRERR_CNT 0x06
#define INT_COL_CNT 0x07
#define RTL8150_MTU 1540
#define RTL8150_TX_TIMEOUT (HZ)
#define RX_SKB_POOL_SIZE 4
/* rtl8150 flags */
#define RTL8150_HW_CRC 0
#define RX_REG_SET 1
#define RTL8150_UNPLUG 2
#define RX_URB_FAIL 3
/* Define these values to match your device */
#define VENDOR_ID_REALTEK 0x0bda
#define VENDOR_ID_MELCO 0x0411
#define VENDOR_ID_MICRONET 0x3980
#define VENDOR_ID_LONGSHINE 0x07b8
#define PRODUCT_ID_RTL8150 0x8150
#define PRODUCT_ID_LUAKTX 0x0012
#define PRODUCT_ID_LCS8138TX 0x401a
#define PRODUCT_ID_SP128AR 0x0003
#undef EEPROM_WRITE
/* table of devices that work with this driver */
static struct usb_device_id rtl8150_table[] = {
{USB_DEVICE(VENDOR_ID_REALTEK, PRODUCT_ID_RTL8150)},
{USB_DEVICE(VENDOR_ID_MELCO, PRODUCT_ID_LUAKTX)},
{USB_DEVICE(VENDOR_ID_MICRONET, PRODUCT_ID_SP128AR)},
{USB_DEVICE(VENDOR_ID_LONGSHINE, PRODUCT_ID_LCS8138TX)},
{}
};
MODULE_DEVICE_TABLE(usb, rtl8150_table);
struct rtl8150 {
unsigned long flags;
struct usb_device *udev;
struct tasklet_struct tl;
struct net_device_stats stats;
struct net_device *netdev;
struct urb *rx_urb, *tx_urb, *intr_urb, *ctrl_urb;
struct sk_buff *tx_skb, *rx_skb;
struct sk_buff *rx_skb_pool[RX_SKB_POOL_SIZE];
spinlock_t rx_pool_lock;
struct usb_ctrlrequest dr;
int intr_interval;
__le16 rx_creg;
u8 *intr_buff;
u8 phy;
};
typedef struct rtl8150 rtl8150_t;
static void fill_skb_pool(rtl8150_t *);
static void free_skb_pool(rtl8150_t *);
static inline struct sk_buff *pull_skb(rtl8150_t *);
static void rtl8150_disconnect(struct usb_interface *intf);
static int rtl8150_probe(struct usb_interface *intf,
const struct usb_device_id *id);
static const char driver_name [] = "rtl8150";
static struct usb_driver rtl8150_driver = {
.owner = THIS_MODULE,
.name = driver_name,
.probe = rtl8150_probe,
.disconnect = rtl8150_disconnect,
.id_table = rtl8150_table,
};
/*
**
** device related part of the code
**
*/
static int get_registers(rtl8150_t * dev, u16 indx, u16 size, void *data)
{
return usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0),
RTL8150_REQ_GET_REGS, RTL8150_REQT_READ,
indx, 0, data, size, 500);
}
static int set_registers(rtl8150_t * dev, u16 indx, u16 size, void *data)
{
return usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0),
RTL8150_REQ_SET_REGS, RTL8150_REQT_WRITE,
indx, 0, data, size, 500);
}
static void ctrl_callback(struct urb *urb, struct pt_regs *regs)
{
rtl8150_t *dev;
switch (urb->status) {
case 0:
break;
case -EINPROGRESS:
break;
case -ENOENT:
break;
default:
warn("ctrl urb status %d", urb->status);
}
dev = urb->context;
clear_bit(RX_REG_SET, &dev->flags);
}
static int async_set_registers(rtl8150_t * dev, u16 indx, u16 size)
{
int ret;
if (test_bit(RX_REG_SET, &dev->flags))
return -EAGAIN;
dev->dr.bRequestType = RTL8150_REQT_WRITE;
dev->dr.bRequest = RTL8150_REQ_SET_REGS;
dev->dr.wValue = cpu_to_le16(indx);
dev->dr.wIndex = 0;
dev->dr.wLength = cpu_to_le16(size);
dev->ctrl_urb->transfer_buffer_length = size;
usb_fill_control_urb(dev->ctrl_urb, dev->udev,
usb_sndctrlpipe(dev->udev, 0), (char *) &dev->dr,
&dev->rx_creg, size, ctrl_callback, dev);
if ((ret = usb_submit_urb(dev->ctrl_urb, GFP_ATOMIC)))
err("control request submission failed: %d", ret);
else
set_bit(RX_REG_SET, &dev->flags);
return ret;
}
static int read_mii_word(rtl8150_t * dev, u8 phy, __u8 indx, u16 * reg)
{
int i;
u8 data[3], tmp;
data[0] = phy;
data[1] = data[2] = 0;
tmp = indx | PHY_READ | PHY_GO;
i = 0;
set_registers(dev, PHYADD, sizeof(data), data);
set_registers(dev, PHYCNT, 1, &tmp);
do {
get_registers(dev, PHYCNT, 1, data);
} while ((data[0] & PHY_GO) && (i++ < MII_TIMEOUT));
if (i < MII_TIMEOUT) {
get_registers(dev, PHYDAT, 2, data);
*reg = data[0] | (data[1] << 8);
return 0;
} else
return 1;
}
static int write_mii_word(rtl8150_t * dev, u8 phy, __u8 indx, u16 reg)
{
int i;
u8 data[3], tmp;
data[0] = phy;
*(data + 1) = cpu_to_le16p(&reg);
tmp = indx | PHY_WRITE | PHY_GO;
i = 0;
set_registers(dev, PHYADD, sizeof(data), data);
set_registers(dev, PHYCNT, 1, &tmp);
do {
get_registers(dev, PHYCNT, 1, data);
} while ((data[0] & PHY_GO) && (i++ < MII_TIMEOUT));
if (i < MII_TIMEOUT)
return 0;
else
return 1;
}
static inline void set_ethernet_addr(rtl8150_t * dev)
{
u8 node_id[6];
get_registers(dev, IDR, sizeof(node_id), node_id);
memcpy(dev->netdev->dev_addr, node_id, sizeof(node_id));
}
static int rtl8150_set_mac_address(struct net_device *netdev, void *p)
{
struct sockaddr *addr = p;
rtl8150_t *dev = netdev_priv(netdev);
int i;
if (netif_running(netdev))
return -EBUSY;
memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
dbg("%s: Setting MAC address to ", netdev->name);
for (i = 0; i < 5; i++)
dbg("%02X:", netdev->dev_addr[i]);
dbg("%02X\n", netdev->dev_addr[i]);
/* Set the IDR registers. */
set_registers(dev, IDR, sizeof(netdev->dev_addr), netdev->dev_addr);
#ifdef EEPROM_WRITE
{
u8 cr;
/* Get the CR contents. */
get_registers(dev, CR, 1, &cr);
/* Set the WEPROM bit (eeprom write enable). */
cr |= 0x20;
set_registers(dev, CR, 1, &cr);
/* Write the MAC address into eeprom. Eeprom writes must be word-sized,
so we need to split them up. */
for (i = 0; i * 2 < netdev->addr_len; i++) {
set_registers(dev, IDR_EEPROM + (i * 2), 2,
netdev->dev_addr + (i * 2));
}
/* Clear the WEPROM bit (preventing accidental eeprom writes). */
cr &= 0xdf;
set_registers(dev, CR, 1, &cr);
}
#endif
return 0;
}
static int rtl8150_reset(rtl8150_t * dev)
{
u8 data = 0x10;
int i = HZ;
set_registers(dev, CR, 1, &data);
do {
get_registers(dev, CR, 1, &data);
} while ((data & 0x10) && --i);
return (i > 0) ? 1 : 0;
}
static int alloc_all_urbs(rtl8150_t * dev)
{
dev->rx_urb = usb_alloc_urb(0, GFP_KERNEL);
if (!dev->rx_urb)
return 0;
dev->tx_urb = usb_alloc_urb(0, GFP_KERNEL);
if (!dev->tx_urb) {
usb_free_urb(dev->rx_urb);
return 0;
}
dev->intr_urb = usb_alloc_urb(0, GFP_KERNEL);
if (!dev->intr_urb) {
usb_free_urb(dev->rx_urb);
usb_free_urb(dev->tx_urb);
return 0;
}
dev->ctrl_urb = usb_alloc_urb(0, GFP_KERNEL);
if (!dev->intr_urb) {
usb_free_urb(dev->rx_urb);
usb_free_urb(dev->tx_urb);
usb_free_urb(dev->intr_urb);
return 0;
}
return 1;
}
static void free_all_urbs(rtl8150_t * dev)
{
usb_free_urb(dev->rx_urb);
usb_free_urb(dev->tx_urb);
usb_free_urb(dev->intr_urb);
usb_free_urb(dev->ctrl_urb);
}
static void unlink_all_urbs(rtl8150_t * dev)
{
usb_kill_urb(dev->rx_urb);
usb_kill_urb(dev->tx_urb);
usb_kill_urb(dev->intr_urb);
usb_kill_urb(dev->ctrl_urb);
}
static inline struct sk_buff *pull_skb(rtl8150_t *dev)
{
struct sk_buff *skb;
int i;
for (i = 0; i < RX_SKB_POOL_SIZE; i++) {
if (dev->rx_skb_pool[i]) {
skb = dev->rx_skb_pool[i];
dev->rx_skb_pool[i] = NULL;
return skb;
}
}
return NULL;
}
static void read_bulk_callback(struct urb *urb, struct pt_regs *regs)
{
rtl8150_t *dev;
unsigned pkt_len, res;
struct sk_buff *skb;
struct net_device *netdev;
u16 rx_stat;
dev = urb->context;
if (!dev)
return;
if (test_bit(RTL8150_UNPLUG, &dev->flags))
return;
netdev = dev->netdev;
if (!netif_device_present(netdev))
return;
switch (urb->status) {
case 0:
break;
case -ENOENT:
return; /* the urb is in unlink state */
case -ETIMEDOUT:
warn("may be reset is needed?..");
goto goon;
default:
warn("Rx status %d", urb->status);
goto goon;
}
if (!dev->rx_skb)
goto resched;
/* protect against short packets (tell me why we got some?!?) */
if (urb->actual_length < 4)
goto goon;
res = urb->actual_length;
rx_stat = le16_to_cpu(*(__le16 *)(urb->transfer_buffer + res - 4));
pkt_len = res - 4;
skb_put(dev->rx_skb, pkt_len);
dev->rx_skb->protocol = eth_type_trans(dev->rx_skb, netdev);
netif_rx(dev->rx_skb);
dev->stats.rx_packets++;
dev->stats.rx_bytes += pkt_len;
spin_lock(&dev->rx_pool_lock);
skb = pull_skb(dev);
spin_unlock(&dev->rx_pool_lock);
if (!skb)
goto resched;
dev->rx_skb = skb;
goon:
usb_fill_bulk_urb(dev->rx_urb, dev->udev, usb_rcvbulkpipe(dev->udev, 1),
dev->rx_skb->data, RTL8150_MTU, read_bulk_callback, dev);
if (usb_submit_urb(dev->rx_urb, GFP_ATOMIC)) {
set_bit(RX_URB_FAIL, &dev->flags);
goto resched;
} else {
clear_bit(RX_URB_FAIL, &dev->flags);
}
return;
resched:
tasklet_schedule(&dev->tl);
}
static void rx_fixup(unsigned long data)
{
rtl8150_t *dev;
struct sk_buff *skb;
dev = (rtl8150_t *)data;
spin_lock_irq(&dev->rx_pool_lock);
fill_skb_pool(dev);
spin_unlock_irq(&dev->rx_pool_lock);
if (test_bit(RX_URB_FAIL, &dev->flags))
if (dev->rx_skb)
goto try_again;
spin_lock_irq(&dev->rx_pool_lock);
skb = pull_skb(dev);
spin_unlock_irq(&dev->rx_pool_lock);
if (skb == NULL)
goto tlsched;
dev->rx_skb = skb;
usb_fill_bulk_urb(dev->rx_urb, dev->udev, usb_rcvbulkpipe(dev->udev, 1),
dev->rx_skb->data, RTL8150_MTU, read_bulk_callback, dev);
try_again:
if (usb_submit_urb(dev->rx_urb, GFP_ATOMIC)) {
set_bit(RX_URB_FAIL, &dev->flags);
goto tlsched;
} else {
clear_bit(RX_URB_FAIL, &dev->flags);
}
return;
tlsched:
tasklet_schedule(&dev->tl);
}
static void write_bulk_callback(struct urb *urb, struct pt_regs *regs)
{
rtl8150_t *dev;
dev = urb->context;
if (!dev)
return;
dev_kfree_skb_irq(dev->tx_skb);
if (!netif_device_present(dev->netdev))
return;
if (urb->status)
info("%s: Tx status %d", dev->netdev->name, urb->status);
dev->netdev->trans_start = jiffies;
netif_wake_queue(dev->netdev);
}
static void intr_callback(struct urb *urb, struct pt_regs *regs)
{
rtl8150_t *dev;
__u8 *d;
int status;
dev = urb->context;
if (!dev)
return;
switch (urb->status) {
case 0: /* success */
break;
case -ECONNRESET: /* unlink */
case -ENOENT:
case -ESHUTDOWN:
return;
/* -EPIPE: should clear the halt */
default:
info("%s: intr status %d", dev->netdev->name, urb->status);
goto resubmit;
}
d = urb->transfer_buffer;
if (d[0] & TSR_ERRORS) {
dev->stats.tx_errors++;
if (d[INT_TSR] & (TSR_ECOL | TSR_JBR))
dev->stats.tx_aborted_errors++;
if (d[INT_TSR] & TSR_LCOL)
dev->stats.tx_window_errors++;
if (d[INT_TSR] & TSR_LOSS_CRS)
dev->stats.tx_carrier_errors++;
}
/* Report link status changes to the network stack */
if ((d[INT_MSR] & MSR_LINK) == 0) {
if (netif_carrier_ok(dev->netdev)) {
netif_carrier_off(dev->netdev);
dbg("%s: LINK LOST\n", __func__);
}
} else {
if (!netif_carrier_ok(dev->netdev)) {
netif_carrier_on(dev->netdev);
dbg("%s: LINK CAME BACK\n", __func__);
}
}
resubmit:
status = usb_submit_urb (urb, SLAB_ATOMIC);
if (status)
err ("can't resubmit intr, %s-%s/input0, status %d",
dev->udev->bus->bus_name,
dev->udev->devpath, status);
}
/*
**
** network related part of the code
**
*/
static void fill_skb_pool(rtl8150_t *dev)
{
struct sk_buff *skb;
int i;
for (i = 0; i < RX_SKB_POOL_SIZE; i++) {
if (dev->rx_skb_pool[i])
continue;
skb = dev_alloc_skb(RTL8150_MTU + 2);
if (!skb) {
return;
}
skb->dev = dev->netdev;
skb_reserve(skb, 2);
dev->rx_skb_pool[i] = skb;
}
}
static void free_skb_pool(rtl8150_t *dev)
{
int i;
for (i = 0; i < RX_SKB_POOL_SIZE; i++)
if (dev->rx_skb_pool[i])
dev_kfree_skb(dev->rx_skb_pool[i]);
}
static int enable_net_traffic(rtl8150_t * dev)
{
u8 cr, tcr, rcr, msr;
if (!rtl8150_reset(dev)) {
warn("%s - device reset failed", __FUNCTION__);
}
/* RCR bit7=1 attach Rx info at the end; =0 HW CRC (which is broken) */
rcr = 0x9e;
dev->rx_creg = cpu_to_le16(rcr);
tcr = 0xd8;
cr = 0x0c;
if (!(rcr & 0x80))
set_bit(RTL8150_HW_CRC, &dev->flags);
set_registers(dev, RCR, 1, &rcr);
set_registers(dev, TCR, 1, &tcr);
set_registers(dev, CR, 1, &cr);
get_registers(dev, MSR, 1, &msr);
return 0;
}
static void disable_net_traffic(rtl8150_t * dev)
{
u8 cr;
get_registers(dev, CR, 1, &cr);
cr &= 0xf3;
set_registers(dev, CR, 1, &cr);
}
static struct net_device_stats *rtl8150_netdev_stats(struct net_device *dev)
{
return &((rtl8150_t *)netdev_priv(dev))->stats;
}
static void rtl8150_tx_timeout(struct net_device *netdev)
{
rtl8150_t *dev = netdev_priv(netdev);
warn("%s: Tx timeout.", netdev->name);
usb_unlink_urb(dev->tx_urb);
dev->stats.tx_errors++;
}
static void rtl8150_set_multicast(struct net_device *netdev)
{
rtl8150_t *dev = netdev_priv(netdev);
netif_stop_queue(netdev);
if (netdev->flags & IFF_PROMISC) {
dev->rx_creg |= cpu_to_le16(0x0001);
info("%s: promiscuous mode", netdev->name);
} else if (netdev->mc_count ||
(netdev->flags & IFF_ALLMULTI)) {
dev->rx_creg &= cpu_to_le16(0xfffe);
dev->rx_creg |= cpu_to_le16(0x0002);
info("%s: allmulti set", netdev->name);
} else {
/* ~RX_MULTICAST, ~RX_PROMISCUOUS */
dev->rx_creg &= cpu_to_le16(0x00fc);
}
async_set_registers(dev, RCR, 2);
netif_wake_queue(netdev);
}
static int rtl8150_start_xmit(struct sk_buff *skb, struct net_device *netdev)
{
rtl8150_t *dev = netdev_priv(netdev);
int count, res;
netif_stop_queue(netdev);
count = (skb->len < 60) ? 60 : skb->len;
count = (count & 0x3f) ? count : count + 1;
dev->tx_skb = skb;
usb_fill_bulk_urb(dev->tx_urb, dev->udev, usb_sndbulkpipe(dev->udev, 2),
skb->data, count, write_bulk_callback, dev);
if ((res = usb_submit_urb(dev->tx_urb, GFP_ATOMIC))) {
warn("failed tx_urb %d\n", res);
dev->stats.tx_errors++;
netif_start_queue(netdev);
} else {
dev->stats.tx_packets++;
dev->stats.tx_bytes += skb->len;
netdev->trans_start = jiffies;
}
return 0;
}
static void set_carrier(struct net_device *netdev)
{
rtl8150_t *dev = netdev_priv(netdev);
short tmp;
get_registers(dev, CSCR, 2, &tmp);
if (tmp & CSCR_LINK_STATUS)
netif_carrier_on(netdev);
else
netif_carrier_off(netdev);
}
static int rtl8150_open(struct net_device *netdev)
{
rtl8150_t *dev = netdev_priv(netdev);
int res;
if (dev->rx_skb == NULL)
dev->rx_skb = pull_skb(dev);
if (!dev->rx_skb)
return -ENOMEM;
set_registers(dev, IDR, 6, netdev->dev_addr);
usb_fill_bulk_urb(dev->rx_urb, dev->udev, usb_rcvbulkpipe(dev->udev, 1),
dev->rx_skb->data, RTL8150_MTU, read_bulk_callback, dev);
if ((res = usb_submit_urb(dev->rx_urb, GFP_KERNEL)))
warn("%s: rx_urb submit failed: %d", __FUNCTION__, res);
usb_fill_int_urb(dev->intr_urb, dev->udev, usb_rcvintpipe(dev->udev, 3),
dev->intr_buff, INTBUFSIZE, intr_callback,
dev, dev->intr_interval);
if ((res = usb_submit_urb(dev->intr_urb, GFP_KERNEL)))
warn("%s: intr_urb submit failed: %d", __FUNCTION__, res);
netif_start_queue(netdev);
enable_net_traffic(dev);
set_carrier(netdev);
return res;
}
static int rtl8150_close(struct net_device *netdev)
{
rtl8150_t *dev = netdev_priv(netdev);
int res = 0;
netif_stop_queue(netdev);
if (!test_bit(RTL8150_UNPLUG, &dev->flags))
disable_net_traffic(dev);
unlink_all_urbs(dev);
return res;
}
static void rtl8150_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *info)
{
rtl8150_t *dev = netdev_priv(netdev);
strncpy(info->driver, driver_name, ETHTOOL_BUSINFO_LEN);
strncpy(info->version, DRIVER_VERSION, ETHTOOL_BUSINFO_LEN);
usb_make_path(dev->udev, info->bus_info, sizeof info->bus_info);
}
static int rtl8150_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
{
rtl8150_t *dev = netdev_priv(netdev);
short lpa, bmcr;
ecmd->supported = (SUPPORTED_10baseT_Half |
SUPPORTED_10baseT_Full |
SUPPORTED_100baseT_Half |
SUPPORTED_100baseT_Full |
SUPPORTED_Autoneg |
SUPPORTED_TP | SUPPORTED_MII);
ecmd->port = PORT_TP;
ecmd->transceiver = XCVR_INTERNAL;
ecmd->phy_address = dev->phy;
get_registers(dev, BMCR, 2, &bmcr);
get_registers(dev, ANLP, 2, &lpa);
if (bmcr & BMCR_ANENABLE) {
ecmd->autoneg = AUTONEG_ENABLE;
ecmd->speed = (lpa & (LPA_100HALF | LPA_100FULL)) ?
SPEED_100 : SPEED_10;
if (ecmd->speed == SPEED_100)
ecmd->duplex = (lpa & LPA_100FULL) ?
DUPLEX_FULL : DUPLEX_HALF;
else
ecmd->duplex = (lpa & LPA_10FULL) ?
DUPLEX_FULL : DUPLEX_HALF;
} else {
ecmd->autoneg = AUTONEG_DISABLE;
ecmd->speed = (bmcr & BMCR_SPEED100) ?
SPEED_100 : SPEED_10;
ecmd->duplex = (bmcr & BMCR_FULLDPLX) ?
DUPLEX_FULL : DUPLEX_HALF;
}
return 0;
}
static struct ethtool_ops ops = {
.get_drvinfo = rtl8150_get_drvinfo,
.get_settings = rtl8150_get_settings,
.get_link = ethtool_op_get_link
};
static int rtl8150_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd)
{
rtl8150_t *dev = netdev_priv(netdev);
u16 *data = (u16 *) & rq->ifr_ifru;
int res = 0;
switch (cmd) {
case SIOCDEVPRIVATE:
data[0] = dev->phy;
case SIOCDEVPRIVATE + 1:
read_mii_word(dev, dev->phy, (data[1] & 0x1f), &data[3]);
break;
case SIOCDEVPRIVATE + 2:
if (!capable(CAP_NET_ADMIN))
return -EPERM;
write_mii_word(dev, dev->phy, (data[1] & 0x1f), data[2]);
break;
default:
res = -EOPNOTSUPP;
}
return res;
}
static int rtl8150_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
struct usb_device *udev = interface_to_usbdev(intf);
rtl8150_t *dev;
struct net_device *netdev;
netdev = alloc_etherdev(sizeof(rtl8150_t));
if (!netdev) {
err("Out of memory");
return -ENOMEM;
}
dev = netdev_priv(netdev);
memset(dev, 0, sizeof(rtl8150_t));
dev->intr_buff = kmalloc(INTBUFSIZE, GFP_KERNEL);
if (!dev->intr_buff) {
free_netdev(netdev);
return -ENOMEM;
}
tasklet_init(&dev->tl, rx_fixup, (unsigned long)dev);
spin_lock_init(&dev->rx_pool_lock);
dev->udev = udev;
dev->netdev = netdev;
SET_MODULE_OWNER(netdev);
netdev->open = rtl8150_open;
netdev->stop = rtl8150_close;
netdev->do_ioctl = rtl8150_ioctl;
netdev->watchdog_timeo = RTL8150_TX_TIMEOUT;
netdev->tx_timeout = rtl8150_tx_timeout;
netdev->hard_start_xmit = rtl8150_start_xmit;
netdev->set_multicast_list = rtl8150_set_multicast;
netdev->set_mac_address = rtl8150_set_mac_address;
netdev->get_stats = rtl8150_netdev_stats;
netdev->mtu = RTL8150_MTU;
SET_ETHTOOL_OPS(netdev, &ops);
dev->intr_interval = 100; /* 100ms */
if (!alloc_all_urbs(dev)) {
err("out of memory");
goto out;
}
if (!rtl8150_reset(dev)) {
err("couldn't reset the device");
goto out1;
}
fill_skb_pool(dev);
set_ethernet_addr(dev);
info("%s: rtl8150 is detected", netdev->name);
usb_set_intfdata(intf, dev);
SET_NETDEV_DEV(netdev, &intf->dev);
if (register_netdev(netdev) != 0) {
err("couldn't register the device");
goto out2;
}
return 0;
out2:
usb_set_intfdata(intf, NULL);
free_skb_pool(dev);
out1:
free_all_urbs(dev);
out:
kfree(dev->intr_buff);
free_netdev(netdev);
return -EIO;
}
static void rtl8150_disconnect(struct usb_interface *intf)
{
rtl8150_t *dev = usb_get_intfdata(intf);
usb_set_intfdata(intf, NULL);
if (dev) {
set_bit(RTL8150_UNPLUG, &dev->flags);
unregister_netdev(dev->netdev);
unlink_all_urbs(dev);
free_all_urbs(dev);
free_skb_pool(dev);
if (dev->rx_skb)
dev_kfree_skb(dev->rx_skb);
kfree(dev->intr_buff);
free_netdev(dev->netdev);
}
}
static int __init usb_rtl8150_init(void)
{
info(DRIVER_DESC " " DRIVER_VERSION);
return usb_register(&rtl8150_driver);
}
static void __exit usb_rtl8150_exit(void)
{
usb_deregister(&rtl8150_driver);
}
module_init(usb_rtl8150_init);
module_exit(usb_rtl8150_exit);
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
View Git Blame Copy Permalink