1da177e4c3
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
335 lines
7.7 KiB
C
335 lines
7.7 KiB
C
/*
|
|
* kernel/busses/i2c-prosavage.c
|
|
*
|
|
* i2c bus driver for S3/VIA 8365/8375 graphics processor.
|
|
* Copyright (c) 2003 Henk Vergonet <henk@god.dyndns.org>
|
|
* Based on code written by:
|
|
* Frodo Looijaard <frodol@dds.nl>,
|
|
* Philip Edelbrock <phil@netroedge.com>,
|
|
* Ralph Metzler <rjkm@thp.uni-koeln.de>, and
|
|
* Mark D. Studebaker <mdsxyz123@yahoo.com>
|
|
* Simon Vogl
|
|
* and others
|
|
*
|
|
* Please read the lm_sensors documentation for details on use.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*
|
|
*/
|
|
/* 18-05-2003 HVE - created
|
|
* 14-06-2003 HVE - adapted for lm_sensors2
|
|
* 17-06-2003 HVE - linux 2.5.xx compatible
|
|
* 18-06-2003 HVE - codingstyle
|
|
* 21-06-2003 HVE - compatibility lm_sensors2 and linux 2.5.xx
|
|
* codingstyle, mmio enabled
|
|
*
|
|
* This driver interfaces to the I2C bus of the VIA north bridge embedded
|
|
* ProSavage4/8 devices. Usefull for gaining access to the TV Encoder chips.
|
|
*
|
|
* Graphics cores:
|
|
* S3/VIA KM266/VT8375 aka ProSavage8
|
|
* S3/VIA KM133/VT8365 aka Savage4
|
|
*
|
|
* Two serial busses are implemented:
|
|
* SERIAL1 - I2C serial communications interface
|
|
* SERIAL2 - DDC2 monitor communications interface
|
|
*
|
|
* Tested on a FX41 mainboard, see http://www.shuttle.com
|
|
*
|
|
*
|
|
* TODO:
|
|
* - integration with prosavage framebuffer device
|
|
* (Additional documentation needed :(
|
|
*/
|
|
|
|
#include <linux/config.h>
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/i2c-algo-bit.h>
|
|
#include <asm/io.h>
|
|
|
|
/*
|
|
* driver configuration
|
|
*/
|
|
#define MAX_BUSSES 2
|
|
|
|
struct s_i2c_bus {
|
|
void __iomem *mmvga;
|
|
int i2c_reg;
|
|
int adap_ok;
|
|
struct i2c_adapter adap;
|
|
struct i2c_algo_bit_data algo;
|
|
};
|
|
|
|
struct s_i2c_chip {
|
|
void __iomem *mmio;
|
|
struct s_i2c_bus i2c_bus[MAX_BUSSES];
|
|
};
|
|
|
|
|
|
/*
|
|
* i2c configuration
|
|
*/
|
|
#ifndef I2C_HW_B_S3VIA
|
|
#define I2C_HW_B_S3VIA 0x18 /* S3VIA ProSavage adapter */
|
|
#endif
|
|
|
|
/* delays */
|
|
#define CYCLE_DELAY 10
|
|
#define TIMEOUT (HZ / 2)
|
|
|
|
|
|
/*
|
|
* S3/VIA 8365/8375 registers
|
|
*/
|
|
#define VGA_CR_IX 0x3d4
|
|
#define VGA_CR_DATA 0x3d5
|
|
|
|
#define CR_SERIAL1 0xa0 /* I2C serial communications interface */
|
|
#define MM_SERIAL1 0xff20
|
|
#define CR_SERIAL2 0xb1 /* DDC2 monitor communications interface */
|
|
|
|
/* based on vt8365 documentation */
|
|
#define I2C_ENAB 0x10
|
|
#define I2C_SCL_OUT 0x01
|
|
#define I2C_SDA_OUT 0x02
|
|
#define I2C_SCL_IN 0x04
|
|
#define I2C_SDA_IN 0x08
|
|
|
|
#define SET_CR_IX(p, val) writeb((val), (p)->mmvga + VGA_CR_IX)
|
|
#define SET_CR_DATA(p, val) writeb((val), (p)->mmvga + VGA_CR_DATA)
|
|
#define GET_CR_DATA(p) readb((p)->mmvga + VGA_CR_DATA)
|
|
|
|
|
|
/*
|
|
* Serial bus line handling
|
|
*
|
|
* serial communications register as parameter in private data
|
|
*
|
|
* TODO: locks with other code sections accessing video registers?
|
|
*/
|
|
static void bit_s3via_setscl(void *bus, int val)
|
|
{
|
|
struct s_i2c_bus *p = (struct s_i2c_bus *)bus;
|
|
unsigned int r;
|
|
|
|
SET_CR_IX(p, p->i2c_reg);
|
|
r = GET_CR_DATA(p);
|
|
r |= I2C_ENAB;
|
|
if (val) {
|
|
r |= I2C_SCL_OUT;
|
|
} else {
|
|
r &= ~I2C_SCL_OUT;
|
|
}
|
|
SET_CR_DATA(p, r);
|
|
}
|
|
|
|
static void bit_s3via_setsda(void *bus, int val)
|
|
{
|
|
struct s_i2c_bus *p = (struct s_i2c_bus *)bus;
|
|
unsigned int r;
|
|
|
|
SET_CR_IX(p, p->i2c_reg);
|
|
r = GET_CR_DATA(p);
|
|
r |= I2C_ENAB;
|
|
if (val) {
|
|
r |= I2C_SDA_OUT;
|
|
} else {
|
|
r &= ~I2C_SDA_OUT;
|
|
}
|
|
SET_CR_DATA(p, r);
|
|
}
|
|
|
|
static int bit_s3via_getscl(void *bus)
|
|
{
|
|
struct s_i2c_bus *p = (struct s_i2c_bus *)bus;
|
|
|
|
SET_CR_IX(p, p->i2c_reg);
|
|
return (0 != (GET_CR_DATA(p) & I2C_SCL_IN));
|
|
}
|
|
|
|
static int bit_s3via_getsda(void *bus)
|
|
{
|
|
struct s_i2c_bus *p = (struct s_i2c_bus *)bus;
|
|
|
|
SET_CR_IX(p, p->i2c_reg);
|
|
return (0 != (GET_CR_DATA(p) & I2C_SDA_IN));
|
|
}
|
|
|
|
|
|
/*
|
|
* adapter initialisation
|
|
*/
|
|
static int i2c_register_bus(struct pci_dev *dev, struct s_i2c_bus *p, void __iomem *mmvga, u32 i2c_reg)
|
|
{
|
|
int ret;
|
|
p->adap.owner = THIS_MODULE;
|
|
p->adap.id = I2C_HW_B_S3VIA;
|
|
p->adap.algo_data = &p->algo;
|
|
p->adap.dev.parent = &dev->dev;
|
|
p->algo.setsda = bit_s3via_setsda;
|
|
p->algo.setscl = bit_s3via_setscl;
|
|
p->algo.getsda = bit_s3via_getsda;
|
|
p->algo.getscl = bit_s3via_getscl;
|
|
p->algo.udelay = CYCLE_DELAY;
|
|
p->algo.mdelay = CYCLE_DELAY;
|
|
p->algo.timeout = TIMEOUT;
|
|
p->algo.data = p;
|
|
p->mmvga = mmvga;
|
|
p->i2c_reg = i2c_reg;
|
|
|
|
ret = i2c_bit_add_bus(&p->adap);
|
|
if (ret) {
|
|
return ret;
|
|
}
|
|
|
|
p->adap_ok = 1;
|
|
return 0;
|
|
}
|
|
|
|
|
|
/*
|
|
* Cleanup stuff
|
|
*/
|
|
static void prosavage_remove(struct pci_dev *dev)
|
|
{
|
|
struct s_i2c_chip *chip;
|
|
int i, ret;
|
|
|
|
chip = (struct s_i2c_chip *)pci_get_drvdata(dev);
|
|
|
|
if (!chip) {
|
|
return;
|
|
}
|
|
for (i = MAX_BUSSES - 1; i >= 0; i--) {
|
|
if (chip->i2c_bus[i].adap_ok == 0)
|
|
continue;
|
|
|
|
ret = i2c_bit_del_bus(&chip->i2c_bus[i].adap);
|
|
if (ret) {
|
|
dev_err(&dev->dev, "%s not removed\n",
|
|
chip->i2c_bus[i].adap.name);
|
|
}
|
|
}
|
|
if (chip->mmio) {
|
|
iounmap(chip->mmio);
|
|
}
|
|
kfree(chip);
|
|
}
|
|
|
|
|
|
/*
|
|
* Detect chip and initialize it
|
|
*/
|
|
static int __devinit prosavage_probe(struct pci_dev *dev, const struct pci_device_id *id)
|
|
{
|
|
int ret;
|
|
unsigned long base, len;
|
|
struct s_i2c_chip *chip;
|
|
struct s_i2c_bus *bus;
|
|
|
|
pci_set_drvdata(dev, kmalloc(sizeof(struct s_i2c_chip), GFP_KERNEL));
|
|
chip = (struct s_i2c_chip *)pci_get_drvdata(dev);
|
|
if (chip == NULL) {
|
|
return -ENOMEM;
|
|
}
|
|
|
|
memset(chip, 0, sizeof(struct s_i2c_chip));
|
|
|
|
base = dev->resource[0].start & PCI_BASE_ADDRESS_MEM_MASK;
|
|
len = dev->resource[0].end - base + 1;
|
|
chip->mmio = ioremap_nocache(base, len);
|
|
|
|
if (chip->mmio == NULL) {
|
|
dev_err(&dev->dev, "ioremap failed\n");
|
|
prosavage_remove(dev);
|
|
return -ENODEV;
|
|
}
|
|
|
|
|
|
/*
|
|
* Chip initialisation
|
|
*/
|
|
/* Unlock Extended IO Space ??? */
|
|
|
|
|
|
/*
|
|
* i2c bus registration
|
|
*/
|
|
bus = &chip->i2c_bus[0];
|
|
snprintf(bus->adap.name, sizeof(bus->adap.name),
|
|
"ProSavage I2C bus at %02x:%02x.%x",
|
|
dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
|
|
ret = i2c_register_bus(dev, bus, chip->mmio + 0x8000, CR_SERIAL1);
|
|
if (ret) {
|
|
goto err_adap;
|
|
}
|
|
/*
|
|
* ddc bus registration
|
|
*/
|
|
bus = &chip->i2c_bus[1];
|
|
snprintf(bus->adap.name, sizeof(bus->adap.name),
|
|
"ProSavage DDC bus at %02x:%02x.%x",
|
|
dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
|
|
ret = i2c_register_bus(dev, bus, chip->mmio + 0x8000, CR_SERIAL2);
|
|
if (ret) {
|
|
goto err_adap;
|
|
}
|
|
return 0;
|
|
err_adap:
|
|
dev_err(&dev->dev, "%s failed\n", bus->adap.name);
|
|
prosavage_remove(dev);
|
|
return ret;
|
|
}
|
|
|
|
|
|
/*
|
|
* Data for PCI driver interface
|
|
*/
|
|
static struct pci_device_id prosavage_pci_tbl[] = {
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_SAVAGE4) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_PROSAVAGE8) },
|
|
{ 0, },
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE (pci, prosavage_pci_tbl);
|
|
|
|
static struct pci_driver prosavage_driver = {
|
|
.name = "prosavage_smbus",
|
|
.id_table = prosavage_pci_tbl,
|
|
.probe = prosavage_probe,
|
|
.remove = prosavage_remove,
|
|
};
|
|
|
|
static int __init i2c_prosavage_init(void)
|
|
{
|
|
return pci_register_driver(&prosavage_driver);
|
|
}
|
|
|
|
static void __exit i2c_prosavage_exit(void)
|
|
{
|
|
pci_unregister_driver(&prosavage_driver);
|
|
}
|
|
|
|
MODULE_DEVICE_TABLE(pci, prosavage_pci_tbl);
|
|
MODULE_AUTHOR("Henk Vergonet");
|
|
MODULE_DESCRIPTION("ProSavage VIA 8365/8375 smbus driver");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
module_init (i2c_prosavage_init);
|
|
module_exit (i2c_prosavage_exit);
|