600fa578a9
Improve the sh7785lcr power off implementation to never return. It takes some time before the board is actually powered off, just hang after asking the harware to power down. This removes the serial port garbage printout. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
315 lines
6.7 KiB
C
315 lines
6.7 KiB
C
/*
|
|
* Renesas Technology Corp. R0P7785LC0011RL Support.
|
|
*
|
|
* Copyright (C) 2008 Yoshihiro Shimoda
|
|
*
|
|
* This file is subject to the terms and conditions of the GNU General Public
|
|
* License. See the file "COPYING" in the main directory of this archive
|
|
* for more details.
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/sm501.h>
|
|
#include <linux/sm501-regs.h>
|
|
#include <linux/fb.h>
|
|
#include <linux/mtd/physmap.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/i2c-pca-platform.h>
|
|
#include <linux/i2c-algo-pca.h>
|
|
#include <linux/irq.h>
|
|
#include <asm/heartbeat.h>
|
|
#include <mach/sh7785lcr.h>
|
|
|
|
/*
|
|
* NOTE: This board has 2 physical memory maps.
|
|
* Please look at include/asm-sh/sh7785lcr.h or hardware manual.
|
|
*/
|
|
static struct resource heartbeat_resources[] = {
|
|
[0] = {
|
|
.start = PLD_LEDCR,
|
|
.end = PLD_LEDCR,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
};
|
|
|
|
static struct heartbeat_data heartbeat_data = {
|
|
.regsize = 8,
|
|
};
|
|
|
|
static struct platform_device heartbeat_device = {
|
|
.name = "heartbeat",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &heartbeat_data,
|
|
},
|
|
.num_resources = ARRAY_SIZE(heartbeat_resources),
|
|
.resource = heartbeat_resources,
|
|
};
|
|
|
|
static struct mtd_partition nor_flash_partitions[] = {
|
|
{
|
|
.name = "loader",
|
|
.offset = 0x00000000,
|
|
.size = 512 * 1024,
|
|
},
|
|
{
|
|
.name = "bootenv",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = 512 * 1024,
|
|
},
|
|
{
|
|
.name = "kernel",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = 4 * 1024 * 1024,
|
|
},
|
|
{
|
|
.name = "data",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = MTDPART_SIZ_FULL,
|
|
},
|
|
};
|
|
|
|
static struct physmap_flash_data nor_flash_data = {
|
|
.width = 4,
|
|
.parts = nor_flash_partitions,
|
|
.nr_parts = ARRAY_SIZE(nor_flash_partitions),
|
|
};
|
|
|
|
static struct resource nor_flash_resources[] = {
|
|
[0] = {
|
|
.start = NOR_FLASH_ADDR,
|
|
.end = NOR_FLASH_ADDR + NOR_FLASH_SIZE - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
}
|
|
};
|
|
|
|
static struct platform_device nor_flash_device = {
|
|
.name = "physmap-flash",
|
|
.dev = {
|
|
.platform_data = &nor_flash_data,
|
|
},
|
|
.num_resources = ARRAY_SIZE(nor_flash_resources),
|
|
.resource = nor_flash_resources,
|
|
};
|
|
|
|
static struct resource r8a66597_usb_host_resources[] = {
|
|
[0] = {
|
|
.name = "r8a66597_hcd",
|
|
.start = R8A66597_ADDR,
|
|
.end = R8A66597_ADDR + R8A66597_SIZE - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.name = "r8a66597_hcd",
|
|
.start = 2,
|
|
.end = 2,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device r8a66597_usb_host_device = {
|
|
.name = "r8a66597_hcd",
|
|
.id = -1,
|
|
.dev = {
|
|
.dma_mask = NULL,
|
|
.coherent_dma_mask = 0xffffffff,
|
|
},
|
|
.num_resources = ARRAY_SIZE(r8a66597_usb_host_resources),
|
|
.resource = r8a66597_usb_host_resources,
|
|
};
|
|
|
|
static struct resource sm501_resources[] = {
|
|
[0] = {
|
|
.start = SM107_MEM_ADDR,
|
|
.end = SM107_MEM_ADDR + SM107_MEM_SIZE - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = SM107_REG_ADDR,
|
|
.end = SM107_REG_ADDR + SM107_REG_SIZE - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[2] = {
|
|
.start = 10,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct fb_videomode sm501_default_mode_crt = {
|
|
.pixclock = 35714, /* 28MHz */
|
|
.xres = 640,
|
|
.yres = 480,
|
|
.left_margin = 105,
|
|
.right_margin = 16,
|
|
.upper_margin = 33,
|
|
.lower_margin = 10,
|
|
.hsync_len = 39,
|
|
.vsync_len = 2,
|
|
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
|
|
};
|
|
|
|
static struct fb_videomode sm501_default_mode_pnl = {
|
|
.pixclock = 40000, /* 25MHz */
|
|
.xres = 640,
|
|
.yres = 480,
|
|
.left_margin = 2,
|
|
.right_margin = 16,
|
|
.upper_margin = 33,
|
|
.lower_margin = 10,
|
|
.hsync_len = 39,
|
|
.vsync_len = 2,
|
|
.sync = 0,
|
|
};
|
|
|
|
static struct sm501_platdata_fbsub sm501_pdata_fbsub_pnl = {
|
|
.def_bpp = 16,
|
|
.def_mode = &sm501_default_mode_pnl,
|
|
.flags = SM501FB_FLAG_USE_INIT_MODE |
|
|
SM501FB_FLAG_USE_HWCURSOR |
|
|
SM501FB_FLAG_USE_HWACCEL |
|
|
SM501FB_FLAG_DISABLE_AT_EXIT |
|
|
SM501FB_FLAG_PANEL_NO_VBIASEN,
|
|
};
|
|
|
|
static struct sm501_platdata_fbsub sm501_pdata_fbsub_crt = {
|
|
.def_bpp = 16,
|
|
.def_mode = &sm501_default_mode_crt,
|
|
.flags = SM501FB_FLAG_USE_INIT_MODE |
|
|
SM501FB_FLAG_USE_HWCURSOR |
|
|
SM501FB_FLAG_USE_HWACCEL |
|
|
SM501FB_FLAG_DISABLE_AT_EXIT,
|
|
};
|
|
|
|
static struct sm501_platdata_fb sm501_fb_pdata = {
|
|
.fb_route = SM501_FB_OWN,
|
|
.fb_crt = &sm501_pdata_fbsub_crt,
|
|
.fb_pnl = &sm501_pdata_fbsub_pnl,
|
|
};
|
|
|
|
static struct sm501_initdata sm501_initdata = {
|
|
.gpio_high = {
|
|
.set = 0x00001fe0,
|
|
.mask = 0x0,
|
|
},
|
|
.devices = 0,
|
|
.mclk = 84 * 1000000,
|
|
.m1xclk = 112 * 1000000,
|
|
};
|
|
|
|
static struct sm501_platdata sm501_platform_data = {
|
|
.init = &sm501_initdata,
|
|
.fb = &sm501_fb_pdata,
|
|
};
|
|
|
|
static struct platform_device sm501_device = {
|
|
.name = "sm501",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &sm501_platform_data,
|
|
},
|
|
.num_resources = ARRAY_SIZE(sm501_resources),
|
|
.resource = sm501_resources,
|
|
};
|
|
|
|
static struct resource i2c_resources[] = {
|
|
[0] = {
|
|
.start = PCA9564_ADDR,
|
|
.end = PCA9564_ADDR + PCA9564_SIZE - 1,
|
|
.flags = IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
|
|
},
|
|
[1] = {
|
|
.start = 12,
|
|
.end = 12,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct i2c_pca9564_pf_platform_data i2c_platform_data = {
|
|
.gpio = 0,
|
|
.i2c_clock_speed = I2C_PCA_CON_330kHz,
|
|
.timeout = 100,
|
|
};
|
|
|
|
static struct platform_device i2c_device = {
|
|
.name = "i2c-pca-platform",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &i2c_platform_data,
|
|
},
|
|
.num_resources = ARRAY_SIZE(i2c_resources),
|
|
.resource = i2c_resources,
|
|
};
|
|
|
|
static struct platform_device *sh7785lcr_devices[] __initdata = {
|
|
&heartbeat_device,
|
|
&nor_flash_device,
|
|
&r8a66597_usb_host_device,
|
|
&sm501_device,
|
|
&i2c_device,
|
|
};
|
|
|
|
static struct i2c_board_info __initdata sh7785lcr_i2c_devices[] = {
|
|
{
|
|
I2C_BOARD_INFO("r2025sd", 0x32),
|
|
},
|
|
};
|
|
|
|
static int __init sh7785lcr_devices_setup(void)
|
|
{
|
|
i2c_register_board_info(0, sh7785lcr_i2c_devices,
|
|
ARRAY_SIZE(sh7785lcr_i2c_devices));
|
|
|
|
return platform_add_devices(sh7785lcr_devices,
|
|
ARRAY_SIZE(sh7785lcr_devices));
|
|
}
|
|
__initcall(sh7785lcr_devices_setup);
|
|
|
|
/* Initialize IRQ setting */
|
|
void __init init_sh7785lcr_IRQ(void)
|
|
{
|
|
plat_irq_setup_pins(IRQ_MODE_IRQ7654);
|
|
plat_irq_setup_pins(IRQ_MODE_IRQ3210);
|
|
}
|
|
|
|
static void sh7785lcr_power_off(void)
|
|
{
|
|
unsigned char *p;
|
|
|
|
p = ioremap(PLD_POFCR, PLD_POFCR + 1);
|
|
if (!p) {
|
|
printk(KERN_ERR "%s: ioremap error.\n", __func__);
|
|
return;
|
|
}
|
|
*p = 0x01;
|
|
iounmap(p);
|
|
set_bl_bit();
|
|
while (1)
|
|
cpu_relax();
|
|
}
|
|
|
|
/* Initialize the board */
|
|
static void __init sh7785lcr_setup(char **cmdline_p)
|
|
{
|
|
void __iomem *sm501_reg;
|
|
|
|
printk(KERN_INFO "Renesas Technology Corp. R0P7785LC0011RL support.\n");
|
|
|
|
pm_power_off = sh7785lcr_power_off;
|
|
|
|
/* sm501 DRAM configuration */
|
|
sm501_reg = (void __iomem *)0xb3e00000 + SM501_DRAM_CONTROL;
|
|
writel(0x000307c2, sm501_reg);
|
|
}
|
|
|
|
/*
|
|
* The Machine Vector
|
|
*/
|
|
static struct sh_machine_vector mv_sh7785lcr __initmv = {
|
|
.mv_name = "SH7785LCR",
|
|
.mv_setup = sh7785lcr_setup,
|
|
.mv_init_irq = init_sh7785lcr_IRQ,
|
|
};
|
|
|